Presence of Aeromonas spp in water from drinking-water- and wastewater-treatment plants in Mexico City

From capture to detection: A critical review of passive sampling techniques for pathogen surveillance in water and wastewater

Water quality, critical for human survival and well-being, necessitates rigorous control to mitigate contamination risks, particularly from pathogens amid expanding urbanization. Consequently, the necessity to maintain the microbiological safety of water supplies demands effective surveillance strategies, reliant on the collection of representative samples and precise measurement of contaminants. This review critically examines the advancements of passive sampling techniques for monitoring pathogens in various water systems, including wastewater, freshwater, and seawater. We explore the evolution from conventional materials to innovative adsorbents for pathogen capture and the shift from culture-based to molecular detection methods, underscoring the adaptation of this field to global health challenges. The comparison highlights passive sampling's efficacy over conventional techniques like grab sampling and its potential to overcome existing sampling challenges through the use of innovative materials such as granular activated carbon, thermoplastics, and polymer membranes. By critically evaluating the literature, this work identifies standardization gaps and proposes future research directions to augment passive sampling's efficiency, specificity, and utility in environmental and public health surveillance.

Reviving the "Moore Swab": a Classic Environmental Surveillance Tool Involving Filtration of Flowing Surface Water and Sewage Water To Recover Typhoidal Salmonella Bacteria

The “Moore swab” is a classic environmental surveillance tool whereby a gauze pad tied with string is suspended in flowing water or wastewater contaminated with human feces and harboring enteric pathogens that pose a human health threat. In contrast to single volume “grab” samples, Moore swabs act as continuous filters to “trap” microorganisms, which are subsequently isolated and confirmed using appropriate laboratory methods. Continuous filtration is valuable for the isolation of transiently present pathogens such as human-restricted Salmonella enterica serovars Typhi and Paratyphi A and B.

The “Moore swab” is a classic environmental surveillance tool whereby a gauze pad tied with string is suspended in flowing water or wastewater contaminated with human feces and harboring enteric pathogens that pose a human health threat. In contrast to single volume “grab” samples, Moore swabs act as continuous filters to “trap” microorganisms, which are subsequently isolated and confirmed using appropriate laboratory methods. Continuous filtration is valuable for the isolation of transiently present pathogens such as human-restricted Salmonella enterica serovars Typhi and Paratyphi A and B. The technique was first proposed (1948) to trace Salmonella Paratyphi B systematically through sewers to pinpoint the residence of a chronic carrier responsible for sporadic outbreaks of paratyphoid fever. From 1948 to 1986, Moore swabs proved instrumental to identify long-term human reservoirs (chronic carriers) and long-cycle environmental transmission pathways of S. Typhi and Paratyphi, for example, to decipher endemic transmission in Santiago, Chile, during the 1980s. Despite limitations such as intermittent shedding of typhoidal Salmonella by humans and the effects of dilution, S. Typhi and S. Paratyphi have been recovered from sewers, surface waters, irrigation canals, storm drains, flush toilets, and septic tanks by using Moore swabs. Driven by the emergence of multiple antibiotic-resistant S. Typhi and S. Paratyphi A strains that limit treatment options, several countries are embarking on accelerated typhoid control programs using vaccines and environmental interventions. Moore swabs, which are regaining appreciation as important components of the public health/environmental microbiology toolbox, can enhance environmental surveillance for typhoidal Salmonella, thereby contributing to the control of typhoid fever.

Occurrence of potentially pathogenic nontuberculous mycobacteria in Mexican household potable water: a pilot study

Background

Nontuberculous mycobacteria (NTM) are environmental opportunistic pathogens found in natural and human-engineered waters, including drinking water distribution systems and household plumbing. This pilot study examined the frequency of occurrence of NTM in household potable water samples in Mexico City. Potable water samples were collected from the “main house faucet” and kitchen faucet. The presence of aerobic-mesophilic bacteria (AMB), total coliforms (TC), fecal coliforms (FC) and NTM species were determined. Mycobacteria species were identified by PCR restriction enzyme pattern analysis (PRA) of the 65-kDa heat shock protein gene (hsp65) and sequencing of the hypervariable region 2 (V2) of the 16S rRNA gene and of the rpoB gene.

Results

AMB (<100 CFU/ml) were present in 118 out of 120 samples; only two samples were outside guidelines ranges (>100 CFU/ml). TC and FC were detected in four and one samples, respectively. NTM species were recovered from 16% samples (19/120) and included M. mucogenicum (nine), M. porcinum (three), M. avium (three), M. gordonae (one), M. cosmeticum (one), M. fortuitum (one), and Mycobacterium sp (one). All household water samples that contained NTM complied with the standards required to grade the water as “good quality” potable water.

Conclusion

Household potable water may be a potential source of NTM infection in Mexico City.

Aeromonas presence in drinking water from collective reservoirs and wells in peri-urban area in Brazil

Aeromonas genus is considered an emerging pathogen and its presence in drinking water supplies is a reason to public health concern. This study investigated the occurrence of Aeromonas in samples from collective reservoirs and wells used as drinking water sources in a peri-urban area. A total of 35 water samples were collected from collective reservoirs and 32 from wells bimonthly, from September 2007 to September 2008. Aeromonas spp determination was carried out using a Multiple-Tube Technique. Samples were inoculated into alkaline peptone water and the superficial film formed was transferred to blood agar plates amended with ampicillin. Typical Aeromonas colonies were submitted to a biochemical screening and then to biochemical tests for species differentiation. Aeromonas was detected in 13 (19%) of the 69 samples examined (6 from collective reservoirs and 7 from wells). Concentrations of Aeromonas in collective reservoirs ranged from <0.3 to 1.2 x10(2)MPN/100mL and, in wells, from <0.3 to 2.4 x10(2)MPN/100mL. The most frequent specie in the collective reservoir samples was Aeromonas spp (68%), followed by A. encheleia (14%) and A. allosaccharophila (8%) and A. hydrophila (8%). Aeromonas spp (87%) was the most frequent specie isolated from well samples, followed by A. allosacchariphila (8%), A. encheleia (2%) and A. jandaei (5%). These data show the presence and diversity of Aeromonas genus in the samples analyzed and highlight that its presence in drinking water poses a significant public health concern.

Differentiation of Aeromonas Isolated from Drinking Water Distribution Systems Using Matrix-Assisted Laser Desorption/Ionization-Mass Spectrometry

The genus Aeromonas is one of several medically significant genera that have gained prominence due to their evolving taxonomy and controversial role in human diseases. In this study, matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS) was used to analyze the whole cells of both reference strains and unknown Aeromonas isolates obtained from water distribution systems. A library of over 45 unique m/z signatures was created from 40 strains that are representative of the 17 recognized species of Aeromonas, as well as 3 reference strains from genus Vibrio and 2 reference strains from Plesiomonas shigelloides. The library was used to help speciate 52 isolates of Aeromonas. The environmental isolates were broken up into 2 blind studies. Group 1 contained isolates that had a recognizable phenotypic profile and group 2 contained isolates that had an atypical phenotypic profile. MALDI-MS analysis of the water isolates in group 1 matched the phenotypic identification in all cases. In group 2, the MALDI-MS-based determination confirmed the identity of 18 of the 27 isolates. These results demonstrate that MALDI-MS analysis can rapidly and accurately classify species of the genus Aeromonas, making it a powerful tool especially suited for environmental monitoring and detection of microbial hazards in drinking water.