Talar fractures: radiological and CT evaluation and classification systems

Arthroscopic reduction and internal fixation for fracture of the posterior process of the talus (Shepherd's fracture): a case report

INTRODUCTION

Fracture of the lateral tubercle of the posterior process of the talus (Shepherd fracture) is an uncommon injury seen in sport. It is secondary either to indirect trauma on the plantarflexed foot or to high-impact direct trauma. The fracture can be missed with conventional X-rays and therefore advanced imaging methods such as CT scans are usually warranted for management planning. There is a low threshold towards surgical management in the displaced or comminuted case as the delayed functional outcome with conservative treatment is frequently sub-optimal with long-term pain, degenerative changes and non-union. In this regard, recent years saw an increasing interest in the role of minimally invasive approaches for Shepherd´s fracture treatment, such as arthroscopic reduction and internal fixation (ARIF).

CASE REPORT

We present a case of a 27-year-old white male professional football player from Serbia who had Shepard fracture and successfully managed with arthroscopic osteosynthesis. The technical approach is detailed with posterior ankle arthroscopy offering the advantages of a minimally invasive approach with low morbidity and a rapid return to regular sporting activities.

CONCLUSION

The utilization of the 2-port arthroscopic approach this method enables the direct observation of the articular surface along with the corresponding fracture lines, thereby affording the surgeon the chance to achieve accurate reduction via a minimally invasive soft tissue aperture. We advocate that Arthroscopic reduction and internal fixation (ARIF) is a reliable method for the fixation of Shepherd's fracture in the hands of experienced ankle arthroscopists.

Treatment of Complex Central Talar Fractures with Lateral Plate Combination with Medial Screw Fixation

OBJECTIVE

The treatment of talar neck and/or body fractures is known to be difficult and challenging, with significant impact on the long-term functional outcome for the patient. The optimal management, including the choice of surgical approaches and implants, are still under constant discussion. The purpose of the study was to investigate the clinical effects of lateral mini-plate combined with medial lag screws for the treatment of complicated central talar fractures.

METHODS

The data of eight patients with complex central talus fractures treated between June 2019 and January 2021 were retrospectively analyzed. There were six males and two females, ranging in age from 15 to 66 years, with an average age of 37.4 years. There were three cases on the left and five cases on the right. All fractures were comminuted, including talar neck with talar body fracture in seven cases and talar body comminuted with subluxation of subtalar joint in one case. All patients were treated with the anteromedial combined anterolateral approach, lateral talar mini-plate fixation and medial lag screw fixation. Fracture reduction quality, union time, and complications were recorded, and functional outcomes were evaluated using the American Orthopedic Foot & Ankle Society (AOFAS) scoring system.

RESULTS

The time from injury to surgery was 1-6 days, with an average of 3.38 days. The follow-up period was 34-53 months (mean 44.88 months). All fractures healed with a mean healing time of 16.75 weeks (13-23 weeks). Anatomical reduction was observed in six cases and near in two cases. After operation, there was no loosening or breakage of implant, loss of fracture reduction, and irritation of skin and soft tissue by internal fixation. The average AOFAS score was 87.38 (48-100), with excellent five cases, good two cases and poor one case, and the excellent and good rate was 87.5%. Superficial skin necrosis in one surgical incision healed after dressing exchange. No deep infection occurred. One case (1/8, 12.5%) developed avascular necrosis of the talus without collapse. Posttraumatic arthritis was found in four cases (4/8, 50%).

CONCLUSION

The utilization of lateral mini-plates in combination with medial screws for treating complex central talar fractures results in satisfactory reduction and stable fixation, mitigating complications associated with poor reduction. However, due to the absence of an anatomical mini-plate, pre-contouring is necessary when applying the lateral plate. This demands a surgeon's thorough familiarity with the anatomical morphology of the talus and proficiency in surgical techniques. Posttraumatic arthritis is the most common complication of complex central talar fractures.

Comparison of different internal fixation implants in the treatment of talar neck fractures: A finite element analysis

OBJECTIVES

This study aimed to analyze the biomechanics of cannulated screws (CS) with or without a lateral locking plate (LLP) in talar neck fractures through a finite element analysis.

PATIENTS AND METHODS

The computed tomography image of the talus from a healthy volunteer (adult male) was used to reconstruct a three-dimensional talar model. The method for fixing talar neck fractures with CS and an LLP was planned using computer-aided design software. Afterward, the three-dimensional models of comminuted talar neck fractures were used to simulate fixation with anteroposterior parallel dual CS, single CS+LLP, and dual CS+LLP. Finally, finite element analysis was carried out to compare the outcomes of dual CS+LLP to those of single CS+LLP and to those of using dual CS alone. The displacement and von Mises stress values of the three groups with different internal fixation were analyzed.

