Improved neural differentiation of human mesenchymal stem cells interfaced with carbon nanotube scaffolds

Extrapolating neurogenesis of mesenchymal stem/stromal cells on electroactive and electroconductive scaffolds to dental and oral-derived stem cells

The high neurogenic potential of dental and oral-derived stem cells due to their embryonic neural crest origin, coupled with their ready accessibility and easy isolation from clinical waste, make these ideal cell sources for neuroregeneration therapy. Nevertheless, these cells also have high propensity to differentiate into the osteo-odontogenic lineage. One strategy to enhance neurogenesis of these cells may be to recapitulate the natural physiological electrical microenvironment of neural tissues via electroactive or electroconductive tissue engineering scaffolds. Nevertheless, to date, there had been hardly any such studies on these cells. Most relevant scientific information comes from neurogenesis of other mesenchymal stem/stromal cell lineages (particularly bone marrow and adipose tissue) cultured on electroactive and electroconductive scaffolds, which will therefore be the focus of this review. Although there are larger number of similar studies on neural cell lines (i.e. PC12), neural stem/progenitor cells, and pluripotent stem cells, the scientific data from such studies are much less relevant and less translatable to dental and oral-derived stem cells, which are of the mesenchymal lineage. Much extrapolation work is needed to validate that electroactive and electroconductive scaffolds can indeed promote neurogenesis of dental and oral-derived stem cells, which would thus facilitate clinical applications in neuroregeneration therapy.

Carbon Nanomaterials Embedded in Conductive Polymers: A State of the Art

Carbon nanomaterials are at the forefront of the newest technologies of the third millennium, and together with conductive polymers, represent a vast area of indispensable knowledge for developing the devices of tomorrow. This review focusses on the most recent advances in the field of conductive nanotechnology, which combines the properties of carbon nanomaterials with conjugated polymers. Hybrid materials resulting from the embedding of carbon nanotubes, carbon dots and graphene derivatives are taken into consideration and fully explored, with discussion of the most recent literature. An introduction into the three most widely used conductive polymers and a final section about the most recent biological results obtained using carbon nanotube hybrids will complete this overview of these innovative and beyond belief materials.

Injectable silk sericin scaffolds with programmable shape-memory property and neuro-differentiation-promoting activity for individualized brain repair of severe ischemic stroke

Severe ischemic stroke damages neuronal tissue, forming irregular-shaped stroke cavities devoid of supporting structure. Implanting biomaterials to provide structural and functional support is thought to favor ingrowth of regenerated neuronal networks. Injectable hydrogels capable of in situ gelation are often utilized for stroke repair, but challenged by incomplete gelation and imprecise control over end-macrostructure. Injectable shape-memory scaffolds might overcome these limitations, but are not explored for stroke repair. Here, we report an injectable, photoluminescent, carbon-nanotubes-doped sericin scaffold (CNTs-SS) with programmable shape-memory property. By adjusting CNTs' concentrations, CNTs-SS' recovery dynamics can be mathematically calculated at the scale of seconds, and its shapes can be pre-designed to precisely match any irregular-shaped cavities. Using a preclinical stroke model, we show that CNTs-SS with the customized shape is successfully injected into the cavity and recovers its pre-designed shape to well fit the cavity. Notably, CNTs-SS' near-infrared photoluminescence enables non-invasive, real-time tracking after in vivo implantation. Moreover, as a cell carrier, CNTs-SS not only deliver bone marrow mesenchymal stem cells (BMSCs) into brain tissues, but also functionally promote their neuronal differentiation. Together, we for the first time demonstrate the feasibility of applying injectable shape-memory scaffolds for stroke repair, paving the way for personalized stroke repair.

The Advances in Biomedical Applications of Carbon Nanotubes

Unique chemical, physical, and biological features of carbon nanotubes make them an ideal candidate for myriad applications in industry and biomedicine. Carbon nanotubes have excellent electrical and thermal conductivity, high biocompatibility, flexibility, resistance to corrosion, nano-size, and a high surface area, which can be tailored and functionalized on demand. This review discusses the progress and main fields of bio-medical applications of carbon nanotubes based on recently-published reports. It encompasses the synthesis of carbon nanotubes and their application for bio-sensing, cancer treatment, hyperthermia induction, antibacterial therapy, and tissue engineering. Other areas of carbon nanotube applications were out of the scope of this review. Special attention has been paid to the problem of the toxicity of carbon nanotubes.

