Microporous carbon material from fish waste for removal of methylene blue from wastewater

Recent advances of piezo-catalysis and photocatalysis for efficient environmental remediation

The efficient degradation of organic pollutants in diverse environmental matrices can be achieved through the synergistic application of piezo-catalysis and photocatalysis. The focus of this study is on understanding the fundamental principles and mechanisms that govern the collaborative action of piezoelectric and photocatalytic materials. Piezoelectric nanomaterials, under mechanical stress, generate piezo-potential, which, when coupled with photocatalysts, enhances the generation and separation of charge carriers. The resulting cascade of redox reactions promotes the degradation of a wide spectrum of organic pollutants. The comprehensive investigation involves a variety of experimental techniques, including advanced spectroscopy and microscopy, to elucidate the intricate interplay between mechanical and photoinduced processes. The influence of key parameters, such as material composition, morphology, and external stimuli on the catalytic performance, is systematically explored. This study contributes to the increasing knowledge of environmental remediation and lays the foundation for the development of advanced technologies using piezo and photocatalysis for sustainable pollutant removal.

Facile hydrothermal synthesis of BiVO4 nanomaterials for degradation of industrial waste

Bismuth Vanadate (BiVO₄) has been synthesized using simple hydrothermal technique while varying the pH of concentrated H₂SO₄. With the increase of pH values (from 06 to 10), the morphology of the synthesized material tuned in the form of nano-spheres and cubes in the range from 50 to 60 nm. The lateral affect tuned the bandgap of BiVO₄ from 2.47 eV to 2.50 eV which is significant in the context of present study. It is worth mentioning that desirous bandgap corresponds to the visible spectrum of the solar light being abundantly available and finds many applications in real life. The synthesized nanomaterial BiVO₄ has been characterized through UV-Vis spectroscopy, X-ray diffraction, Scanning electron microscope and energy-dispersive X-ray (EDX) spectroscopy. The synthesized BiVO₄ has been tested as photocatalyst for degradation of industrial pollutant from Leather Field Industry. Said catalyst (BiVO₄) successfully degraded the industrial pollutant after 3 h under solar light irradiation. Therefore, the BiVO₄ can be regarded as potential photocatalyst for degradation of industrial waste which is highly needed.

Nanotextured CeO2-SnO2 Composite: Efficient Photocatalytic, Antibacterial, and Energy Storage Fibers

Bacterial infections remain a serious and pervasive threat to human health. Bacterial antibiotic resistance, in particular, lowers treatment efficacy and increases mortality. The development of nanomaterials has made it possible to address issues in the biomedical, energy storage, and environmental fields. This paper reports the successful synthesis of CeO₂-SnO₂ composite nanofibers via an electrospinning method using polyacrylonitrile polymer. Scanning and transmission electron microscopy assessments showed that the average diameter of CeO₂-SnO₂ nanofibers was 170 nm. The result of photocatalytic degradation for methylene blue dye displayed enhanced efficiency of the CeO₂-SnO₂ composite. The addition of SnO₂ to CeO₂ resulted in the enhancement of the light absorption property and enriched charge transmission of photoinduced electron-hole duos, which conspicuously contributed to momentous photoactivity augmentation. Composite nanofibers exhibited higher specific capacitance which may be accredited to the synergism between CeO₂ and SnO₂ particles in nanofibers. Furthermore, antibacterial activity was screened against Escherichia coli and CeO₂-SnO₂ composite nanofibers depicted excellent activity. The findings of this work point to new possibilities as an electrode material in energy storage systems and as a visible-light-active photocatalyst for the purification of chemical and biological contaminants, which would substantially benefit environmental remediation processes.

Comparative Adsorption Performance of Carbon-containing Hydroxyapatite Derived Tenggiri (Scomberomorini) and Belida (Chitala) Fish Bone for Methylene Blue

The utilization of fishbone as the carbon source for methylene blue adsorption has been successfully studied. Fishbone was prepared from two kinds of fish such as marine fisheries (ex. Tenggiri) and freshwater fisheries (ex. Belida). The carbons were prepared by carbonation of fishbone powder at  500 °C for 2 h. Physical properties of carbons were characterized using Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), wavelength dispersive X-ray fluorescence (WDXRF), Scanning Electron Microscope (SEM), and hydrophobicity. The carbons were utilized as the adsorbent for removing methylene blue by varying the contact time, initial dye concentration, and temperature. It is concluded that both carbons can very good adsorb the methylene blue. The adsorption performance of carbon (TFC) from Tenggiri fish is better than carbon (BFC) from Belida fish. The adsorption was well fitted with the Langmuir adsorption model (R2 ~ 0.998) and the pseudo-second-order model. This indicated that the dye molecules were adsorbed on the surface-active site of carbon via chemical binding, forming an adsorbate monolayer. Thermodynamic parameters, including the Gibbs free energy (ΔG), enthalpy (ΔH), and entropy (ΔS), indicated that the adsorption of methylene blue onto the carbon from fishbone was spontaneous. Thus, carbon from fishbone can be applied as a low-cost adsorbent to treat industrial effluents contaminated with methylene blue. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Review on Methylene Blue: Its Properties, Uses, Toxicity and Photodegradation

The unavailability of clean drinking water is one of the significant health issues in modern times. Industrial dyes are one of the dominant chemicals that make water unfit for drinking. Among these dyes, methylene blue (MB) is toxic, carcinogenic, and non-biodegradable and can cause a severe threat to human health and environmental safety. It is usually released in natural water sources, which becomes a health threat to human beings and living organisms. Hence, there is a need to develop an environmentally friendly, efficient technology for removing MB from wastewater. Photodegradation is an advanced oxidation process widely used for MB removal. It has the advantages of complete mineralization of dye into simple and nontoxic species with the potential to decrease the processing cost. This review provides a tutorial basis for the readers working in the dye degradation research area. We not only covered the basic principles of the process but also provided a wide range of previously published work on advanced photocatalytic systems (single-component and multi-component photocatalysts). Our study has focused on critical parameters that can affect the photodegradation rate of MB, such as photocatalyst type and loading, irradiation reaction time, pH of reaction media, initial concentration of dye, radical scavengers and oxidising agents. The photodegradation mechanism, reaction pathways, intermediate products, and final products of MB are also summarized. An overview of the future perspectives to utilize MB at an industrial scale is also provided. This paper identifies strategies for the development of effective MB photodegradation systems.

Enhance pore structure of cyanobacteria-based porous carbon by polypropylene to improve adsorption capacity of methylene blue

Porous carbon obtained by co-pyrolysis of plastic and biomass has received a lot of attention due to its excellent adsorption properties, and the pore structure plays an essential role in adsorption performance, however, the pore structure is still not well understood. Herein, we synthesized cyanobacteria-based porous carbon derived from cyanobacteria and polypropylene plastic by one-step method. CPC-800-30% exhibited a high BET surface area (2140 m²/g), pore volume up to 1.44 cm³/g. PP not only improved the pore structure of porous carbon, but also enriched the types of functional groups, such as O-H, N-H, C=O, and -CH, due to dehydroxylation or amino group decreased, resulting in the hydrogen radicals increased, hence PP had positive effect for biomass during co-pyrolysis. Meanwhile, CPC-800-30% showed excellent methylene blue (MB) adsorption capacity (667 mg/g). This work provided a new strategy for enhancing porous carbon structure via using PP as additive.