Effect of Immediate Dentin Sealing on the Bonding Performance of Indirect Restorations: A Systematic Review

The popular immediate dentin sealing (IDS) technique is used to improve the bond strength of indirect restorations. This systematic review assessed whether bond strength is affected by the type of aging conditions, bonding agents, flowable resin composites, impression materials, temporary materials, and/or resin cement used within the IDS procedure. A comprehensive database search of PubMed, Embase, Scopus, Ovid Medline, Web of Sciences, Cochrane Library, Dentistry & Oral Sciences Source, and ProQuest was carried out up to 30 January 2024 without publication year or language limitations. Only in vitro full-texts regarding the effect of IDS on bond strength were included, and the quality of their methods was assessed via a Risk of Bias (RoB) test. In total, 1023 pertinent studies were initially found, and 60 articles were selected for review after screening for the title, abstract, and full texts. IDS application improves the bond strength of indirect restorations to dentin and reduces the negative effects of temporary materials on the bond durability of final indirect restorations. Filled dentin bonding agents or combinations with flowable resin composite are preferred to protect the IDS layer from conditioning procedures.

Appropriate Immediate Dentin Sealing to Improve the Bonding of CAD/CAM Ceramic Crown Restorations

This study aimed to use quantitative and qualitative evaluations based on micro-tensile bond strength (μTBS) to clarify the appropriate immediate dentin sealing (IDS) approach for improving the bonding of CAD/CAM ceramic crown restorations. Forty-eight extracted human molars were prepared to obtain standardized abutment specimens and divided into three groups: no IDS (group C: control), IDS performed by a single application of an all-in-one adhesive system (group A), and IDS performed by the combined application of an adhesive system and a flowable resin composite (group F). All specimens were restored with a ceramic crown fabricated by a chair-side CAD/CAM system and were divided into no-stress and stressed groups. After cyclic loading (78.5 N; total, 3 × 105 cycles; 90 cycles/min) on the specimens in the stressed group, all specimens were sectioned. The μTBS values for the occlusal and mesioaxial walls were measured (n = 16) and analyzed statistically. The quantitative bonding performance of groups A and F were superior to that of group C, regardless of the cyclic loading and abutment wall conditions. Group F showed the maximum bond strength and the highest bond durability in the qualitative bonding performance even under the cyclic loading condition simulating clinical mastication.

Significance of immediate dentin sealing and flowable resin coating reinforcement for unfilled/lightly filled adhesive systems

BACKGROUND

Immediate dentin sealing implies applying an adhesive system to dentin directly after tooth preparation, before impression. The technique is universal (inlays, onlays, veneers, crowns) and well documented clinically and experimentally. Different types of dentin bonding agents (DBAs) are available on the market. Major differences lie in the thickness of the hybrid layer and overlaying adhesive resin (filled vs. unfilled/lightly filled adhesives).

OBJECTIVE

The objective of this work is to provide precise clinical instructions and present new experimental data about the bond strength of five DBAs (Optibond FL, Scotchbond MP, Single Bond Plus, Clearfil SE Bond, and Scotchbond Universal) used conventionally (dentin sealed at the time of restoration delivery) or with immediate dentin sealing, as well as with an additional flowable resin coating.

METHODS

Seventy-five human molars were selected, restored/tested according the microtensile bond strength method. Fifteen groups (n=5) were obtained from the combination of the five DBAs and three application modes: delayed dentin sealing, immediate dentin sealing and immediate dentin sealing with flowable resin coating.

RESULTS

It appears that immediate dentin sealing was confirmed to significantly improve the bond strength of all tested adhesives. The use of a flowable resin coating reinforcement after immediate dentin sealing increased the microtensile bond strength of all unfilled/lightly filled adhesives (from 233% of increase for ScotchBond MP, up to 560% for Clearfil SE Bond) and maintained the performance of the 3-step golden standard adhesive. Optibond FL used with (52.51 MPa) or without (54.75 MPa) additional flowable resin coating and Clearfil SE Bond (45.64 MPa) used with flowable resin coating provided the best results.

CLINICAL SIGNIFICANCE

The original immediate dentin sealing (IDS) technique implies the use of a filled DBA. With unfilled/lightly filled adhesives, it is suggested to reinforce IDS with an additional flowable resin coating. This seems especially paramount to the performance of simplified adhesive systems to protect the thin bonding interface from oxygen inhibition and preserve IDS layer during predelivery cleaning of the preparation. The clinical reinforcement of unfilled/lightly filled IDS with flowable resin composite is encouraged for more predictable bonding.

Effect of immediate dentin sealing applications on bonding of CAD/CAM ceramic onlay restoration

The effects of immediate dentin sealing (IDS) applications on the bonding of computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic onlay restorations after cyclic loading were examined. Standardized mesial-distal-occlusal-palatal cavities in 32 extracted human molars were prepared. The cavities were divided into four groups: those receiving thin-layered (T), slope-shaped (S), and base-shaped (B) sealing, and the non-sealing group (N) as a control. The intra-cavity dentin walls of the T, S, and B groups were sealed with an all-in-one adhesive and a flowable composite. All cavities were scanned; hence, CAD/CAM onlays were fabricated using ceramic blocks and bonded with a resin cement system. Cyclic loading was applied and the microtensile bond strength (μ-TBS) was measured. It was found that IDS application improved not only the μ-TBS, but also the bonding reliability and durability of the CAD/CAM restoration. In particular, the S restoration exhibited the highest-performance as regards both robust bond strength and stable bonding.

Flexural strength of fiber reinforced posts after mechanical aging by simulated chewing forces

This study evaluated the effect of simulated chewing forces on the flexural strength of fiber reinforced posts (FRPs). Four different brands of FRPs were selected as main group for the study: RelyX Fiber Post (RX), IceLight (ICE), Unicore Posts (UC), FlouroPost (FP). Ten posts in each main group didn't receive any aging process and tested as baseline (BL), other ten posts were subjected to simulated chewing forces/mechanical aging (MA) as follows: Post spaces were prepared in acrylic with drill. Depth of preparation was adjusted to leave 4-mm coronal part of posts protruding from canals. Coronal parts were incrementally restored with resin-composite (Clearfil Majesty Posterior A2, Kuraray, Osaka, Japan). Prepared samples were subjected to chewing cycles in a chewing simulator (Chewing Simulator CS-4, Mechatronik, Germany). Flexural strengths of all groups were measured with three-point bending test. Data were analyzed by two-way ANOVA and Tukey's test (α = 0.05). After MA, flexural strengths of all posts were significantly decreased when compared with BL for all FRPs tested (p < 0.05). At BL, highest flexural strength values were obtained for ICE. After MA, similar to BL, highest flexural strength values were obtained for ICE. Only RX showed statistically significant difference when compared with ICE (p < 0.05). UC and FP showed similar flexural strength values with ICE (p > 0.05). It may be concluded that chewing forces on post-core systems may reduce the flexural strengths of FRPs.