Anterior maxillary dentoalveolar and skeletal cephalometric factors involved in upper incisor crown exposure in subjects with Class II and III skeletal open bite

Effects of Occlusal Contact on Maxillary Alveolar Bone Morphology in Patients with and without Anterior Open Bite: A Cross-Sectional Study

Background/Objectives: Anterior open bite (AOB) is characterized by the absence of occlusal contact between the maxillary and mandibular anterior teeth, while the posterior teeth are in contact when occluded. Here, we aimed to clarify the difference in maxillary alveolar bone morphology in adult patients with and without AOB. Methods: This cross-sectional study was conducted on 50 adults aged 18-39 years: 25 patients without AOB (control group; 13 males and 12 females; age: mean ± standard deviation [SD], 22.2 ± 4.5 years) and 25 patients with AOB (9 males and 16 females; age: 24.2 ± 6.4 years). Using cone-beam computed tomography images, the height of the maxillary alveolar bone crest in the anterior and posterior teeth and thickness of the alveolar cortical bone on the labial and palatal sides were measured and compared between the two groups. An independent t-test and Pearson's correlation analysis were used to examine statistical significance (p < 0.05). Results: The AOB group showed a significantly longer (p = 0.016) posterior alveolar crest and thinner cortical bone on the buccal (p < 0.001) and lingual (p = 0.009) sides of the anterior region and the buccal (p = 0.006) sides of the posterior region than the control group did. Moreover, a significant negative correlation (p = 0.046; r = -0.403) was observed between bite force and cortical bone thickness on the buccal side of the posterior region in the AOB group. Conclusions: It is suggested that the absence of occlusal contact in the anterior area influences the alveolar bone morphology of the maxilla.

Incisor and Soft Tissue Characteristics of Adult Bimaxillary Protrusion Patients among Different Skeletal Anteroposterior Classifications

The objective of this study was to investigate the upper incisors (U1), lower incisors (L1), and soft tissue profiles of bimaxillary protrusion (BM) adult patients among skeletal Class I (BM1), II (BM2) and III (BM3). Understanding these characteristics would be useful for incisor and lip diagnostics in different skeletal classifications. Fourteen linear and twelve angular variables of the incisors and lips were evaluated in 214 lateral cephalograms (BM1 = 91, BM2 = 84, BM3 = 39). ANOVA and Bonferroni tests compared the measurements. BM1 and BM3 exhibited a greater U1 position and U1 inclination than the norms, while BM2 presented only a greater U1 position than the norms but normal U1 inclination. BM1 and BM3 had a significantly greater U1 position than BM2. BM1 and BM2 demonstrated a greater L1 position and L1 inclination than the norms, whereas BM3 displayed only a greater L1 position than the norms but normal L1 inclination. BM2 had the most anterior L1 position, whereas BM3 had the least anterior position. Only BM2 had a longer anterior dental height (ADH) than the norms, while BM1 and BM3 had a normal ADH and the significantly shortest ADH, respectively. Only BM1 had a normal upper incisor display at rest (U1R), while BM2 and BM3 displayed an increased and decreased U1R, respectively, with significant differences among the three groups. The most significantly protruded upper and lower lips were presented in BM2, but these were exhibited the least in BM3. The most significant acute nasolabial angle (NLA) was found in BM3, whereas BM2 presented the least acute NLA. A normal lip-chin-throat angle (LCTA) was observed in BM1 and BM3, while only BM2 had a greater LCTA than the norms. The most significant obtuse LCTA was found in BM2, while BM3 had the least obtuse LCTA. Therefore, both U1 and L1 in all groups presented protrusion and proclination, except for U1 in BM2, while L1 in BM3 exhibited normal inclination. The ADH and U1R were increased in BM2 but decreased in BM3. The most acute NLA was found in BM3, whereas the least acute was found in BM2. The most obtuse LCTA was in BM2, while the least was in BM3.

Three-Dimensional Analysis of Alveolar Bone Morphological Characteristics in Skeletal Class II Open Bite Malocclusion: A Cone-Beam Computed Tomography Study

This cross-sectional research evaluated the morphological characteristics of alveolar bone in skeletal class II open-bite individuals compared to skeletal class II and class I non-open-bite individuals. A sample of 82 patients (all were in cervical vertebral stage 6) was divided into three groups (class II OB group, n = 29; class II NOB group, n = 29; class I NOB group, n = 24) according to bilateral molar relationship, ANB angle, and anterior overbite measured by cephalometric analysis. The evaluation was performed with specialized software (Mimics 21.0) and initial cone-beam computed tomography (CBCT) data. The alveolar bone height and thickness of the whole dentition area and alveolar crest level and root apex position of the incisors were measured with a series of appropriate CBCT images. One-way analysis of variance followed by the Tukey post hoc test and the Kruskall−Wallis test were performed for statistical comparisons. The class II open-bite group had increased alveolar bone height for the maxillary first molar and decreased alveolar bone height for mandibular molars compared to the class II non-open-bite group (p < 0.05 for both). Furthermore, there were significant negative correlations between the alveolar bone heights of the upper first and second molars (A6-height, A7-height) and overbite (both p < 0.01). The alveolar thicknesses of all measured teeth were generally reduced in the class II OB group.

Dentogingival display through lip border movements: Report of the Committee on Research in Fixed Prosthodontics of the American Academy of Fixed Prosthodontics

STATEMENT OF PROBLEM

Dentists strive to create natural looking teeth for their patients. However, much of the research on esthetic dentistry has used artificial and computer-generated images to establish esthetic norms. Altered images are helpful in determining personal preferences but may be misleading for natural norms.

