Green synthesis of silica nanoparticles from olive residue and investigation of their anticancer potential

Synthesis of ordered mesoporous silica from biomass ash and its application in CO2 adsorption

It is possible to achieve high-value utilization of solid wastes and lower the cost of mesoporous silica synthesis by synthesizing mesoporous silica from solid wastes. In this study, silica was extracted using the alkali fusion method using biomass ash as the starting material. Biomass ash based mesoporous silica was successfully prepared by hydrothermal method with silicon extract solution as silicon source. The optimum conditions for preparation were determined as follows: addition of cetyltrimethylammonium bromide was 0.45g, hydrothermal temperature was 120 °C, hydrothermal time was 24h. The prepared mesoporous silicon was systematically characterized, and the results showed that high surface area (495 m²/g) and ordered pore structure appeared in the synthesized mesoporous silica materials. The synthesized mesoporous silica showed excellent CO₂ adsorption performance (0.749 mmol/g) at 25 °C and 1 bar. According to the calculation of adsorption isotherm and thermodynamics, non-linear Freundlich model can fit the adsorption isotherm better and the adsorption heat of mesoporous silica is less than 20 kJ/mol, which belongs to physical adsorption. After five cycles of CO₂ adsorption, the adsorption property was still above 90%, and the CO₂/N₂ adsorption selectivity reached 396.6, showing good regeneration performance and adsorption selectivity. This research can provide a new possibility for the high-value exploitation of biomass ash and reducing the cost of synthetic mesoporous silica.

Recent Advances in the Investigation of Poly(lactic acid) (PLA) Nanocomposites: Incorporation of Various Nanofillers and their Properties and Applications

Poly(lactic acid) (PLA) is considered the most promising biobased substitute for fossil-derived polymers due to its compostability, biocompatibility, renewability, and good thermomechanical properties. However, PLA suffers from several shortcomings, such as low heat distortion temperature, thermal resistance, and rate of crystallization, whereas some other specific properties, i.e., flame retardancy, anti-UV, antibacterial or barrier properties, antistatic to conductive electrical characteristics, etc., are required by different end-use sectors. The addition of different nanofillers represents an attractive way to develop and enhance the properties of neat PLA. Numerous nanofillers with different architectures and properties have been investigated, with satisfactory achievements, in the design of PLA nanocomposites. This review paper overviews the current advances in the synthetic routes of PLA nanocomposites, the imparted properties of each nano-additive, as well as the numerous applications of PLA nanocomposites in various industrial fields.

Rice husk waste into various template-engineered mesoporous silica materials for different applications: A comprehensive review on recent developments

Following the discovery of Stöber silica, the realm of morphology-controlled mesoporous silica nanomaterials like MCM-41, SBA-15, and KCC-1 has been expanded. Due to their high BET surface area, tunable pores, easiness of functionalization, and excellent thermal and chemical stability, these materials take part a vital role in the advancement of techniques and technologies for tackling the world's largest challenges in the area of water and the environment, energy storage, and biotechnology. Synthesizing these materials with excellent physicochemical properties from cost-efficient biomass wastes is a foremost model of sustainability. Particularly, SiO₂ with a purity >98% can be obtained from rice husk (RH), one of the most abundant biomass wastes, and can be template engineered into various forms of mesoporous silica materials in an economic and eco-friendly way. Hence, this review initially gives insight into why to valorize RH into value-added silica materials. Then the thermal, chemical, hydrothermal, and biological methods of high-quality silica extraction from RH and the principles of synthesis of mesoporous and fibrous mesoporous silica materials like SBA-15, MCM-41, MSNs, and KCC-1 are comprehensively discussed. The potential applications of rice husk-derived mesoporous silica materials in catalysis, drug delivery, energy, adsorption, and environmental remediation are explored. Finally, the conclusion and the future outlook are briefly highlighted.

The Effect of Non-Uniform Magnetic Field on the Efficiency of Mixing in Droplet-Based Microfluidics: A Numerical Investigation

Achieving high efficiency and throughput in droplet-based mixing over a small characteristic length, such as microfluidic channels, is one of the crucial parameters in Lab-on-a-Chip (LOC) applications. One solution to achieve efficient mixing is to use active mixers in which an external power source is utilized to mix two fluids. One of these active methods is magnetic micromixers using ferrofluid. In this technique, magnetic nanoparticles are used to make one phase responsive to magnetic force, and then by applying a magnetic field, two fluid phases, one of which is magneto-responsive, will sufficiently mix. In this study, we investigated the effect of the magnetic field's characteristics on the efficiency of the mixing process inside droplets. When different concentrations of ferrofluids are affected by a constant magnetic field, there is no significant change in mixing efficiency. As the magnetic field intensifies, the magnetic force makes the circulation flow inside the droplet asymmetric, leading to chaotic advection, which creates a flow that increases the mixing efficiency. The results show that the use of magnetic fields is an effective method to enhance the mixing efficiency within droplets, and the efficiency of mixing increases from 65.4 to 86.1% by increasing the magnetic field intensity from 0 to 90 mT. Besides that, the effect of ferrofluid's concentration on the mixing efficiency is studied. It is shown that when the concentration of the ferrofluid changes from 0 to 0.6 mol/m³, the mixing efficiency increases considerably. It is also shown that by changing the intensity of the magnetic field, the mixing efficiency increases by about 11%.