RESULTS

For a simple talar neck fracture, the lowest amount of displacement was obtained with CS+LLP (0.407 mm), while dual CS (0.459 mm) showed the highest amount of total displacement; the lowest amount of peak stresses was obtained with CS+LLP (5.38 MPa), while dual CS (8.749 MPa) showed the highest amount of total peak stresses. For a comminuted talar neck fracture, the lowest amount of displacement was obtained with CS+LLP (0.398 mm), while dual CS (0.408 mm) showed the highest amount of total displacement; the lowest amount of peak stresses was obtained with CS+LLP (129.9 MPa), while dual CS (205.9 MPa) showed the highest amount of peak stresses.

CONCLUSION

Compared to the other two groups, the dual CS+LLP group had better biomechanics properties in the displacement and stress peak of the talus and implant. Thus, the use of dual CS+LLP fixation is recommended for the surgical treatment of comminuted talar neck fractures.

History of the management of talar fractures: from the fall of king Darius to Garibaldi's bullet and from the earliest to current operative strategies

PURPOSE

This historical review aims to highlight the important roles of the talus in antiquity and to summarise the multiple attempts of managing talar fractures throughout history.

METHOD

Archaeological, religious, artistic, literary, historical and scientific accounts were searched for the descriptions of talus fractures in different eras and their treatments to provide a thorough analysis of the evolution of trauma care up to the present.

RESULTS

This review shows how the talus has always had an important role in several societies: it was used as a die or considered to have a divinatory function in Mesopotamian civilisations, among Greeks and Romans, in Mongolia and in pre-Columbian Americas. Famous talus fractures are recorded in Herodotus' Histories and in the Acts of the Apostles. We report the earliest injuries described and the first operative managements between 1600 and 1800, including the one that saved Garibaldi's life in 1862, until the modern osteosynthesis by the first screws and nails and the current fixation by plating.

CONCLUSION

The blooming of orthopaedic surgery at the end of nineteenth century and the high volume of traumas managed in the World Wars brought a better understanding of fracture patterns and their operative treatment. By the work of Hawkins and his classification, the introduction of the CT scan, a better knowledge of injury modalities and bone vascularisation, these challenging injuries finally land in the contemporary era without mysteries. The subsequently developed surgical procedures, although not guaranteeing success, greatly reduce the risk of necrosis and complication rate, improving patient outcomes.

Talar Body Fracture With Closed Pan-Talar Dislocation

Talar body fracture associated with pan-talar (tibiotalar, talocalcaneal, talonavicular) dislocation is a rare condition. Timely intervention with anatomical reduction will lead to better healing of the fracture. It will result in articular congruity of the talus and less chance of secondary arthritis. We describe a rare talar body fracture with pan-talar dislocation, which does not fit into any of the classifications mentioned in the literature.

A young male of 21 years old was admitted to the trauma and emergency department of a tertiary care hospital within three hours of injury. Following the radiological investigations, the patient was found to have a talar body fracture with pan-talar dislocation. Initially, a close reduction was attempted which failed. Subsequently, it was managed with open reduction and internal fixation after eight hours of injury. Talar body fracture was fixed with cannulated cancellous screws and ankle stabilized with joint spanning external fixator. At six months the patient had satisfactory healing of fracture without any irregularity of the articular surface of talus or arthritic changes of involved joints.

Early surgical intervention with anatomical reduction of talar body fracture with pan-talar dislocation may lead to better union and less chance of secondary arthritis of peri talar joints.

Comparison of X-Ray Imaging and Computed Tomography Scan in the Evaluation of Knee Trauma

Background and objectives: The aim of the study was to compare the accuracy of X-ray (XR) imaging according to computed tomography (CT) scanning in the diagnosis of knee bone fractures, and in the determination of fracture characteristics, and to identify CT scan indications in patients with knee trauma. Materials and methods: The patients who presented to the emergency department (ED) due to knee trauma between January 2017 and December 2018 and who underwent XR imaging and CT scans were included in the study. XR images were reinterpreted by an emergency physician. The official reports, which had been interpreted by a radiologist in the hospital automation system for CT images, were considered valid. Results: Five hundred and forty-eight patients were included in the study. Of the patients, 200 (36.5%) had fractures in XR imaging and 208 (38.0%) had fractures in CT scans. Compared to CT scanning, XR imaging was found to have 89% sensitivity, 95% specificity, 92% positive predictive value, and 92% negative predictive value in identifying the fracture. The sensitivity of XR imaging in identifying growth plate fracture, angulation, stepping off, and extension of the fracture into the joint space was determined as 78% and less. According to the kappa value, there was determined a perfect concordance between the XR imaging and CT scans in angulation, stepping off, and extension of the fracture into the joint space. This concordance was moderate in growth plate fractures. Conclusions: XR imaging has a low sensitivity in identifying knee fractures. There is a moderate concordance between XR imaging and CT scanning in identifying growth plate fractures. Therefore, CT scanning should be performed in patients whose fracture type and fracture characteristics are not able to be determined exactly with XR imaging in knee injury.