PURPOSE

The purpose of this report from the Committee on Research in Fixed Prosthodontics of the American Academy of Fixed Prosthodontics was to establish an evidence base for clinical guidelines on lip mobility and the visibility of oral tissues.

MATERIAL AND METHODS

A systematic search was conducted to collect data on the lip border movements and the visibility of teeth and gingiva of human participants.

RESULTS

One thousand and ninety-six articles were processed, and, based on inclusion criteria, 48 articles were reviewed. The findings determined that the upper lip lengthens with age resulting, at rest, in less display of the maxillary teeth and more of the mandibular arch. When evaluating the maxillary incisal edge position at rest, the canines are the most reproducible. Women tend to display more gingiva in a social smile than men, but this may not be so for a true smile of joy. Both the middle and lower facial thirds should be evaluated to detect a maximal smile. Care must be taken not to classify a person incorrectly as having a low smile line because they could still have a potential to show gingiva.

CONCLUSIONS

Evidence-based clinical guidelines are offered to reduce the risk of esthetic failures.

Incisor root length in individuals with and without anterior open bite: a comparative CBCT study

OBJECTIVE

This study aimed to compare the root length of maxillary and mandibular incisors between individuals with open bite versus matched individuals with adequate overbite.

METHODS

This comparative, matched and retrospective study included 48 cone beam computed tomographies (CBCTs) obtained at a university radiological center. Scans belonged to 24 individuals with open bite (overbite ≤ 0 mm) and 24 individuals with adequate overbite (controls). Both groups were matched by age, sex, malocclusion classification and skeletal characteristics (ANB and FMA angles). Root length of each maxillary and mandibular incisor was measured in millimeters (mm) in a sagittal section from a perpendicular line to the enamel cement junction until the root apex (384 length measurements were made). The means of root length in both groups were compared using t-tests. In addition, correlations between variables were evaluated with the Pearson correlation coefficient (α = 0.05).

RESULTS

In both groups, the root length of the upper central incisors was approximately 12 mm and the root length of the maxillary lateral incisors was approximately 13 mm (p˃ 0.05). Likewise, the root length of lower central incisors in both groups measured approximately 12 mm (p˃ 0.05). However, the mandibular lateral incisor roots of open bite patients were significantly longer than in the normal overbite patients (approximately 1 mm, p= 0.012 right side, p= 0.001 left side).

CONCLUSIONS

Root length of maxillary incisors and central mandibular incisor is similar in individuals with or without open bite, but the mandibular lateral incisor roots in open bite patients were significantly longer than in the normal overbite patients.

Relationship between the Condylion-Gonion-Menton Angle and Dentoalveolar Heights

An accurate estimation of both facial growth and the dentoalveolar dimension is key to successful treatment. The aim of this study was to analyze the relation between the Condylion–Gonion–Menton angle (CoGoMe^) and dentoalveolar heights in a population of patients from southern Italy. This retrospective study analyzed 270 cephalograms of 115 males (42.1%, mean age 15.5 ± 5.2 years) and 155 females (57.9%, mean age 15.6 ± 5.9 years). The facial divergency was evaluated with the Sella–Nasion and Gonion–Gnation angle (SN^GoGn), mandibular structure with the CoGoMe^, and dentoalveolar heights were assessed in four measurements: upper anterior (UADH), lower anterior (LADH), upper posterior (UPDH), and lower posterior (LPDH). Data were analyzed by means of Pearson’s correlation and linear regression model (p < 0.05). All the dentoalveolar heights were strongly correlated among them (p < 0.001). The UADH was correlated with the SN^GoGn (r = 0.145; p = 0.017), while the LPDH was correlated with the CoGoMe^ (r = −0.183; p = 0.003). Moreover, there was a positive association between the UADH and the SN^GoGn (B = 0.08; 95% CI: 0.014–0.144; p = 0.017), and a negative association between the CoGoMe^ and the LPDH (B = −0.098; 95% CI: −0.161–0.035; p = 0.003). Facial divergency and mandibular structure are associated with dentoalveolar heights.

The maxillary incisor display at rest: analysis of the underlying components

Introduction:

Maxillary incisal display is one of the most important attributes of smile esthetics.

Objective:

The aim of this study was to determine the relationship between maxillary incisal display at rest (MIDR) and various soft tissue, hard tissue and dental components.

Methods:

A cross-sectional study was conducted on 150 subjects (75 males, 75 females) aged 18-30 years. The MIDR was recorded from the pretreatment orthodontic records. The following parameters were assessed on lateral cephalograms: ANB angle, mandibular plane angle, palatal plane angle, lower anterior and total anterior facial heights, upper incisor inclination, upper anterior dentoalveolar height, and upper lip length, thickness and protrusion. The relationship between MIDR and various skeletal, dental and soft tissue components was assessed using linear regression analyses.

Results:

The mean MIDR was significantly greater in females than males (p = 0.011). A significant positive correlation was found between MIDR and ANB angle, mandibular plane angle and lower anterior facial height. A significant negative correlation was found between MIDR and upper lip length and thickness. Linear regression analysis showed that upper lip length was the strongest predictor of MIDR, explaining 29.7% of variance in MIDR. A multiple linear regression model based on mandibular plane angle, lower anterior facial height, upper lip length and upper lip thickness explained about 63.4% of variance in MIDR.

Conclusions:

Incisal display at rest was generally greater in females than males. Multiple factors play a role in determining MIDR, nevertheless upper lip length was found to be the strongest predictor of variations in MIDR.