Randomized Clinical Trial to Evaluate MTA Indirect Pulp Capping in Deep Caries Lesions After 24-Months

Comparison of bioactive material failure rates in vital pulp treatment of permanent matured teeth - a systematic review and network meta-analysis

Mineral Trioxide Aggregate (MTA) is the gold standard for vital pulp treatment (VPT), but its superiority over novel calcium silicate-based cements in permanent teeth lacks systematic evidence. This study aimed to compare the efficacy of these materials in VPT through a network meta-analysis. A systematic search was conducted in MEDLINE, EMBASE, Cochrane Library, and Web of Science until January 20, 2024. The inclusion criteria were randomized controlled trials involving VPT with biomaterials and reversible or irreversible pulpitis diagnoses in mature permanent teeth. The primary outcome was the odds ratio (OR) of failure rates with 95% confidence intervals. In the 21 eligible trials, failure rates were significantly higher with calcium-hydroxide than MTA at six (OR 2.26 [1.52-3.36]), 12 (OR 2.53 [1.76-3.62]), and 24 months (OR 2.46 [1.60-3.79]). Failure rates for Totalfill at six (OR 1.19 [0.55-2.58]) and 12 months (OR 1.43 [0.71-2.92]), and Biodentine at six (OR 1.09 [0.66-1.78]), 12 (OR 1.21 [0.74-1.96]), and 24 months (OR 1.47 [0.81-2.68]) were not significantly different from MTA. The results were similar in the direct pulp capping subgroup, whereas, in the partial and full pulpotomy subgroup, there was not enough evidence to achieve significant differences. MTA, Biodentine, and Totalfill are the most efficient materials for VPT. However, calcium-hydroxide-based materials are not recommended in VPT.

Treatment outcome of coronal pulpotomy and indirect pulp capping in mature permanent molars with symptoms of moderate pulpitis: A randomized clinical trial

Aim

This clinical trial aimed to compare the clinical success of coronal pulpotomy and indirect pulp capping (IPC) in managing symptomatic deep proximal caries in molars with moderate pulpitis over a 12-month period.

Materials and Methods

A total of 108 vital mature permanent molars with moderate pulpitis were randomly allocated to the IPC (n = 54) or coronal pulpotomy group (n = 54). Dycal and Biodentine were used as pulp-capping materials, followed by composite restoration. The absence of periapical infection and asymptomatic teeth that positively responded to the cold pulp sensitivity test (only in IPC) was considered posttreatment success at 12 months. Data from the study were analyzed using the Chi-square test and Kaplan-Meier survival analysis.

Results

There was a statistically significant difference between preoperative symptoms and the cold pulp sensibility test response (P = 0.000), indicating an association between symptoms and pulp sensibility. The average remaining dentine thickness (RDT) value was 0.48 ± 0.5 mm, with no statistically significant difference found between the location of caries and RDT (P = 0.084, P > 0.05). Compared to the IPC group, the pulpotomy group had a greater number of patients at 12 months after treatment that required no intervention. The Kaplan-Meier survival analysis revealed that the mean survival duration for pulpotomy was 48 weeks, and for IPC, it was 42.3 ± 2.35 weeks.

Conclusion

Coronal pulpotomy with Biodentine proved more effective in reducing symptoms, achieving radiographic success, and ensuring tooth survival compared to IPC with calcium hydroxide.

Clinical application of calcium silicate-based bioceramics in endodontics

Pulp treatment is extremely common in endodontics, with the main purpose of eliminating clinical symptoms and preserving tooth physiological function. However, the effect of dental pulp treatment is closely related to the methods and materials used in the process of treatment. Plenty of studies about calcium silicate-based bioceramics which are widely applied in various endodontic operations have been reported because of their significant biocompatibility and bioactivity. Although most of these materials have superior physical and chemical properties, the differences between them can also have an impact on the success rate of different clinical practices. Therefore, this review is focused on the applications of several common calcium silicate-based bioceramics, including Mineral trioxide aggregate (MTA), Biodentine, Bioaggregate, iRoot BP Plus in usual endodontic treatment, such as dental pulp capping, root perforation repair, regenerative endodontic procedures (REPs), apexification, root-end filling and root canal treatment (RCT). Besides, the efficacy of these bioceramics mentioned above in human trials is also compared, which aims to provide clinical guidance for their clinical application in endodontics.

