Risk factors for noncarious cervical lesions: A case-control study

OBJECTIVES

Noncarious cervical lesions (NCCLs) are multifactorial and can be caused by the anatomical structure of the teeth, erosion, abrasion and abnormal occlusion. The aim of this case-control study was to explore the risk factors for NCCLs.

METHODS

Cone-beam computed tomography was used to determine whether a wedge-shaped defect existed at the cementoenamel junction. We compared 63 participants with NCCLs with 63 controls without NCCLs, matched for sex, age (±1 year) and toothbrushing-related factors (e.g., type of bristle and brushing patterns, frequency and strength). All participants were asked to complete a questionnaire about self-administered daily diet habits and health condition. Univariate and multivariate logistic regression analyses were conducted to determine the risk factors for NCCLs.

RESULTS

Significant variables in the univariate analysis (i.e., p < .2) included frequency of carbonated beverage consumption, sella-nasion-point B angle (SNB) and Frankfort-mandibular plane angle (FMA). Multivariate logistic regression demonstrated that the consumption frequency of carbonated beverages (odds ratio [OR] = 3.147; 95% confidence interval [CI], 1.039-9.532), FMA (OR = 1.100; 95% CI, 1.004-1.204) and SNB (OR = 0.896; 95% CI, 0.813-0.988) was independent influencing factors. The area under the receiver operating characteristic curve (AUC) value of regression Model 1 (established with the frequency of carbonated beverage consumption, FMA, SNB and sleep bruxism) was 0.700 (95% CI, 0.607-0.792; p < .001), and that of regression Model 2 (established using the frequency of carbonated beverage consumption, FMA and SNB) was 0.704 (95% CI, 0.612-0.796; p < .001).

CONCLUSIONS

The consumption frequency of carbonated beverages and FMA was risk factors for NCCLs; the higher the frequency of carbonated beverage consumption and FMA, the higher was the probability of NCCLs. SNB was a protective factor for NCCL occurrence; the larger the SNB, the lower was the probability of NCCL occurrence. These findings have further clarified the aetiology of NCCLs and provided clinicians with valuable insights into strategies for preventing the loss of dental tissue.

Noncarious cervical lesions: Response from a 25-year clinical follow-up study

STATEMENT OF PROBLEM

The etiology and diagnosis of noncarious cervical lesions (NCCLs) remain poorly understood.

PURPOSE

The purpose of this clinical study was to examine NCCL progression in an existing group of participants, establish the incidence of new NCCLs in a 25-year follow-up study, and relate them to possible risk factors, including occlusal factors.

MATERIAL AND METHODS

Thirty-three participants who had completed a questionnaire about their habits, diet, and personal information were evaluated in this observational retrospective study. Impressions were made, and casts from 3 time periods (Phase I in 1996, Phase II in 1999, and Phase III in 2021) were scanned to obtain digital casts. The casts were then evaluated in a 3-dimensional analysis software program (Geomagic Control; 3D Systems) to establish digital comparisons between NCCLs and occlusal wear. Furthermore, data from an occlusal analysis device (T-Scan; Tekscan) collected in Phase I was used to analyze occlusal interferences relating to the progression of NCCLs. The statistical analysis applied nonparametric tests, followed by the assessment of the association between NCCLs and risk factors, including occlusal wear, through binary logistic regression (α=.05).

RESULTS

At the end of Phase III, 7 new individuals with NCCLs were detected compared with Phase II. The median percentage progression of NCCLs per participant was 0.0% in Phase I, 7.1% in Phase II, and 35.7% in Phase III (P<.005). Occlusal wear in Phase I was associated with 5.02 times the occurrence of NCCLs in Phase III; occlusal wear in Phase II was associated with 4.73 times the occurrence of NCCLs in Phase III; and occlusal wear in Phase III was associated with 1.94 times the occurrence of NCCLs in Phase III (P<.001). Occlusal interference in border movements of the mandible was associated with a 3.55 times greater chance of presenting NCCLs in Phase III (P<.001). Additionally, statistically significant risk factors for the presence of NCCLs in Phase III were an acidic diet (P=.043) and alcohol consumption (P=.021).

