Applicability of Hyaluronic Acid-Alginate Hydrogel and Ovarian Cells for In Vitro Development of Mouse Preantral Follicles

In Vitro Development of Mouse Preantral Follicle with Using Amniotic Membrane Extract-Loaded Hydrogels

An artificial ovary based on the alginate (ALG) hydrogel has been widely implemented to preserve prepubertal female fertility. However, this platform is not fully capable of successful an ovary microenvironment simulation for follicle development, holding great potential for its improvement. Therefore, this experimental study aimed to evaluate the effect of an amniotic membrane extract (AME) -loaded hydrogel on the mouse preantral follicles in vitro development. In order to have better follicle development, first, the impact of different concentrations of follicle-stimulating hormone (FSH) was evaluated on the mouse preantral follicles encapsulated in ALG. Later, the appropriate dose was adjusted for the follicles encapsulated in the ALG-AME hydrogel. Results demonstrated that 100 mIU/ml FSH showed a significant follicle survival rate compared with 10 mIU/ml FSH (P=0.005). According to MTT assay finding, the rate of weight loss, and rheology evaluations, ALG containing 1 mg/ml AME was identified as an optimal sample of follicle culture instead of other AME concentrations. Follicle diameter significantly increased in the ALG-AME 1 hydrogel compared with the ALG control group without AME (P=0.027). The storage modulus of ALG-AME 1 was 773 Pa and retained the follicle morphology for 13 days. No statistically substantial difference was seen in survival, antrum cavity formation, and competent oocyte in terms of the normal chromosomal arrangement and meiotic spindle rate in comparison with the control group. It can be concluded that ALG-AME 1 could not significantly impact the mouse preantral follicle.

Restoring Ovarian Fertility and Hormone Function: Recent Advancements, Ongoing Efforts and Future Applications

The last 20 years have seen substantial improvements in fertility and hormone preservation and restoration technologies for a growing number of cancer survivors. However, further advancements are required to fill the gaps for those who cannot use current technologies or to improve the efficacy and longevity of current fertility and hormone restoration technologies. Ovarian tissue cryopreservation (OTC) followed by ovarian tissue transplantation (OTT) offers those unable to undergo ovarian stimulation for egg retrieval and cryopreservation an option that restores both fertility and hormone function. However, those with metastatic disease in their ovaries are unable to transplant this tissue. Therefore, new technologies to produce good-quality eggs and restore long-term cyclic ovarian function are being investigated and developed to expand options for a variety of patients. This mini-review describes current and near future technologies including in vitro maturation, in vitro follicle growth and maturation, bioprosthetic ovaries, and stem cell applications in fertility restoration research by their proximity to clinical application.

Thiol-yne click crosslink hyaluronic acid/chitosan hydrogel for three-dimensional in vitro follicle development

There is a great deal of potential for in vitro follicle growth to provide an alternative approach to fertility preservation. This strategy reduces the possibility of cancer cells re-exposure after transplantation, and it does not require hormone stimulation. Adopting a three-dimensional (3D) culture method helps preserve the architecture of the follicle and promotes the maturity of oocytes. In order to maintain follicle morphology, enhance the quality of mature oocytes, and facilitate meiotic spindle assembly, the current work aimed to develop the 3D in vitro preantral mouse follicle culture method. Thiolated chitosan-co-thiolated hyaluronic (CSHS) hydrogel was designed to evaluate the effects of biomaterials on ovarian follicle development. Isolated follicles from mouse ovaries were randomly divided into alginate (Alg) as a 3D control, thiolated hyaluronic acid (HASH), and CSHS groups. Single follicle was encapsulated in each hydrogel, and performed for 10 days and subsequently ovulated to retrieve mature oocytes on day 11. CSHS hydrogel promoted follicle survival and oocyte viability with maintained spherical morphology of follicle. Matured oocytes with normal appearance of meiotic spindle and chromosome alignment were higher in the CSHS group compared with those in the Alg and HASH groups. Furthermore, CSHS increased expression level of folliculogenesis genes (TGFβ-1, GDF-9) and endocrine-related genes (LHCGR, and FSHR). With various experimental setups and clinical applications, this platform could be applied as an alternative method to in vitro follicle culture with different experimental designs and clinical applications in the long-term period.

Effect of hyaluronic acid-enriched transfer medium on frozen-thawed embryo transfer outcomes in RIF patients: a single-centre retrospective study

Introduction

Many patients who undergo assisted reproductive technology (ART) suffer from recurrent implantation failure (RIF). The addition of hyaluronic acid (HA) to the transfer medium is one of several methods to improve pregnancy outcomes. We investigated whether HA could improve the live birth and clinical pregnancy rates of RIF patients.

Methods

This study included 248 RIF patients, who were divided into two groups: the control (CTL) group (n=137), which received transfer medium without HA, and the HA group (n=111), which received transfer medium with HA. The two groups were compared according to the ART outcome.

