The Thickness and Opacity of Aesthetic Materials Influence the Restoration of Discolored Teeth

Ceramic veneer shade evaluation using a multicolored 3D-printed model-A case report

OBJECTIVE

This article demonstrates the use of a multicolored 3D-printed model for laboratory shade evaluation of ceramic veneers.

CLINICAL CONSIDERATIONS

A young female patient presented with peg lateral incisors and diastemata between her maxillary incisors. Four ceramic veneers for her maxillary incisors were fabricated using a digital workflow. A multicolored 3D-printed model was manufactured using material jetting technology. The multicolored model and try-in pastes were used to evaluate and adjust the shade of the veneers. Clinically acceptable color matching was achieved, the veneers were delivered without further chairside shade adjustments.

CONCLUSIONS

Successful color evaluation and adjustment were achieved using the combination of multicolored 3D-printed model and try-in pastes. The use of this approach saved time for stump shade taking and fabrication of tooth-colored dies.

CLINICAL SIGNIFICANCE

A multicolored 3D-printed model can be a useful tool for color evaluation and adjustment of ceramic restorations.

Do different adhesives influence the color stability and fluorescence of composite restorations after aging?

This study aimed to evaluate the influence of dental adhesive color on the chromatic stability and fluorescence intensity of composite resin restorations of different thicknesses. Ninety bovine enamel samples were obtained and restored with resin composite varying thicknesses of restorative material and enamel (1.0 mm enamel and 1.0 mm composite; 1.5 mm enamel and 0.5 mm composite; 0.5 mm enamel and 1.5 mm composite). The restorations were made of composite resin (Opallis E-bleach H) using different types of dental adhesives: Ambar, Ambar APS, and Single Bond Universal (n=10). The samples were subjected to color measurement tests in a spectrophotometer using CIEDE2000 and fluorescence intensity measurements before and after aging in a red wine coloring solution. Data were subjected to analysis of variance (ANOVA) and Tukey's test (α = 0.05). There were no statistically significant changes in color stability or fluorescence intensity for restorations made of different materials or thicknesses (p>0.05). Single Bond Universal showed greater color stability at 0.5 mm thickness (ΔE00 = 4.4 ± 1.6) compared to other thicknesses of the same material (p=0.003), as well as a greater difference in fluorescence intensity after aging at 1.5 mm thickness (-414.9 ± 103.8) compared to other materials (p=0.0002). Overall, it was concluded that the different adhesive systems did not influence the color stability and fluorescence of restorations of different thicknesses.

Digital image analysis of fluorescence of ceramic veneers with different ceramic materials and resin cements

The objective of this study was to analyze the effect of the type of ceramics and resin cements on the fluorescence of ceramic veneers under the 405 nm UV-light by digital imaging. One hundred and ninety-two veneers were fabricated using three types of ceramics (IPS e.max CAD, IPS Empress CAD, and Zenostar). Eight pieces of substrates were made of resin-nano-ceramic (Lava Ultimate). The level of fluorescence for each sample cemented with the substrate using three kinds of resin cements (RelyX U200, Variolink N, and Choice 2) was analyzed by using histogram data of luminosity from Adobe Photoshop software. Furthermore, the fluorescence values were evaluated by two-way ANOVA and Tukey's test. The highest fluorescence values were observed for the IPS e.max CAD cemented with Choice 2 cement, followed by IPS Empress CAD, and Zenostar the lowest. The final fluorescence intensity of ceramic veneer is affected by ceramic materials and resin cements.

Masking Ability of Monolithic and Layered Zirconia Crowns on Discolored Substrates

There is scarce information on the colorimetric behavior of monolithic and layered zirconia crowns in combination with various abutment colors. This study evaluated the masking ability on discolored substrates of monolithic and layered zirconia crowns. Anterior crowns were fabricated using 3Y-TZP zirconia and layering ceramic and divided into three groups: monolithic (ML), bi-layer (BL), and tri-layer (TL). The crowns were placed over eleven substrates (ND1-ND9, zirconia, metal), and CIE L*, a*, b*, C*, and h° color coordinates were measured in the cervical, middle, and incisal areas with a spectrophotometer. Masking ability was calculated using the color difference formula, and values were interpreted according to the perceptibility and acceptability thresholds. Data were analyzed statistically (α = 0.001). The L* coordinate was not significantly different between BL and TL crowns, regardless of the measurement area or substrate (p ≥ 0.001). In the middle area, the L* coordinate of the ML group was statistically different from the BL and TL groups only for zirconia and metal substrates, while in the incisal area, only for ND7 and metal substrates. The a* coordinate was significantly different between the ML and layered crowns for all measurement areas and substrates (except zirconia). The b* and C* coordinates differed significantly between the groups only in the cervical area (p < 0.001). The ML crown had better masking ability than the BL and TL crowns. However, the color differences for ML crowns were below the acceptability threshold for ND2, ND3, and ND7 substrates in the cervical and middle areas and below perceptibility threshold only for the incisal area. The lowest masking ability of the crowns was found for ND9 and metal substrates in all measurement areas.