Comparison of Enamel Surface Integrity after De-Bracketing as Affected by Seven Different Orthodontic Residual Cement Removal Systems

This study used seven different adhesive removal systems to evaluate and compare enamel surface integrity, heat generation, and time consumed during residual cement removal after de-bracketing. The sample size was 140 human premolars. Teeth were cleaned, mounted, and prepared for orthodontic bracket bonding. Brackets were then debonded using bracket-removing pliers. Teeth were randomly assigned to seven groups based on the residual cement removal system: Group 1: Stainbuster bur, Group 2: Renew diamond bur #129, Group 3: Renew carbide bur, Group 4: OneGloss Complete system, Group 5: Sof-Lex system, Group 6: Enhance Finishing and PoGo Polishing complete kit, and Group 7: Renew friction grip points. The enamel surface was evaluated for roughness before bracketing and after residual cement removal using surface profilometry. The time taken for cement removal was recorded using a digital timer, and heat generation was measured using a laser thermometer before and after cement removal. One-way ANOVA compared the pre- and post-values for enamel surface roughness, temperature, and time consumed. When comparing the difference between the post- and pre-finishing roughness using one-way ANOVA, the Renew diamond bur produced the roughest enamel surface post-removal with a mean of 4.716 μm, while the Sof-Lex recorded the lowest at 0.760 μm. The highest mean temperature was recorded with the Stainbuster bur at 5.545 °C, and the lowest temperature was recorded with the Enhance bur at 2.260 °C. The time for cement removal was the shortest with the Enhance bur at 12.2 s, whereas the time was the longest with the Renew diamond bur at 30.4 s. In conclusion, all the residual cement removal systems used in this clinically simulated study were not able to restore the original enamel surface smoothness. However, the 3M Sof-Lex produced the lowest enamel roughness but with more time consumption and heat generation. When selecting the best residual cement removal system to be used, clinicians should weigh the merits and demerits of each system based on the clinical judgement of the operator.

White Spot Lesions (WSLs)-Post-Orthodontic Occurrence, Management and Treatment Alternatives: A Narrative Review

Although treatment with fixed or mobile appliances has become an important part of modern orthodontics, side effects such as white spot lesions (WSLs) have a negative impact on the aesthetic outcome of orthodontic treatment. The purpose of this article was to review current evidence on the diagnosis, risk assessment, prevention, management and post-orthodontic treatment of these lesions. Data collection was performed electronically, and the initial search using the keywords "white spot lesions", "orthodontics", "WSL", "enamel" and "demineralization" in different combinations resulted in 1032 articles for the two electronic databases used. Ultimately, a total of 47 manuscripts were considered relevant to the aim of this research and included in this review. The results of the review indicate that WSLs remain a significant problem during orthodontic treatment. According to studies in the literature, the severity of WSLs correlates to the duration of treatment. Using toothpaste with more than 1000 ppm fluoride at home reduces the frequency of WSL separation and regular application of varnishes in the office reduces the frequency of the occurrence of WSLs only in the context of maintaining a strict hygiene regime. The old hypothesis that elastomeric ligatures retain more dental plaque than metal ones has been refuted. There are no differences in the appearance of WSLs between conventional brackets and self-ligating brackets. Clear aligner mobile devices develop fewer WSLs but are more extensive as opposed to conventional fixed devices, while lingual orthodontic appliances have a lower incidence of WSLs, and the most effective device for preventing these lesions is WIN, followed by Incognito.

Validation of clinical photography and a laser fluorescence device for assessment of enamel demineralization during multi-bracketed fixed orthodontic treatment

AIM

To compare the validity of DIAGNOdent pen™ 2190 and clinical photographs in the diagnosis (presence or absence) and assessment of white spot lesions (WSLs) during multi-bracketed fixed orthodontic treatment.

METHODS

A total of 1607 readings from 99 patients were obtained using DIAGNOdent pen™ 2190, clinical photographs, and visual assessment criteria to assess WSLs at 6 -, 12- and 18 months after bonding of brackets. Receiver operating characteristic curves were constructed, and areas under the curve (AUC) were calculated to assess the presence or absence of WSLs and distinguish the severity of WSLs as slight or severe. Sensitivities, specificities, and AUC were calculated for outcomes at an alpha of 0.05 and 95% confidence intervals (CIs).

RESULTS

The values of sensitivity and specificity of DIAGNOdent pen™ 2190 were found to be 0.78 and 0.83, respectively, to distinguish presence/absence of WSLs with good accuracy (AUC= 0.855; 95% CI: 0.820-0.889) and for digital photographs, accuracy was excellent (AUC= 0.973, 95% CI: 0.956-0.991) with sensitivity and specificity of 0.96 and 0.99, respectively. However, the accuracy of DIAGNOdent pen™ 2190 was poor (AUC= 0.543, 95% CI: 0.418-0.668) in delineating slight and severe WSLs with a sensitivity of 0.31 and specificity of 0.83; while the values of sensitivity and specificity for distinguishing slight or severe lesions for clinical photographs were 0.96 and 0.99, respectively with excellent accuracy (AUC=0.978, 95% CI: 0.936-1.000).

CONCLUSIONS

Clinical photographs had better validity than DIAGNOdent pen™ 2190 in diagnosis and assessment of severity of demineralized lesions during multi-bracketed fixed orthodontic treatment.

