Piezosurgery in Bone Augmentation Procedures Previous to Dental Implant Surgery: A Review of the Literature

Immediate postoperative complications after lateral ridge augmentation - a clinical comparison between bone shell technique and sticky bone

Nowadays, implant dentistry is strongly interconnected to bone augmentation procedures. Lateral ridge augmentation is often an imperative treatment stage for successful, prosthetic-driven implant placement. This study aimed to comparatively analyze the immediate postoperative complications of two horizontal bone grafting procedures: sticky bone and bone shell technique. Records of patients with lateral ridge augmentation were analyzed to identify immediate postoperative complications. The study group included 80 patients divided into 40 control (bone-shell technique - BS) and 40 tests (sticky bone -SB). More patients reported moderate and severe pain in the BS - group (11 patients - 27.5%) than in the SB group (6 patients - 15%). In the BS group, the incidence of severe and moderate trismus, neurosensory disturbances, and important hematoma was higher. There was an increased inflammatory response following the bone shell technique, while the sticky bone technique proved reduced surgical morbidity. There was no difference between the two groups in the risk of dehiscence or infection.

Piezotome Versus Surgical Bur: Which is More Effective in Reducing the Postoperative Pain and Edema Following Open Sinus Lift Surgery?

Objective

The aim of this study was to compare the piezotome versus surgical bur on postoperative edema and pain following open sinus lift surgery.

Materials and methods

This was a double-blinded split mouth randomized clinical trial. The subjects who were candidates for bilateral open sinus lifting in the posterior maxilla were included in this experiment. Each maxillary side was assigned randomly to one group, piezosurgery or surgical diamond bur for sinus lifting. Postoperative pain and edema were evaluated on the second and seventh days after the surgery, using the VAS scale. Data were analyzed by SPSS software.

Results

In this study, 20 subjects including 10 females (50%) and 10 males (50%) with a mean age of 50.87 ± 9.04 years participated. The mean duration of surgery in piezosurgery (240.13 ± 49.5 s) was significantly higher than the surgical bur technique (135.07 ± 43.53 s) (P < 0.001). Pain and edema were significantly decreased on the seventh day postoperatively compared to the second day in both group (P < 0.05). Pain and edema were similar between the two study groups on the second and seventh days after surgery.

Conclusion

The results of this study depicted that the piezosurgery clinical outcomes were similar to surgical bur following open sinus lift surgery.

Limits and Opportunities for Miniaturizing Ultrasonic Surgical Devices Based on a Langevin Transducer

Minimally invasive surgery offers opportunities for reduced morbidities, faster postoperative recovery, and reduced costs, and is a major focus of surgical device innovation. For ultrasonic surgical devices, which offer benefits of high precision, low force, and tissue selectivity in surgical procedures, there exist laparoscopic ultrasonic shears for minimally invasive surgeries that combine tissue cutting with vessel hemostasis and sealing functions. Another approach to laparoscopy that could enable new procedures, and increase the sites of surgeries that could be reached by an ultrasonic device, involves integrating a miniature ultrasonic tool with a flexible surgical robot. However, miniaturization presents challenges in delivering the ultrasonic vibrational energy required to cut hard and soft tissues, partly due to the concomitant small volume of piezoelectric material. This article aims to provide insights into the trade-offs between transducer size, volume of piezoceramic material, resonance frequency, and the achievable displacement amplitude of devices that, consistent with current ultrasonic surgical tools, are based on a bolted Langevin transducer (BLT) and tip. Different configurations of BLTs are studied, including a cascaded version, simple bar versions, and BLTs with different front mass geometries. Results show that a BLT with a larger number of piezoceramic rings exhibits a higher coupling coefficient [Formula: see text] but with the compromise of a lower mechanical Q and stronger nonlinear response at increasing excitation levels. Displacement amplitude is reduced considerably when a BLT is excited at a higher harmonic, where the PZT rings are maintained at a nodal plane, and the resonance frequency shift at increasing excitation levels increases significantly. The electromechanical and dynamic characteristics of a cascaded transducer excited in its third longitudinal mode (L3) are almost equivalent to a much shorter version of a BLT driven at the same frequency but in its first longitudinal mode (L1), showing that a cascaded BLT can be a realistic proxy for studying the dynamics of small BLT devices. A new figure of merit is proposed that is the product of Q , [Formula: see text], and gain, which [Formula: see text] accounts for the gain of cylindrical BLTs which is shown not to be unity. It also proves effective as it incorporates the key factors affecting the achievable displacement amplitude of a BLT, including for BLTs with gain profiles in the front mass. The order of highest to lowest amplitude of a series of six gain-profile BLTs matches the order estimated by the figure of merit. It is shown that a BLT with a stepped profile front mass can achieve displacement that has the potential to cut hard or soft tissue and exhibits the smallest shifts in resonance frequency at increasing excitation levels.

Novel treatment of revision malarplasty with piezosurgery: A case report

BACKGROUND

Reduction malarplasty is a routine clinical procedure among Asian women, but the traditional surgical methods are still associated with serious complications, such as nonunion of the osteotomy sites. Revisional surgery to correct such complications is common, but poor bone healing in the osteotomy area presents a challenge to plastic surgeons. In this report, the authors present a new technique for revision malarplasty that uses the piezosurgery (piezoelectric bone surgery) approach.

PATIENT AND DIAGNOSIS

A 30-year-old female patient underwent reduction malarplasty with titanium plate fixation in the zygomatic region at another hospital 4 years ago, but the root of the zygomatic arch was not fixed. The patient was diagnosed with bone nonunion, facial asymmetry, and soft tissue sagging on the right side of the face after malarplasty.

