Megaprosthesis of the knee in tumor and revision surgery

Mechanical failure of distal femur mega prosthesis due to polyaryl-ether-ether-ketone (PEEK) hinge component

BACKGROUND

Polyaryl-ether-ether-ketone (PEEK) has gained popularity as a substrate for orthopaedic hardware due to its desirable properties such as heat and deformation resistance, low weight, and ease of manufacturing. However, we observed a relatively high failure rate of PEEK-based hinges in a distal femur reconstruction system. In this study, we aimed to evaluate the proportion of patients who experienced implant failure, analyse the mechanism of failure, and document the associated clinical findings.

METHODS

We conducted a retrospective cohort study, reviewing the medical charts of 56 patients who underwent distal femur resection and reconstruction with a PEEK Optima hinge-based prosthesis between 2004 and 2018. Concurrently, we performed a clinical and biomechanical failure analysis.

RESULTS

PEEK component failure occurred in 21 out of 56 patients (37.5%), with a mean time to failure of 63.2 months (range: 13-144 months, SD: 37.9). The survival distributions of PEEK hinges for males and females were significantly different (chi-square test, p-value = 0.005). Patient weight was also significantly associated with the hazard of failure (Wald's test statistic, p-value = 0.031).

DISCUSSION

Our findings suggest that PEEK hinge failure in a distal femur reconstruction system is correlated with patient weight and male gender. Retrieval analysis revealed that failure was related to fretting and microscopic fractures due to cyclic loading, leading to instability and mechanical failure of the PEEK component in full extension. Further assessment of PEEK-based weight bearing articulating components against metal is warranted.

Osseointegration reduces aseptic loosening of primary distal femoral implants in pediatric and adolescent osteosarcoma patients: a retrospective clinical and radiographic study

AIM

The challenge of distal femoral replacement (DFR) longevity remains a priority for orthopaedic oncologists as the overall survival and activity level of young patients with osteosarcoma continues to improve. This study hypothesized that increased extracortical osseointegration at the bone-implant shoulder (i.e., where the metal implant shaft abuts the femur) will improve stress transfer adjacent to the implant, as evidenced by reduced cortical bone loss, radiolucent line progression and implant failure in young patients (< 20 years) following DFR surgery.

METHODS

Twenty-nine patients of mean age 13.09 ± 0.56 years received a primary DFR. The clinical outcome of 11 CPS®, 10 GMRS®, 5 Stanmore® and 3 Repiphysis® implants was evaluated over a mean follow-up period of 4.25 ± 0.55 years. The osseous response to a bone-implant shoulder composed of either a hydroxyapatite-coated grooved ingrowth collar (Stanmore®), a porous metal coating (GMRS®) or a polished metal surface (Repiphysis®) was quantified radiographically.

RESULTS

All (100.0%) of the Stanmore® implants, 90.0% of GMRS®, 81.8% of CPS® and 33.3% of the Repiphysis® implants survived. Significantly increased extracortical bone and osseointegration were measured adjacent to the Stanmore® bone-implant shoulder when compared with the GMRS® and Repiphysis® implants (p < 0.0001 in both cases). Significantly decreased cortical loss was identified in the Stanmore® group (p = 0.005, GMRS® and p < 0.0001, Repiphysis®) and at 3 years, the progression of radiolucent lines adjacent to the intramedullarly stem was reduced when compared with the GMRS® and Repiphysis® implants (p = 0.012 and 0.026, respectively).

CONCLUSIONS

Implants designed to augment osseointegration at the bone-implant shoulder may be critical in reducing short- (≤ 2 years) to mid- (≤ 5 years) term aseptic loosening in this vulnerable DFR patient group. Further longer-term studies are required to confirm these preliminary findings.

The history of resection prosthesis

INTRODUCTION

The purpose of this historical review is to highlight the progression and development of prosthetic reconstruction with a focus on the modular distal femur with hinged total knee arthroplasty.

METHOD

Scientific literature was searched for descriptions of endoprosthetic reconstruction of the extremities to provide a thorough overview of the subject, focusing the research on the evolution of limb salvage of the distal femur.

