Synthesis and characterization of temperature-sensitive and biodegradable hydrogel based on N-isopropylacrylamide

Thermo-sensitivity and erosion of chitosan crosslinked poly[N-isopropylacrylamide-co-(acrylic acid)-co-(methyl methacrylate)] hydrogels for application to the inferior fornix

Thermo-gels based on chitosan crosslinked poly(N-isopropylacrylamide) were developed as alternatives to conventional eye drops for the sustained release of ketotifen fumarate in the treatment of allergic conjunctivitis. The thermo-gelling properties of the base polymer were altered prior to crosslinking with chitosan by incorporation of the hydrophilic and hydrophobic comonomers acrylic acid and methyl methacrylate respectively. Varying amounts of chitosan were incorporated by ionic interaction to produce polyelectrolyte complexes or by carbodiimide chemistry to produce covalently crosslinked networks. The lower critical solution temperature of all the chitosan crosslinked thermo-gels produced was below the surface temperature of the eye. All the chitosan crosslinked thermo-gels were found to have greater than 80% equilibrium water contents following gelation. The method and amount of chitosan incorporation allowed for tailor-ability of material rheologic properties, with full degradation occurring over a one-to-four-day period, and tailorable rates of release of 40-60% of the loaded allergy medication ketotifen fumarate. The chitosan crosslinked thermo-gels were demonstrated to be nontoxic both in vitro and in vivo. It was demonstrated that the synthesized materials could be applied to the inferior fornix of eye, sustaining a multiple day release of ketotifen fumarate, as an alternative to conventional eyedrops. STATEMENT OF SIGNIFICANCE: Topical eyedrops are the main treatment modality for anterior ocular conditions. However, due to the natural clearance mechanisms of the eye, topical eyedrops are well established to be largely ineffective as a method of drug delivery. Herein, we investigate a method of altering thermo-gel properties of an n-isopropylacrylamide based polymer to enable the incorporation of greater amounts of chitosan by different methods of crosslinking. By controlling the synthesis parameters, final material properties can be tailored to impart ideal spreading, retention on the eye, and the rate of degradation and drug release over several days. This work also focuses on studying the rheological properties of the chitosan crosslinked thermo-gels which has not been investigated previously.

Smart Hydrogel Bilayers Prepared by Irradiation

Environment-responsive hydrogel actuators have attracted tremendous attention due to their intriguing properties. Gamma radiation has been considered as a green cross-linking process for hydrogel synthesis, as toxic cross-linking agents and initiators were not required. In this work, chitosan/agar/P(N-isopropyl acrylamide-co-acrylamide) (CS/agar/P(NIPAM-co-AM)) and CS/agar/Montmorillonite (MMT)/PNIPAM temperature-sensitive hydrogel bilayers were synthesized via gamma radiation at room temperature. The mechanical properties and temperature sensitivity of hydrogels under different agar content and irradiation doses were explored. The enhancement of the mechanical properties of the composite hydrogel can be attributed to the presence of agar and MMT. Due to the different temperature sensitivities provided by the two layers of hydrogel, they can move autonomously and act as a flexible gripper as the temperature changes. Thanks to the antibacterial properties of the hydrogel, their storage time and service life may be improved. The as prepared hydrogel bilayers have potential applications in control devices, soft robots, artificial muscles and other fields.

Mechanical, thermal and surface properties of polyacrylamide/dextran semi-interpenetrating network hydrogels tuned by the synthesis temperature

The mechanical, rheological, thermal, and surface behaviors of three polyacrylamide/dextran (PAAm/Dx) semi-interpenetrating polymer network (semi-IPN) hydrogels, prepared at 22°C, 5°C and −18°C, were investigated. The results were compared with those obtained on cross-linked PAAm without Dx synthesized under the same conditions. Hydrogels prepared at the lowest temperature were the most mechanically stable. The thermal stability of the semi-IPN hydrogels is slightly lower than the corresponding PAAm gels, irrespective of preparation temperature. The water vapor sorption capacity depended on the presence of Dx as well as preparation temperature, which determines the network morphology.

Synthesis and fabrication of a degradable poly(N-isopropyl acrylamide) scaffold for tissue engineering applications

Biodegradable poly(N-isopropyl acrylamide) (polyNIPAM) hydrogels with controlled molecular weight of the parent polymer and its degradation products were synthesized by atom transfer radical polymerization in the presence of a polycaprolactone-based di-chlorinated macroinitiator and polycaprolactone dimethacrylate. The phase transition temperature, swelling, hydrolytic degradability, and mechanical properties at 25 and 37°C were explored. A cytocompatibility study showed good NIH3T3 cell response over 5 days culture on the surface of the hydrogels, demonstrated by a consistent increase in cell proliferation detected by an Alamar Blue assay. MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] results suggested that the hydrogels and their degradation products in the concentration range of 1-25 mg/mL were not cytotoxic to NIH3T3 cells. A sphere-templating technique was utilized to fabricate biodegradable polyNIPAM scaffolds with monodisperse, pore size. Scaffolds with pore diameter of 48 ± 6 μm were loaded with A-10 smooth muscle cells and then warmed to 37°C entrapping cells in pores approximately 40 μm in diameter, a size we have found to be optimal for angiogenesis and biointegration. Due to their degradable nature, tunable molecular weight, highly interconnected morphology, thermally controlled monodisperse pore size, and temperature-induced volume expansion-contraction, the polyNIPAM-based scaffolds developed in this work will be valuable in tissue engineering.