Physical/Mechanical and Antibacterial Properties of Orthodontic Adhesives Containing Calcium Phosphate and Nisin

Enamel demineralization around orthodontic adhesive is a common esthetic concern during orthodontic treatment. The aim of this study was to prepare orthodontic adhesives containing monocalcium phosphate monohydrate (MCPM) and nisin to enable mineralizing and antibacterial actions. The physicomechanical properties and the inhibition of S. mutans growth of the adhesives with added MCPM (5, 10 wt %) and nisin (5, 10 wt %) were examined. Transbond XT (Trans) was used as the commercial comparison. The adhesive containing a low level of MCPM showed significantly higher monomer conversion (42–62%) than Trans (38%) (p < 0.05). Materials with additives showed lower monomer conversion (p < 0.05), biaxial flexural strength (p < 0.05), and shear bond strength to enamel than those of a control. Additives increased water sorption and solubility of the experimental materials. The addition of MCPM encouraged Ca and P ion release, and the precipitation of calcium phosphate at the bonding interface. The growth of S. mutans in all the groups was comparable (p > 0.05). In conclusion, experimental orthodontic adhesives with additives showed comparable conversion but lesser mechanical properties than the commercial material. The materials showed no antibacterial action, but exhibited ion release and calcium phosphate precipitation. These properties may promote remineralization of the demineralized enamel.

A comparison of resin infiltration and microabrasion for postorthodontic white spot lesion

INTRODUCTION

The objective of this research was to evaluate and compare the effectiveness of microabrasion and resin infiltration for white spot lesions (WSLs).

METHODS

Patients with postorthodontic WSLs were enrolled and randomly assigned to the control, microabrasion, and resin-infiltration groups. Intraoral photographs were taken before and after (6 months later) treatment. WSL sizes were determined through ImageJ (Wayne Rasband, Kensington, Md). Integrated optical density (IOD) was determined for a WSL and its surrounding normal enamel through Image-Pro Plus (version 6.0; Media Cybernetics, Rockville, Md), and their differences of IOD were considered as the IOD surrogate for that WSL. The color change of WSL were measured through ΔE.

RESULTS

A total of 27 eligible patients were enrolled; 9 subjects were assigned to each group, resulting in 56 teeth in the control group, 72 in the microabrasion group, and 58 in the resin-infiltration group. The ratios of WSL size (after/before) were similar between the microabrasion and resin-infiltration group (43.94 ± 0.03% vs 45.02 ± 0.03%; P = 0.96 > 0.05), but those of the 2 groups were significantly lower than those of the control group (92.15 ± 0.02%) (P <0.001). Moreover, the ratios of IOD (after/before) were significantly lower in the resin-infiltration group (22.94 ± 0.02%) than in the microabrasion (78.11 ± 0.03%) and control (83.79 ± 0.02%) (P <0.001) groups. The highest ΔE improvement was obtained by infiltration, but there was no significant difference between microabrasion and control group.

CONCLUSIONS

Resin infiltration and microabrasion are comparably effective in reducing the sizes of WSL, but resin infiltration enjoys an esthetic advantage over microabrasion.

Antibacterial and white spot lesions preventive effect of an orthodontic resin modified with silver-nanoparticles

Background

To evaluate the antibacterial property of a modified orthodontic resin with different concentrations of silver-nanoparticles (AgNPs), and quantify its preventive effect on the formation of white spot lesions (WSLs).

Material and Methods

An orthodontic resin (Transbond XT) was modified with four concentrations of AgNPs (1%, 0.5%, 0.1%, and 0.05%), the orthodontic resin without AgNPs was used as control. Polymerized resin discs (n=80) were submitted to Agar diffusion test on Petri dishes inoculated with Streptococcus mutans and Lactobacillus acidophilus. In addition, resin discs of each group (n=40) were placed in 96-well plates with bacterial suspensions to evaluate the colony-forming-units (CFU). For the WSLs prevention test, brackets were bonded with the experimental orthodontic resins on 45 premolars (n=5), and were subjected to a microbiological caries induction method for 9 days. Photographs were taken before and after the test, and the images were evaluated with the Image J software to calculate the area of WSLs. The data were analyzed using ANOVA and Tukey-HSD test, Student´s t-test and Kruskal-Wallis test (α=0.05).

Results

The 0.5% and 1% AgNPs modified resin inhibit the growth of S. mutans and L. acidophilus. All the modified resins showed significantly less CFU, when compared to the control (p<0.05). 1% AgNPs resin promote the higher prevention of WSLs formation. There was no significant difference between the control group and the 0.1% and 0.05% groups.

Conclusions

0.5% and 1% of AgNPs modified orthodontic resin exhibit an important antibacterial activity against S. mutans and L. acidophilus, and prevent the formation of WSLs.

Key words:White spot lesions, antibacterial, orthodontics, adhesive, Silver-nanoparticles.