RESULTS

After the first works of Gluck and Giordano, with ivory and metal and the pioneer shoulder prosthesis by Pean in the late 1890s, a great advancement was brought by reconstructions performed for injured soldiers of the Great War. By the 1940s, replacement of all the main joints had been attempted, and documented.

DISCUSSION

Walldius in the 1950s developed a fully constrained hinge knee, offering for the first time a consistent and replicable method of substituting the joint. In 1953, Shiers' prosthesis allowed for good flexion and extension. Stanmore and GUEPAR group prosthesis in the 1960s were the first to have a different right and left side model. The rotating hinge was developed in 1978 by Walker, with the innovative concept of six degrees of freedom. Between 1979 and 1982, Kotz developed the modular segmental replacement that, added to a fixed hinge knee, permitted the revolutionary creation of the modern distal femur replacement.

CONCLUSION

The study of the materials and mechanical solutions that was brought to the modern distal femur resection prosthesis is a good example of a virtuous multidisciplinary teamwork between orthopaedic surgeons, anatomists, and biomechanical engineers.

Salvage of limb salvage in oncological reconstructions of the lower limb with megaprosthesis: how much to push the boundaries?

INTRODUCTION

Megaprosthesis represent the most commonly used limb salvage method after musculoskeletal tumor resections. Nevertheless, they are burdened by high complication rate, requiring several surgical revisions and eventually limb amputation. The aims of this study were to evaluate the effect of rescuing the limb with subsequent revisions on complication rates (a), incidence of amputations (b), and whether complications reduce functional outcome after the first surgical revision (c).

MATERIALS AND METHODS

We retrospectively reviewed 444 lower limb megaprosthesis implanted for primary musculoskeletal tumors or metastatic lesions, from February 2000 to November 2017. 59 patients received at least one revision megaprosthesis surgery. MSTS score was used to assess final functional results. Complication-revision-amputation free survival rates were calculated both at 5 and 10 years of follow-up.

RESULTS

Complication free survival, revision free survival and amputation free survival at 10 years were 47% and 53%, 61% and 67%, 90% and 86% among all 444 patients and the group of 59 revised patients, respectively. The incidence of further complications after the first complication was 26% in the group treated with no subsequent revision surgeries and 51% in the group with at least one revision surgery. We found a trend of inverse linear relationship between the number of complications needing subsequent revision surgeries and the final MSTS.

CONCLUSION

The number of further revision surgeries after limb salvage with megaprosthesis increases the incidence of complications. Repeated surgical revisions, in particular after infection, increase the amputation rate. The most frequent causes of failure were structural failures and infections. MSTS score was superior for patients undergoing limb salvage than amputees. However, MSTS progressively decreased with multiple revisions becoming inferior to the functional score of an amputated patient.

Novel reconstruction method by mega-prosthesis wrapped with vancomycin-containing cement after resection of malignancies

To introduce wrapping vancomycin-containing cement around a mega-prosthesis (MP) as a novel method to prevent prosthetic joint infection after reconstruction surgery for malignant bone and soft tissue tumors. Five patients with malignant bone and soft tissue tumors treated at our hospital from April 2009 to December 2019 were included. The average age was 71.4 years. Four males and one female were included. Three patients had a bone tumor, and two had a soft tissue tumor. Three right thighs and two left femurs were affected. These tumors were identified histologically as undifferentiated pleomorphic sarcoma, spindle cell sarcoma, diffuse large cell B-cell lymphoma, metastasis of renal cancer, and metastasis of lung cancer. All patients underwent tumor resection and reconstruction with a MP. In all cases, vancomycin-containing cement (2 g/40 g) was wrapped around the implant at the extension. The average follow-up period was 30.4 months. We surveyed whether infection occurred after surgical treatment. We also investigated the Musculoskeletal Tumor Society score and clinical outcome. We observed no postoperative infection. One case of local recurrence was observed, and a hip dissection was performed. The Musculoskeletal Tumor Society score was 79.26 ± 1.26 (mean ± standard deviation) (range: 76-80.3). Three patients remained disease-free, one survived but with disease, and one died of disease. Wrapping vancomycin-containing cement around the MP may be a useful method of preventing postoperative joint infections.