A Methylome-Wide Association Study of Trajectories of Oppositional Defiant Behaviors and Biological Overlap With Attention Deficit Hyperactivity Disorder

In 671 mother-child (49% male) pairs from an epidemiological birth cohort, we investigated (a) prospective associations between DNA methylation (at birth) and trajectories (ages 7-13) of oppositional defiant disorder (ODD), and the ODD subdimensions of irritable and headstrong; (b) common biological pathways, indexed by DNA methylation, between ODD trajectories and attention deficit hyperactivity disorder (ADHD); (c) genetic influence on DNA methylation; and (d) prenatal risk exposure associations. Methylome-wide significant associations were identified for the ODD and headstrong, but not for irritable. Overlap analysis indicated biological correlates between ODD, headstrong, and ADHD. DNA methylation in ODD and headstrong was (to a degree) genetically influenced. DNA methylation associated with prenatal risk exposures of maternal anxiety (headstrong) and cigarette smoking (ODD and headstrong).

Three-Dimensional Electroconductive Hyaluronic Acid Hydrogels Incorporated with Carbon Nanotubes and Polypyrrole by Catechol-Mediated Dispersion Enhance Neurogenesis of Human Neural Stem Cells

Electrically conductive hyaluronic acid (HA) hydrogels incorporated with single-walled carbon nanotubes (CNTs) and/or polypyrrole (PPy) were developed to promote differentiation of human neural stem/progenitor cells (hNSPCs). The CNT and PPy nanocomposites, which do not easily disperse in aqueous phases, dispersed well and were efficiently incorporated into catechol-functionalized HA (HA-CA) hydrogels by the oxidative catechol chemistry used for hydrogel cross-linking. The prepared electroconductive HA hydrogels provided dynamic, electrically conductive three-dimensional (3D) extracellular matrix environments that were biocompatible with hNSPCs. The HA-CA hydrogels containing CNT and/or PPy significantly promoted neuronal differentiation of human fetal neural stem cells (hfNSCs) and human induced pluripotent stem cell-derived neural progenitor cells (hiPSC-NPCs) with improved electrophysiological functionality when compared to differentiation of these cells in a bare HA-CA hydrogel without electroconductive motifs. Calcium channel expression was upregulated, depolarization was activated, and intracellular calcium influx was increased in hNSPCs that were differentiated in 3D electroconductive HA-CA hydrogels; these data suggest a potential mechanism for stem cell neurogenesis. Overall, our bioinspired, electroconductive HA hydrogels provide a promising cell-culture platform and tissue-engineering scaffold to improve neuronal regeneration.

Biocompatible chitin/carbon nanotubes composite hydrogels as neuronal growth substrates

In the past decades, extensive studies have demonstrated that carbon nanotubes (CNTs) could promote cell adhesion, proliferation and differentiation of neuronal cells. However, the potential cytotoxicity in biological systems severely restricted the utilization of CNTs as substrates for neural growth. In this study, biocompatible chitin/carbon nanotubes (Ch/CNT) composite hydrogels were developed via blending modified CNTs with chitin solution in 11wt% NaOH/4wt% urea aqueous system, and subsequently regenerating in ethanol. As the CNTs were dispersed homogeneously in chitin matrix and combined with chitin nanofibers to form a compact and neat Ch/CNT nanofibrous network through intermolecular interactions, such as electrostatic interactions, hydrogen bonding and amphiphilic interaction, etc. The tensile strength and elongation at break of the Ch/CNT composite hydrogels were obviously enhanced, and the swelling ratio decreased. In addition, the Ch/CNT hydrogels exhibited good hemocompatibility, biodegradation in vitro and biocompatibility without cytotoxicity and neurotoxicity nature to neuronal and Schwann cells (PC12 cells and RSC96 cells). Especially, the Ch/CNT3 composite hydrogels exhibited significant enhancement of the neuronal cell adhesion, proliferation and neurite outgrowth of neuronal cells with a great increase in both the percentage and the length of neurites. Therefore, we provide a simple and efficient approach to construct the novel Ch/CNT hydrogels as neuronal growth substrates for the potential application in nerve regeneration.