Effectiveness of a Selective Etching Technique in Reducing White Spots Formation around Lingual Brackets: A Prospective Cohort Clinical Study

The risk of developing white spot lesions (WSLs) after orthodontic treatment with lingual brackets is generally considered lower than with labial ones, even if plaque accumulation is frequently higher due to the increased difficulty level in oral hygiene maintenance. In this prospective clinical study, selective enamel etching technique effectiveness in reducing plaque accumulation and WSLs was tested. Thirty patients were bonded with a split-mouth approach: two randomly selected opposite quadrants were used as the test sides, using customized plastic etching guides, and the other two as control sides, applying traditional direct etching methods. The plaque presence around the braces was recorded after 1, 3, 6, and 12 months according to a lingual plaque accumulation index (LPAI), as was the presence of WSLs. PAI measured values were significantly higher in the control sides during the observation period. Test and control sides differed significantly for new WSL onset only after 12 months of treatment. Therefore, the present research demonstrated that this guided enamel etching technique allowed for significant reduction in plaque accumulation around the lingual brackets and reduced onset of white spots after one year of treatment.

Evaluation of remineralization potential and cytotoxicity of a novel strontium-doped nanohydroxyapatite paste: An in vitro study

Background:

The focus of caries management has shifted to the early detection of caries and noninvasive methods of management of incipient lesions with novel remineralizing agents.

Aim:

The aim of this study is to evaluate and compare the remineralization potential of a novel laboratory synthesized strontium-doped nanohydroxyapatite (SrnHAp) paste to a commercially available regular dentifrice.

Materials and Methods:

Sixty enamel specimens (4 mm × 4 mm × 1 mm) were divided into two groups based on the type of dentifrice applied: Group I – regular toothpaste and Group II – SrnHAp paste. Calcium/phosphorous ratio of all sound specimens was evaluated using Scanning Electron Microscopy-Energy Dispersive X-ray analysis. Samples in both groups were subjected to demineralization, and the calcium/phosphorous ratio was analyzed. The samples were then subjected to remineralization using the specific agents in each group, and the mean calcium–phosphorus ratio was assessed. Cytotoxic evaluation of both pastes was done by direct microscopic observation and MTT assay.

Statistical Analysis:

Comparison of mean calcium and phosphorous values of sound enamel, demineralized, and remineralized specimen in Groups I and II was done using the one-way ANOVA and Tukeys post hoc test. Intergroup comparison after remineralization was done using the Student's t-test.

Results and Conclusion:

Group II showed higher remineralization potential than Group I and was statistically significant. Cytotoxicity of novel paste was less compared to the regular toothpaste. SrnHAp showed better remineralization than regular toothpaste and can be considered for enamel repair in incipient carious lesions.

The lingual enamel morphology and bracket shear bond strength influenced by Nd:YAG laser and aluminum oxide sandblasting preconditioning

OBJECTIVES

This study aimed to investigate the influence of Nd:YAG laser and aluminum oxide sandblasting on the shear bond strength (SBS) of lingual brackets and to optically analyze the behavior of the enamel morphology.

MATERIALS AND METHODS

Thirty-five bovines' incisors teeth were divided into 5 groups (n = 7), according to the surface preconditioning: G1, control group; G2, Nd:YAG laser; G3, laser + aluminum oxide sandblasting (Al₂O₃); G4, Al₂O₃; and G5, Al₂O₃ + laser. All groups had lingual brackets bonded and shear debonded after 72 h. SBS values were analyzed, and the enamel morphology was evaluated by optical coherence tomography (OCT) and scanning electron microscope (SEM), before and after preconditioning surface. The optical attenuation coefficient (α) analysis was obtained from OCT images. Data analysis used the ANOVA test, followed by post hoc Tukey, Kruskal Wallis, and post hoc Dunn tests (significance of 5%).

RESULTS

The SBS values presented similarly among groups, but the value of α showed statistical difference (p-value = 0.0124) between G3 and G5 with the others. Optical analyses indicated a melting on the enamel that suffered laser irradiation for G2 and G5 and crystal surface disorganization for G4. Sandblasting partially removes the melting of the laser effect (G3).

CONCLUSION

The sandblasting is a dispensable step for bonding lingual brackets, and the melting of the enamel after laser irradiation does not compromise the bracket adhesive resistance.

CLINICAL RELEVANCE

The Nd:YAG laser became an interesting tool to prevent caries and decrease prevalence of white spot lesions in orthodontic treatments, without systemic effects in patients with genetic high risks of caries.

Comparative evaluation of enamel surface roughness after debonding using four finishing and polishing systems for residual resin removal-an in vitro study

BACKGROUND

Orthodontic bonding and debonding procedures involve risk of damaging the enamel surface and changing its original morphology. The rough surface inhibits proper cleaning, invites plaque deposition, bacterial retention, and stain formation thus dampening the esthetic appearance of the teeth. Restoring the enamel to its original morphology is a challenge. Researches on better adhesive removal methods which can effectively remove the residual resin and restore it best to its original form are continuing till date. No study has compared four contemporary finishing systems for their efficiency on a single platform.

AIM

The objective of this study is to evaluate and compare enamel surface roughness after debonding using four different finishing and polishing systems.

MATERIAL AND METHODS

Adhesive resin was removed from the buccal surface of 88 premolars after debonding with 4 groups. It included 22 teeth per group: group 1-One gloss system; group 2-Enhance finishing and polishing system; group 3-fiber reinforced stainbuster bur; and group 4-Soflex discs with wheels. Roughness was measured quantitatively and qualitatively with the help of surface roughness tester and scanning electron Microscope (SEM) respectively.

