Bond strength of newer dentin bonding agents in different clinical situations

Comparative Evaluation of Retention of Fiber Posts in Different Dentin Regions Using Various Bonding Techniques: An In Vitro Study

Aim This study aims to evaluate the retention of fiber posts in the coronal, middle, and apical dentin regions with various bonding techniques by using fifth, sixth, and eighth-generation bonding agents and self-etch adhesive cement. Materials and methods For this study, 96 freshly extracted human incisors with straight roots were selected. Endodontic treatment of the specimens was performed. The post spaces were created immediately after obturation and the posts were luted with three different bonding agents and self-adhesive resin cement and the specimens were divided into four groups. Approximately 3 mm thick sections were made from different dentin regions of the post space and were tested for three subgroups: Subgroup I: Coronal, Subgroup II: Middle, Subgroup III: Apical. The specimens were tested on a universal testing machine. Results Statistical analysis was done using one-way analysis of variance (ANOVA) and Tukey's post hoc test using SPSS software version 17.0 (SPSS Inc., Chicago ). The intra-group comparison showed that the bond strength was more in the fifth-generation bonding agent (Cervical- 8.2574± 1.49034, Middle- 11.4800± 2.59938, Apical- 14.7108±1.82931), followed by the sixth (Cervical- 9.102± 2.76119, Middle-9.3152±2.11585, Apical- 12.9478±4.69404) and eighth-generation bonding systems (Cervical- 9.0938±2.77537, Middle- 7.1585±1.97601, Apical- 9.3726±0.73720) and the self-etch adhesive dental resin cement (Cervical- 5.1004±2.17389, Middle- 4.1574±1.28664, Apical-7.8884±1.90078). The inter-group comparison showed that the bond strength was higher in the fifth-generation bonding agent followed by sixth-generation, eighth-generation, and self-adhesive resin cement. Conclusion The present study reveals that the highest push-out bond strengths were obtained in apical sections followed by the middle and cervical areas. The bond strength was higher when using the fifth-generation bonding agent followed by the sixth, eighth, and self-adhesive resin cement. Despite many advancements, the fifth-generation bonding agent still showed superior retention in different dentin regions among various other bonding techniques.

Interaction of zirconium oxide nanoparticle infiltrated resin adhesive with dentin conditioned by phosphoric acid and Er, Cr: YSGG laser

The aim was to prepare experimental adhesive (EA) with ZrO₂ nanoparticles (ZEA) and without it; and its interaction with dentin conditioned with photodynamic therapy (PDT), etch and rinse, and Er, Cr: YSGG laser (ECL). Methods consisted of the scanning electron microscope (SEM), energy dispersive X-ray (EDX), shear bond strength (SBS) failure mode, and rheological property analysis. The methods were employed to assess bond integrity; the shape of ZrO₂ NPs and interfacial dentin and adhesive interaction. Ninety premolar teeth were collected and pre-bonding, conditioning of dentin was performed utilizing phosphoric acid (H3PO4), photodynamic therapy (PDT), and ER-CR-YSGG laser (ECL). The teeth were set to form bonded specimens using two adhesives EA and ZEA. The microscopic imagery of ZrO₂ revealed irregular-shaped, non-edged particles. EDX analysis revealed Zr to be 75.7% whereas, O2 by weight was 25.3%. The highest SBS was demonstrated in dentin conditioned with etch and rinse and ZEA (19.05 ± 0.13 MPa). Whereas, the lowest SBS was observed in dentin surface treated with PDT and EA (12.25 ± 0.14 MPa). Most of the reported failure modes were adhesive. Rheological analysis revealed that with increasing frequencies the viscosities of adhesives were reduced. The presence of 10% ZrO by weight in adhesive improves SBS of restoration and this improvement in bond values is statistically significant compared to EA. Bond values may be influenced by surface treatment of dentin.