The Understanding of Vital Pulp Therapy in Permanent Teeth: A New Perspective

The indications of vital pulp therapy (VPT) are expanding, which cases are suitable for VPT, and how to improve the success rate of VPT is a problem that often bothers us. The main purpose of VPT is to eliminate pulpitis by promoting the formation of reparative dentin or calcium bridge, so that it can continue to perform various physiological functions, and finally achieve the purpose of preserving pulp vitality and long-term preservation of affected teeth. Pulp capping and pulpotomy are the most common methods for VPT. The research field of VPT has attracted the attention of many scholars, who have studied it from many aspects (such as indications, material selection, operation requirements, and long-term prognosis). This article reviews the recent advances in the techniques of VPT in permanent teeth.

Present status and future directions: Hydraulic materials for endodontic use

BACKGROUND

Hydraulic materials are used in Endodontics due to their hydration characteristics namely the formation of calcium hydroxide when mixing with water and also because of their hydraulic properties. These materials are presented in various consistencies and delivery methods. They are composed primarily of tricalcium and dicalcium silicate, and also include a radiopacifier, additives and an aqueous or a non-aqueous vehicle. Only materials whose primary reaction is with water can be classified as hydraulic.

OBJECTIVES

Review of the classification of hydraulic materials by Camilleri and the literature pertaining to specific uses of hydraulic cements in endodontics namely intra-coronal, intra-radicular and extra-radicular. Review of the literature on the material properties linked to specific uses providing the current status of these materials after which future trends and gaps in knowledge could be identified.

METHODS

The literature was reviewed using PUBMED, and for each clinical use, the in vitro properties such as physical, chemical, biological and antimicrobial characteristics and clinical data were extracted and evaluated.

RESULTS

A large number of publications were retrieved for each clinical use and these were grouped depending on the property type being investigated.

CONCLUSIONS

The hydraulic cements have made a difference in clinical outcomes. The main shortcoming is the poor testing methodologies employed which provide very limited information and also inhibits adequate clinical translation. Furthermore, the clinical protocols need to be updated to enable the materials to be employed effectively.

The Effect of Calcium-Silicate Cements on Reparative Dentinogenesis Following Direct Pulp Capping on Animal Models

Dental pulp vitality is a desideratum for preserving the health and functionality of the tooth. In certain clinical situations that lead to pulp exposure, bioactive agents are used in direct pulp-capping procedures to stimulate the dentin-pulp complex and activate reparative dentinogenesis. Hydraulic calcium-silicate cements, derived from Portland cement, can induce the formation of a new dentin bridge at the interface between the biomaterial and the dental pulp. Odontoblasts are molecularly activated, and, if necessary, undifferentiated stem cells in the dental pulp can differentiate into odontoblasts. An extensive review of literature was conducted on MedLine/PubMed database to evaluate the histological outcomes of direct pulp capping with hydraulic calcium-silicate cements performed on animal models. Overall, irrespective of their physico-chemical properties and the molecular mechanisms involved in pulp healing, the effects of cements on tertiary dentin formation and pulp vitality preservation were positive. Histological examinations showed different degrees of dental pulp inflammatory response and complete/incomplete dentin bridge formation during the pulp healing process at different follow-up periods. Calcium silicate materials have the ability to induce reparative dentinogenesis when applied over exposed pulps, with different behaviors, as related to the animal model used, pulpal inflammatory responses, and quality of dentin bridges.

Dental Pulp Stem Cells on Implant Surface: An In Vitro Study

In the field of biology and medicine, one hears often about stem cells and their potential. The dental implant new surfaces, subjected to specific treatments, perform better and allow for quicker healing times and better clinical performance. The purpose of this study is to evaluate from a biological point of view the interaction and cytotoxicity between stem cells derived from dental pulp (DPSCs) and titanium surfaces. Through the creation of complex cells/implant, this study is aimed at analyzing the cytotoxicity of dental implant surfaces (Myth (Maipek Manufacturer Industrial Care, Naples, Italy)) and the adhesion capacity of cells on them and at considering the essential factors for implant healing such as osteoinduction and vasculogenesis. These parameters are pointed out through histology (3D cell culture), immunofluorescence, proliferation assays, scanning electron microscopy, and PCR investigations. The results of the dental implant surface and its interaction with the DPSCs are encouraging, obtaining results increasing the mineralization of the tissues. The knowledge of this type of interaction, highlighting its chemical and biological features, is certainly also an excellent starting point for the development of even more performing surfaces for having better healing in the oral surgical procedures related to dental implant positioning.

