Recent Advances in 3D Printing of Polyhydroxyalkanoates: A Review

Materials designed to degrade: structure, properties, processing, and performance relationships in polyhydroxyalkanoate biopolymers

Conventional plastics pose significant environmental and health risks across their life cycle, driving intense interest in sustainable alternatives. Among these, polyhydroxyalkanoates (PHAs) stand out for their biocompatibility, degradation characteristics, and diverse applications. Yet, challenges like production cost, scalability, and limited chemical variety hinder their widespread adoption, impacting material selection and design. This review examines PHA research through the lens of the classical materials tetrahedron, exploring property-structure-processing-performance (PSPP) relationships. By analyzing recent literature and addressing current limitations, we gain valuable insights into PHA development. Despite challenges, we remain optimistic about the role of PHAs in transitioning towards a circular plastic economy, emphasizing the need for further research to unlock their full potential.

Investigating mechanical properties of 3D printed polylactic acid / poly-3-hydroxybutyrate composites. Compressive and fatigue performance

The 3D printing technique known as Material Extrusion (MEX) was initially employed for prototyping, but it has evolved to fit applications in mechanical and biomedical industries. Polylactic acid (PLA) stands out as a commonly used polymer for manufacture pieces by MEX, due to its good properties and organic origins. Pursuing renewable and biodegradable thermoplastics has led to the development materials such as composite of PLA with wood fibers and blends with poly-3-hydroxybutyrate (PHB). This study aims to characterize the effect of the most relevant printing parameters on the mechanical properties of a PLA/PHB blend, motivated by the interest to facilitate the use of this type of materials in industrial applications. To achieve it, compressive and fatigue tests were carried out, comparing the results with those obtained in previous studies for pure PLA and PLA-wood composite. Results show that the compressive behavior of PLA/PHB is influenced by the layer height, nozzle diameter and fill density. Its fatigue behavior is mainly determined by the nozzle diameter and the fill density. Moreover, the mechanical performance of PLA/PHB (Young's Modulus of 1.67 GPa, yield Strength of 33.8 MPa and maximum fatigue life of 9711 cycles) is inferior compared to pure PLA and PLA-wood composite. Despite the increase in the biodegradability that PHB introduces into PLA, the findings of this study reveal that there is statistically evidence that it can also hinder the mechanical performance of the base material.

Innovative Approaches for Manufacturing Epoxy-Modified Wood and Cellulose Fiber Composites: A Comparison between Injection Molding and 3D Printing

The current study focused on improving the properties of polylactic acid (PLA) for wider application in load-bearing scenarios. Various methods were explored to optimize the interaction between PLA and natural fibers, particularly wood fibers (WFs). Alkalized and epoxy-impregnated WFs were evaluated against untreated WFs and cellulose fibers in both injection molding (IM) and fused deposition modeling (FDM). FTIR analysis revealed the removal of hemicellulose and lignin in alkalized WFs and uniform epoxy curing. Addition of fibers reduced PLA's thermal stability while acting as nucleating agents. Additionally, fibers augmented the storage modulus of biocomposites, with alkalized fibers exhibiting the highest tensile modulus in IM. FDM samples with a 0° raster angle showed superior impact resistance compared to IM counterparts. Moreover, raster angle significantly influenced FDM biocomposite properties, enhancing the tensile strength and modulus of untreated WF and cellulose fibers at 0°. Although FDM did not produce alkalized WF samples, epoxy impregnation emerged as a promising method for enhancing PLA/WF composite mechanical properties in the IM process, offering valuable insights for composite material development.

Exploring the Processing Potential of Polylactic Acid, Polyhydroxyalkanoate, and Poly(butylene succinate-co-adipate) Binary and Ternary Blends

Biodegradable and bio-based polymers, including polyhydroxyalkanoate (PHA), polylactic acid (PLA), and poly(butylene succinate-co-adipate) (PBSA), stand out as sustainable alternatives to traditional petroleum-based plastics for a wide range of consumer applications. Studying binary and ternary blends is essential to exploring the synergistic combinations and efficiencies of three distinct biopolyesters. A comprehensive evaluation of melt-extruded binary and ternary polymer blends of PHA, PLA, and PBSA was conducted. Scanning electron microscopy (SEM) analyses revealed a heterogeneous morphology characteristic of immiscible blends, with a predominant spherical inclusion morphology observed in the majority of the blends. An increased PBSA concentration led to an elevation in melt viscosity and elasticity across both ternary and binary blends. An increased PHA content reduced the viscosity, along with both storage and loss moduli in the blends. Moreover, a rise in PHA concentration within the blends led to increased crystallinity, albeit with a noticeable reduction in the crystallization temperature of PHA. PLA retained amorphous structure in the blends. The resultant bio-based blends manifested enhanced rheological and calorimetric traits, divergent from their pure polymer counterparts, highlighting the potential for optimizing material properties through strategic formulation adjustments.