Apparent trends in the use of femoral megaprostheses: an analysis from the National Joint Registry

BACKGROUND

Megaprosthetic replacement (MPR) of the femur is typically reserved for salvage or oncological reconstruction. Presently little is known about the provision of femoral MPRs performed nationally, the trends in indications for their use, and their outcomes beyond published unit-level data. Although the National Joint Registry (NJR) collects data as part of a mandatory arthroplasty audit process, MPR data entry on this platform is thought to be inconsistent. The aim of this study is to determine current trends for femoral MPR procedures as submitted to the NJR.

METHODS

Data for all procedures submitted to the NJR using the following implants were extracted: METS (Stanmore/Stryker), MUTARS (Implantcast), Segmental (Zimmer), GMRS (Stryker) and MEGA C (LINK). Pseudoanonymized data were analyzed through the NJR's research Data Access Portal and are reported using descriptive statistics.

RESULTS

A total of 1781 procedures were identified. Submitted cases increased for primary and revision hip and knee categories over the study period, although they plateaued in recent years. MPR implants were most commonly used in revision hip arthroplasty procedures. MPR use for the management of peri-prosthetic fractures has increased and now represents the most commonly reported indication for MPR use in both hip and knee revision categories. Few centers submitted large MPR case volumes (which were noted to be lower than published unit case series, indicating NJR under-reporting), and the vast majority of centers submitting MPR cases did so in low volume.

CONCLUSIONS

Due to the limitations identified, reported case volumes must be interpreted with caution. An MPR-specific NJR data entry form has been developed to allow more accurate and tailored reporting of MPR procedures, to support specialist service provision, and to provide meaningful data for future research.

Case Report: 3D-Printed Prosthesis for Limb Salvage and Joint Preservation After Tibial Sarcoma Resection

Introduction

Reconstruction of massive tibial defects in ankle joint-preserving surgery remains challenging though biological and prosthetic methods have been attempted. We surgically treated a patient with only 18-mm distal tibia remaining and reconstructed with a unique three-dimensional printed prosthesis.

Case Presentation, Intervention, and Outcomes

A 36-year-old male presented to our clinic with complaints of gradually swelling left calf and palpable painless mass for five months. Imageological exam indicated a lesion spanning the entire length of the tibia and surrounding the vascular plexus. Diagnosis of chondrosarcoma was confirmed by biopsy. Amputation was initially recommended but rejected, thus a novel one-step limb-salvage procedure was performed. After en-bloc tumor resection and blood supply rebuilding, a customized, three-dimensional printed prosthesis with porous interface was fixed that connected the tumor knee prosthesis and distal ultra-small bone segment. During a 16-month follow-up, no soft tissue or prosthesis-related complications occurred. The patient was alive with no sign of recurrence or metastasis. Walking ability and full tibiotalar range of motion were preserved.

Conclusions

Custom-made, three-dimensional printed prosthesis manifested excellent mechanical stability during the follow-up in this joint-preserving surgery. Further investigation of the durability and rate of long-term complications is needed to introduce to routine clinical practice.

Mid-term implant survival, functional and radiological results and mechanical complications of mega-prosthetic reconstruction around the knee with the PENTA® system

AIM

Mega-prosthetic reconstruction is the most common treatment method for massive osteoarticular defects caused by tumor resection around the knee. The new implant is a highly modular rotational-hinged megaprosthesis system with a distinct pentagonal stem geometry and variable implantation options. The aim of this study is to present the mid-term implant survival characteristics, functional and radiological results and mechanical complication profile of the new megaprosthesis.

METHODS

One hundred and one mega-prosthetic knee reconstruction procedures in 90 patients (M/F: 51/39) utilizing the new implant system were retrospectively analyzed. In 68 patients, the megaprosthesis was used for primary reconstruction following tumor resection while it was used for revision of other implants in 22. The mean age was 28.5 (7-66) years and the mean follow-up was 59.2 (24-124) months. The most common primary pathology was osteosarcoma with 63-70% patients, the most common anatomical site of involvement was the distal femur with 56-62% patients.

