Skeletal width changes after mini-implant-assisted rapid maxillary expansion (MARME) in young adults

An adult case of unilateral posterior crossbite caused by maxillary transverse deficiency treated with miniscrew-assisted rapid palatal expansion

This report describes the successful treatment of an adult case of unilateral posterior crossbite caused by maxillary transverse deficiency with miniscrew-assisted rapid palatal expansion (MARPE). A female patient aged 35.5 years presented with masticatory disturbance, facial asymmetry, and unilateral posterior crossbite. She was diagnosed with unilateral posterior crossbite with a skeletal Class III jaw-base relationship and high mandibular plane angle. Her maxillary right and mandibular bilateral second premolars were congenitally absent, and the maxillary left second premolar was impacted. After the improvement of the posterior crossbite with MARPE, 0.018″ slot lingual brackets were placed on the maxillary and mandibular dentition. The total active treatment period was 22 months, and acceptable occlusion with a functional Class I relationship was achieved. Pretreatment and posttreatment cone-beam computed tomography images showed the disarticulation of the midpalatal suture after MARPE, and changes in the dental and nasomaxillary structures, nasal cavity, and pharyngeal airway. The case results demonstrate that MARPE produces greater skeletal expansion with minimal buccal tipping of the molars. MARPE may be effective for the treatment of maxillary transverse deficiency in adult patients.

Skeletal and dentoalveolar modifications in adults with different sagittal facial patterns after personalized miniscrew-assisted rapid palatal expansion: A prospective cone-beam computed tomography study

INTRODUCTION

This study aimed to compare the skeletal and dental modifications in adults with different sagittal facial patterns by a personalized miniscrew-assisted rapid palatal expander (pMARPE).

METHODS

Forty subjects (aged 18-28 years; 15 females and 25 males) with maxillary transverse deficiency were assigned to 1 of 3 groups (Class I, II, and III relationship) on the basis of their sagittal facial patterns. Each patient was treated with an individually customized expander. A similar expansion protocol was used for all patients. Cone-beam computed tomography scans were obtained before and after expansion. One-way analysis of variance was used to analyze differences among 3 groups in skeletal, dentoalveolar, and periodontal changes (P <0.05).

RESULTS

The success rates of expansion were higher in patients with a Class I or II relationship than those with a Class III relationship. Patients with a Class I or II relationship had greater changes in the anterior nasal spine and maxillary basal bone widths. A more parallel sutural opening in the anteroposterior direction was seen in those with a Class II relationship. The tipping of the maxillary first molar increased, and the buccal alveolar bone thickness decreased in all groups after expansion, especially in patients with a Class III relationship.

CONCLUSIONS

The pMARPE effectively split the midpalatal suture among adults. However, midpalatal suture expansion was more difficult, and there were more dentoalveolar side effects and fewer orthopedic effects in patients with a Class III relationship than in those with Class I or II relationships.

Stress distribution and displacement with four different types of MARPE on craniofacial complex: A three-dimensional finite element analysis

BACKGROUND

Various designs of mini-implants assisted rapid palatal expander (MARPE) appliances can impact treatment effectiveness through their biomechanical effects. The purpose of the study was to study the stress distribution and displacement with four different designs of the MARPE appliance on the craniofacial complex.

METHODS

A 3D finite element model of the craniofacial complex was created from CBCT DICOM data, comprising four distinct groups. Each group consisted of one 4-hole expansion screw positioned between the second premolar and first molar in all models. Group 1 used four single-cortical mini-implants (1.5×8mm) engaging only the palatal cortex. Group 2 employed four mini-implants (1.5×11mm) engaging both the palatal and nasal cortices. Group 3 had monocortical implants on the palatal slopes, while Group 4 was similar to group 3 with implants in the acrylic wings. Comparisons between groups were made for anchorage (groups 1 and 2), mini-implant position (groups 1 and 3) and surface effect (groups 3 and 4). Von Mises stresses and displacements at various skeletal and dental points were evaluated using ANSYS software.

RESULTS

The highest stresses were observed in the maxillary, pterygoid and zygomatic bones, as well as in the mid- palatal suture in all four groups. Downward and forward rotation of the craniofacial complex was noted. Group 2 showed greater skeletal expansion than group 1. Among groups 1 and 3, group 3 showed a better stress distribution. Group 4 showed less dentoalveolar rotation than group 3.

CONCLUSIONS

The MARPE appliances had an impact on the craniofacial complex with stresses on the mid-palatal suture, maxillary bone, pterygoid bones and anterior teeth. Clockwise rotation of the maxilla, zygomatic bones and dentition was noted, while the pterygoid bones and pterygoid suture were displaced backwards. MARPE with bicortical anchorage produces better skeletal expansion. Placing implants on the palatal slopes with acrylic wings results in better skeletal expansion with less clockwise rotation of the dentition.