Green synthesis of SiO2 nanoparticles from Rhus coriaria L. extract: Comparison with chemically synthesized SiO2 nanoparticles

The usage of the green synthesis method to produce nanoparticles (NPs) has received great acceptance among the scientific community in recent years. This, perhaps, is owing to its eco-friendliness and the utilization of non-toxic materials during the synthesizing process. The green synthesis approach also supplies a reducing and a capping agent, which increases the stability of the NPs through the available phytochemicals in the plant extractions. The present study describes a green synthesis method to produce nano-silica (SiO₂) NPs utilizing Rhus coriaria L. extract and sodium metasilicate (Na₂SiO₃.5H₂O) under reflux conditions. Sodium hydroxide (NaOH) is added to the mixture to control the pH of the solution. Then, the obtained NPs have been compared with the chemically synthesized SiO₂ NPs. The structure, thermal, and morphological properties of the SiO₂ NPs, both green synthesized and chemically synthesized, were characterized using Fourier-transform infrared spectroscopy (FTIR), Ultraviolet-Visible Spectroscopy (UV-Vis), X-ray diffraction (XRD), and Field Emission Scanning Electron Microscopy (FESEM). Also, the elemental compassion distribution was studied by energy-dispersive X-ray spectroscopy (EDX). In addition, the zeta potential, dynamic light scatter (DLS), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) was used to study the stability, thermal properties, and surface area of the SiO₂ NPs. The overall results revealed that the green synthesis of SiO₂ NPs outperforms chemically synthesized SiO₂ NPs. This is expected since the green synthesis method provides higher stability, enhanced thermal properties, and a high surface area through the available phytochemicals in the Rhus coriaria L. extract.

Biosynthesis of Silica Nanoparticles Using the Leaf Extract of Punica granatum and Assessment of Its Antibacterial Activities Against Human Pathogens

Plant-mediated nanoparticle synthesis is a revolutionary technique with numerous applications in fields, such as agriculture, food processing, and medicine. This study reports that Punica granatum leaf extract is capable of the green and eco-friendly synthesis of silica nanoparticles that provides a simple, cost-effective, and efficient methodology. P. granatum leaf extract was employed as a capping and stabilizing agent for the formation of silica nanoparticles, which were synthesized by a biological method using tetra ethyl ortho silicate. Biosynthesized silica nanoparticles are characterized by X-ray diffraction analysis, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Fourier transform infrared spectroscopy. All the analyses and characterization determined that the particles were spherical in shape and amorphous in nature with an average size of 12 nm. P. granatum-assisted silica nanoparticles were tested for antibacterial activity by a well-diffusion method against two-gram negative bacterial pathogens (E. coli and Salmonella sp.). The antibacterial studies prove that P. granatum-assisted silica nanoparticles have good antibacterial properties. These studies will help us find a new nano-drug or medicine against multidrug-resistant bacteria.

Viola betonicifolia-Mediated Biosynthesis of Silver Nanoparticles for Improved Biomedical Applications

We report the biosynthesis of silver (Ag) nanoparticles (NAPs) (LEVB-Ag NAPs) by an environmentally friendly green synthesis approach using the phytoconstituents of Viola betonicifolia leaf extract. The spectroscopic techniques were employed to characterize biosynthesized LEVB-Ag NAPs successfully. Biosynthesized LEVB-Ag NAPs were assessed for antibacterial and antimycotic activities against bacterium and mycological strains (H. pylori, S. epidermidis, C. tropicalis, and T. rubrum) using the serial dilution method. They were also evaluated for their biofilm inhibiting potential against both bacterial and fungi species. They were further assessed for the cytobiocompatible potential with two normal cell lines (293T and hMSC). The results demonstrate that the biosynthesized LEVB-Ag NAPs showed superior log₁₀ reduction in bacterial and fungal growth and presented more than 99.50% killing efficiency. Moreover, biosynthesized LEVB-Ag NAPs excellently inhibited the biofilm formation of bacterial (Gram-positive and Gram-negative) and mycological strains and presented more than 80% biofilm inhibiting percentage compared to both plant extract and CHE-Ag NAPs. They further presented good cytobiocompatibility in vitro with 293T and hMSC cells compared to CHE-Ag NAPs. Biosynthesized LEVB-Ag NAPs presented superior antibacterial, antimycotic, biofilm inhibition, and cytobiocompatible results that might be attributed to the synergistic effect of the NAPs’ physiochemical properties and the immobilized phytoconstituents from plant leaf extract on their surface. Hence, biosynthesized LEVB-Ag NAPs may be a promising contender for a variety of therapeutic applications.

