Sensitive and fast determination of papaverine by adsorptive stripping voltammetry on renewable mercury film electrode

Development of a Dy2O3@Eu2O3-carbon nanofiber based electrode for highly sensitive detection of papaverine

A sensitive electrochemical method based on carbon nanofibers (CNFs) and bimetallic nanoparticles of dysprosium oxide (Dy₂O₃) and europium oxide (Eu₂O₃) was developed for the determination of papaverine in pharmaceuticals and human urine. Several electrodes were compared in respect to their electrochemically active surface area calculated as 0.0603, 0.1300, 0.3440, 0.3740 and 0.4990 cm² for bare GCE, CNFs/GCE, Eu₂O₃-CNFs/GCE, Dy₂O₃-CNFs/GCE and Dy₂O₃@Eu₂O₃-CNFs/GCE, respectively. Electrodes were also compared in respect to their performance towards the voltammetric process of papaverine. The peak potential (Epa) of papaverine was 1.094 V, 0.993 V, 0.978 V, 0.969 V and 0.966 V at unmodified GCE, CNFs/GCE, Eu₂O₃-CNFs/GCE, Dy₂O₃-CNFs/GCE and Dy₂O₃@Eu₂O₃-CNFs/GCE, respectively. This indicated that the oxidation peak potential of papaverine shifted gradually towards the negative potentials and the peak current increased gradually from unmodified GCE to CNFs/GCE, Eu₂O₃-CNFs/GCE, Dy₂O₃-CNFs/GCE and Dy₂O₃@Eu₂O₃-CNFs/GCE. The influence of experimental parameters such as scan rate and pH on the voltammetry of papaverine was studied. The Dy₂O₃@Eu₂O₃-CNFs/GCE system presented a dynamic working range between 1.0 × 10^-7 and 2.0 × 10^-6 M with a detection limit of 1.0 × 10^-8 M for papaverine. The platform (Dy₂O₃@Eu₂O₃-CNFs/GCE) exhibited excellent sensitivity and selectivity for papaverine in the presence of uric acid and was successfully applied for determining papaverine in pharmaceuticals and urine samples.

Fast and Sensitive Voltammetric Method for the Determination of Rifampicin on Renewable Amalgam Film Electrode

In this work, a new sensitive voltammetric method for the determination of rifampicin without time-consuming preconcentration is presented. The objective was to develop a simple, fast and sensitive voltammetric procedure for the analysis of rifampicin in pharmaceutical products. The cyclic renewable mercury film silver-based electrode (Hg(Ag)FE) was applied as a working electrode for this purpose. The optimal conditions for the determination of rifampicin were defined, in terms of the composition of supporting electrolyte (including pH) and instrumental parameters (potential and time of deposition, step potential, pulse height). The method was validated resulting in a satisfactory linearity range of 0.4-250.0 µgmL-1; the limits of detection and quantification are 0.12 µgmL-1 and 0.4 µgmL-1, respectively; and the repeatability of the method expressed as RSD is 4.1% (n = 6) with a surface area of 10.9 mm2. The proposed method was successfully applied in the analysis of rifampicin in simple and composed pharmaceutical formulations.