Results

The primary outcomes were the clinical pregnancy and live birth rates. Secondary outcomes include a positive urine pregnancy test, the implantation, ongoing pregnancy, multiple pregnancy, clinical miscarriage, and ectopic pregnancy rates, foetal or congenital defects, obstetric complications, infant birth weight and any related adverse events. Regarding the primary outcomes, the clinical pregnancy rate was significantly higher in the HA group than in the control group, and there was no significant difference in the live birth rate (LBR) between the HA and control groups. Regarding the secondary outcomes, the implantation, multiple pregnancy and ectopic pregnancy rates were similar between the two groups.

Discussion

Our findings supported the conclusion that HA can improve the clinical pregnancy rate of patients with RIF undergoing FET cycles, but the live birth rate was not significantly improved with the addition of HA to the traditional transfer medium.

Novel Approaches Used in Ovarian Tissue Transplantation for Fertility Preservation: Focus on Tissue Engineering Approaches and Angiogenesis Capacity

Due to the impact of the modern lifestyle, female infertility has been reduced because of different reasons. For example, in combined chemotherapeutic therapies, a small fraction of cancer survivors has faced different post-complications and side effects such as infertility. Besides, in modern society, delayed age of childbearing has also affected fertility. Nowadays, ovarian tissue cryopreservation and transplantation (OTC/T) is considered one of the appropriate strategies for the restoration of ovarian tissue and bioactivity in patients with the loss of reproductive function. In this regard, several procedures have been considered to improve the efficacy and safety of OTT. Among them, a surgical approach is used to transplant ovaries into the optimal sites, but the existence of ischemic changes and lack of appropriate revascularization can lead to bulk follicular atresia. Besides, the role of OTC/T is limited in women of advanced maternal age undergoing lifesaving chemo-radiation. As a correlate, the development of de novo approaches with efficacious regenerative outcomes is highly welcomed. Tissue engineering shows high therapeutic potentialities to restore fertility in males and females using the combination of biomaterials, cells, and growth factors. Unfortunately, most synthetic and natural materials are at the experimental stage and only the efficacy has been properly evaluated in limited cases. Along with these descriptions, strategies associated with the induction of angiogenesis in transplanted ovaries can diminish the injuries associated with ischemic changes. In this review, the authors tried to summarize recent techniques, especially tissue engineering approaches for improving ovarian function and fertility by focusing on angiogenesis and neovascularization.

Three-Dimensional Culture for In Vitro Folliculogenesis in the Aspect of Methods and Materials

In vitro ovarian follicle culture is a reproduction technique used to obtain fertilizable oocytes, for overcoming fertility issues due to premature ovarian failure. This requires the establishment of an in vitro culture model that is capable of better simulating the in vivo ovarian growth environment. Two-dimensional (2D) culture systems have been successfully set up in rodent models. However, they are not suitable for larger animal models as the follicles of larger animals cultured in 2D culture systems often lose their shape due to dysfunction in the gap junctions. Three-dimensional (3D) culture systems are more suitable for maintaining follicle architecture, and therefore are proposed for the successful in vitro culturing of follicles in various animal models. The role of different methods, scaffolds, and suspension cultures in supporting follicle development has been studied to provide direction for improving in vitro follicle culture technologies. The three major strategies for in vitro 3D follicle cultures are discussed in this article. First, the in vitro culture systems, such as microfluidics, hanging drop, hydrogels, and 3D-printing, are reviewed. We have focused on the 3D hydrogel system as it uses different materials for supporting follicular growth and oocyte maturation in several animal models and in humans. We have also discussed the criteria used for biomaterial evaluations such as solid concentration, elasticity, and rigidity. In addition, future research directions for advancing in vitro 3D follicle culture system are discussed. Impact statement A new frontier in assisted reproductive technology is in vitro tissue or follicle culture, particularly for fertility preservation. The in vitro three-dimensional (3D) culture technique enhances follicular development and provides mature oocytes, overcoming the limitations of traditional in vitro two-dimensional cultures. Polymer biomaterials have good compatibility and retain the physiological structure of follicles in the 3D culture system. Utilizing hybrid in vitro culture materials by merging matrix, hydrogel, and unique patterned materials may facilitate follicular growth in the future.

Biomaterials and advanced technologies for the evaluation and treatment of ovarian aging

Ovarian aging is characterized by a progressive decline in ovarian function. With the increase in life expectancy worldwide, ovarian aging has gradually become a key health problem among women. Over the years, various strategies have been developed to preserve fertility in women, while there are currently no clinical treatments to delay ovarian aging. Recently, advances in biomaterials and technologies, such as three-dimensional (3D) printing and microfluidics for the encapsulation of follicles and nanoparticles as delivery systems for drugs, have shown potential to be translational strategies for ovarian aging. This review introduces the research progress on the mechanisms underlying ovarian aging, and summarizes the current state of biomaterials in the evaluation and treatment of ovarian aging, including safety, potential applications, future directions and difficulties in translation.