Clinical, radiographic, and histological evaluation of three different pulp-capping materials in indirect pulp treatment of primary teeth: a randomized clinical trial

OBJECTIVES

The aim of this randomized, controlled, three-arm parallel group, and double-blinded clinical trial was to evaluate the clinical, radiographic, and histopathological success of three different pulp-capping materials in one-stage indirect pulp treatment of primary teeth.

MATERIALS AND METHODS

The study included a total of 109 patients aged 5-9 years who had primary teeth with deep carious lesions and symptoms of reversible pulpitis. The teeth were divided into three groups according to the pulp-capping agents: (I) hard-setting calcium hydroxide (Dycal) (control group) (n = 36), (II) bioactive tricalcium silicate (Biodentine) (n = 37), and (III) resin-based tricalcium silicate (TheraCal LC) (n = 36). All the teeth were evaluated clinically and radiographically at 6, 12, 18, and 24 months postoperatively. A total of 23 primary mandibular second molars that were in their regular exfoliation period (24-40 months) were extracted and fixed in 10% formaldehyde solution. The specimens were evaluated histologically to assess the integrity of the odontoblastic layer, tertiary dentin formation quality of the dentin formed, severity of pulpitis, and other pulpal changes. Data were analyzed using Fisher's exact test, Pearson's chi-square test, and McNemar's test (p = 0.05).

RESULTS

At the end of the 24-month follow-up period, the clinical and radiographic success rates for Dycal, Biodentine, and TheraCal LC were 100%, 100%, and 93.3%, respectively, and there was no significant difference among the groups (p > 0.05). However, the TheraCal LC group was statistically unsuccessful when compared to the other groups with regard to the integrity of the odontoblastic layer, severity of pulpitis, and other pulpal changes in histological examination (p < 0.05).

CONCLUSION

Indirect pulp capping exhibited high clinical and radiographic success rates in the treatment of primary teeth regardless of the chosen pulp-capping agent. However, histological examination indicated that the pulp status was affected by the chosen capping material especially when selecting a resin-containing material such as TheraCal LC.

CLINICAL RELEVANCE

Resin-free calcium silicate-based materials appear to be more favorable in the indirect pulp treatment of primary teeth, particularly in young-age groups that require long-term success.

Mineral Trioxide Aggregate Applications in Endodontics: A Review

A current topic in dentistry concerns the biocompatibility of the materials, and in particular, conservative dentistry and endodontics ones. The mineral trioxide aggregate (MTA) is a dental material with biocompatibility properties to oral and dental tissues. MTA was developed for dental root repair in endodontic treatment and it is formulated from commercial Portland cement, combined with bismuth oxide powder for radiopacity. MTA is used for creating apical plugs during apexification, repairing root perforations during root canal therapy, treating internal root resorption, and pulp capping. The objective of this article is to investigate MTA features from a clinical point of view, even compared with other biomaterials. All the clinical data regarding this dental material will be evaluated in this review article. Data obtained from the analysis of the past 10 years' literature highlighted 19 articles in which the MTA clinical aspects could be recorded. The results obtained in this article are an important step to demonstrate the safety and predictability of oral rehabilitations with these biomaterials and to promote a line to improve their properties in the future.

Bioactive tri/dicalcium silicate cements for treatment of pulpal and periapical tissues

Over 2500 articles and 200 reviews have been published on the bioactive tri/dicalcium silicate dental materials. The indications have expanded since their introduction in the 1990s from endodontic restorative and pulpal treatments to endodontic sealing and obturation. Bioactive ceramics, based on tri/dicalcium silicate cements, are now an indispensable part of the contemporary dental armamentarium for specialists including endodontists, pediatric dentists, oral surgeons andfor general dentists. This review emphasizes research on how these materials have conformed to international standards for dental materials ranging from biocompatibility (ISO 7405) to conformance as root canal sealers (ISO 6876). Potential future developments of alternative hydraulic materials were included. This review provides accurate materials science information on these important materials. STATEMENT OF SIGNIFICANCE: The broadening indications and the proliferation of tri/dicalcium silicate-based products make this relatively new dental material important for all dentists and biomaterials scientists. Presenting the variations in compositions, properties, indications and clinical performance enable clinicians to choose the material most suitable for their cases. Researchers may expand their bioactive investigations to further validate and improve materials and outcomes.