RESULTS

No significant difference was found in baseline roughness in four groups. Highest post-polishing roughness was observed in Soflex group (4.62 μm) followed by One gloss system (3.36 μm), Enhance system (3.17 μm), and stainbuster bur (1.99 μm) (p value < 0.01).

CONCLUSION

Stainbuster bur created the smoothest enamel surface that was close to the natural enamel followed by Enhance system, One gloss system, and Soflex disc and wheels.

Benzalkonium chloride in an orthodontic adhesive: Its effect on rat enamel demineralization using color-based image analysis

INTRODUCTION

The aim of this study was to determine the effect of an orthodontic bonding adhesive containing benzalkonium chloride (BAC) on enamel demineralization.

METHODS

Eighteen female Sprague-Dawley rats, aged 8 to 10 weeks, were inoculated with Streptococcus sobrinus for 5 days. The animals were randomly divided into the control, non-BAC, and BAC groups. The 6 animals in each group did not receive any brackets, received brackets on the maxillary left first molars bonded with conventional adhesive, or received brackets on the maxillary left and right first molars bonded with adhesive incorporated with 0.25% and 0.75% BAC (wt/wt), respectively. After 7 weeks, the maxillae were soaked in murexide stain to observe the surface area (mm²) and percentages of enamel demineralization on the palatal, mesial, buccal, and occlusal surfaces of the maxillary molars using color-based image analysis.

RESULTS

The non-BAC and BAC groups exhibited greater enamel demineralization compared with the control group. The surface areas and percentages of enamel demineralization in the BAC group were less compared with the non-BAC group. Less enamel demineralization was noted in the animals treated with 0.75% BAC compared with those given 0.25% BAC in all areas; however, these differences were not great enough to attain statistical significance at the 0.05 level.

CONCLUSIONS

The addition of BAC to an orthodontic composite has the potential to reduce the amount and percentage of enamel demineralization. In addition to being an antibacterial agent, BAC may also have an anticariogenic effect. Increased sample sizes and testing of more concentrations of BAC are recommended.

The reproducibility of assessment of white spot lesions adjacent to orthodontic brackets, with a quantitative light induced fluorescence digital camera at different rotations of teeth - an in vitro study

Background

A quantitative light-induced fluorescence digital (QLF-D) camera is able to assess demineralizations adjacent to orthodontic brackets. Rotations of teeth during and the presence of the orthodontic appliances may influence the longitudinal follow-up of such lesions over time.

Methods

Brackets were bonded on extracted teeth: 54 incisors and 31 canines. Demineralizations were formed in vitro directly cervical of the bracket. Images were captured using a QLF-D camera mounted on an optical bench, equipped with a goniometer on a turntable. The teeth were placed in the goniometer simulating buccolingual rotation (0°, 10°, 20°), the turn-table was used for mesiodistal rotations (0°, 10°, 20°). Standardized QLF-D images were made before (with and without a wire) and after debonding at combinations of aforementioned angles of rotation. The image after debonding at 0° buccolingual and 0° mesiodistal rotation served as a control.

Results

The presence of a bracket resulted in a significantly higher fluorescence loss, yet a smaller lesion area (p < 0.05) in comparison to the control. A significant higher fluorescence loss was seen for rotations towards lingual relative to the 0° buccolingual and 0° mesiodistal rotation, while the effect was less explicit towards buccal.

Conclusions

Fluorescence loss and lesion size are influenced by the angle of rotation under which the demineralization is photographed. The full extent of demineralizations is only apparent after debonding when photographed at rotations of 0° mesiodistal and up to 20° buccal. Precaution must be taken into account assessing demineralizations of patients undergoing treatment with fixed appliances when using a QLF-D camera.

Electronic supplementary material

The online version of this article (10.1186/s12903-018-0667-3) contains supplementary material, which is available to authorized users.

Colorimetric evaluation of white spot lesions following external bleaching with fluoridation: An in-vitro study

Objective

This study was performed to investigate the effects of external tooth bleaching with flouridation on the appearance of white spot lesions (WSLs) in vitro.

Methods

In total, 125 bracket-bonded bovine incisor enamel blocks with artificial WSLs were randomly divided into a control group and four treatment groups (home bleaching, home bleaching + fluoridation, in-office bleaching, and in-office bleaching + fluoridation). A spectroradiometer (SR) and digital images (DIs) were used to evaluate colorimetric parameters (Commission Internationale l'Eclairage L^*a^*b^*) for all specimens. Color measurements were obtained before WSL formation (T1), after WSL formation (T2), and after completion of the external tooth bleaching treatment (T3).

Results

The SR-based color change after bleaching was significantly greater in the treatment groups than in the control group (p < 0.05). SR-based lightness (L^*) and red-green (a^*) values were significantly higher at T2 than at T1 (p < 0.001), with no significant changes in yellow-blue (b^*) values. At T3, SR-based L^* values had increased while a^* and b^* values had decreased in the treatment groups (p < 0.001). The DI-based color difference between the sound enamel and WSL areas (ΔE^*DI) increased significantly from T1 to T2 in all groups (p < 0.001) and significantly decreased from T2 to T3 in the treatment groups (p < 0.001). No significant differences in ΔE^*DI at T3 were shown between the four treatment groups (p > 0.05).

Conclusions

The findings of this study suggested that external tooth bleaching with fluoridation can alleviate the conspicuity of WSLs.