CONCLUSIONS

The 25-year data showed an association between NCCLs and specific risk factors, including occlusal wear and occlusal interferences.

Noncarious cervical lesions: Morphology and progression, prevalence, etiology, pathophysiology, and clinical guidelines for restoration

PURPOSE

To synthesize the literature regarding noncarious cervical lesions (NCCLs) and propose clinical guidelines when lesion restoration is indicated.

MATERIAL AND METHODS

A PubMed search was performed related to NCCL morphology, progression, prevalence, etiology, pathophysiology, and restoration.

RESULTS

NCCLs form as either rounded (saucerlike) depressions with smooth, featureless surfaces that progress mainly in height or as V-shaped indentations that increase in both height and depth. Prevalence ranges from less than 10% to over 90% and increases with age. Common locations are the facial surfaces of maxillary premolars. They have a multifactorial etiology due to personal habits such as excessive horizontal toothbrushing and consumption of acidic foods and drinks. Occlusal factors have been identified as contributing to the prevalence of NCCLs in some studies, whereas other studies indicate there is no relationship. The concept of abfraction has been proposed whereby mechanical stress from occlusal loading plays a role in the development and progression of NCCLs with publications supporting the concept and others indicating it lacks the required clinical documentation. Regardless of the development mechanism, demineralization occurs and they are one of the most common demineralization diseases in the body. Treatment should be managed conservatively through preventive intervention with restorative treatment delayed until it becomes necessary due to factors such as lesion progression, impact on patient's quality of life, sensitivity, poor esthetics, and food collection may necessitate restoration. Composite resins are commonly used to restore NCCLs although other materials such as glass ionomer and resin-modified glass ionomer are also used. Sclerotic dentin does not etch like normal dentin and therefore it has been recommended to texture the dentin surface with a fine rotary diamond instrument to improve restoration retention. Some clinicians use mechanical retention to increase retention. Beveling of enamel is used to increase the bonding area and retention as well as enhance the esthetic result by gradually creating a color change between the restoration and tooth. Both multistep and single-step adhesives have been used. Dentin etching should be increased to 30 seconds due to the sclerotic dentin with the adhesive agent applied using a light scrubbing motion for 20 seconds but without excessive force that induces substantial bending of a disposable applicator. Both flowable and sculptable composite resins have been successfully used with some clinicians applying and polymerizing a layer of flowable composite resin and then adding an external layer of sculptable composite resin to provide enhanced resistance to wear. When caries is present, silver diamine fluoride has been used to arrest the caries rather than restore the lesion.

CONCLUSIONS

Noncarious cervical lesions (NCCLs) form as smooth saucerlike depressions or as V-shaped notches. Prevalence values as high as 90% and as low as 10% have been reported due to habits such as excessive toothbrushing and an acidic diet. Occlusal factors have been proposed as contributing to their presence but it remains controversial. Publications have both supported and challenged the concept of abfraction. They are one of the most common demineralization diseases in the body. Conservative treatment through prevention is recommended with restorative treatment delayed as long as possible. When treatment is needed, composite resins are commonly used with proposed restorative guidelines including texturing the sclerotic dentin, beveling the enamel, potential use of mechanical retention, 30 seconds of acid etching, and use of either multistep or single-step adhesives in conjunction with a light scrubbing motion for 20 seconds without excessive force placed on disposable applicators.

Association of Non-carious Cervical Lesions with Oral Hygiene Aspects and Occlusal Force

AIM

The purpose of this case-control (CT) study was to investigate the association between the presence of non-carious cervical lesions (NCCLs) with occlusal force and other potential risk factors.

MATERIALS AND METHODS

Thirty-nine participants with NCCLs [cases (CS)] and 39 with no NCCLs [control (CT)] attending the dental clinic of the Faculdades Integradas São Pedro (FAESA), located in Brazil, were enrolled in this study. Information was collected through anamnesis, clinical examination, and a questionnaire addressing aspects related to tooth brushing, dentifrice, and mouthwash use. In clinical examination, patients were submitted to four measurements of occlusal force in the maxillary first premolars and maxillary first molars, using a strain gauge sensor of medium intensity, the Flexiforce (Tekscan, South Boston, Massachusetts, United States of America). The sensor was calibrated for the unit of measurement in Newtons (N). Data were analyzed using a student's t-test and multiple logistic regression, e with a significance level of 5%.