Advances in medical polyesters for vascular tissue engineering

Blood vessels are highly dynamic and complex structures with a variety of physiological functions, including the transport of oxygen, nutrients, and metabolic wastes. Their normal functioning involves the close and coordinated cooperation of a variety of cells. However, adverse internal and external environmental factors can lead to vascular damage and the induction of various vascular diseases, including atherosclerosis and thrombosis. This can have serious consequences for patients, and there is an urgent need for innovative techniques to repair damaged blood vessels. Polyesters have been extensively researched and used in the treatment of vascular disease and repair of blood vessels due to their excellent mechanical properties, adjustable biodegradation time, and excellent biocompatibility. Given the high complexity of vascular tissues, it is still challenging to optimize the utilization of polyesters for repairing damaged blood vessels. Nevertheless, they have considerable potential for vascular tissue engineering in a range of applications. This summary reviews the physicochemical properties of polyhydroxyalkanoate (PHA), polycaprolactone (PCL), poly-lactic acid (PLA), and poly(lactide-co-glycolide) (PLGA), focusing on their unique applications in vascular tissue engineering. Polyesters can be prepared not only as 3D scaffolds to repair damage as an alternative to vascular grafts, but also in various forms such as microspheres, fibrous membranes, and nanoparticles to deliver drugs or bioactive ingredients to damaged vessels. Finally, it is anticipated that further developments in polyesters will occur in the near future, with the potential to facilitate the wider application of these materials in vascular tissue engineering.

Genetic Modifications in Bacteria for the Degradation of Synthetic Polymers: A Review

Synthetic polymers, commonly known as plastics, are currently present in all aspects of our lives. Although they are useful, they present the problem of what to do with them after their lifespan. There are currently mechanical and chemical methods to treat plastics, but these are methods that, among other disadvantages, can be expensive in terms of energy or produce polluting gases. A more environmentally friendly alternative is recycling, although this practice is not widespread. Based on the practice of the so-called circular economy, many studies are focused on the biodegradation of these polymers by enzymes. Using enzymes is a harmless method that can also generate substances with high added value. Novel and enhanced plastic-degrading enzymes have been obtained by modifying the amino acid sequence of existing ones, especially on their active site, using a wide variety of genetic approaches. Currently, many studies focus on the common aim of achieving strains with greater hydrolytic activity toward a different range of plastic polymers. Although in most cases the depolymerization rate is improved, more research is required to develop effective biodegradation strategies for plastic recycling or upcycling. This review focuses on a compilation and discussion of the most important research outcomes carried out on microbial biotechnology to degrade and recycle plastics.

Using waste biomass to produce 3D-printed artificial biodegradable structures for coastal ecosystem restoration

The loss of ecosystem functions and services caused by rapidly declining coastal marine ecosystems, including corals and bivalve reefs and wetlands, around the world has sparked significant interest in interdisciplinary methods to restore these ecologically and socially important ecosystems. In recent years, 3D-printed artificial biodegradable structures that mimic natural life stages or habitat have emerged as a promising method for coastal marine restoration. The effectiveness of this method relies on the availability of low-cost biodegradable printing polymers and the development of 3D-printed biomimetic structures that efficiently support the growth of plant and sessile animal species without harming the surrounding ecosystem. In this context, we present the potential and pathway for utilizing low-cost biodegradable biopolymers from waste biomass as printing materials to fabricate 3D-printed biodegradable artificial structures for restoring coastal marine ecosystems. Various waste biomass sources can be used to produce inexpensive biopolymers, particularly those with the higher mechanical rigidity required for 3D-printed artificial structures intended to restore marine ecosystems. Advancements in 3D printing methods, as well as biopolymer modifications and blending to address challenges like biopolymer solubility, rheology, chemical composition, crystallinity, plasticity, and heat stability, have enabled the fabrication of robust structures. The ability of 3D-printed structures to support species colonization and protection was found to be greatly influenced by their biopolymer type, surface topography, structure design, and complexity. Considering limited studies on biodegradability and the effect of biodegradation products on marine ecosystems, we highlight the need for investigating the biodegradability of biopolymers in marine conditions as well as the ecotoxicity of the degraded products. Finally, we present the challenges, considerations, and future perspectives for designing tunable biomimetic 3D-printed artificial biodegradable structures from waste biomass biopolymers for large-scale coastal marine restoration.