Tubular TPU/SF nanofibers covered with chitosan-based hydrogels as small-diameter vascular grafts with enhanced mechanical properties

Native grafts such as internal mammary artery and saphenous vein are the main choice for coronary artery bypass graft. However, due to the limitations associated with their availability and rapid failure caused by hyperplasia, small diameter tissue-engineered vascular grafts (TEVGs) with sufficient post-implantation patency are urgently demanded as artificial alternatives. In our previous work, we innovatively fabricated a bilayer vascular graft providing appropriate structural and biological properties using electrospinning and freeze-drying methods. It was proved that the mechanical properties of the proposed graft enhanced in comparison with using either of methods individually. Here, we adopted the same methods and incorporated an anticoagulant internal layer (inner diameter 4 mm), comprised of co-electrospun fibers of silk fibroin (SF) and heparinized thermoplastic polyurethane (TPU), and an external highly porous hydrogel fabricated by freeze-drying method. The electrospun layer exhibited strong mechanical properties including superior elastic modulus (4.92 ± 0.11 MPa), suture retention force (6.73 ± 0.83 N), elongation at break (196 ± 4%), and comparable burst pressure (1140 ± 12 mmHg) while the external hydrogel provided SMCs viability. The heparin was released in a sustain manner over 40 days, and the cytocompatibility and blood compatibility of scaffold were approved using MTT assay and platelet adhesion test. Thus, the proposed graft has a potential to be used as an artificial blood vessel scaffold for later in-vivo transplantation.

Skin interaction, permeation, and toxicity of silica nanoparticles: Challenges and recent therapeutic and cosmetic advances

Silica nanoparticles (SNPs) received more attention with the emergence of nanotechnology with the aim and promise of becoming innovative drug delivery systems. They have been fulfilling this objective with excellence and nowadays they play a central role in biomedical applications. New SNPs application routes are being explored such as the epidermal, dermal, and transdermal routes. With that, novel models of synthesis, functionalization, and applications constantly appear. However, it is essential that such innovations are accompanied by in-depth studies on permeation, biodistribution, metabolization, and elimination of the generated by-products. Such studies are still incipient, if not rare. This article reviews significant findings on SNPs and their skin interactions. An extensive literature review on SNPs synthesis and functionalization methodologies was performed, as well as on the skin characteristics, skin permeation mechanisms, and in vivo toxicity assessments. Furthermore, studies of the past 5 years on the main therapeutic and cosmetic products employing SNPs, with greater emphasis on in vivo and ex vivo studies were included.

Green Synthesis of Silver Nanoparticles Using Olea europaea Leaf Extract for Their Enhanced Antibacterial, Antioxidant, Cytotoxic and Biocompatibility Applications

Herein, we report the green synthesis of silver nanoparticles (OE-Ag NPs) by ecofriendly green processes using biological molecules of Olea europaea leaf extract. Green synthesized OE-Ag NPs were successfully characterized using different spectroscopic techniques. Antibacterial activity of OE-Ag NPs was assessed against four different bacteriological strains using the dilution serial method. The cytotoxic potential was determined against MCF-7 carcinoma cells using MTT assay in terms of cell viability percentage. Antioxidant properties were evaluated in terms of 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging. Biocompatibility was further examined by incubating the synthesized NPs with hMSC cells for 24 h. The results were demonstrated that synthesized OE-Ag NPs presented excellent log10 reduction in the growth of all the tested bacterial strains, which as statistically equivalent (p > 0.05) to the standard antibiotic drug. Moreover, they also demonstrated excellent cytotoxic efficacy against the MCF-7 carcinoma cells compared to plant lead extract and Com-Ag NPs. Green synthesized OE-Ag NPs appeared more biocompatible to hMSC and 293T cells compared to Com-Ag NPs. Excellent biological results of the OE-Ag NPs might be attributed to the synergetic effect of NPs' properties and the adsorbed secondary metabolites of plant leaf extract. Hence, this study suggests that synthesized OE-Ag NPs can be a potential contender for their various biological and nutraceutical applications. Moreover, this study will open a new avenue to produce biocompatible nanoparticles with additional biological functionalities from the plants.