RESULTS

There was no statistically significant difference between the case and CT groups regarding the bite force in the four measured regions. Logistic regression identified sex as a factor significantly associated with NCCLs (p = 0.020). The odds ratio showed the female sex had more chance (OR = 6.082; CI = 1.332-27.765) of having NCCLs.

CONCLUSION

It is concluded that females presented a higher risk factor for NCCLs than men. In contrast, there was no association of occlusal force, as well as aspects related to brushing and deleterious habits.

CLINICAL SIGNIFICANCE

Females have a higher risk factor for non-carious lesions than men.

Progression of non-carious cervical lesions: 3D morphological analysis

OBJECTIVES

This longitudinal study aimed to investigate morphologically and quantitatively the progression of non-carious cervical lesions (NCCLs) using a confocal laser scanning microscope (CLSM) and replica models.

MATERIALS AND METHODS

The samples examined comprised sets of replicas annually obtained from 83 lesions in 16 participants over 3 to 5 years. All lesions were visually categorized as wedge-shaped, saucer-shaped, or mixed-shaped lesions. CLSM images of the replicas were analyzed in terms of axial depth, occlusogingival width (height) in the buccolingual cross-section, and estimated volume using a custom code of the image analysis software to estimate the progression of the NCCLs over time. The morphological characteristics of the NCCLs were also objectively divided into three groups according to the depth to height ratio (D/H ratio). Fisher's exact test and the Cochran-Armitage trend test were used for statistical analysis.

RESULTS

Saucer-shaped lesions progressed mainly in height, whereas wedge-shaped lesions increased both in height and depth. Annual progression in depth and volume significantly increased as the D/H ratio increased. More than half of the NCCLs with a small D/H ratio progressed 50 μm or more in height, whereas none of them progressed more than 50 μm in depth. Annual progression in depth significantly increased as the lesion depth at baseline increased.

CONCLUSIONS

Progression patterns significantly differed between NCCLs of different shapes. Most NCCLs progressed slowly in depth regardless of their shape. Moreover, NCCLs may progress through active and inactive stages.

Effect of cervical lesion centered access cavity restored with short glass fibre reinforced resin composites on fracture resistance in human mandibular premolars- an in vitro study

AIM

The aim of this study was to evaluate the fracture resistance of cervical lesion centered access cavity restored with short glass fibre reinforced resin materials in human mandibular premolars.

MATERIALS AND METHODS

Sixty freshly extracted human mandibular premolars were collected and assigned to positive control group (G1- Intact teeth) and other experimental groups (G2, G3. G4, G5, G6), Traditional Access Cavity(TAC) and Cervical Lesion Centered Access Cavity(CLCAC). Following endodontic therapy, samples were grouped accordingly, G2-CLCAC without restoration (Negative Control), G3-CLCAC restored with conventional nano-hybrid composite (Tetric-N-Ceram), G4-TAC restored with short glass fibre reinforced resin composite (Ever-X Posterior), G5-CLCAC restored with short glass fibre reinforced resin composite (Ever-X Posterior), G6- CLCAC restored with individually formed unidirectional fibre-reinforced post (Everstick post) and short glass fibre-reinforced resin composite (Ever-X Posterior). The samples were thermocycled (35 °C/28s, 15 °C/2s, 35 °C/28s, 45 °C/2s/10,000 cycles) and cyclically fatigued(2,50,000 cycles/15-30N/2 Hz) and then subsequently loaded to failure. The mean load to fracture (Newtons) were statistically analyzed using one-way ANOVA and Tukey's post HOC test and failure mode analysis was also done.

RESULTS

The mean fracture resistance of the CLCAC design restored with fibre reinforced materials was higher when compared to the TAC design but the difference was not statistically significant. The negative control group (CLCAC without restoration) showed significantly the least fracture resistance (P < 0.05) when compared to all the other groups except for group 3 (CLCAC restored with conventional composites).