PHA is not just a bioplastic!

Polyhydroxyalkanoates (PHA) have evolved into versatile biopolymers, transcending their origins as mere bioplastics. This extensive review delves into the multifaceted landscape of PHA applications, shedding light on the diverse industries that have harnessed their potential. PHA has proven to be an invaluable eco-conscious option for packaging materials, finding use in films foams, paper coatings and even straws. In the textile industry, PHA offers a sustainable alternative, while its application as a carbon source for denitrification in wastewater treatment showcases its versatility in environmental remediation. In addition, PHA has made notable contributions to the medical and consumer sectors, with various roles ranging from 3D printing, tissue engineering implants, and cell growth matrices to drug delivery carriers, and cosmetic products. Through metabolic engineering efforts, PHA can be fine-tuned to align with the specific requirements of each industry, enabling the customization of material properties such as ductility, elasticity, thermal conductivity, and transparency. To unleash PHA's full potential, bridging the gap between research and commercial viability is paramount. Successful PHA production scale-up hinges on establishing direct supply chains to specific application domains, including packaging, food and beverage materials, medical devices, and agriculture. This review underscores that PHA's future rests on ongoing exploration across these industries and more, paving the way for PHA to supplant conventional plastics and foster a circular economy.

Repurposing of waste PET by microbial biotransformation to functionalized materials for additive manufacturing

Plastic waste is an outstanding environmental thread. Poly(ethylene terephthalate) (PET) is one of the most abundantly produced single-use plastics worldwide, but its recycling rates are low. In parallel, additive manufacturing is a rapidly evolving technology with wide-ranging applications. Thus, there is a need for a broad spectrum of polymers to meet the demands of this growing industry and address post-use waste materials. This perspective article highlights the potential of designing microbial cell factories to upcycle PET into functionalized chemical building blocks for additive manufacturing. We present the leveraging of PET hydrolyzing enzymes and rewiring the bacterial C2 and aromatic catabolic pathways to obtain high-value chemicals and polymers. Since PET mechanical recycling back to original materials is cost-prohibitive, the biochemical technology is a viable alternative to upcycle PET into novel 3D printing materials, such as replacements for acrylonitrile butadiene styrene. The presented hybrid chemo-bio approaches potentially enable the manufacturing of environmentally friendly degradable or higher-value high-performance polymers and composites and their reuse for a circular economy.

ONE-SENTENCE SUMMARY

Biotransformation of waste PET to high-value platform chemicals for additive manufacturing.

The General Composition of Polyhydroxyalkanoates and Factors that Influence their Production and Biosynthesis

Polyhydroxyalkanoates (PHAs) have been a current research topic for many years. PHAs are biopolymers produced by bacteria under unfavorable growth conditions. They are biomaterials that exhibit a variety of properties, including biocompatibility, biodegradability, and high mechanical strength, making them suitable for future applications. This review aimed to provide general information on PHAs, such as their structure, classification, and parameters that affect the production process. In addition, the most commonly used bacterial strains that produce PHAs are highlighted, and details are provided on the type of carbon source used and how to optimize the parameters for bioprocesses. PHAs present a challenge to researchers because a variety of parameters affect biosynthesis, including the variety of carbon sources, bacterial strains, and culture media. Nevertheless, PHAs represent an opportunity to replace plastics, because they can be produced quickly and at a relatively low cost. With growing environmental concerns and declining oil reserves, polyhydroxyalkanoates are a potential replacement for nonbiodegradable polymers. Therefore, the study of PHA production remains a hot topic, as many substrates can be used as carbon sources. Both researchers and industry are interested in facilitating the production, commercialization, and application of PHAs as potential replacements for nonbiodegradable polymers. The fact that they are biocompatible, environmentally biodegradable, and adaptable makes PHAs one of the most important materials available in the market. They are preferred in various industries, such as agriculture (for bioremediation of oil-polluted sites, minimizing the toxicity of pollutants, and environmental impact) or medicine (as medical devices). The various bioprocess technologies mentioned earlier will be further investigated, such as the carbon source (to obtain a biopolymer with the lowest possible cost, such as glucose, various fatty acids, and especially renewable sources), pretreatment of the substrate (to increase the availability of the carbon source), and supplementation of the growth environment with different substances and minerals). Consequently, the study of PHA production remains a current topic because many substrates can be used as carbon sources. Obtaining PHA from renewable substrates (waste oil, coffee grounds, plant husks, etc.) contributes significantly to reducing PHA costs. Therefore, in this review, pure bacterial cultures (Bacillus megaterium, Ralstonia eutropha, Cupriavidus necator, and Pseudomonas putida) have been investigated for their potential to utilize by-products as cheap feedstocks. The advantage of these bioprocesses is that a significant amount of PHA can be obtained using renewable carbon sources. The main disadvantage is that the chemical structure of the obtained biopolymer cannot be determined in advance, as is the case with bioprocesses using a conventional carbon source. Polyhydroxyalkanoates are materials that can be used in many fields, such as the medical field (skin grafts, implantable medical devices, scaffolds, drug-controlled release devices), agriculture (for polluted water cleaning), cosmetics and food (biodegradable packaging, gentle biosurfactants with suitable skin for cosmetics), and industry (production of biodegradable biopolymers that replace conventional plastic). Nonetheless, PHA biopolymers continue to be researched and improved and play an important role in various industrial sectors. The properties of this material allow its use as a biodegradable material in the cosmetics industry (for packaging), in the production of biodegradable plastics, or in biomedical engineering, as various prostheses or implantable scaffolds.