RESULTS

Henderson Type 2 failure (aseptic loosening) was seen in only 2-2.2% patients while Type 3 (structural failure) was seen in 29-32.2% Although the 5-year anchorage survival rate was 94.3%, overall mechanical implant survival was 76.1% at 5 years due to a relatively high failure rate in the first-generation hinge mechanism of the implant. The 5-year hinge survival rate demonstrated a significant improvement rate from 61.7% to 87.2% between the first and second generations of the implant (p = 0.027). The mean MSTS score was 24 out of 30 (14-29). The mean cumulative ISOLS radiographic score for index megaprosthesis operations was 19.7 (12-24), which corresponded to excellent outcome.

CONCLUSION

The new megaprosthesis system is a reliable choice for the reconstruction of tumor-related massive osteoarticular defects around the knee. Although long-term follow-up is necessary for a definitive evaluation of the implant's survival characteristics, midterm follow-up yields exceptional anchorage properties related to pentagonal stem geometry with very good functional outcomes.

A prospective study on outcome of patient-specific cones in revision knee arthroplasty

BACKGROUND

Cones are known to be good substitutes for metaphyseal and diaphyseal bone loss during revision total knee arthroplasty (RTKA). Often the off-the-shelf cones do not fit to the individual patient's anatomy. New 3D-printing additive technologies allow to develop patient-specific cones. The aim of this prospective study was to describe their outcome.

METHODS

From 2017 until 2020, 35 patient-specific titanium cones (15 femoral and 20 tibial) were implanted during 31 RTKAs (45% varus-valgus constrained implants and 55% rotating hinges). Clinical outcome was evaluated using KSS, WOMAC and FJS-12 scoring systems at 12 and 24 months. No patients were lost for follow-up.

RESULTS

In all cases, there were no technical difficulties in adapting the cones to both the host bone and the revision implant. By the time of performing data analysis (January 2021), none of the 31 patients needed revision surgery for any reason. At 12 months of follow-up, the mean values of scores for knee function improved significantly from baseline (p < 0.01): KSS-103.00 (min 100-max 111, SD 5.35), WOMAC-16.5 (min 9-max 24, SD 6.45), FJS-12-61.60 (min 52-max 76, SD 9.20). At 24 months, the trend towards improvement of functional results continued but did not reached statistical significance comparing to 12 months: KSS was 105.92 (min 95-max 155, SD 16.18), WOMAC-14.07 (min 0-max 42, SD 12.42), FJS-12-83.78 (min 65-max 97, SD 09.64). Radiographic signs of osteointegration were detected within the first 6 month after surgery in all cases. Loosening of femoral or tibial components as well as peri-prosthetic infection was not observed in any of the patients during the follow-up.

CONCLUSION

The original additive technology for designing and producing patient-specific metaphyseal and diaphyseal cones with different porosity zones for extensive femoral and tibial bone defects in RTKA is precise and clinically effective solution, at least in the short term. It could be a valid alternative to "off-the-shelf" cones or sleeves as well as structural allografts and even mega-prosthesis, but a longer follow-up period is required to assess its medium- and long-term reliability.

Quantitative measurements of adaptive bone remodeling around the cemented Zimmer® segmental stem after tumor resection arthroplasty using dual-energy x-ray absorptiometry

Background

Limb salvage surgery (LSS) is the preferred method for treatment of patients with sarcomas and to a greater extent also to patients with metastatic bone disease. The aim of the present study was to evaluate the adaptive remodeling of the periprosthetic cortical bone after insertion of a tumor prosthesis with cemented stem.

