Systematic review of computed tomography parameters used for the assessment of subchondral bone in osteoarthritis

OBJECTIVE

To systematically review the published parameters for the assessment of subchondral bone in human osteoarthritis (OA) using computed tomography (CT) and gain an overview of current practices and standards.

DESIGN

A literature search of Medline, Embase and Cochrane Library databases was performed with search strategies tailored to each database (search from 2010 to January 2023). The search results were screened independently by two reviewers against pre-determined inclusion and exclusion criteria. Studies were deemed eligible if conducted in vivo/ex vivo in human adults (>18 years) using any type of CT to assess subchondral bone in OA. Extracted data from eligible studies were compiled in a qualitative summary and formal narrative synthesis.

RESULTS

This analysis included 202 studies. Four groups of CT modalities were identified to have been used for subchondral bone assessment in OA across nine anatomical locations. Subchondral bone parameters measuring similar features of OA were combined in six categories: (i) microstructure, (ii) bone adaptation, (iii) gross morphology (iv) mineralisation, (v) joint space, and (vi) mechanical properties.

CONCLUSIONS

Clinically meaningful parameter categories were identified as well as categories with the potential to become relevant in the clinical field. Furthermore, we stress the importance of quantification of parameters to improve their sensitivity and reliability for the evaluation of OA disease progression and the need for standardised measurement methods to improve their clinical value.

Advanced Arthritis of the Carpus: Preoperative Planning Practices of 337 Hand Surgeons

Background  Surgical procedure selection for carpal arthritis depends on which articular surfaces are affected, but there is no consensus on how to preoperatively evaluate cartilage surfaces. Despite advances in cross-sectional imaging, the utility of advanced imaging for preoperative decision-making has not been well established. Objectives  Our objective was to assess if there is an added value to presurgical advanced imaging or diagnostic procedures in planning for carpal arthrodesis or carpectomy and to determine what imaging or diagnostic procedures influence surgical treatment options. Methods  A seven-question survey was sent to 2,400 hand surgeons. Questions assessed which articular surfaces surgeons consider important for decision-making, which imaging modalities surgeons employ, and how often surgeons utilize diagnostic arthroscopy before performing carpectomy or arthrodesis procedures. Results  A total of 337 (14%) surveys were analyzed. The capitolunate articulation (alone or in combination) was most frequently reported to impact surgical decision-making (48.1%). Most surgeons (86.6%) reported that standard plain radiographs are usually sufficient. Few surgeons reported always obtaining magnetic resonance imaging (MRI) or computed tomography (CT), with 44.2% of surgeons believing that MRI is never useful and 38.4% believing that CT is never useful. Most surgeons (68.2%) reported that they never perform wrist arthroscopy as part of their decision-making process. Conclusions  This study provides information on the decision-making process in the surgical management of carpal arthritis. Given advances in cross-sectional imaging, further studies are needed to determine the utility of MRI and CT for the planning of surgical procedures in the treatment of arthritis of the carpus. Level of Evidence  Level 4.

The feasibility study of stress position device simulating standing weight-bearing applied in computed tomography examination

BACKGROUND

In order to simulate weight-bearing Computed Tomography (CT) examination, this study designed a simple stress position device. By analyzing the relevant data of stress position footprints and weight-bearing position footprints, the feasibility of the stress position device to simulate standing weight-bearing was verified.

METHODS

This study randomly selected 25 volunteers for standing weight-bearing and stress position footprints collection, and measured the relevant indicators of stress position footprints and standing weight-bearing position footprints. Two foot and ankle surgeons conducted two measurements respectively on the footprints. Intra-observer and inter-observer reliability were calculated using intra-class correlation coefficients (ICC). Pearson correlation coefficient, ICC, scatter plot analysis, and paired t-test were used to analyze the stress and weight-bearing position data.

RESULTS

The intra-observer and inter-observer measurement values were reliable. There was a certain degree of correlation between the stress position footprints and weight-bearing position footprints in terms of Pearson correlation coefficient, ICC, and scatter plot analysis. Paired t-tests showed significant differences in Clarke angle (t 2.636, p .012), C-S index (t 10.568, p .000), arch indx (t 2.176, p .035), and arch lower angle (t 6.246, p .000).

CONCLUSION

The stress position device can generate a certain degree of stress, and after further optimization and improvement of the stress position device, it is feasible to apply it to weight-bearing CT examination in clinical settings.

Pre-operative imaging for surgical decision-making and the frequency of wrist arthrodesis and carpectomy procedures: a scoping review

OBJECTIVES

Our objectives were to (1) analyze the imaging modalities utilized pre-operatively that influence surgical decision-making for wrist arthrodesis and carpectomy procedures and (2) determine the type and frequency of these procedures for the treatment of wrist arthritis.