Do total or partial etching procedures effect the rate of white spot lesion formation? A single-center, randomized, controlled clinical trial

OBJECTIVE

To determine whether total or partial etching procedures influence the appearance of white spot lesions (WSLs).

MATERIALS AND METHODS

This split-mouth, double-blind, controlled, randomized study included 20 patients (mean age 16.75 years), who had class I malocclusion, mild crowding, and satisfactory oral hygiene. A total of 40 maxillary quadrants were randomly allocated to be treated using a total etching (TE) or partial etching (PE) protocol. Quantitative light fluorescence images were captured at the beginning and at 3 (T1) and 6 (T2) months after beginning orthodontic treatmen, as well as when the debonding phase of orthodontic treatment was complete (T3). The presence of pre- and posttreatment WSLs was assessed with quantitative light fluorescence software and analyzed with Student's t-test.

RESULTS

The analyses showed that, at T2, the total etching group had significantly higher ΔQ and A scores than the partial etching group ( P < .05). The ΔF scores increased significantly at all timepoints in the TE group, but only at T1 and T3 in the PE group. However, no differences were noted at T3 between the TE and PE groups ( P > .05). The inclusion of only right-handed people may have limited the generalizability of the findings. The absence of analyses of the plaque and gingivitis scores of patients was another limitation of this study.

CONCLUSIONS

WSL formation was observed mostly in maxillary lateral incisor teeth irrespective of the etching technique. Although PE seems to be more successful in the first 6 months, no difference was observed between PE and TE in the long term for WSL formation.

Changes in white spot lesions following post-orthodontic weekly application of 1.25 per cent fluoride gel over 6 months-a randomized placebo-controlled clinical trial. Part I: photographic data evaluation

Background

White spot lesions (WSLs) are a frequent side-effect of multibracket appliance treatment. The effect of local fluoridation on post-orthodontic WSL is however inconclusive.

Objective

Assessment of WSL changes in response to weekly 1.25 per cent fluoride gel application after multibracket appliance treatment.

Trial design

Randomized, single-centre, double-blind, parallel-group, placebo-controlled study.

Participants

Patients with not less than 1 WSL (modified score 1 or 2) on not less than 1 upper front teeth after debonding.

Interventions

Professional fluoride/placebo gel application during weeks 1-2; self-administered home application (weeks 3-24).

Outcomes

Photographic WSL assessment (dimension and luminance) of the upper front teeth (T0-T5).

Randomization

Random assignment to test (n = 23) or placebo group (n = 23) using a sequentially numbered list (random allocation sequence generated for 50 subjects in 25 blocks of 2 subjects each).

Recruitment

The clinical study duration lasted from March 2011 to September 2013.

Blinding

Unblinding was performed after complete data evaluation.

Numbers analysed

Intent-to-treat analysis set comprising 39 participants (test: n = 21, placebo: n = 18).

Outcome

Dimensional WSL quantification showed limited reliability. Luminance improvement (%) of WSL, however, was seen after 6 months (test/placebo: tooth 12, 24.8/18.0; tooth 11, 38.4/35.4; tooth 21, 39.6/38.3; and tooth 22, 15.2/25.0). No statistically significant group difference existed. Data suggest that WSLs are difficult to measure with respect to reliability and repeatability and methods for monitoring WSLs in clinical trials require improvement/validation.

Harms

Similar adverse events occurred in both groups; none was classified as possibly related to the study product.

Limitations

The number of dropouts was higher than expected and the socio-economic status was not assessed. Furthermore, the unknown level of compliance during the home application phase must be considered as limitation.

Conclusion

Based on the results of this study, no difference could be detected with respect to the development of WSL under post-orthodontic high-dose fluoride treatment.

Registration

The study was registered with ClinicalTrials.gov (Identifier: NCT01329731).

Protocol

The protocol wasn't published before trial commencement.

Effectiveness of a clinical guideline to improve dental health among orthodontically treated patients: study protocol for a cluster randomized controlled trial

BACKGROUND

White spot lesions (WSLs) occur as a side effect in over 25 % of patients who undergo orthodontic treatment, causing aesthetic problems and a risk of deeper enamel and dentine lesions. Dutch orthodontists show substantial variation in their application of WSL preventive measures, which include little incorporation of evidence from the literature. We recently developed an evidence-based clinical practice guideline (CPG) on this topic, which was further converted into a computerized clinical decision support system (CDSS) to facilitate its incorporation into clinical practice. The present study aimed to assess the effectiveness of this CPG-based CDSS, with regard to actually preventing WSL development during orthodontic treatment with fixed appliances compared to usual preventive measures. Our study also aimed to evaluate the effects of implementing the CPG-based CDSS into routine clinical practice using a multifaceted strategy.

METHODS/DESIGN

We designed a hybrid effectiveness-implementation study assessing both clinical effectiveness of the CPG and its implementation into routine practice. A total of 840 patients nested in 14 orthodontic practices will be randomly assigned as clusters to the intervention or the control arm. Patients recruited by the orthodontist in the intervention group will be treated following the CPG, while the usual preventative measures will be followed in the control arm. The primary outcome measure is the proportion of patients with newly formed or enlarged WSLs after 6-9 months of treatment with fixed appliances, and at the end of treatment, using the CPG for WSL prevention compared with usual preventive measures. An additional aim is to obtain some preliminary outcomes regarding the implementation process.