Long-term efficacy and stability of miniscrew-assisted rapid palatal expansion in mid to late adolescents and adults: a systematic review and meta-analysis

BACKGROUND

The purpose of this study is to investigate the long-term efficacy and stability of Miniscrew-assisted Rapid Palatal Expansion (MARPE), including its primary outcomes, namely the nasomaxillary complex transverse skeletal and dental expansion, and related secondary outcomes.

METHODS

Electronic databases and manual literature searches, up to October 31, 2022, were performed. The eligibility criteria were the following: studies on patients with transverse maxillary deficiency treated with MARPE in adults and adolescents over 13.5 years of age.

RESULTS

Ultimately, twelve articles were included in the analysis, one prospective and eleven retrospective observational studies. Five studies showed a moderate risk of bias, while the remaining seven studies were at a serious risk of bias. The GRADE quality of evidence was very low. MARPE is an effective treatment modality for transverse maxillary deficiency (mean success rate: 93.87%). Patients showed increased mean in the skeletal and dental transverse expansion. The basal bone composition, mean alveolar bone and mean dental expansion accounted for 48.85, 7.52, and 43.63% of the total expansion, respectively. There was a certain degree of skeletal and dental relapse over time. MARPE could also cause dental, alveolar, and periodontal side effects, and have an impact on other craniofacial bones, upper airway, and facial soft tissue.

CONCLUSIONS

MARPE is an effective treatment for transverse maxillary deficiency, with a high success rate and a certain degree of skeletal and dental relapse over time.

Immediate dentoskeletal and periodontal effects of miniscrew-assisted rapid palatal expansion: Comparison between young vs middle-aged adults

INTRODUCTION

This study aimed to compare the dentoskeletal and periodontal changes after miniscrew-assisted rapid palatal expansion (MARPE) in patients aged 18-29 and 30-45 years.

METHODS

The sample comprised 28 subjects with transverse maxillary discrepancy successfully treated with MARPE. The young adult (YA) group comprised 14 subjects (mean age, 22.8 years; 3 male, 11 female). The middle adult (MA) group comprised 14 subjects (mean age, 36.8 years; 6 male, 8 female). All patients were treated with a 4-miniscrew MARPE expander. The activation protocol was one quarter turn twice a day until the midline diastema opening, followed by one quarter turn a day until overcorrection. Cone-beam computed tomography (CBCT) scans taken before and immediately after the expansion was analyzed using OnDemand3D Dental software. Using CBCT coronal images, transversal dentoskeletal and periodontal variables were measured in the preexpansion and postexpansion. Intergroup comparisons of expansion changes were performed using t and Mann-Whitney tests (P <0.05).

RESULTS

Groups were compatible at preexpansion for most CBCT measurements. A success rate of midpalatal suture opening of 100% and 81% was observed for YA and MA groups, respectively. No intergroup differences were found for the maxillary and dental arch widths increases. The buccal tip of anchorage teeth was observed similarly in both groups. The buccal bone thickness of posterior teeth decreased, and the palatal bone thickness increased after expansion with no difference between groups.

CONCLUSIONS

After MARPE, the MA group showed similar dentoskeletal and periodontal changes compared to the YA group.

Midpalatal suture bone repair after miniscrew-assisted rapid palatal expansion in adults

Background

Midpalatal suture (MPS) repair in growing patients after RPE has been previously reported. However, differences between young and adult patients for timing and pattern of MPS repair after rapid maxillary expansion are expected. The aim of this study was to evaluate the midpalatal suture repair pattern after miniscrew-assisted rapid palatal expansion (MARPE) in adult patients.

Materials and methods

The study included 21 patients (six males, 15 females) successfully treated with MARPE with a mean initial age of 29.1 years of age (SD = 8.0; range = 20.1–45.1). MPS repair was evaluated using maxillary axial and coronal sections derived from CBCT exams taken 16 months after the expansion (SD = 5.9). Objective and subjective assessments of MPS repair were performed. Objective assessments were performed measuring MPS bone density at anterior, median and posterior region of hard palate. Pre-expansion and post-retention bone density changes were evaluated using paired t tests (p < 0.05). Midpalatal suture bone repair was scored 0 to 3 considering, respectively, the complete absence of bone repair in the MPS, the repair of less than 50% of the MPS, the repair of more than 50% of the MPS and the complete repair of the MPS. Intra- and interexaminer reliability evaluation were assessed using Kappa coefficient.

Results

The objective evaluation showed a significant higher bone density at the pre-expansion stage in all palatal regions. The reliability of the subjective method was adequate with intra- and interexaminer agreements varying from 0.807 to 0.904. Scores 1, 2 and 3 were found in 19.05%, 38.09% and 42.86% of the sample, respectively. The most common region demonstrating absence of bone repair was the middle third. The anterior third of the midpalatal suture was repaired in all patients.