Effect of Non-Thermal Atmospheric Plasma on Micro-Tensile Bond Strength at Adhesive/Dentin Interface: A Systematic Review

Objective: The objective of this review was to evaluate the effect of non-thermal atmospheric plasma (NTAP) on adhesives resin–dentin micro-tensile bond strength (μTBS) in previously published studies. Methods: Electronic search was conducted using the Medline, Cochrane library, and Scopus databases. The included studies were laboratory studies that investigated the effect of NTAP on adhesives μTBS to coronal dentin. Studies that evaluated the effect of NTAP on bond strength to indirect substrates, enamel or root dentin, were excluded. The methodological quality of included studies was assessed. Results: Thirteen studies were included in this systematic review. All the included studies were considered to have a medium risk of bias. NTAP significantly improved μTBS at 24 h or after short-term aging in five studies (38.5%) and both immediate and after long-term aging in 5 studies (38.5%). In two studies (15.4%), NTAP resulted in a short-term material-dependent effect that was not stable after long-term aging. Interestingly, in one study (7.7%), NTAP had a positive effect only in the etch-and-rinse (ER) mode after long-term aging. Conclusion: Within the limitations of this systematic review, NTAP application could enhance resin–dentin μTBS of ER adhesives or universal adhesives (UAs) applied in the ER mode. In the ER mode, the rewetting step after NTAP seems to be unnecessary. Because of the limited information currently available in the literature, further studies are required to evaluate the effect of the NTAP application on self-etch (SE) adhesives or UAs applied in the SE mode.

Comparison of adhesive bond strength among fiber reinforced post and core with different cementation techniques: In vitro study

AIM

To investigate push-out bond strength (PBS) of fiber post to radicular dentin after using different cementation techniques.

MATERIAL AND METHODS

Sixty single-rooted premolars were disinfected and cleaned by mechanical instrumentation. S1, S2, and SX were used for canal shaping and finishing of the canal was carried out using F1 and F2. This was followed by constant irrigation and smear layer removal using 17%EDTA. The canal was dried filled with gutta-percha and canal space was prepared using a peso reamer. Based on cementation techniques, samples were randomly allocated into six groups. Group 1: One-step Monoblock MC; Group 2: One-step, Monoblock MC-NA (no adhesive) GFP; Group 3: One-step, RX-MC-Monoblock; Group 4: Two-step, RX-MC; Group 5: Two-step, RX-FZ; and Group 6: Two-step RX-FZ-custom post. All specimens were mounted in polyvinyl pipes using acrylic resin up to cement enamel junction. All specimens were mounted in a universal testing machine subjected to push-out forces at a speed of 0.5 mm/min. Five samples from each group were sputter-coated with 6 nm gold thickness for 300 s at 250 mA. The coated specimens were assessed under the scanning electron microscope (SEM). Analysis of variance (ANOVA) and Tukey Kramer multiple comparisons tests were performed to compare means among groups maintaining the level of significance at (p < 0.001).

RESULTS

The highest PBS was displayed in RX-MC-Monoblock (199.020 ± 21.432 MPa). Whereas, lowest PBS was found in Monoblock MC-NA (no adhesive)-GFP (76.440 ± 9.468 MPa). Among one-step groups, RX-MC Monoblock exhibited the highest PBS (199.020 ± 21.432 MPa) comparable to one-step Monoblock MC (134.28 ± 19.37 MPa) (p > 0.05). Similarly, among two-steps groups, two-step RX-MC demonstrated significantly higher PBS values than two-step RX-FZ (143.340 ± 23.68 MPa) and RX-FZ-custom post (86.90 ± 7.41 MPa) (p < 0.05).

CONCLUSION

One-step RX-MC-Monoblock technique using self-adhesive cement and core foundation composite resin material multicore flow when cured simultaneously exhibited the highest bond integrity of post retention compared to other cementation technique.

Bond strengths of three-step etch-and-rinse adhesives to silane contaminated dentin

This study aimed to evaluate the effect of silane coupling agent contamination on the microtensile bond strength (µTBS) of 3-step etch-and-rinse adhesives on dentin. Flat occlusal dentin surfaces were prepared and randomly divided into 8 groups (n=20) based on the tested adhesives; Scotchbond Multi-purpose or Optibond FL, with contamination of an experimental silane (2 vol% of 3-m ethacryloxypropyltrimethoxysilane at pH 4.5) before acid-etching, after-etching or after-priming; while the groups without silane contamination served as controls. µTBS data were analyzed by two-way ANOVA and Tukey's HSD tests at a significance level of 0.05. Additional specimens of contaminated dentin were used to analyze changes in the organic molecules by Fourier transform infrared spectroscopy (FTIR). Silane contamination before acid-etching did not significantly change µTBS (p>0.05), but contamination after-etching and after-priming significantly decreased µTBS of both adhesives (p<0.05). Silane contamination had an adverse effect on the dentin bond strength of 3-step etch-and-rinse adhesives especially after-priming.