MATERIALS AND METHODS

This review was performed according to the guidelines of PRISMA Extension for Scoping Reviews. Using PubMed, Embase, and Scopus, peer-reviewed literature from 2011 to 2022 was searched for use of imaging in pre-operative decision-making for wrist arthrodesis and carpectomy surgical procedures. Data were compiled to determine the type(s) of imaging modalities used pre-operatively and types of surgical techniques reported in the literature.

RESULTS

Of 307 articles identified, 35 articles satisfied eligibility criteria, with a total of 1377 patients (68% men; age mean, 50.9 years [range, 10-81]) and 1428 wrist surgical interventions. Radiography was reported for pre-operative planning in all articles for all patients. Pre-operative cross-sectional imaging was reported in 2 articles (5.7%), but no articles reported detailed data on how CT or MRI influenced pre-operative wrist arthrodesis and carpectomy procedure decision-making. A dozen different types of surgical techniques were reported. The four most common procedures were four-corner arthrodesis with scaphoid excision (846, 59%), proximal row carpectomy (239, 17%), total wrist arthrodesis (130, 9%), and scaphocapitate arthrodesis (53, 4%).

CONCLUSION

Radiography is always used in pre-operative decision-making, but the literature lacks data on the influence of CT and MRI for selecting among a dozen different types of wrist arthrodesis and carpectomy procedures.

Automatic software-based 3D-angular measurement for Weight-Bearing CT (WBCT) provides different angles than measurement by hand

BACKGROUND

Purpose of this study was to compare automatic software-based angular measurement (AM, Autometrics, Curvebeam, Warrington, PA, USA) with previously validated measurement by hand (MBH) regarding angle values and time spent for the investigator for Weight-Bearing CT (WBCT).

METHODS

Five-hundred bilateral WBCT scans (PedCAT, Curvebeam, Warrington, PA, USA) were included in the study. Five angles (1st - 2nd intermetatarsal angle, talo-metatarsal 1-angle (TMT) dorsoplantar and lateral projection, hindfoot angle, calcaneal pitch angle) were measured with MBH and AM on the foot/ankle (side with pathology). Angles and time spent of MBH and AM were compared (t-test, homoscedatic).

RESULTS

The specific pathologies were ankle osteoarthritis/instability, n = 147 (29%); Haglund deformity/Achillodynia, n = 41 (8%); forefoot deformity, n = 108 (22%); Hallux rigidus, n = 37 (7%); flatfoot, n = 35 (7%); cavus foot, n = 10 (2%); osteoarthritis except ankle, n = 82 (16%). The angles differed between MBH and AM (each p < 0.001) except the calcaneal pitch angle (p = 0.05). The time spent for MBH / AM was 44.5 ± 12 s / 1 ± 0 s on average per angle (p < 0.0011).

CONCLUSIONS

AM provided different angles as MBH and can currently not be considered as validated angle measurement method. The investigator time spent is 97% lower for AM (1 s per angle) than for MBH (44.5 s per angle). Cases with correct angles in combination with almost no time spent showed the real potential of AM. The AM system will have to become reliable (especially in diminishing positive and negative angle values as defined) and valid which has to be proven by planned studies in the future.

LEVEL OF EVIDENCE

Level III.

Semi-automatic software-based 3D-angular measurement for Weight-Bearing CT (WBCT) in the foot provides different angles than measurement by hand

BACKGROUND

The purpose of this study was to compare semi-automatic software-based angular measurement (SAM) with previously validated measurement by hand (MBH) regarding angle values and time spent for the investigator for Weight-Bearing CT (WBCT).

METHODS

In this retrospective comparative study, five-hundred bilateral WBCT scans (PedCAT, Curvebeam, Warrington, PA, USA) were included in the study. Five angles (1st - 2nd intermetatarsal angle (IM), talo-metatarsal 1-angle (TMT) dorsoplantar and lateral projection, hindfoot angle, calcaneal pitch angle) were measured with MBH and SAM (Bonelogic Ortho Foot and Ankle, Version 1.0.0-R, Disior Ltd, Helsinki, Finland) on the right/left foot/ankle. The angles and time spent of MBH and SAM were compared (t-test, homoscesdatic).

RESULTS

The angles differed between MBH and SAM (mean values MBH/SAM; IM, 9.1/13.0; TMT dorsoplantar, -3.4/8.2; TMT lateral. -6.4/-1.1; hindfoot angle, 4.6/21.6; calcaneal pitch angle, 20.5/20.1; each p < 0.001 except the calcaneal pitch angle, p = 0.35). The time spent for MBH / SAM was 44.5 ± 12 s / 12 ± 0 s on average per angle (p < 0.001).