Ultrasound-mediated piezoelectric differentiation of neuron-like PC12 cells on PVDF membranes

Electrical and/or electromechanical stimulation has been shown to play a significant role in regenerating various functionalities in soft tissues, such as tendons, muscles, and nerves. In this work, we investigate the piezoelectric polymer polyvinylidene fluoride (PVDF) as a potential substrate for wireless neuronal differentiation. Piezoelectric PVDF enables generation of electrical charges on its surface upon acoustic stimulation, inducing neuritogenesis of PC12 cells. We demonstrate that the effect of pure piezoelectric stimulation on neurite generation in PC12 cells is comparable to the ones induced by neuronal growth factor (NGF). In inhibitor experiments, our results indicate that dynamic stimulation of PVDF by ultrasonic (US) waves activates calcium channels, thus inducing the generation of neurites via a cyclic adenosine monophosphate (cAMP)-dependent pathway. This mechanism is independent from the well-studied NGF induced mitogen-activated protein kinases/extracellular signal-regulated kinases (MAPK/ERK) pathway. The use of US, in combination with piezoelectric polymers, is advantageous since focused power transmission can occur deep into biological tissues, which holds great promise for the development of non-invasive neuroregenerative devices.

Nanoscale hybrid systems based on carbon nanotubes for biological sensing and control

This paper provides a concise review on the recent development of nanoscale hybrid systems based on carbon nanotubes (CNTs) for biological sensing and control. CNT-based hybrid systems have been intensively studied for versatile applications of biological interfaces such as sensing, cell therapy and tissue regeneration. Recent advances in nanobiotechnology not only enable the fabrication of highly sensitive biosensors at nanoscale but also allow the applications in the controls of cell growth and differentiation. This review describes the fabrication methods of such CNT-based hybrid systems and their applications in biosensing and cell controls.

Guiding osteogenesis of mesenchymal stem cells using carbon-based nanomaterials

In the field of regenerative medicine, stem cells are highly promising due to their innate ability to generate multiple types of cells that could replace/repair damaged parts of human organs and tissues. It has been reported that both in vitro and in vivo function/survival of stem cells could significantly be improved by utilizing functional materials such as biodegradable polymers, metal composites, nanopatterns and nanohybrid particles. Of various biocompatible materials available for use in stem cell-based therapy and research, carbon-based materials-including fullerenes graphene/graphene oxide and carbon nanotubes-have been found to possess unique physicochemical characteristics that contribute to the effective guidance of stem cell differentiation into specific lineages. In this review, we discuss a number of previous reports that investigated the use of carbon-based materials to control stem cell behavior, with a particular focus on their immense potential to guide the osteogenesis of mesenchymal stem cells (MSCs). We hope that this review will provide information on the full potential of using various carbon-based materials in stem cell-mediated regenerative therapy, particularly for bone regeneration and repair.

Neuron-like differentiation of mesenchymal stem cells on silicon nanowires

The behavior of mammalian cells on vertical nanowire (NW) arrays, including cell spreading and the dynamic distribution of focal adhesions and cytoskeletal proteins, has been intensively studied to extend the implications for cellular manipulations in vitro. Prompted by the result that cells on silicon (Si) NWs showed morphological changes and reduced migration rates, we have explored the transition of mesenchymal stem cells into a neuronal lineage by using SiNWs with varying lengths. When human mesenchymal stem cells (hMSCs) were cultured on the longest SiNWs for 3 days, most of the cells exhibited elongated shapes with neurite-like extensions and dot-like focal adhesions that were prominently observed along with actin filaments. Under these circumstances, the cell motility analyzed by live cell imaging was found to decrease due to the presence of SiNWs. In addition, the slowed growth rate, as well as the reduced population of S phase cells, suggested that the cell cycle was likely arrested in response to the differentiation process. Furthermore, we measured the mRNA levels of several lineage-specific markers to confirm that the SiNWs actually induced neuron-like differentiation of the hMSCs while hampering their osteogenic differentiation. Taken together, our results implied that SiNWs were capable of inducing active reorganization of cellular behaviors, collectively guiding the fate of hMSCs into the neural lineage even in the absence of any inducing reagent.

Three-dimensional printing of nanomaterial scaffolds for complex tissue regeneration

Three-dimensional (3D) printing has recently expanded in popularity, and become the cutting edge of tissue engineering research. A growing emphasis from clinicians on patient-specific care, coupled with an increasing knowledge of cellular and biomaterial interaction, has led researchers to explore new methods that enable the greatest possible control over the arrangement of cells and bioactive nanomaterials in defined scaffold geometries. In this light, the cutting edge technology of 3D printing also enables researchers to more effectively compose multi-material and cell-laden scaffolds with less effort. In this review, we explore the current state of 3D printing with a focus on printing of nanomaterials and their effect on various complex tissue regeneration applications.