CONCLUSIONS

Within the limitations of the study, it can be concluded that short glass fibre reinforced resin composites improved the fracture resistance of endodontically treated mandibular premolars irrespective of the type of access cavity designs. Favourable fractures were seen more in cervical lesion centered access cavity restored with short glass fibre reinforced composite materials. Nevertheless, the applicability of this design in multirooted teeth, canal cleanliness efficacy, and long term clinical performance are yet to be explored to complement this new access design.

The Role of Occlusal Factors in the Presence of Noncarious Cervical Lesions in Young People: A Case-Control Study

Objective:

The aim of this retrospective case-control study was to evaluate the influence of different occlusal characteristics and self-referred bruxism in the presence of noncarious cervical lesions (NCCLs).

Methods and Materials:

The participants were 280 students (140 cases and 140 controls), with an average age of 24.5 years, from six schools of dentistry in Spain. Clinical examination was carried out to record the NCCLs and the static and dynamic occlusal characteristics. The side of mastication and bruxism was collected by questionnaire. Data variables were analyzed by means of univariate and multivariate logistic regression. Odds ratios and the respective 95% confidence intervals were calculated (p&lt;0.05).

Results:

The presence of NCCLs was significantly more likely in subjects with protrusive interferences (odds ratio [OR]=1.82); with lateral interferences, especially on the nonworking side (OR= 1.77); or who were self-reported bruxists (OR=1.72). In the multivariate analysis, protrusive interferences, bruxism, age, and the presence of attrition were risk factors for the development of NCCLs. These factors resulted in a model with an area under the receiver-operating characteristic curve of 0.667 and a positive predictive value of 61.43%.

Conclusions:

There was no significant relationship between most occlusal factors and the presence of NCCLs. Only bruxism, protrusive interferences, age, and occlusal wear were risk factors. The predictive model was not sufficiently explanatory. Occlusal factors alone do not appear to be sufficient to explain the presence of NCCLs.

Non-carious cervical lesions and risk factors: A case-control study

OBJECTIVES

To evaluate whether the presence of non-carious cervical lesions (NCCLs) was related to the considered risk factors and to show the corresponding odds ratio in a predictive model.

METHODS

The sample was 280 dentistry students. In an initial clinical examination, 140 cases were selected that presented one or more teeth with non-carious cervical wear. For each case, a similar sex and age control without any tooth with non-carious cervical lesions was selected. An occlusal examination and periodontal probing were performed in all cases and controls by skilled dentists. All the subjects answered a questionnaire referring to factors of brushing, bruxism, preferred chewing side, consumption of extrinsic acids and the presence of intrinsic acids. Data were analysed by means of univariate and multivariate logistic regression.

RESULTS

Of all the study variables, only the protrusion interferences, interferences on the non-working side, the brushing force, CPITN value and the consumption of salads increase the risk of NCCLs in the univariate regression. The best predictive model was formed by the combination of CPITN variables >1, the consumption of acidic salads, self-reported bruxism, brushing force and attrition. However, it only correctly classifies 68.75% of subjects.

CONCLUSIONS

This study supports the multifactorial aetiology of NCCLs, the combination of several factors being necessary to explain their presence. The risk factors that make up the predictive model are not sufficient to explain the appearance of NCCLs. Dentists should take into account all these risk factors in prevention, diagnosis and treatment.

Wear measurement of dental tissues and materials in clinical studies: A systematic review

OBJECTIVES

This study aims to systematically review the different methods used for wear measurement of dental tissues and materials in clinical studies, their relevance and reliability in terms of accuracy and precision, and the performance of the different steps of the workflow taken independently.

METHODS

An exhaustive search of clinical studies related to wear of dental tissues and materials reporting a quantitative measurement method was conducted. MedLine, Embase, Scopus, Cochrane Library and Web of Science databases were used. Prospective studies, pilot studies and case series (>10 patients), as long as they contained a description of wear measurement methodology. Only studies published after 1995 were considered.