Methods

A prospective study of 21 patients (F/M = 12/9), mean age 55 years (range 15–81) with metastatic bone disease (n = 9), sarcomas (n = 8) or aggressive benign tumors (n = 4) who underwent bone resection due to a tumor, and reconstruction with a tumor-prosthesis (Zimmer® Segmental 130 mm straight fluted cemented stem with trabecular metal (TM) collars) in the proximal femur (n = 10), distal femur (n = 9) or proximal tibia (n = 2). Measurements of bone mineral density (BMD) (g/cm²) were done postoperatively and after 3, 6, and 12 months using dual-energy X-ray absorptiometry. BMD was measured in 4 regions of interest around the cemented stem and in one region of interest 1 cm proximal from the ankle joint of the affected limb and measurement of the contralateral ankle was used as reference. Repeated measures ANOVA and students paired t-test was used to evaluate BMD changes over time.

Results

At 1-year follow-up, BMD decreased compared to baseline in all four regions of interest with a statistically significant bone loss of 8–15%. The bone loss was most pronounced (14–15%) in the 2 regions of interest closest to the trabecular metal (TM) collar and lowest (8%) adjacent to the tip of the stem.

Conclusion

After 1 year the decrease in bone mineral density of the ankle on the affected limb was 9% and the contralateral ankle was close to baseline, thus suggesting that the periprosthetic bone mineral density changes during follow-up, mainly are caused by stress shielding and immobilization.

Trial registration

The study was approved by the Scientific Ethical Committee of the Capital Region of Denmark (J. No. H-2-2014-105) and the Danish Data Protection Agency (J. No.:2012–58-00004).

A New Proximal Femur Reconstruction Technique after Bone Tumor Resection in a Very Small Patient: An Exemplificative Case

For patients too young to be fitted with an expandable prosthesis, limb salvage surgery requires other strategies. The main problems are related to the impossibility of implanting an expandable prosthesis to the residual bone growth that is much too big in relation to the bone size, with the precocious implant loosening and/or the residual absence of bone growth, as well as the problem of limb length and shape difference. In this paper, we report a possible reconstruction solution using a composite prosthesis for an Ewing’s sarcoma of the proximal femur in an infant patient. After resection, a femoral stem was cemented into the distal third of a homoplastic humerus; a carbon fiber plate was used to stabilize the bone/homograft interface. At the one-year follow-up, the patient was free of disease and able to walk with only a slight limp. This case report describes a possible solution for very small patients. An adult humerus is of the right size to replace a child’s lower limb segments, and the distal humerus can be shaped, maintaining a cortex stiff enough to support a prosthesis. Very young patients might obtain a faster osteointegration of the graft than adults, due to their higher biological activity and, in this case, the diapasonal shape of the allograft might also have contributed to accelerated fusion. Moreover, the use of a graft to fit the prosthesis avoids loosening issues due to canal widening, hypothetically providing more growing time before system failure and revision surgery. However, although this technique is promising, further studies are necessary to confirm our findings and to verify if this procedure allows easier future prosthesis implantation.

Hospital Resource Utilization Associated With Endoprosthetic Reconstruction Versus Primary Arthroplasty

Endoprosthetic reconstructions of the hip and knee are currently reimbursed as primary hip and knee arthroplasty according to Current Procedural Terminology (CPT) coding guidelines. The purpose of this study was to compare hospital resources consumed by patients undergoing endoprosthetic reconstruction with those consumed by patients undergoing primary arthroplasty. The authors' hypothesis was that the former group carries more comorbidities, experiences longer length of stay (LOS), and has greater resource consumption. A retrospective review was performed of 61 patients undergoing endoprosthetic reconstruction and 745 patients undergoing primary hip or knee arthroplasty between 2015 and 2018 at a single institution. Demographic, clinical, and financial data were compared. The Charlson Comorbidity Index (CCI) was used to measure patients' health status and identify comorbidities associated with prolonged LOS through linear regression analysis. Patients who underwent endoprosthetic reconstruction had a greater than 3.5 times average LOS compared with primary arthroplasty patients: 10.81 days vs 2.94 days (P<.01). They demonstrated a higher mean CCI, higher rates of malignancy and pulmonary disease, and a wider age range. Their mean cost of care totaled $73,730.29, compared with $24,940.84 imposed by primary arthroplasty patients (P<.01). Significant predictors of LOS were malignancy status (metastatic or localized) and age younger than 50 years, with increased LOS being associated with increased cost. Patients undergoing endoprosthetic reconstruction of the hip and knee represent a fundamentally different patient population than primary arthroplasty patients based on comorbidities, variability in health status, and surgical indications. They have higher comorbidity scores and longer hospitalizations and consume more financial resources than primary arthroplasty patients. [Orthopedics. 2021;44(1):e73-e79.].