CONCLUSIONS

SAM provided different angles as MBH (except calcaneal pitch angle) and can currently not be considered as validated angle measurement method (except calcaneal pitch angle). The investigator time spent is 73% lower for SAM (12 s per angle) than for MBH (44.5 s per angle). SAM might be an important step forward for 3D-angle measurement of WBCT when valid angles are provided.

Understanding Radiographic Measurements Used in Foot and Ankle Surgery

Given the high volume of patient visits for foot and ankle complaints, developing a systematic approach to evaluation of foot and ankle pathology is important for orthopaedic providers. A thorough evaluation of weight-bearing radiographs is essential to differentiate acute and chronic injury from normal findings to dictate treatment. Radiographic changes and varying degrees of deformity can influence surgical considerations. The purpose of this article was to review and define radiographic measurements relevant to surgical decision making for common foot and ankle pathologies and treatment.

An Innovative Weightbearing Device for Weightbearing 3-Dimensional Imaging for Foot and Ankle Surgery Preoperative Planning

Three-dimensional preoperative planning has demonstrated multiple surgical advantages. Currently, we cannot carry out preoperative 3-dimensional planning of foot and ankle orthopedics in most hospitals due to the impossibility of performing weightbearing CT imaging. Our objective is to describe and evaluate an innovative accessible, simple, and effective device that simulates standing while in a supine position, to obtain 3-dimensional images supporting bodyweight load with a conventional CT machine. From a group of 30 volunteers, 10 patients were randomly selected and pressure and its distribution were analyzed while in a standing position in both feet. Differences between both feet were considered normal intrapersonal variability. Subsequently, the right footprint of the same 10 subjects was evaluated in the proposed loading device. Then, their pressures and distribution were compared with respect to standing and with respect to intrapersonal variability. The mean total standing pressure was 93 Kpa (standard deviation [SD] 14.32), which was reduced to 81.95 Kpa (SD 19.54) in the loading device. The load device reduced the pressure by a mean of16% (SD 22% (range -25% to -0.03%). At the hindfoot level, the loading device increased pressure by a mean of 20.59 Kpa, which expressed percentage implies an increase of 14% compared to standing. Due to its easy construction and effectiveness, this is the first device that opens the door of foot and ankle orthopedics in any hospital to 3D preoperative planning and the benefits derived from it.

The C-sign in normal feet: a prospective study and novel imaging algorithm for subtalar joint tarsal coalition

OBJECTIVE

The C-sign on lateral radiographs has been subject to considerable debate with respect to its reliable association to subtalar joint tarsal coalition. The purpose of this study was to determine to what degree subtalar joint pronation factors into (a) the appearance of both complete and incomplete type A C-signs and (b) the conspicuity of the middle facet in both flatfeet and rectus feet.

STUDY DESIGN

Forty-seven normal adult volunteers were enrolled into the study with a total of 92 feet, of which 42 were flexible flatfeet and 50 were rectus feet with normal subtalar joint range of motion. Lateral weight-bearing radiographs were taken of each foot in a position of (a) standing and (b) maximum subtalar joint pronation. Investigators evaluated images for the visibility of the middle facet, and the presence or absence of a continuous or interrupted type A C-sign.

PRINCIPAL RESULTS

No continuous C-signs were produced with extreme pronation in either the rectus/normal or flatfoot populations. Three incomplete type A C-signs were produced with pronation, two of which were in rectus feet. Two absent middle facet signs were also produced with pronation. Absent visualization of the facet had high positive and negative predictive values (1.00 and 0.99 respectively) for the presence of an incomplete C-Sign.

MAJOR CONCLUSIONS

The standard, routine lateral foot/ankle radiographic image protocol for suspected talocalcaneal coalition should be modified routinely positioning the foot maximally supinated, thereby minimizing the possibility of producing C-signs (complete or type A incomplete) and/or absent middle facet signs with pronation in either normal or flatfeet. A novel algorithmic approach can then be simply applied to determine when ancillary CT scanning is warranted for suspected posterior facet coalition.

The use of digital tomosynthesis in rheumatology: a systematic review of the literature focused on four diseases

BACKGROUND AND AIMS

Digital tomosynthesis has proven useful in the evaluation of damage to joints. This study aims to describe the most common digital tomosynthesis findings for four rheumatological entities and to compare the usefulness of this technique with that of other imaging techniques.

MATERIALS AND METHODS

Following the PRISMA guidelines, we systematically searched the literature for articles about the use of digital tomosynthesis in rheumatoid arthritis, osteoarthritis, spondyloarthritis, and gout. We used the QUADAS-2 (Quality Assessment of Diagnostic Accuracy Studies) criteria to evaluate the quality of the articles included.