RESULTS

After duplicates' removal, 495 studies were identified, and 41 remained for quantitative analysis. Thirty-four described wear-measurement protocols, using digital profilometry and superimposition, whereas 7 used alternative protocols. A specific form was designed to analyze the risk of bias. The methods were described in terms of material analyzed; study design; device used for surface acquisition; matching software details and settings; type of analysis (vertical height-loss measurement vs volume loss measurement); type of area investigated (entire occlusal area or selective areas); and results.

SINIFICANCE

There is a need of standardization of clinical wear measurement. Current methods exhibit accuracy, which is not sufficient to monitor wear of restorative materials and tooth tissues. Their performance could be improved, notably limiting the use of replicas, using standardized calibration procedures and positive controls, optimizing the settings of scanners and matching softwares, and taking into account unusable data.

Etiological Aspects of Noncarious Dental Lesions

PURPOSE

The aim of the present study was to correlate etiological factors with noncarious cervical lesions in a group of patients from Craiova.

MATERIAL AND METHODS

The study was conducted between November 2015 and May 2016 on 50 patients, aged 18-56 years, who addressed to the Oral Rehabilitation Clinic, from the University of Medicine and Pharmacy of Craiova. Patients were divided into two groups: the study group consists of patients who had noncarious cervical dental lesions (NCCLs) and the control group with patients who did not have noncarious cervical lesions. Each patient underwent a clinical examination and completed a questionnaire, referring to eating habits, oral hygiene, vicious habits and personal impressions about the appearance and functionality of his teeth, highlighting the factors involved in the noncarious dental lesions etiology.

RESULTS

The study group consisted of 64% women and 36% men. Noncarious cervical lesions were higher in men (72.22%) compared to women (56.25%). Regarding on the tooth brushing method, it has been noted that 34% of patients used a vertical tooth brushing method, 52% were using a circular brushing method, while 14% were practicing a horizontal tooth brushing method. Cervical sensitivity has been detected in 48% of the patients, against 52% who showed no sensitivity. 62% of the participants did not have bruxism, while nighttime/daytime bruxism was found in 38% of the patients.

CONCLUSIONS

There are several etiological factors correlated with noncarious cervical lesions, among which are: tooth brushing method, bruxism, eating behaviors.

A pilot study to assess the morphology and progression of non-carious cervical lesions

OBJECTIVE

This longitudinal pilot study aimed to morphologically and quantitatively investigate the progress of non-carious cervical lesions (NCCLs) by using swept-source optical coherence tomography (SS-OCT).

METHODS

The samples examined comprised sets of NCCL epoxy resin replicas obtained from 10 lesions in 6 patients who attended annual dental visits over 4 or 5 years. SS-OCT images of the replicas were analyzed in terms of the maximum depth (D_max) and corresponding vertical width (VW) - using an image analyzer to estimate progression of the NCCLs over time.

RESULTS

It was found that differences between wedge- and saucer-shaped lesions were morphologically distinguished well by the OCT images. There were significant differences in dimensions among D_max, VW and horizontal width (HW). HW was the largest and D_max was the smallest. Although no significant differences in absolute values of annual progression rates were found among D_max, VW and HW, the percentage increase in D_max was significantly greater compared to VW and HW. The ratios of D_max to corresponding VW ranged from 0.49 to 1.01 for the wedge-shaped lesions and from 0.13 to 0.44 for saucer-shaped lesions, respectively.

CONCLUSIONS

The dimensional analysis demonstrated notable progression with large variations. The wedge-shaped lesions appeared to show greater D_max values compared to the saucer-shaped lesions.

CLINICAL SIGNIFICANCE

With respect to the depth, the wedge-shaped lesions may progress at a greater rate compared to the saucer-shaped lesions.