Comparative evaluation of clinical performance of two self-etch adhesive systems with total-etch adhesive system in noncarious cervical lesions: An in vivo study

Background:

The growing demands for esthetic restorations have stimulated intensive research in the field of adhesive dentistry. Dental adhesive systems are used to promote adhesion between composite resins and dental structure. In the fundamental principles of adhesion, the primary mechanism contributing to the formation of adhesion is micromechanical bonding between the restoration and the tooth. The bond strength of self-etching adhesives to dentin was found to be almost equal to that of total-etch adhesives. The aim of the present prospective, double-blind, randomized controlled clinical trial was to evaluate and compare the clinical performance of two self-etch adhesive systems with total-etch adhesive system in noncarious cervical lesions (NCCLs).

Materials and Methods:

In each patient, three teeth were randomly assigned according to the adhesive system used to Group A (total-etch adhesive system), Group B (two-bottle self-etch adhesive system), and Group C (one-bottle self-etch adhesive system). The clinical efficacy of these adhesive systems was determined by evaluating the retention rate, marginal integrity, and postoperative sensitivity at the following three levels: baseline, 6 months, and 18 months by following the Modified USPHS criteria introduced by Vanherle et al.

Results:

In the present study, the retention rate at 18 month in Group A, Group B, and Group C of 96%, 92%, and 92% was observed, respectively. A marginal integrity at 18 months was 88%, 80%, and 84% for Group A, Group B, and Group C, respectively. Postoperative sensitivity at 18 months was 16%, 12%, and 12% for Group A, Group B, and Group C, respectively.

Conclusion:

The clinical performance of total-etch and self-etch adhesive systems in NCCLs did not differ significantly with regard to the evaluated parameters – retention, marginal integrity, and postoperative sensitivity.

Influence of salivary contamination on the dentin bond strength of two different seventh generation adhesive systems: In vitro study

AIM

To investigate the effect of salivary contamination on the bond strength of two different seventh generation adhesive systems.

MATERIALS AND METHODS

Sixty caries-free human premolars with flat dentin surfaces were randomly divided into six groups of 10 teeth each and bonding was done using seventh-generation bonding agents Adper Easy One (3M ESPE) and Xeno V (Dentsply). Following the bonding procedure, resin composite was bonded to the surfaces using a plastic mould. The prepared specimen with composite cylinders attached were placed in 37°C distilled water for 24 h and then subjected to shear bond strength (SBS) with 0 h universal testing machine and the data were subjected to one-way analysis of variance and unpaired t-test.

RESULTS

Statistical significant difference between the Groups I, II and III in which Adper Easy One was used and similarly for Groups IV, V, and VI in which Xeno V was used. When an intergroup comparison was made using unpaired t-test Group II and Group V showed the nonsignificant difference.

CONCLUSION

Salivary contamination significantly affects the SBS of both the seventh generation dentin bonding agents. However, 2-hydroxyethyl methacryate based adhesive has higher bond strength.

Catechol-Functionalized Synthetic Polymer as a Dental Adhesive to Contaminated Dentin Surface for a Composite Restoration

This study reports a synthetic polymer functionalized with catechol groups as dental adhesives. We hypothesize that a catechol-functionalized polymer functions as a dental adhesive for wet dentin surfaces, potentially eliminating the complications associated with saliva contamination. We prepared a random copolymer containing catechol and methoxyethyl groups in the side chains. The mechanical and adhesive properties of the polymer to dentin surface in the presence of water and salivary components were determined. It was found that the new polymer combined with an Fe(3+) additive improved bond strength of a commercial dental adhesive to artificial saliva contaminated dentin surface as compared to a control sample without the polymer. Histological analysis of the bonding structures showed no leakage pattern, probably due to the formation of Fe-catechol complexes, which reinforce the bonding structures. Cytotoxicity test showed that the polymers did not inhibit human gingival fibroblast cells proliferation. Results from this study suggest a potential to reduce failure of dental restorations due to saliva contamination using catechol-functionalized polymers as dental adhesives.

