Rapid cultivation of anammox sludge based on Ca-alginate cell beads

Implementing a completely autotrophic nitrogen removal over nitrite process using a novel umbrella basalt fiber carrier

The completely autotrophic nitrogen removal over nitrite (CANON) process is significantly hindered by prolonged start-up periods and unstable nitrogen removal efficiency. In this study, a novel umbrella basalt fiber (BF) carrier with good biological affinity and adsorption performance was used to initiate the CANON process. The CANON process was initiated on day 64 in a sequencing batch reactor equipped with umbrella BF carriers. During this period, the influent NH4+-N concentration gradually increased from 100 to 200 mg·L-1, and the dissolved oxygen was controlled below 0.8 mg L-1. Consequently, an average ammonia nitrogen removal efficiency (ARE) and total nitrogen removal efficiency (TNRE) of ∼90 and 80% were achieved, respectively. After 130 days, ARE and TNRE remained stable at 92 and 81.1%, respectively. This indicates a reliable method for achieving rapid start-up and stable operation of the CANON process. Moreover, Candidatus Kuenenia and Candidatus Brocadia were identified as dominant anammox genera on the carrier. Nitrosomonas was the predominant genus among ammonia-oxidizing bacteria. Spatial differences were observed in the microbial population of umbrella BF carriers. This arrangement facilitated autotrophic nitrogen removal in a single reactor. This study indicates that the novel umbrella BF carrier is a highly suitable biocarrier for the CANON process.

Challenges of aerobic granular sludge utilization: Fast start-up strategies and cationic pollutant removal

Aerobic granular sludge (AGS) is a self-aggregated microorganism consortium with pollutant removal properties. The aim of this work is to study and review the application of aerobic granules for water treatment with special focus on new applications and methodologies. Carbon-nitrogen containing pollutants are the classic targets of AGS technology. Carbon and nitrogen removal of AGS are classified as a biodegradation process. More recently, the AGS granules have been studied as sorbent materials for wastewater treatment. In particular, the sorption of cationic pollutants has been studied through biosorption and bioaccumulation mechanisms without distinguishing when one or the other process is involved. AGS conformation made them suitable for complex wastewater treatment. Indeed, several studies have demonstrated the removal of polyvalent cationic pollutants even with higher capacity than conventional sorbent materials. However, this was achieved almost exclusively for synthetic substrates, with single cation evaluation and using in some cases only qualitative measures. For successful industrial AGS application in complex substrates, it is necessary to evaluate and demonstrate the technology in real industrial conditions and reduce the currently long start-up times which limits its utility. Two new strategies have been proposed: autoinducer molecules and the production of artificial granular from common active sludge with commercial alginate. Finally, the increase of research on AGS cations assimilation properties will allow a new point of view, where granules will be materials for the recovery of valuable metals from industrial wastewater streams.