Abfraction lesions: etiology, diagnosis, and treatment options

Abfraction is a type of noncarious cervical lesion (NCCL) characterized by loss of tooth tissues with different clinical appearances. Evidence supports that abfraction lesions, as any NCCLs, have a multifactorial etiology. Particularly, the cervical wear of abfraction can occur as a result of normal and abnormal tooth function and may also be accompanied by pathological wear, such as abrasion and erosion. The interaction between chemical, biological, and behavioral factors is critical and helps to explain why some individuals exhibit more than one type of cervical wear mechanism than others. In an era of personalized dentistry, patient risk factors for NCCLs must be identified and addressed before any treatment is performed. Marked variations exist in dental practice concerning the diagnosis and management of these lesions. The lack of understanding about the prognosis of these lesions with or without intervention may be a major contributor to variations in dentists’ management decisions. This review focuses on the current knowledge and available treatment strategies for abfraction lesions. By recognizing that progressive changes in the cervical area of the tooth are part of a physiologically dynamic process that occurs with aging, premature and unnecessary intervention can be avoided. In cases of asymptomatic teeth, where tooth vitality and function are not compromised, abfraction lesions should be monitored for at least 6 months before any invasive procedure is planned. In cases of abfraction associated with gingival recession, a combined restorative-surgical approach may be performed. Restorative intervention and occlusal adjustment are not indicated as treatment options to prevent further tooth loss or progression of abfraction. The clinical decision to restore abfraction lesions may be based on the need to replace form and function or to relieve hypersensitivity of severely compromised teeth or for esthetic reasons.

Factors influencing the progression of noncarious cervical lesions: A 5-year prospective clinical evaluation

STATEMENT OF PROBLEM

The etiology (chemical, friction, abfraction) of noncarious cervical lesion (NCCL) progression is poorly understood.

PURPOSE

The purpose of this 5-year prospective clinical trial was to measure the relationship between NCCLs and various etiologic factors.

MATERIAL AND METHODS

After review board approval, 29 participants with NCCLs were enrolled. Polyvinyl siloxane impressions were made of each NCCL, and casts were poured at baseline, 1, 2, and 5 years. The casts were scanned with a noncontact profilometer, and 1-, 2-, and 5-year scans were superimposed over baseline scans to measure volumetric change in NCCLs. T-scan and Fujifilm Prescale films were used to record relative and absolute occlusal forces on teeth with NCCLs at the 5-year recall. Participant diet, medical condition, toothbrushing, and adverse oral habit questionnaires were given at the 5-year recall. Occlusal analysis was completed on mounted casts to determine the presence of wear facets and group function. Volumetric lesion progression from 1 to 5 years was correlated to absolute and relative occlusal force using mixed model analysis. The Kruskall-Wallis and Mann-Whitney analyses compared lesion progression with diet, medical condition, toothbrushing, adverse oral habits, wear facets, and group function.

RESULTS

The NCCL progression rate over 5 years was 1.50 ±0.92 mm(3)/yr. The rate of progression of NCCLs was related to mean occlusal stress (P=.011) and relative occlusal force (P=.032) in maximum intercuspation position. No difference was seen in NCCL progression between participants with any other factors.

CONCLUSION

Heavy occlusal forces play a significant role in the progression of NCCLs.

Restorative material and loading type influence on the biomechanical behavior of wedge shaped cervical lesions

OBJECTIVES

To evaluate the influence of restorative materials used on the rehabilitation of MOD cavities and loading type, on biomechanical behavior of wedge-shaped (WS) lesions in endodontically treated maxillary premolars. The investigation was conducted by 3D finite element analysis (FEA) and strain gauge test.

MATERIALS AND METHODS

Six models were generated, with MOD cavities and endodontic treatment: A (MOD amalgam restoration), R (MOD composite restoration), AL (A + cervical lesion (L)), RL, ALR (A + cervical lesion restored with composite (LR)), and RLR. Each model underwent two compressive loading (100N): axial and oblique-45° angle to the long axis on the buccal cusp. The models were analyzed by von Mises criteria. For strain gauge test, 14 standardized maxillary premolars were treated according to the groups described for FEA. Two strain gauges were bonded on each sample submitted to compressive loading in a mechanical testing machine.

RESULTS

A presented higher stress concentration and strain values than R. Oblique loading promoted highest stress concentration and strain rates for all groups. ALR and RLR presented similar stress-strain distribution pattern when compared to A and R.

CONCLUSION

The interaction between MOD cavity restored with amalgam and oblique loading propitiated the highest stress concentration and strain values on cervical region and WS lesion.