DISCUSSION

This study investigates the effectiveness of a newly developed guideline to improve oral health during orthodontic treatment, while simultaneously illuminating potential difficulties in adopting a guideline in general orthodontic practice. The innovative features of this study include the risk-based CDSS that discriminates between patients' oral health statuses with regard to preventive measure utilization in general orthodontic practices. Most studies focusing on WSL prevention apply the preventive intervention to each patient in an experimental setting, resulting in overtreatment and a disconnect from the real-world conditions in which the intervention is to be applied. Additionally, one of the overreaching goals of this initiative is to create a gold standard for WSL prevention during orthodontic treatment, against which future studies can compare new promising preventive measures and the readiness of clinicians to change and adopt new treatments. By doing so, we want to help bridge the gap between science and orthodontic clinical practice and improve the quality of oral health care.

TRIAL REGISTRATION

This trial is registered with the Dutch Trial Registry of the Dutch Cochrane Center under number NTR5012 , registration date 2 March 2015.

A practice-based evaluation of the prevalence and predisposing etiology of white spot lesions

OBJECTIVE

To use an alumni-centered, practice-based research network to evaluate white spot lesions (WSLs) among treated orthodontic patients.

MATERIALS AND METHODS

An initial survey was conducted to ascertain whether orthodontic alumni from Texas A&M University Baylor College of Dentistry were willing to participate. Twenty randomly selected alumni participated, providing 158 treated cases. Each alumnus (1) obtained internal review board consent; (2) submitted pre- and posttreatment photographs of 10 consecutively finished cases; (3) completed a treatment survey; and (4) had the patient/parent complete the American Dental Association (ADA) Caries Risk Assessment.

RESULTS

Almost 90% of the alumni surveyed were willing to participate in the practice-based research, primarily because a fellow alumnus asked them to. Approximately 28% of the patients developed WSLs. The average patient developed 2.4 white spots, affecting 12.7% of the teeth examined. WSLs were significantly (P < .001) more (2.3-3.2 times) likely for patients who were identified on the ADA Caries Risk Assessment. The risk of developing WSLs during treatment was also increased for those with fair (2.7 times) or poor (3.5 times) oral hygiene, poor gingival health (2.3 times), and extended treatment times (2.1 times).

CONCLUSIONS

There is a substantial risk of developing WSLs among private practice patients, depending partially on the length of treatment. Patients at greatest risk can be identified prior to treatment based on the ADA Caries Risk Assessment, oral hygiene, and gingival health.

Radiographic technique and brackets affect measurements of proximal enamel thickness on mandibular incisors

OBJECTIVE

To investigate the influence of radiographic film and tube positioning, the presence and the size of brackets on in vitro measurements of proximal enamel thickness of mandibular incisors on periapical radiographs aimed to aid planning of interproximal enamel reduction procedures in orthodontics.

MATERIALS AND METHODS

Eighty human mandibular incisors were assigned to sets of four and located in a customized base. Periapical radiographs were taken with the film positioned at three different angles (0°, 2°, and 5°) in relation to the frontal plane and the tube head positioned at five angles (0°, -2°, -5°, +2°, and +5°) in relation to the sagittal plane. The proximal enamel width was calculated by means of computerized image analysis and compared with measurements obtained at 0°. Statistical analysis was carried out to compare the enamel measurements on radiographs made with all angular combinations with and without the presence of brackets of different dimensions.

RESULTS

A significant difference (P < 0.05) was found between the measurements of proximal enamel width obtained at the different angles in relation to the frontal and sagittal planes for all sets with or without brackets. The presence of brackets significantly affected the measured width only for the enamel side further away from the radiation source at the sagittal plane (P < 0.05).

CONCLUSION

Angular changes in taking periapical radiographs of mandibular incisors and the presence of brackets significantly affect interproximal enamel measurements made with image analysis software.

An in Vitro Evaluation of Remineralization Potential of Novamin(®) on Artificial Enamel Sub-Surface Lesions Around Orthodontic Brackets Using Energy Dispersive X-Ray Analysis (EDX)

OBJECTIVE

To evaluate and compare the Ca/P ratio of enamel samples around the orthodontic brackets for time periods of 0, 2 and 10 days in two groups (control group and study group).

MATERIALS AND METHODS

Forty extracted teeth were randomly divided into control group and study group. All samples were demineralized and incubated in artificial saliva at 37°C for a period of 10 days after demineralization. During this phase the enamel samples in the study group were treated with remineralizing paste (NuproNusolution containing Novamin®-Dentsply) for 10 days. At the end of the incubation period, Ca/P ratios were analyzed for both the groupsby EDX analysis. Data obtained was subjected to statistical analysis using student t-test for paired samples and Student t- test for individual samples (p ≤ 0.05).

RESULTS

It was found that the mean Ca/P ratio was significantly lower for the control group as compared to the study group (p-value < 0.05) after 10 d of incubation.

CONCLUSION

Novamin(®) containing remineralization toothpaste showed significant remineralizing potential in inhibition of artificial enamel sub-surface lesion around bracket after 10 days of remineralization phase. EDX element analysis was found to be an efficient method to quantify the changes in mineral content of a sample during in vitro caries studies.