Conclusions

A decreased bone density was observed after the retention period when compared to pre-expansion stage. Most adult patients demonstrated incomplete repair of the midpalatal suture 16 months after MARPE. However, adequate bone repair covering more than half of the hard palate extension was observed in 80.95% of the patients.

Effectiveness of miniscrew assisted rapid palatal expansion using cone beam computed tomography: A systematic review and meta-analysis

Objective

This study aims to examine the effectiveness of miniscrew assisted rapid palatal expansion (MARPE) treatment in late adolescents and adult patients using cone-beam computed tomography (CBCT).

Methods

Literature search was conducted in five electronic databases (PubMed, Embase, Scopus, Web of Science, and Cochrane Library) based on the PICOS keyword design focusing on MARPE. Out of the 18 CBCT screened outcomes, only nine parameters were sufficient for the quantitative meta-analysis. The parameters were classified into three main groups 1) skeletal changes, 2) alveolar change, and 3) dental changes. Heterogeneity test, estimation of pooled means, publication bias, sensitivity analysis and risk of bias assessment were also performed.

Results

Upon database searching, only 14 full-text articles were qualified from the 364 obtained results. Heterogeneity test indicated the use of the random-effects model. The pooled mean estimate were as follows 1) Skeletal expansion zygomatic width, 2.39 mm; nasal width, 2.68 mm; jugular width, 3.12 mm; and midpalatal suture at the posterior nasal spine and anterior nasal spine, 3.34 mm and 4.56 mm, respectively; 2) Alveolar molar width expansion, 4.80 mm; and 3) Dental expansion inter-canine width, 3.96 mm; inter-premolar width, 4.99 mm and inter-molar width, 5.99 mm. The percentage of expansion demonstrated a skeletal expansion (PNS) of 55.76%, alveolar molar width expansion of 24.37% and dental expansion of 19.87%.

Conclusions

In the coronal view, the skeletal and dental expansion created by MARPE was of the pyramidal pattern. MARPE could successfully expand the constricted maxilla in late adolescents and adult patients.

Skeletal and alveolar changes in conventional rapid palatal expansion (RPE) and miniscrew-assisted RPE (MARPE): a prospective randomized clinical trial using low-dose CBCT

Background

This prospective randomized clinical trial aimed to evaluate the immediate and short-term skeletal, dentoalveolar, and periodontal effects of rapid palatal expansion (RPE) and miniscrew-assisted RPE (MARPE) in adolescent and young adult patients.

Methods

This study followed a two-arm, parallel, randomized clinical trial design that recruited patients with transverse maxillary deficiency in a 1:1 allocation ratio. Forty patients (14 men and 26 women) requiring maxillary expansion were randomly allocated to the RPE (n = 20, age = 14.0 ± 4.5) or MARPE (n = 20, age = 14.1 ± 4.2) groups. The assignment was performed via computer-generated block randomization, with a block size of four. Upon identical (35 turns) amount of expansion, low-dose cone-beam computed tomography images were taken before treatment (T0), immediately after expansion (T1), and after a 3-month consolidation period (T2). The primary outcome of this study comprised the assessment of midpalatal suture separation. Secondary outcomes included, skeletal, dentoalveolar, and periodontal measurements, which were performed at each time point.

Results

The frequency of midpalatal suture separation was 90% (18/20) and 95% (19/20) for the RPE and MARPE groups, respectively. A greater increase in nasal width in the molar region (M-NW) and greater palatine foramen (GPF) was observed immediately after the expansion (T1-T0) and consolidation periods (T2-T0) in the MARPE group compared to the RPE group (P < 0.05). The MARPE and RPE groups showed similar dentoalveolar changes except for the maxillary width (PM-MW, M-MW). The MARPE group presented greater bilateral first premolar (PM-MW) and molar (M-MW) maxillary width in relation to the RPE group (P < 0.05). Through the expansion and consolidation periods (T2-T0), lesser buccal displacement of the anchor teeth was observed in the MARPE group (PM-BBPT, PM-PBPT, M-BBPT [mesial and distal roots], and M-PBPT)( P < 0.05).

Conclusions

Midpalatal suture separation was observed in 90% and 95% of patients in the RPE and MARPE groups, respectively. Both RPE and MARPE groups exhibited significant triangular basal bone expansion and skeletal relapse during consolidation. Under identical amounts of expansion, the MARPE group showed lower decrease in the skeletal, dentoalveolar and periodontal variables after consolidation. The reinforcement of RPE with miniscrews contributes to the maintenance of the basal bone during consolidation period.

Trial registration WHO Institutional Clinical Trials Registry Platform (IRB No. KCT0006871 / Registration date 27/12/2021).