One-Stage Soft Tissue Reconstruction Following Sarcoma Excision: A Personalized Multidisciplinary Approach Called "Orthoplasty"

Background and Objectives. Wide surgical resection is a relevant factor for local control in sarcomas. Plastic surgery is mandatory in demanding reconstructions. We analyzed patients treated by a multidisciplinary team to evaluate indications and surgical approaches, complications and therapeutic/functional outcomes. Methods. We analyzed 161 patients (86 males (53%), mean age 56 years) from 2006 to 2017. Patients were treated for their primary tumor (120, 75.5%) or after unplanned excision/recurrence (41, 25.5%). Sites included lower limbs (36.6%), upper limbs (19.2%), head/neck (21.1%), trunk (14.9%) and pelvis (8.1%). Orthoplasty has been considered for flaps (54), skin grafts (42), wide excisions (40) and other procedures (25). Results. At a mean follow-up of 5.3 years (range 2–10.5), patients continuously showed no evidence of disease (NED) in 130 cases (80.7%), were alive with disease (AWD) in 10 cases (6.2%) and were dead with disease (DWD) in 21 cases (13.0%). Overall, 62 patients (38.5%) developed a complication (56 minor (90.3%) and 6 major (9.7%)). Flap loss occurred in 5/48 patients (10.4%). The mean Musculoskeletal Tumor Society (MSTS) and Toronto Extremity Salvage Score (TESS) was 74.8 ± 14 and 79.1 ± 13, respectively. Conclusions. Orthoplasty is a combined approach effective in management of sarcoma patients, maximizing adequate surgical resection, limb salvaging and functional recovery. One-stage reconstructions are technically feasible and are not associated with increased risk of complications.

What Opinions Do Tumor Reconstructive Surgeons Have about Sports Activity after Megaprosthetic Replacement in Hip and Knee? Results of the MoReSports Expert Opinion Online Survey

Sports activity has many benefits in cancer survivors. A key one is having sport activity contribute to the well-being of the individual. However, there are no guidelines about the intensity and kind of postoperative mobility workouts after hip or knee megaprosthetic treatment. Opinion research about sports after modular bone and joint replacement may provide an understanding of surgeons' attitudes on sports activity after megaprostheses of the hip and knee joint. A web survey with members of three international professional organizations of orthopedic tumor reconstructive surgeons was conducted between September 2016 and January 2018. Members were invited via personalized emails by the European Musculoskeletal Oncology Society (EMSOS), the International Society of Limb Salvage (ISOLS), and the Musculoskeletal Tumor Society (MSTS). The questionnaire included 26 questions. A total of 149 surgeons started the survey, and 76 finished the entire survey (American Association for Public Opinion Research (AAPOR) second response rate (RR2) EMSOS: 12.3%; ISOLS: 21.9%; MSTS: n/a). More than half of the respondents encourage sarcoma survivors after megaprosthetic treatment to reach an activity level that would allow them to regularly participate in active sporting events of University of California, Los Angeles (UCLA) activity level 7 and higher. Orthopedic tumor reconstructive surgeons do fear a number of complications (periprosthetic fracture, allograft failure/fracture, loosening, prosthetic or bearing failure, and early polyethylene wear) due to sports activity after modular bone-joint replacement, but they actually witness fewer complications than they conceptually anticipated. According to the surgeons' opinions, between four to seven types of sports after surgery could reasonably be recommended depending on the type of hip or knee procedures. This survey provides insights into opinions on what could be recommended, what could be allowed if surgeons and their patients agree on the potential negative outcome, and which sports should definitely not be allowed after hip and knee megaprostheses.