Theoretical, Numerical and Experimental Assessment of Temperature Response in Polylactic Acid and Acrylonitrile Butadiene Styrene Used in Additive Manufacturing

A better understanding of heat transfer through materials used for 3D-printed parts could lead to an extension and an optimization of their use. A topic of interest could be analyzing temperature variation in these materials during cooling processes. Experimental research and equipment were designed to obtain additional information on the surface temperature decrease when the opposite wall surface is exposed to a freezing temperature. Experimental tests were performed on samples made of polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS). An experimental Taguchi L8 program was used, with seven independent variables at two levels of variation. The experimental data analysis with specialized software based on the least-squares method identified a mathematical model of first-degree polynomial type. The coefficients for each input factor involved provide information on the magnitude and trend of the considered output parameter when the input factors’ values change. It was found that the thickness of the 3D printing layer, the thickness of the test sample, and the 3D printing speed are the main factors that affect the temperature decrease rate.

Acute toxicity of bioplastic leachates to Paracentrotus lividus sea urchin larvae

In an attempt to ensure that bioplastics, progressively replacing petrochemical-derived plastics, do not release any harmful compound to the environment, the study assessed the toxic effects of three innovative bioplastic products: polyhydroxybutyrate resin (PHB), polylactic acid cups (PLA) and a polylactic acid/polyhydroxyalkanoate 3D printing filament (PLA/PHA), together with a synthetic polyvinyl chloride (PVC) toy in Paracentrotus lividus sea urchin larvae. PVC toy was the most toxic material, likely due to the added plasticizers; remarkably, even if PHB is conceived as a nontoxic polymer, it showed a slight toxicity and Gas Chromatography-Mass Spectometry analysis (GC-MS) revealed the presence of a wide range of additives. Conversely, PLA cups and PLA/PHA filament were innocuous for the larvae, a positive outcome for these renewable solutions. Proven that additives are also used in some bioplastic formulations, they should be carefully addressed to ensure that they are as safe as regarded.

A New Wave of Industrialization of PHA Biopolyesters

The ever-increasing use of plastics, their fossil origin, and especially their persistence in nature have started a wave of new innovations in materials that are renewable, offer the functionalities of plastics, and are biodegradable. One such class of biopolymers, polyhydroxyalkanoates (PHAs), are biosynthesized by numerous microorganisms through the conversion of carbon-rich renewable resources. PHA homo- and heteropolyesters are intracellular products of secondary microbial metabolism. When isolated from microbial biomass, PHA biopolymers mimic the functionalities of many of the top-selling plastics of petrochemical origin, but biodegrade in soil, freshwater, and marine environments, and are both industrial- and home-compostable. Only a handful of PHA biopolymers have been studied in-depth, and five of these reliably match the desired material properties of established fossil plastics. Realizing the positive attributes of PHA biopolymers, several established chemical companies and numerous start-ups, brand owners, and converters have begun to produce and use PHA in a variety of industrial and consumer applications, in what can be described as the emergence of the “PHA industry”. While this positive industrial and commercial relevance of PHA can hardly be described as the first wave in its commercial development, it is nonetheless a very serious one with over 25 companies and start-ups and 30+ brand owners announcing partnerships in PHA production and use. The combined product portfolio of the producing companies is restricted to five types of PHA, namely poly(3-hydroxybutyrate), poly(4-hydroxybutyrate), poly(3-hydroxybutyrate-co-3-hydroxyvalerate), poly(3-hydroxybutyrate-co-4-hydroxybutyrate), and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate), even though PHAs as a class of polymers offer the potential to generate almost limitless combinations of polymers beneficial to humankind. To date, by varying the co-monomer type and content in these PHA biopolymers, their properties emulate those of the seven top-selling fossil plastics, representing 230 million t of annual plastics production. Capacity expansions of 1.5 million t over the next 5 years have been announced. Policymakers worldwide have taken notice and are encouraging industry to adopt biodegradable and compostable material solutions. This wave of commercialization of PHAs in single-use and in durable applications holds the potential to make the decisive quantum leap in reducing plastic pollution, the depletion of fossil resources, and the emission of greenhouse gases and thus fighting climate change. This review presents setbacks and success stories of the past 40 years and the current commercialization wave of PHA biopolymers, their properties, and their fields of application.

