Part I: recent developments in nanoelectrodes for biological measurements

Review-Recent Advances in Nanosensors Built with Pre-Pulled Glass Nanopipettes and Their Applications in Chemical and Biological Sensing

Nanosensors built with pre-pulled glass nanopipettes, including bare or chemically modified nanopipettes and fully or partially filled solid nanoelectrodes, have found applications in chemical and biological sensing via resistive-pulse, current rectification, and electrochemical sensing. These nanosensors are easily fabricated and provide advantages through their needle-like geometry with nanometer-sized tips, making them highly sensitive and suitable for local measurements in extremely small samples. The variety in the geometry and layout have extended sensing capabilities. In this review, we will outline the fundamentals in fabrication, modification, and characterization of those pre-pulled glass nanopipette based nanosensors and highlight the most recent progress in their development and applications in real-time monitoring of biological processes, chemical ion sensing, and single entity analysis.

Electrochemical determination of arsenic in natural waters using carbon fiber ultra-microelectrodes modified with gold nanoparticles

We have developed an anodic stripping voltammetry method that employs carbon fiber ultra-microelectrodes modified with gold nanoparticles to determine arsenic in natural waters. Gold nanoparticles were potentiostatically deposited on carbon fiber ultra-microelectrodes at -0.90V (vs SCE) for a time of 15s, to form the carbon fiber ultra-microelectrodes modified with gold nanoparticles. Cyclic voltammetry, electrochemical impedance spectroscopy and scanning electron microscopy coupled to an X-ray microanalysis system were used to check and confirm the presence of gold nanoparticles on the carbon fiber ultra-microelectrodes. Arsenic detection parameters such as deposition potential and deposition time were optimized allowing a detection range between 5 to 60µgL^-1. The developed modified electrodes allowed rapid As determination with improved analytical characteristics including better repeatability, higher selectivity, lower detection limit (0.9μgL^-1) and higher sensitivity (0.0176nAμgL^-1) as compared to the standard carbon electrodes. The analytical capability of the optimized method was demonstrated by determination of arsenic in certified reference materials (trace elements in water (NIST SRM 1643d)) and by comparison of results with those obtained by hydride generation atomic absorption spectrometry (HG-AAS) in the determination of the analyte in tap and well waters.

Functional nanostructures for enzyme based biosensors: properties, fabrication and applications

A review describing functional nanostructures for portable and printable enzyme biosensors. Specific physicochemical and surface properties of nanoparticles used as carriers and sensing components and their assembly are discussed with an overview of current and emerging techniques enabling large scale roll-to-roll fabrication and miniaturization. Their integration in flexible, wearable and inexpensive point-of-use devices, and implementation challenges are also provided with examples of applications.

Carbon-nanotube-modified electrodes for highly efficient acute neural recording

Microelectrodes are widely used for monitoring neural activities in various neurobiological studies. The size of the neural electrode is an important factor in determining the signal-to-noise ratio (SNR) of recorded neural signals and, thereby, the recording sensitivity. Here, it is demonstrated that commercial tungsten microelectrodes can be modified with carbon nanotubes (CNTs), resulting in a highly sensitive recording ability. The impedance with the respect to surface area of the CNT-modified electrodes (CNEs) is much less than that of tungsten microelectrodes because of their large electrochemical surface area (ESA). In addition, the noise level of neural signals recorded by CNEs is significantly less. Thus, the SNR is greater than that obtained using tungsten microelectrodes. Importantly, when applied in a mouse brain in vivo, the CNEs can detect action potentials five times more efficiently than tungsten microelectrodes. This technique provides a significant advance in the recording of neural signals, especially in brain regions with sparse neuronal densities.

Nanoelectrodes for biological measurements

Nanoelectrodes are electrodes with a critical dimension in the range of one to hundreds of nanometers and include individual electrodes, nanoelectrode ensembles, and arrays. Metallic nanowires, carbon nanotubes, magnetic nanoparticles, and metal oxide nanowires have been employed to fabricate nanoelectrodes and platforms. In this review, applications of single electrodes, nanoelectrode arrays, and ensembles are briefly evaluated, with emphasis on biological analysis. Nanoelectrodes offer great advantages in numerous areas of biological investigations, particularly in single cells studies, fabrication of microchips, design of coordinated biosensors, and in addressable patterned electrodes. Consequently, nanoelectrodes have immense potential in the development of efficient, specific, sensitive, and intelligent sensors. In conjunction with the rapidly evolving, cost-effective fabrication and materials development approaches, these sensors can be used as direct, point-of-care clinical devices, enabling more personalized medical care. The development and application of nanodevices in biology and medicine will have enormous implications for society and human health.