Material and mechanical factors: new strategy in cellular neurogenesis

Since damaged neural circuits are not generally self-recovered, developing methods to stimulate neurogenesis is critically required. Most studies have examined the effects of soluble pharmacological factors on the cellular neurogenesis. On the other hand, it is now recognized that the other extracellular factors, including material and mechanical cues, also have a strong potential to induce cellular neurogenesis. This article will review recent data on the material (chemical patterning, micro/nano-topography, carbon nanotube, graphene) and mechanical (static cue from substrate stiffness, dynamic cue from stretch and flow shear) stimulations of cellular neurogenesis. These approaches may provide new neural regenerative medicine protocols. Scaffolding material templates capable of triggering cellular neurogenesis can be explored in the presence of neurogenesis-stimulatory mechanical environments, and also with conventional soluble factors, to enhance axonal growth and neural network formation in neural tissue engineering.

When neurons encounter nanoobjects: spotlight on calcium signalling

Nanosized objects are increasingly present in everyday life and in specialized technological applications. In recent years, as a consequence of concern about their potential adverse effects, intense research effort has led to a better understanding of the physicochemical properties that underlie their biocompatibility or potential toxicity, setting the basis for a rational approach to their use in the different fields of application. Among the functional parameters that can be perturbed by interaction between nanoparticles (NPs) and living structures, calcium homeostasis is one of the key players and has been actively investigated. One of the most relevant biological targets is represented by the nervous system (NS), since it has been shown that these objects can access the NS through several pathways; moreover, engineered nanoparticles are increasingly developed to be used for imaging and drug delivery in the NS. In neurons, calcium homeostasis is tightly regulated through a complex set of mechanisms controlling both calcium increases and recovery to the basal levels, and even minor perturbations can have severe consequences on neuronal viability and function, such as excitability and synaptic transmission. In this review, we will focus on the available knowledge about the effects of NPs on the mechanisms controlling calcium signalling and homeostasis in neurons. We have taken into account the data related to environmental NPs, and, in more detail, studies employing engineered NPs, since their more strictly controlled chemical and physical properties allow a better understanding of the relevant parameters that determine the biological responses they elicit. The literature on this specific subject is all quite recent, and we have based the review on the data present in papers dealing strictly with nanoparticles and calcium signals in neuronal cells; while they presently amount to about 20 papers, and no related review is available, the field is rapidly growing and some relevant information is already available. A few general findings can be summarized: most NPs interfere with neuronal calcium homeostasis by interactions at the plasmamembrane, and not following their internalization; influx from the extracellular medium is the main mechanism involved; the effects are dependent in a complex way from concentration, size and surface properties.

Facile oxidation of superaligned carbon nanotube films for primary cell culture and genetic engineering

A material that can simultaneously support mammalian cell growth and preserve their physiological function is highly desirable in biomedical research. To meet this need, we fabricated superaligned carbon nanotube (SACNT) thin films and modified their surface using a convenient oxidization method. Our analysis demonstrated that the physical properties of oxidized SACNT films became more biocompatible. It supported the attachment and growth of primary mouse fibroblast cells as well as neonatal rat cardiomyocytes. Moreover, when cultured on oxidized SACNT films, neonatal rat cardiomyocytes spread normally and displayed calcium influx. Finally, we showed that, as oxidized SACNT films retained their electrical conductivity, attached cells can be electrotransfected in situ on them. Strong and prolonged expression of green fluorescence proteins (GFPs) or red fluorescence proteins (RFPs) was observed upon cell electroporation on oxidized SACNT films. In summary, our results provide evidence that simple oxidation greatly improved the biocompatibility of carbon nanotube films, which becomes more suitable for future applications in cell and genetic engineering.

Concise review: carbon nanotechnology: perspectives in stem cell research

Carbon nanotechnology has developed rapidly during the last decade, and carbon allotropes, especially graphene and carbon nanotubes, have already found a wide variety of applications in industry, high-tech fields, biomedicine, and basic science. Electroconductive nanomaterials have attracted great attention from tissue engineers in the design of remotely controlled cell-substrate interfaces. Carbon nanoconstructs are also under extensive investigation by clinical scientists as potential agents in anticancer therapies. Despite the recent progress in human pluripotent stem cell research, only a few attempts to use carbon nanotechnology in the stem cell field have been reported. However, acquired experience with and knowledge of carbon nanomaterials may be efficiently used in the development of future personalized medicine and in tissue engineering.