INTERVENTION

We used piezosurgery to truncate the displaced healed broken end of the zygomatic bone according to the original osteotomy line. Following this, the malar was re-fixed with micro-titanium mesh, and the zygomatic arch was fixed with a titanium plate.

OUTCOME

The patient was followed up for 11 months after the revision procedure. Her facial appearance was satisfactory, and no complications were observed on computed tomography images.

LESSONS

This report presents a novel therapeutic option for surgical revision of failed malarplasty. Piezosurgery can help overcome the limitations of traditional surgical methods by reducing bone resorption, preventing resorption of the bone in revision malarplasty, modifying the degree of inward and upward movement of the zygomatic bone by facilitating adjustment of the position of the drill hole in the cortex of the bone stump for stable fixation. Hence piezosurgery can be a simple, accurate, and non-invasive osteotomy method for revision malarplasty.

Piezoelectric Surgery in the Inferior Alveolar Nerve Lateralization With Simultaneous Implant Placement: A Case Report

The aim of this case report was to describe the inferior alveolar nerve (IAN) lateralization technique using the piezoelectric device for the posterior rehabilitation of an atrophic mandible with implants. The patient presented the absence of elements 35 and 36 associated with a vertical defect impairing the adequate dental implant placement without IAN damage. A full-thickness mucoperiosteal flap was raised, and a bone window was made with a piezoelectric device centralized on the IAN canal position. After dissection, the IAN was moved buccally with a sterile elastic strip. Morse cone 4.0 × 1.5-mm implants were inserted while the IAN remained retracted. At the 4-month follow-up, the screw-retained prosthesis was installed guaranteeing the recovering masticatory function. In conclusion, the case report showed that the IAN lateralization performed with an adequate surgical technique can be successfully indicated for longer implant placement in edentulous atrophic posterior mandible with no permanent neural damage.

Experimental Comparison of the Performance of Cutting Bone and Soft Tissue between Piezosurgery and Conventional Rotary Instruments

Piezosurgery is an innovative technique widely used for osteotomies in the field of oral and maxillofacial surgery. The surgical technique has been clinically supposed to cut mineralized bone selectively with reducing the risk of damage to adjacent soft tissues. However, none of the previous literature has reported any evidence of scientific experiments to examine performance of the piezoelectric device, i.e. the time required for cutting bone and the effect on soft tissues under the standardized conditions. This study was designed to test the hypothesis that cutting time of the piezoelectric device is longer than that of rotary instruments while the cut surface of bone is smoother and soft tissues are less damaged with piezosurgery under the standardized experimental system. We measured the time for cutting bone and soft tissues of rats with the piezoelectric device and rotary instruments. Damage to soft tissues was examined histologically, and the cut surface of bone was investigated using scanning electron microscopy. Our study demonstrated experimentally that piezosurgery provides a smooth cut bony surface with no damage to soft tissues and takes longer time to cut bone than conventional drillings. We propose that piezosurgery is beneficial for medical safety and usability.

Alveolar ridge augmentation with maxillary sinus elevation and split crest: Comparison of 2 surgical procedures

The purpose of this study was to evaluate the clinical and radiological outcomes of 2 piezosurgical split techniques performed in conjunction with the sinus lift.The present retrospective study included 20 patients with edentulism of the posterior maxilla who had undergone the sinus lift and alveolar ridge split treatment separately or the sinus lift combined with the monoblock alveolar ridge split. Differences between these 2 techniques were analyzed.All the surrounding areas successfully produced an adequate bone volume for the insertion of implants. A clinical evaluation showed a mean vertical augmentation of 3.6 ± 0.4 mm in Group A and 3.2 ± 0.7 mm in Group B. With regards to the lateral augmentation, the clinical evaluation gives a mean gain of 5.2 ± 0.3 mm in Group A and 4.9 ± 0.5 mm in Group B. The mean vertical and horizontal bone augmentation recorded for both types of surgical procedures were comparable.The proposed surgical procedures enabled the tridimensional volume of the alveolar ridge to be recreated. This resulted in the creation of a natural contour of hard and soft tissues which enabled a functional and aesthetic rehabilitation of the edentulous posterior maxilla to be obtained.

Transplantation of Autogenous Bone Block With an Osseointegrated Implant: Seedling Technique With Twelve-Month Follow-Up

OBJECTIVE

Loss of teeth frequently results in compound horizontal and vertical alveolar bone defects. An appropriate bone structure is the key for implant placement and bony support of soft tissues. Advanced bone augmentation techniques are required for the reconstruction of these defects. This report will present a new bone block grafting technique with 12-month follow-up.

METHOD

The seedling technique was used to augment the alveolar bone 3-dimensionally with autologous bone block and an osseointegrated implant in a 2-stage procedure. Horizontal and vertical bone loss is revealed after cone beam radiographic examination in the right maxillary lateral incisor area. Initially, the implant was placed at the right maxillary tuber area, where the bone was abundant. After 2-months healing phase, the osseointegrated implant was harvested with the surrounding bone and transplanted to the anterior region of maxilla to augment the horizontal and the vertical components of the recipient site. Transplanted implant inserted into autogenous bone block was fixed with mini plate to the adjacent native bone. Prosthetic restoration was applied 4 months after the transplantation.

RESULTS

Seven months after the first surgery, treatment of anterior bone deficiency was accomplished. The patient was fully satisfied with the function and the esthetics of the restoration. The radiological and clinical examinations at 1-year follow-up evaluation showed successful outcome of transplanted autogenous bone block without any resorption.

CONCLUSION

This clinical report demonstrated that anterior maxillary single-tooth replacement, according to seedling concept of autogenous bone block with osseointegrated implant, is a successful and predictable treatment modality.