State of art bio-materials as scale inhibitors in recirculating cooling water system: a review article

Colloidal aspects of calcium carbonate scaling in water-in-oil emulsions: A fundamental study using droplet-based microfluidics

HYPOTHESIS

As a mainstream process in the extraction and recovery of crude oil, water is injected into reservoirs in the so-called waterflooding process to facilitate the oil displacement through the wellbore, typically generating water-in-oil (W/O) emulsions. Based on economic considerations, sea water is used in the flooding process; however, the ionic incompatibility between the injected water and the formation water inside the reservoir may precipitate sparingly-soluble inorganic salts (scale). We hypothesize that calcium carbonate (CaCO₃) scale dynamically interacts with cationic surfactants in W/O emulsions, resulting in (i) scale growth retardation and (ii) emulsion destabilization.

EXPERIMENTS

We developed stable W/O emulsions via combining droplet-based microfluidics with multifactorial optimizations to investigate the influence of emulsion properties, such as surfactant type and concentrations, temperature, and pH, as well as calcium ions on the CaCO₃ scaling kinetics and emulsion stability. The CaCO₃ scale was characterized based on particle size and charge, lattice structure, interactions with the surfactant, and time-dependent effects on emulsion stability.

FINDINGS

The interfacial interactions between the cationic surfactant (cetyltrimethylammonium bromide, CTAB) and CaCO₃ retarded scale growth rate, decreased crystal size, and destabilized emulsion within hours as a result of surfactant depletion at the water-oil interface. The surfactant did not affect the crystal structure of scale, which was formed as the most thermodynamically stable crystalline polymorph, calcite, at the ambient condition. This fundamental study may open new opportunities for engineering stable W/O emulsions, e.g., for enhanced oil recovery (EOR), and developing scale-resistant multiphase flows.

Biofilm-induced corrosion inhibition of Q235 carbon steel by anaerobic Bacillus cereus inoculum in simulated cooling water

In this study, the corrosion behavior of Q235 carbon steel (CS) under a Bacillus cereus (B. cereus) inoculum in simulated cooling water was evaluated. The weight loss study proved B. cereus inoculum possessed anticorrosion efficiencies of 92.84% and 73.88% for 3-day and 14-day rotation tests, respectively. The electrochemical measurements indicated that the added B. cereus inoculum increased the charge transfer resistance and reduced corrosion current density. B. cereus cells with strong biofilm-forming capacity were able to adhere onto the Q235 CS surface to form compact biofilms and cause biomineralization. Surface characterization analysis demonstrated that the presence of the B. cereus inoculum reduced the amount of Fe₂O₃ and simultaneously increased the amount of CaCO₃ in corrosion products. The corrosion inhibition mechanisms of the B. cereus inoculum involve forming biofilm, generating a biomineralized layer, and consuming dissolved oxygen. Thus, B. cereus inoculum provides a biological strategy for industrial cooling water anticorrosion application.