Effect of Fe and Al based coagulants and disinfectants on polyethylene microplastics removal in coagulation process through response surface methodology

Exploring the influence of sludge dewatering agents on Microplastic aging under hydrothermal treatment: Insights from Polylactic Acid microplastics

In this research, we examined the combined effects of hydrothermal treatment and different dewatering agents on the morphological, molecular, and functional properties of Polylactic Acid Microplastics (PLA-MPs). Under hydrothermal treatments, the presence of dewatering agents leads to pronounced alterations in PLA-MPs as evidenced by SEM, showing the compound effects of both treatments. In detail, PFS (polyferric sulfate) results in an enhanced porosity on the surface, PAC (polyaluminum chloride) imparts a distinct roughness, while Fe/PMS (iron/peroxymonosulfate) leads to surface deterioration with the emergence of larger pores. Fe/PMS exhibits the most significant difference in its impact on microplastics in both water and sludge, significantly reducing molecular weight in water, while its effect becomes minimal in sludge. The carbonyl index (CI) predominantly increases across agents in water treatments, with PAC standing out with a CI of 17.50. Conversely, in sludge environments, the CI displays a decreasing trend, especially with Fe/PMS which shows a CI of 15.00. Additionally, employing FTIR and XPS analyses, this study validates the rise in oxygen-centric functional groups on PLA-MPs post hydrothermal treatments, particularly a marked enhancement in C=O and C-O groups due to Fe/PMS. Two-dimensional correlation spectroscopy revealed a distinct sequence of spectral changes in PLA-MPs. The hydrothermal samples in water showed the earliest structural alterations, whereas the presence of iron and persulfate in sludge led to the most pronounced molecular transitions, emphasizing the intricate interactions of the microplastics with different chemicals. This study highlights the impact of hydrothermal treatment and dewatering agents on the properties of the microplastics.

Efficiency of Coagulation/Flocculation for the Removal of Complex Mixture of Textile Fibers from Water

Synthetic fibers enter wastewater treatment plants together with natural fibers, which may affect treatment efficiency, a fact not considered in previous studies. Therefore, the aim of the present study was to evaluate the efficiency of the coagulation/flocculation process for the removal of a mixture of textile fibers from different water matrices. Natural and synthetic fibers (100 mg/L; cotton, polyacrylonitrile, and polyamide) were added to a synthetic matrix, surface water and laundry wastewater and subjected to coagulation/flocculation experiments with ferric chloride (FeCl3) and polyaluminum chloride (PACl) under laboratory conditions. In the synthetic matrix, both coagulants were found to be effective, with FeCl3 having a lesser advantage, removing textile fibers almost completely from the water (up to 99% at a concentration of 3.94 mM). In surface water, all dosages had approximately similar high values, with the coagulant resulting in complete removal. In laundry effluent, the presence of surfactants is thought to affect coagulation efficiency. PACl was found to be effective in removing textile fibers from laundry wastewater, with the lowest removal efficiency being 89% and all dosages having similar removal efficiencies. Natural organic matter and bicarbonates showed a positive effect on the efficiency of FeCl3 in removing textile fibers from surface water. PACl showed better performance in coagulating laundry wastewater while surfactants had a negative effect on FeCl3 coagulation efficiency.