Diagnosing the severity of buccal caries lesions in orthodontic patients at de-bonding using digital photographs

OBJECTIVE

The aims of this study were (1) to evaluate the severity of buccal caries lesions according to the International Caries Detection and Assessment System (ICDAS) criteria via scoring buccal caries lesions on digital photographs at the time of de-bonding and (2) to compare this method with clinical examination.

MATERIALS AND METHODS

In total, 89 patients treated with upper and lower fixed appliances were clinically examined immediately after de-bonding by the first author and buccal caries were scored according to the ICDAS-II. Close-up digital photographs were taken of 245 teeth with different buccal caries lesion scores according to the ICDAS-II. Thirteen postgraduate orthodontics students independently scored the buccal caries lesions in the digital photographs using the modified clinical criteria (ICDAS-II). Intra- and inter-examiner reliabilities were evaluated by calculating the weighted kappa. To evaluate the validity of diagnosing the severity of buccal caries lesions using digital photographs compared to clinical examination, Spearman's correlation coefficient was calculated.

RESULTS

Intra-examiner reliability and the reliability between each examiner and the clinical examination showed moderate-to-excellent agreement, with kappa values of 0.52-0.83. Scoring buccal caries lesions via clinical examinations and scoring via photographs were well correlated according to the modified ICDAS-II criteria (Spearman's correlation coefficient, 0.76).

CONCLUSIONS

Thus, scoring buccal caries lesions on digital photographs according to ICDAS-II criteria is a reliable and valid method for assessing the severity of buccal caries lesions.

Effect of different concentrations of papain gel on orthodontic bracket bonding

Background

The objective of this study was to verify the hypothesis that enamel deproteinization with papain gel at concentrations of 2%, 4%, 6%, 8%, and 10% increases shear bond strength as concentration increases.

Methods

A total of 180 bovine mandibular permanent incisors were used, divided into six groups (n = 30), and denominated as follows: group 1 is the control group (CG) in which brackets are bonded with resin-modified glass ionomer cement (RMGIC) according to the manufacturer's recommendations and groups 2, 3, 4, 5, and 6 have brackets bonded with RMGIC after enamel deproteinization with papain gel at concentrations of 2%, 4%, 6%, 8%, and 10%, respectively. After bonding, teeth were immersed in artificial saliva and kept at a temperature of 37°C for 24 h. Mechanical tests were then performed in a universal mechanical test machine EMIC DL 5000 (Sao Jose dos Pinhais, Brazil). Values obtained were submitted to analysis of variance and then to Tukey's test (p < 0.05).

Results

The results demonstrated that groups 5 and 6 showed the highest shear bond strength, differing statistically from the other groups (p < 0.05). CG with no papain gel used showed the lowest value and in turn showed no differences for groups 2, 3, and 4. As regards adhesive remnant index, CG showed statistical differences from the others. Groups 2, 3, 4, 5, and 6, in which papain gel was used, presented no statistical differences among them (p > 0.05).

Conclusions

It was concluded that enamel deproteinization with 8% and 10% papain gel increases shear bond strength of orthodontic brackets bonded with RMGIC.

Reliability analysis of two methods for measuring active enamel demineralization: An in vitro study

OBJECTIVE

The aim was to evaluate the intra- and inter-examiner reliability of two methods, namely, digital caliper [DC] and computerized image analysis software (Image Tool [IT] version 4.1) for measuring the area of an active enamel demineralization lesion. The effect on that measurement of a window that delimits the lesion was also assessed.

MATERIALS AND METHODS

Thirty-eight circular artificial enamel demineralization lesions (r = 2 mm) were produced on bovine teeth in vitro, which were then measured three times by three examiners, with and without the presence of a window delimiting the area to be measured. The data were analyzed by the intraclass correlation coefficient (ICC) with 95% confidence interval (CI) and by the Altman and Bland analysis.

RESULTS

The intra-examiner correlation using the IT method showed excellent reproducibility (mean ICC values 0.922-0.970 with the delimiting window and 0.915-0.990 without the window). However, the intra-examiner correlation using the DC method showed comparatively less reproducibility in the measurements (mean ICC values 0.458-0.648 with the delimiting window and 0.378-0.665 without the window). The inter-examiner correlations showed very good reproducibility of the measurements regardless of the presence or absence of the window for both the DC method (0.811-0.846) and IT method (0.953-0.994). However, the latter method showed less variability within the measurements.

CONCLUSION

However, statistically no significant difference was found between both methodologies. Nevertheless, computerized image analysis with the Image Tool software demonstrated higher intra- and inter-examiner reliability than the digital caliper method, in estimating the area of the enamel demineralization lesion, regardless of the delimiting window.

Effectiveness of MI Paste Plus and PreviDent fluoride varnish for treatment of white spot lesions: a randomized controlled trial

INTRODUCTION

White spot lesions are a common sequela of orthodontic therapy. In this parallel-group randomized trial, we assessed the effectiveness of 2 agents commonly used to ameliorate white spot lesions compared with a normal home-care regimen.

METHODS

Patients aged 12 to 20 years were recruited from the offices of orthodontists and dentists who belonged to the Practice-based Research Collaborative in Evidence-based Dentistry network. The patients had their orthodontic appliances removed within the past 2 months and had at least 1 white spot lesion affecting their maxillary incisors. The subjects were randomized to 1 of 3 arms: (1) an 8-week regimen of MI Paste Plus (GC America, Alsip, Ill), (2) a single application of PreviDent fluoride varnish (Colgate Oral Pharmaceuticals, New York, NY), and (3) usual home care (control). Photographs were taken at enrollment and 8 weeks later. Two panels consisting of 5 dental professionals and 5 laypersons assessed the before-and-after pairs of photographs in a blinded fashion. Objective assessments and self-assessments were also performed.