Analysis of principles inspiring design of three-dimensional-printed custom-made prostheses in two referral centres

BACKGROUND

Three-dimensional (3D) printing is an emerging technology used in numerous medical fields. Reconstruction of large bone defects after tumor resections or complex revision surgeries is challenging especially in specific sites where modular prostheses are not available. The possibility to realize custom-made 3D-printed prostheses improves their application in surgical field despite the complication rate, gaining a lot of attention for potential benefits.

OBJECTIVES

We asked: (1) What are the emerging indications and designs of 3D-printed prostheses for complex bone reconstructions? (2) What complications occur with the use of custom implants considering site?

STUDY DESIGN AND METHODS

We performed a retrospective analysis of every patient in whom a custom-made 3D-printed prosthesis was used to reconstruct a bone defect after resection for a bone tumour or challenging revision surgery from 2009 to 2018 in two referral centres. Forty-one patients (11 males [27%], 30 females [73%]) with a mean age of 41 years (range, 10-78 years) were included. Our general indications for using these implants were complex reconstructions of massive bone defects, in the absence of available modular prostheses. Seven were non-oncologic patients, whereas 24 patients were mainly treated for their malignant bone tumours. Custom-made 3D-printed prostheses were used in pelvis (29), forearm (6), scapula (2), distal tibia (2), calcaneus (1), and femoral diaphysis (1). The reconstruction included complete articular replacement in 24 cases (58%) whereas a combined spinopelvic implant has been used in two cases. Flaps were used in 25 cases (61%). Statistical analyses include Kaplan-Meier curves of survival.

RESULTS

The mean follow-up was 20 months. In the oncologic group, overall survival was 89% at five year follow-up and only three patients died of disease. Only one patient required implant removal due to deep infection. Overall major and minor complication rate was 22% (14 complications in 9/41 patients), mainly wound-related problems. One patient reported a periprosthetic fracture, one had hip dislocation, and four (12% [4/34 cases]) had local recurrence. Mean MSTS functional outcome score at follow-up was 73% (range, 23-100%), with a full weight bearing at an average time of 73 days from surgery of lower limbs.

CONCLUSIONS

Custom-made 3D-printed prostheses represent at today a promising reconstructive technique, maintaining however the correct indications for their use in musculoskeletal oncology and challenging revision surgery. Complication rate is acceptable, with infection and wound healing problems relatively common after complex pelvic reconstructions. We will continue to follow our patients over the longer term to ascertain the role of these implants; however, larger studies will need to confirm indications and control for prognostic factors.

Early Outcomes of Patient-Specific Modular Cones for Substitution of Methaphysial and Diaphysial Bone Defects in Revision Knee Arthroplasty

The aim of this study was the assessment of early outcomes of patient-specific three-dimensional titanium cones with specified porosity parameters to compensate for extensive metaphysical-diaphyseal bone defects in RTKA.

Materials and Methods. Since 2017 till 2019 30 patient-specific titanium cones (12 femoral and 18 tibial) implanted during 26 RTKAS. Clinical outcomes evaluated using KSS, WOMAC and fjS-12 scoring systems on average 10 (2–18) months after surgery. At the same time the stability of implant fixation analyzed using frontal, lateral and axial knee roentgenograms.

Results. During all procedures there were no technical difficulties in positioning and implantation of custom-made titanium cones. At the time of preparation of the publication, none of the patients had indications for further surgical intervention, as well as intra- and postoperative complications. Six months after surgery all scores improved significantly: KSS from 23 (2–42, SD 19.96) to 66.5 (62–78, SD 7.68), WOMAC from 59 (56–96, SD 28.31) to 32.25 (19–46, SD 11.76), the index FJS-12 was 29.16 points (0–68.75, SD 30.19). The average scores continued to improve up to 18 months: KSS — 97.5 (88–108, SD 9.14), WOMAC — 16.5 (9–24, SD 6.45), FJS-12 — 45.85 (25–75, SD 22.03). No radiolucent lines were noticed during this period of observation.

Conclusion. The original additive technology of designing and producing patient-specific titanium cones for compensation of extensive metaphyseal-diaphyseal bone defects in RTKA is a valid solution at least in the short term. A longer follow-up period is required to assess its medium-and long-term reliability compared to existing alternative surgical solutions.