RESULTS

We included 13 articles. For rheumatoid arthritis, osteoarthritis, and spondyloarthritis, digital tomosynthesis detected bone abnormalities better than plain-film X-rays; however, for gout, the results were variable.

CONCLUSIONS

Digital tomosynthesis can play an important role in the evaluation of skeletal abnormalities in rheumatological disease, especially compared to plain-film X-rays.

Clinical value of digital tomographic fusion imaging in the diagnosis of avascular necrosis of the femoral head in adults

Background

To explore the clinical significance of digital tomographic fusion imaging in the diagnosis of avascular disease of the femoral head in adults.

Methods

Eighty-two adult patients with avascular necrosis of the femoral head confirmed by MRI in the department of orthopedics of our hospital were studied retrospectively. The related signs of adult avascular necrosis of the femoral head were diagnosed by digital tomographic fusion imaging, and the detection rates of digital X-ray (DR) and digital tomosynthesis (DTS) were compared to clarify the clinical value of digital tomographic fusion imaging in the diagnosis of adult avascular necrosis of the femoral head.

Results

DTS detected DR and 78 cases identified 55 cases. Taking the results of CT/MRI as the gold standard, the sensitivity, specificity, positive predictive value, and negative predictive value of DR and DTS in the diagnosis of ANFH were calculated. There was a significant difference in the detection rate between the two methods (P < 0.05).

Conclusion

The digital tomographic fusion imaging technique has the advantages of high detection rate and excellent image quality, is economical, and is worth popularizing. For those with negative X-rays, DTS diagnosis and CT or/and MRI can avoid unnecessary CT and MRI examinations, which is helpful to reduce the waste of medical resources.

Outcomes of management of displaced intra-articular calcaneal fractures

Despite the advances in operative management, displaced intra-articular calcaneal fractures (DIAFCs) are often associated with long term sequelae, permanent disability, a considerable reduction in quality of life, and a high socio-economic cost. Randomized controlled trials have shown that patient reported outcomes of surgery are no better than those of nonoperative management. Methodological flaws and selection bias may have influenced the results, however, and subgroup analysis showed that some patients could benefit from surgery, whilst patients' preference can be the decisive factor in choosing a management modality. Fractures with significant lateral wall displacement predisposing to impingements often require surgery, and management has to be individualized and tailored to the patient. Surgery does not usually achieve excellent results, though it exposes the patient to potential risks and complications. Wound healing problems and infections affect around 20% of patients when the extensile lateral approach has been used. Sinus tarsi approach and minimally invasive surgery may be viable alternatives, offering similar results with fewer wound complications, but most of the available studies are of low to moderate quality. Late subtalar joint arthrodesis is often required: however, such procedure would be less technically difficult and could result in better foot function should the shape of the calcaneus have been anatomically restored with surgery in the acute phase.

Results of more than 11,000 scans with weightbearing CT - Impact on costs, radiation exposure, and procedure time

BACKGROUND

Weightbearing CT (WBCT) has been proven to more precisely measure bone position than conventional weightbearing radiographic series (R) and conventional CT (CT). The purpose of this study was to assess the benefit of using WBCT instead of R and/or CT as the standard imaging modality, evaluating image acquisition time, radiation dose, and cost-effectiveness.

METHODS

All patients who obtained a WBCT as part of standard of care from July 1, 2013 until March 15, 2019 were included in the study. Image acquisition time (T), radiation dose (RD) per patient, and cost-effectiveness were analyzed and compared between the time period using WBCT (yearly average) and the parameters from 2012, i.e. before the availability of WBCT (RCT group).

RESULTS

11,009 WBCT scans were obtained from 4987 patients (4,987 scans (45%) before treatment; 6,022 scans (55%) at follow-up). On a yearly average, 1,957 WBCTs (bilateral scans) and an additional 10.6 CTs (bilateral feet and ankles) were obtained (WBCT group). In 2012, 1,850 Rs (bilateral feet, dorsoplantar and lateral, metatarsal head skyline view) and 254 CTs were obtained from 885 patients (RCT group). The mean yearly RD was 4.3/4.8uSv for the WBCT/RCT groups (mean difference of .5uSv; a decrease of 10% for the WBCT group; p<.01). Yearly mean T was 114/493h in total (3.3/16.0min per patient) for WBCT/RCT groups (mean difference of 379h; a 77% decrease for the WBCT group; p<.01). Yearly cost-effectiveness was a mean profit of 43,959/-723 Euros for WBCT/RCT groups.

CONCLUSIONS

11,009 WBCT scans from 4,987 patients over a period of 5.6 years at a foot and ankle department resulted in 10% decreased RD, 77% decreased T, and increased financial profit (51 Euros per patient) for the institution.