RESULTS

One hundred fifteen subjects completed the study; 34 were assigned to the MI Paste Plus group, 40 to the fluoride varnish group, and 41 to the control group. The mean improvements assessed by the professional panel were 21%, 29%, and 27% in the MI Paste Plus, fluoride varnish, and control groups, respectively.The results from the lay panel were 29%, 31%, and 25%, respectively. Objective improvements in the surface affected were 16%, 25%, and 17%, respectively; self-assessments of improvement were 37% in all 3 groups. No assessments indicated significant differences between subjects in the active arms compared with the control arm.

CONCLUSIONS

MI Paste Plus and PreviDent fluoride varnish do not appear to be more effective than normal home care for improving the appearance of white spot lesions over an 8-week period.

Prevalence of white spot lesion in a section of Indian population undergoing fixed orthodontic treatment: An in vivo assessment using the visual International Caries Detection and Assessment System II criteria

BACKGROUND

Enamel demineralization resulting in White Spot Lesion (WSL) is one of the most common disease outcome associated with fixed orthodontic therapy with high prevalence rates in western countries. However, no such studies have been done on Indian population.

AIM

The aim of this study was to evaluate the prevalence of WSLs in a section of urban Indian population between the age group of 12-20 years undergoing fixed orthodontic therapy for a period of 12-15 months.

MATERIALS AND METHODS

180 patients who qualified for this study were examined and evaluated for WSLs: Group I (test group) comprised of 90 subjects who were undergoing orthodontic treatment for a period of 12-15 months; Group II (control group) comprised of 90 subjects who were in need of orthodontic treatment.

RESULTS

The result showed a high prevalence rate of 75.6% in Group I compared to 15.6% in Group II.

CONCLUSIONS

The study elicited significantly higher prevalence rate of WSLs in Indian patients undergoing fixed orthodontic treatment.

Effectiveness of an indirect bonding technique in reducing plaque accumulation around braces

OBJECTIVE

To evaluate if the use of an indirect braces bonding protocol for localized enamel etching and adhesive application could help reduce plaque accumulation and demineralization around the brackets compared with a conventional direct-bonding technique.

MATERIALS AND METHODS

Thirty patients were bonded with a split-mouth approach: two randomly selected opposite quadrants were used as the test sides and the other two as control sides. During the first 6 months, the plaque presence around the braces was recorded monthly according to a plaque accumulation index (PAI), as was the presence of demineralization. PAI values were measured at each of the four bracket sides for every bonded tooth. Analysis of variance was used to identify significant differences between different bracket margins and between test and control sides.

RESULTS

Test and control sides differed significantly for PAI measurements from t(1) (1 month after bonding) to t(4) (4 months after bonding), with the highest value of significance (P < .001) at t(1) but with no significant differences from t(5) to t(7) (treatment end). Considering whole-mouth results, different bracket margin PAI scores did not differ significantly. PAI scores were higher at t(1) and progressively decreased during the treatment. At debonding, the onset of 21 new white spots was recorded overall for the control sides and eight new white spots for the test sides.

CONCLUSION

Especially during the first 4 months after brackets placement, this indirect bonding protocol allowed for significant reduction in plaque accumulation around the braces and reduced onset of white spots during the orthodontic treatment.

Analysis of the effect of CPP-ACP tooth mousse on enamel remineralization by circularly polarized images

OBJECTIVE

To evaluate the effect of casein phosphopeptide-amorphous calcium phosphate tooth mousse on the remineralization of bovine incisor by circularly polarized images.

METHODS

Eighty bovine incisors, each with a 4 x 4 mm artificially demineralized area, were used. The samples were divided into four groups: Group A, casein phosphopeptide-amorphous calcium phosphate tooth mousse; Group B, fluoride toothpaste; Group C, casein phosphopeptide-amorphous calcium phosphate tooth mousse and fluoride toothpaste; and Group D, no treatment. Circularly polarized images were taken after the specimens were treated for 3, 6, 9, or 12 weeks, and the size of the demineralized area and the mean grey level were measured. Data analysis was done using repeated measures variance analysis. Pearson correlation coefficients were computed to evaluate the correlation between the size of the demineralized area and the mean grey level.

RESULTS

In all four groups, the size of the demineralized area and the mean grey level declined with time. The size of the demineralized area of Group C was significantly smaller than that of Group A at the end of the third and sixth weeks (P = .039, P = .000, respectively), and the mean grey level of Group C was lower than that of Group A at the end of the 6th and 12th weeks (P = .037, P = .004, respectively). At the end of the 6th, 9th, and 12th weeks, the size of the demineralized area of Group C was smaller (P = .000, P = .005, P = .005, respectively) and the mean grey level was lower (P = .000) than those of Group B. No statistically significant correlations were detected between the size of the demineralized area and the mean grey level.

CONCLUSION

Casein phosphopeptide-amorphous calcium phosphate tooth mousse can reduce the size and mean grey level of demineralized areas and promote the remineralization of bovine enamel. Combined application with fluoride toothpaste strengthens the effect.