Production of PHB From CO2-Derived Acetate With Minimal Processing Assessed for Space Biomanufacturing

Providing life-support materials to crewed space exploration missions is pivotal for mission success. However, as missions become more distant and extensive, obtaining these materials from in situ resource utilization is paramount. The combination of microorganisms with electrochemical technologies offers a platform for the production of critical chemicals and materials from CO₂ and H₂O, two compounds accessible on a target destination like Mars. One such potential commodity is poly(3-hydroxybutyrate) (PHB), a common biopolyester targeted for additive manufacturing of durable goods. Here, we present an integrated two-module process for the production of PHB from CO₂. An autotrophic Sporomusa ovata (S. ovata) process converts CO₂ to acetate which is then directly used as the primary carbon source for aerobic PHB production by Cupriavidus basilensis (C. basilensis). The S. ovata uses H₂ as a reducing equivalent to be generated through electrocatalytic solar-driven H₂O reduction. Conserving and recycling media components is critical, therefore we have designed and optimized our process to require no purification or filtering of the cell culture media between microbial production steps which could result in up to 98% weight savings. By inspecting cell population dynamics during culturing we determined that C. basilensis suitably proliferates in the presence of inactive S. ovata. During the bioprocess 10.4 mmol acetate L ^-1 day^-1 were generated from CO₂ by S. ovata in the optimized media. Subsequently, 12.54 mg PHB L^-1 hour^-1 were produced by C. basilensis in the unprocessed media with an overall carbon yield of 11.06% from acetate. In order to illustrate a pathway to increase overall productivity and enable scaling of our bench-top process, we developed a model indicating key process parameters to optimize.

Additive manufacturing of polyhydroxyalkanoates (PHAs) biopolymers: Materials, printing techniques, and applications

Additive manufacturing (AM) is recently imposing as a fast, reliable, and highly flexible solution to process various materials, that range from metals to polymers, to achieve a broad variety of customized end-goods without involving the injection molding process. The employment of biomaterials is of utmost relevance as the environmental footprint of the process and, consequently, of the end-goods is significantly decreased. Additive manufacturing can provide, in particular, an all-in-one platform to fabricate complex-shaped biobased items such as bone implants or biomedical devices, that would be, otherwise, extremely troublesome and costly to achieve. Polyhydroxyalkanoates (PHAs) is an emerging class of biobased and biodegradable polymeric materials achievable by fermentation from bacteria. There are some promising scientific and technical reports on the manufacturing of several commodities in PHAs by additive manufacturing. However, many challenges must still be faced in order to expand further the use of PHAs. In this framework, the present work reviews and classifies the relevant papers focused on the design and development of PHAs for different 3D printing techniques and overviews the most recent applications of this approach.

Properties and structure of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) filaments for fused deposition modelling

Fused deposition modelling (FDM) is a process of additive manufacturing allowing creating of highly precise complex three-dimensional objects for a large range of applications. The principle of FDM is an extrusion of the molten filament and gradual deposition of layers and their solidification. Potential applications in pharmaceutical and medical fields require the development of biodegradable and biocompatible thermoplastics for the processing of filaments. In this work, the potential of production of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-co-4HB)) filaments for FDM was investigated in respect to its thermal stability. Copolymer P(3HB-co-4HB) was biosynthesised by Cupriavidus malaysiensis. Rheological and mechanical properties of the copolymer were modified by the addition of plasticizers or blending with poly(lactic acid). Thermal stability of mixtures was studied employing thermogravimetric analysis and rheological analyses by monitoring the time-dependent changes in the complex viscosity of melt samples. The plasticization of P(3HB-co-4HB) slightly hindered its thermal degradation but the best stabilization effect was found in case of the copolymer blended with poly(lactic acid). Overall, rheological, thermal and mechanical properties demonstrated that the plasticized P(3HB-co-4HB) is a potential candidate of biodegradable polymer for FDM processes.