Characterization of algae residue biochar and its application in methyl orange wastewater treatment

Thermo-chemical behaviour of Dunaliella salina biomass and valorising their biochar for naphthalene removal from aqueous rural environment

Thermo-chemical behavior of a microalgal biomass; Dunaliella salina was investigated through thermo-gravimetric analyses. Fully-grown D. salina biomass were subjected for biochar conversion using pyrolytic treatment at three distinct heating rates such as 2.5, 5, and 15 °C min-1. The kinetic appraisals were explained by using model-free kinetics viz., Kissinger-Akahira-Sanose, Flynn-Waal-Ozawa and Starink iso-conversional correlations with concomitant evaluation of activation energies (Ea). The Ea value is 194.2 kJ mol-1 at 90% conversion in FWO model, which is higher as compared to other two models. Moisture, volatile substances, and other biochemical components of the biomass were volatilized between 400 and 1000 K in two separate thermo-chemical breakdown regimes. Microscopic and surface characterization analyses were carried out to elucidate the elemental and morphological characteristics of the biomass and biochar. Further, the proficiency of the prepared biochar was tested for removing naphthalene from the watery media. The novelty of the present study lies in extending the applicability of biochar prepared from D. salina for the removal of a model polyaromatic hydrocarbon, naphthalene.

Remarkable synergy between sawdust biochar and attapulgite/diatomite after co-ball milling to adsorb methylene blue

Biochar has been recognized as a promising sustainable adsorbent for removing pollutants from wastewater. In this study, two natural minerals, attapulgite (ATP) and diatomite (DE) were co-ball milled with sawdust biochar (pyrolyzed at 600 °C for 2 h) at ratios of 10-40% (w/w) and examined the ability of methylene blue (MB) to be removed from aqueous solutions by them. All the mineral-biochar composites sorbed more MB than both ball milled biochar (MBC) and ball milled mineral alone, indicating there was a positive synergy in co-ball milling biochar with these minerals. The 10% (w/w) composites of ATP:BC (MABC10%) and DE:BC (MDBC10%) had the greatest MB maximum adsorption capacities (modeled by Langmuir isotherm modeling) and were 2.7 and 2.3 times that of MBC, respectively. The adsorption capacities of MABC10% and MDBA10% were 183.0 mg g^-1 and 155.0 mg g^-1 at adsorption equilibrium, respectively. These improvements can be owing to the greater content of oxygen-containing functional groups and higher cation exchange capacity of the MABC10% and MDBC10% composites. In addition, the characterization results also reveal that pore filling, π-π stacking interactions, hydrogen bonding of hydrophilic functional groups, and electrostatic adsorption of oxygen-containing functional groups also contribute prominently to the adsorption of MB. This, along with the greater MB adsorption at higher pH and ionic strengths, suggests the roles in MB adsorption was an electrostatic interaction and an ion exchange mechanism. These results demonstrate that mineral-biochar composites prepared by co-ball milling treatment were promising sorbents of ionic contaminants for environmental applications.

Copper removal from aqueous solution using chemical precipitation and adsorption by Himalayan Pine Forest Residue as Biochar

This research deals with the use of pine residue biochar as an adsorbent for the removal of copper from aqueous solution which is a major component of printed circuit boards from E-waste. Biochar was produced from pine residue such as bark, cone and needle through pyrolysis, and the effect of temperature on biochar properties was assessed. The biochar yield of about 33% and maximum surface area of 368 m²/g was obtained at pyrolysis temperature of 650°C. FTIR analysis revealed the existence of C-O, O-H and C = C functional groups on the surface of biochars. The point of zero charge of pine biochars were in the range 5.55 to 5.75. Batch adsorption studies revealed maximum copper adsorption capacity of 60-81 mg/g at near neutral pH. The batch adsorption data fitted well with Langmuir isotherm and followed the pseudo-second order kinetics. Adsorption of copper onto the biochar surface mainly followed physisorption which was reversible in nature. Desorption study revealed that pine biochar could be reused up to three cycles. Column adsorption data fitted well with Thomas model. These investigations revealed that the pine residue, which otherwise results in adverse environmental impacts, can be converted into useful resource like biochar as a heavy metal adsorbent.