CLINICAL RELEVANCE

The MOD cavity restored with composite resin is a better option than amalgam to improve the biomechanical behavior of wedge-shaped lesion, avoiding dental failure. In addition, the occlusal interferences must be removed, allowing homogeneous contact distribution and preventing WS lesion progression.

Clinical evaluation of the association between noncarious cervical lesions and occlusal forces

STATEMENT OF PROBLEM

Noncarious cervical lesions (NCCLs) are a frequent challenge in clinical dental practice, given the variety of opinions regarding their etiology, diagnosis, and treatment.

PURPOSE

The purpose of this study was to assess the potential relationship between occlusal forces and the occurrence of NCCLs.

MATERIAL AND METHODS

The participant population consisted of 111 volunteers (30 male and 81 female, mean age 23.6 years). General personal information was recorded, after which participants were examined for the presence and location of NCCLs, gingival recession, fracture lines, dental and restoration fractures, presence and location of tooth wear, type of occlusal guidance scheme for lateral mandibular movements, and existence of occlusal interference or premature contacts. The participants were divided according to the presence or absence of NCCLs, and data were statistically analyzed with the Independent t test, the Chi-square test, and the Fisher exact test (α=.05).

RESULTS

A significant association was found between the presence of NCCLs and age (P=.008), gingival recession (P<.001), occlusal trauma (P<.001), presence (P<.001) and location of tooth wear, and group function as occlusal guidance scheme in lateral excursive movements (P<.001).

CONCLUSIONS

A strong relationship between the presence of NCCLs and occlusal overload was found.

Scaffold-free microtissues: differences from monolayer cultures and their potential in bone tissue engineering

OBJECTIVES

Cell-based therapies for bone augmentation after tooth loss and for the treatment of periodontal defects improve healing defects. Usually, osteogenic cells or stem cells are cultivated in 2D primary cultures, before they are combined with scaffold materials, even though this means a loss of the endogenous 3D microenvironment for the cells. Moreover, the use of single-cell suspensions for the inoculation of scaffolds or for the direct application into an area of interest has the disadvantages of low initial cell numbers and susceptibility to unwanted cellular distribution, respectively.

MATERIALS AND METHODS

We addressed the question whether an alternative to monolayer cultures, namely 3D microtissues, has the potential to improve osteogenic tissue engineering and its clinical outcome.

RESULTS

By contrast, to monolayer cultures, osteogenic differentiation of 3D microtissues is enhanced by mimicking in vivo conditions. It seems that the osteogenic differentiation in microtissues is enhanced by strong integrin-extracellular matrix interaction and by stronger autocrine BMP2 signaling. Moreover, microtissues are less prone to wash out by body fluids and allow the precise administration of large cell numbers.

CONCLUSION

Microtissue cultures have closer characteristics with cells in vivo and their enhanced osteogenic differentiation makes scaffold-free microtissues a promising concept in osteogenic tissue engineering.

CLINICAL RELEVANCE

Microtissues are particularly suitable for tissue engineering because they improve seeding efficiency of biomaterials by increasing the cell load of a scaffold. This results in accelerated osteogenic tissue formation and could contribute to earlier implant stability in mandibular bone augmentation.

Scaffold-free microtissues: differences from monolayer cultures and their potential in bone tissue engineering

Objectives

The paper’s aim is to review dentin hypersensitivity (DHS), discussing pain mechanisms and aetiology.

Materials and methods

Literature was reviewed using search engines with MESH terms, DH pain mechanisms and aetiology (including abrasion, erosion and periodontal disease).

Results

The many hypotheses proposed for DHS attest to our lack of knowledge in understanding neurophysiologic mechanisms, the most widely accepted being the hydrodynamic theory. Dentin tubules must be patent from the oral environment to the pulp. Dentin exposure, usually at the cervical margin, is due to a variety of processes involving gingival recession or loss of enamel, predisposing factors being periodontal disease and treatment, limited alveolar bone, thin biotype, erosion and abrasion.