Effect of oxalic acid pre-treatment in restorations of non-carious cervical lesions: A randomized clinical trial

Context:

Non-carious cervical lesions are usually associated with dentin hypersensitivity. The use of oxalic acid in restorations of these lesions could be beneficial in relieving pain.

Aims:

To evaluate the use of oxalic acid in restorations of non-carious cervical lesions.

Settings and Design:

A randomized clinical trial.

Subjects and Methods:

One operator placed 90 restorations in 20 volunteers of both sexes, with at least two lesions to be restored with the techniques: Control — Restoration with total-etch technique and Experimental — Restoration with pretreatment with oxalic acid followed by application of adhesive system. The restorative adhesive system used was XP Bond/Durafill. The restorations were directly assessed by two independent examiners using a modified United States Public Health Service (USPHS) method at baseline, 6 and 12 months, taking into account the following criteria: Retention (R), marginal integrity (MI), marginal discoloration (MD), postoperative sensitivity (S), caries (C), and anatomic form (AF).

Statistical analysis used:

The data were statistically analyzed using the Fisher exact and McNemar tests. The level of significance was set at 5%.

Results:

After 1 year, the results of restorations clinically satisfactory obtained for the control and experimental group respectively were: R (97% / 89%), MI (100% / 100%), MD (100% / 100%), S (100% / 100%), C (100% / 100%), and AF (100% / 100%).

Conclusions:

The use of oxalic acid as an agent of dentin pretreatment did not influence the clinical performance of restorations in non-carious cervical lesions after 1 year.

Clinical evaluation of self-etch and total-etch adhesive systems in noncarious cervical lesions: a two-year report

OBJECTIVE

The purpose of this study was to compare the clinical performance of two self-etch dental adhesives with Single Bond Plus, a traditional one-bottle total-etch dental adhesive, for the restoration of noncarious cervical lesions.

MATERIALS AND METHODS

A total of 156 restorations were placed in noncarious cervical lesions with a minimum depth of 1.5 mm. Patients had no chronic periodontal disease and had normal salivary function. Each patient received restorations on three teeth, each bonded with either Adper Single Bond Plus, Adper Easy Bond, or Adper Scotchbond SE dental adhesive. All lesions were restored with Filtek Supreme Plus composite resin. All teeth were isolated with a rubber dam, received a short enamel bevel, and were cleaned with flour of pumice. The adhesives and resin composite were applied following the manufacturers' instructions. Restorations were clinically evaluated at baseline, six months, one year, and two years using modified US Public Health Service criteria.

RESULTS

Two-year retention was recorded as 97.3%, 90.5%, and 95.2%, for Single Bond Plus, Scotchbond SE, and Easy Bond, respectively. Statistical analysis did not show a significant difference (p>0.05) in clinical performance between any of the three adhesives after a period of two years.

Resin zirconia bonding promotion with some novel coupling agents

OBJECTIVES

To evaluate and compare three novel coupling agents: 2-hydroxyethyl methacrylate, itaconic acid and oleic acid to two silane coupling agents, one commercial silane product and 3-acryloxypropyltrimethoxysilane on the bond durability of resin composite to zirconia.

METHODS

Zirconia samples were silica-coated by air abrasion and each of the five coupling agents was then applied to give five test groups. Resin composite stubs were bonded onto the conditioned zirconia surfaces. The samples were stored: dry storage, 30 days in water and thermocycled to give a total of fifteen test groups. The shear bond strengths were determined using a universal testing machine and data analyzed by two-way ANOVA and Tukey HSD (p<0.05) with shear bond strength as dependent variable and storage condition and primers as independent variables. The bond formation of the five coupling agents to zirconia was examined by X-ray photoelectron spectroscopy (XPS).

RESULTS

Two-way ANOVA analysis showed that there was a significant difference for different primers (p<0.05) and different storage conditions (p<0.05) on the shear bond strength values measured. XPS analysis showed a shift in binding energy for O(1s) after priming with the five coupling agents which revealed different bond formations related to the functional groups of the coupling agents.

SIGNIFICANCE

The shear bond strength values measured for all coupling agents after water storage and thermocycling exceed the minimum shear bond strength value of 5MPa set by ISO. The silane coupling agent, 3-acryloxypropyltrimethoxysilane, showed the highest bond strength of the three storage conditions.