Conclusions

The current pain mechanism of DHS is thought to be the hydrodynamic theory. The initiation and progression of DHS are influenced by characteristics of the teeth and periodontium as well as the oral environment and external influences. Risk factors are numerous often acting synergistically and always influenced by individual susceptibility.

Clinical relevance

Whilst the pain mechanism of DHS is not well understood, clinicians need to be mindful of the aetiology and risk factors in order to manage patients’ pain and expectations and prevent further dentin exposure with subsequent sensitivity.

Non-carious cervical lesions and occlusion: a systematic review of clinical studies

Non-carious cervical lesions (NCCLs) are a group of lesions that affect the cervical area of the teeth. Different aetiological factors have been reported, among them tooth brushing force, erosive agents and occlusal forces. The aim of this study was to ascertain, by means of a systematic review, the association between NCCLs and occlusion. A search was performed in the MEDLINE database, retrieving a total of 286 articles. After title and abstract screening, the clinical investigations were read in full to select those that evaluated the occlusal aspects of NCCL aetiology. This systematic review describes the results of three prospective and 25 cross-sectional studies. As there is an extreme heterogeneity in design, diagnostic criteria, forms of analysis and associated factors, a meta-analysis was not possible. The wide variety of classification and diagnostic criteria reflects a high range of reported prevalence. An extensive heterogeneity of independent variables was noted, even in occlusal analysis, which helps to mask any conclusion about the role of occlusion in NCCL aetiology. The literature reveals that studies on this topic are subject to a substantial amount of bias, such as evaluation (use of non-blinded examiners) and confounding bias (no control of others aetiological factors). Up to now, it has been impossible to associate NCCLs with any specific causal agent, and the role of occlusion in the pathogenesis of non-carious cervical lesions seems as yet undetermined. Therefore, additional studies, properly designed to diminish bias, are warranted.

Restoration of noncarious cervical lesions: when, why, and how

At this time, restoration of noncarious cervical lesions (NCCLs) is a common occurrence in clinics nowadays. Some reasons for this are the growth of the elderly population, a smaller rate of tooth loss, and possibly the increase of some etiologic factors. These factors include inadequate brushing techniques in gingival recession cases, corrosive food and drink consumption, and occlusal stress concentrating factors (occlusal interferences, premature contacts, habits of bruxism, and clenching). Unfortunately, Class V restorations also represent one of the less durable types of restorations and have a high index of loss of retention, marginal excess, and secondary caries. Some causes for these problems include difficulties in isolation, insertion, contouring, and finishing and polishing procedures. This work aims to help dentists in choosing the best treatment strategy, which necessarily involves steps of problem identification, diagnosis, etiological factor removal or treatment, and, if necessary, restoration. Finally, appropriate restorative techniques are suggested for each situation.

Osteoimmunopathology in HIV/AIDS: A Translational Evidence-Based Perspective

Infection with the human immunodeficiency virus-1 (HIV) and the resulting acquired immune deficiency syndrome (AIDS) alter not only cellular immune regulation but also the bone metabolism. Since cellular immunity and bone metabolism are intimately intertwined in the osteoimmune network, it is to be expected that bone metabolism is also affected in patients with HIV/AIDS. The concerted evidence points convincingly toward impaired activity of osteoblasts and increased activity of osteoclasts in patients with HIV/AIDS, leading to a significant increase in the prevalence of osteoporosis. Research attributes these outcomes in part at least to the ART, PI, and HAART therapies endured by these patients. We review and discuss these lines of evidence from the perspective of translational clinically relevant complex systematic reviews for comparative effectiveness analysis and evidence-based intervention on a global scale.

Alternative technique for class V resin composite restorations with minimum finishing/polishing procedures

Class V restorations are a very common occurrence in clinics. Some reasons include an increase in non-carious cervical lesions (NCCL), root caries and the elderly population. Unfortunately, Class V restorations also represent one of the less durable types of restorations and have a high index of loss of retention, marginal excess and secondary caries. Some causes for these problems include difficulties in isolation, insertion, contouring, finishing and polishing procedures. This technique demonstrates an alternative isolation and insertion method using photocured gingival barrier in association with a flowable resin and hybrid resin composite to recreate the gingival wall with minimum or no excess.