Cell size dynamics and viability of cells exposed to hypotonic treatment and electroporation for electrofusion optimization

Eukaryotic cell size regulation and its implications for cellular function and dysfunction

Depending on cell type, environmental inputs, and disease, the cells in the human body can have widely different sizes. In recent years, it has become clear that cell size is a major regulator of cell function. However, we are only beginning to understand how the optimization of cell function determines a given cell's optimal size. Here, we review currently known size control strategies of eukaryotic cells and the intricate link of cell size to intracellular biomolecular scaling, organelle homeostasis, and cell cycle progression. We detail the cell size-dependent regulation of early development and the impact of cell size on cell differentiation. Given the importance of cell size for normal cellular physiology, cell size control must account for changing environmental conditions. We describe how cells sense environmental stimuli, such as nutrient availability, and accordingly adapt their size by regulating cell growth and cell cycle progression. Moreover, we discuss the correlation of pathological states with misregulation of cell size and how for a long time this was considered a downstream consequence of cellular dysfunction. We review newer studies that reveal a reversed causality, with misregulated cell size leading to pathophysiological phenotypes such as senescence and aging. In summary, we highlight the important roles of cell size in cellular function and dysfunction, which could have major implications for both diagnostics and treatment in the clinic.

Feasibility Study for the Use of Gene Electrotransfer and Cell Electrofusion as a Single-Step Technique for the Generation of Activated Cancer Cell Vaccines

Cell-based therapies hold great potential for cancer immunotherapy. This approach is based on manipulation of dendritic cells to activate immune system against specific cancer antigens. For the development of an effective cell vaccine platform, gene transfer, and cell fusion have been used for modification of dendritic or tumor cells to express immune (co)stimulatory signals and to load dendritic cells with tumor antigens. Both, gene transfer and cell fusion can be achieved by single technique, a cell membrane electroporation. The cell membrane exposed to external electric field becomes temporarily permeable, enabling introduction of genetic material, and also fusogenic, enabling the fusion of cells in the close contact. We tested the feasability of combining gene electrotransfer and electrofusion into a single-step technique and evaluated the effects of electroporation buffer, pulse parameters, and cell membrane fluidity for single or combined method of gene delivery or cell fusdion. We determined the percentage of fused cells expressing green fluorescence protein (GFP) in a murine cell model of melanoma B16F1, cell line used in our previous studies. Our results suggest that gene electrotransfer and cell electrofusion can be applied in a single step. The percentage of viable hybrid cells expressing GFP depends on electric pulse parameters and the composition of the electroporation buffer. Furthermore, our results suggest that cell membrane fluidity is not related to the efficiency of the gene electrotransfer and electrofusion. The protocol is compatible with microfluidic devices, however further optimization of electric pulse parameters and buffers is still needed.

An experimental and theoretical study on cell swelling for osmotic imbalance induced by electroporation

The cellular membrane serves as a pivotal barrier in regulating intra- and extracellular matter exchange. Disruption of this barrier through pulsed electric fields (PEFs) induces the transmembrane transport of ions and molecules, creating a concentration gradient that subsequently results in the imbalance of cellular osmolality. In this study, a multiphysics model was developed to simulate the electromechanical response of cells exposed to microsecond pulsed electric fields (μsPEFs). Within the proposed model, the diffusion coefficient of the cellular membrane for various ions was adjusted based on electropore density. Cellular osmolality was governed and described using Van't Hoff theory, subsequently converted to loop stress to dynamically represent the cell swelling process. Validation of the model was conducted through a hypotonic experiment and simulation at 200 mOsm/kg, revealing a 14.2% increase in the cell's equivalent radius, thereby confirming the feasibility of the cell mechanical model. With the transmembrane transport of ions induced by the applied μsPEF, the hoop stress acting on the cellular membrane reached 179.95 Pa, and the cell equivalent radius increased by 11.0% when the extra-cellular medium was supplied with normal saline. The multiphysics model established in this study accurately predicts the dynamic changes in cell volume resulting from osmotic imbalance induced by PEF action. This model holds theoretical significance, offering valuable references for research on drug delivery and tumor microenvironment modulation.

Microarray Chip and Method for Simultaneous and Highly Consistent Electroporation of Multiple Cells of Different Sizes

Cell electroporation is an important cell manipulation technology to artificially transfer specific extracellular components into cells. However, the consistency of substance transport during the electroporation process is still an issue due to the wide size distribution of the natural cells. In this study, a cell electroporation microfluidic chip based on a microtrap array is proposed. The microtrap structure was optimized for single-cell capture and electric field focusing. The effects of the cell size on the cell electroporation in the microchip were investigated through simulation and experiment methods using the giant unilamellar vesicle as the simplified cell model, and a numerical model of a uniform electric field was used as a comparison. Compared with the uniform electric field, a lower threshold electric field is required to induce electroporation and produces a higher transmembrane voltage on the cell under a specific electric field in the microchip, showing an improvement in cell viability and electroporation efficiency. The larger perforated area produced on the cells in the microchip under a specific electric field allows a higher substance transfer efficiency, and the electroporation results are less affected by the cell size, which is beneficial for improving substance transfer consistency. Furthermore, the relative perforation area increases with the decrease of the cell diameter in the microchip, which is exactly opposite to that in a uniform electric field. By manipulating the electric field applied to the microtrap individually, a consistent proportion of substance transfer during electroporation of cells with different sizes can be achieved.

Recent advances in microfluidic-based electroporation techniques for cell membranes

Electroporation is a fundamental technique for applications in biotechnology. To date, the ongoing research on cell membrane electroporation has explored its mechanism, principles and potential applications. Therefore, in this review, we first discuss the primary electroporation mechanism to help establish a clear framework. Within the context of its principles, several critical terms are highlighted to present a better understanding of the theory of aqueous pores. Different degrees of electroporation can be used in different applications. Thus, we discuss the electric factors (shock strength, shock duration, and shock frequency) responsible for the degree of electroporation. In addition, finding an effective electroporation detection method is of great significance to optimize electroporation experiments. Accordingly, we summarize several primary electroporation detection methods in the following sections. Finally, given the development of micro- and nano-technology has greatly promoted the innovation of microfluidic-based electroporation devices, we also present the recent advances in microfluidic-based electroporation devices. Also, the challenges and outlook of the electroporation technique for cell membrane electroporation are presented.

Single Cell Forces after Electroporation

Exogenous high-voltage pulses increase cell membrane permeability through a phenomenon known as electroporation. This process may also disrupt the cell cytoskeleton causing changes in cell contractility; however, the contractile signature of cell force after electroporation remains unknown. Here, single-cell forces post-electroporation are measured using suspended extracellular matrix-mimicking nanofibers that act as force sensors. Ten, 100 μs pulses are delivered at three voltage magnitudes (500, 1000, and 1500 V) and two directions (parallel and perpendicular to cell orientation), exposing glioblastoma cells to electric fields between 441 V cm-1 and 1366 V cm-1. Cytoskeletal-driven force loss and recovery post-electroporation involves three distinct stages. Low electric field magnitudes do not cause disruption, but higher fields nearly eliminate contractility 2-10 min post-electroporation as cells round following calcium-mediated retraction (stage 1). Following rounding, a majority of analyzed cells enter an unusual and unexpected biphasic stage (stage 2) characterized by increased contractility tens of minutes post-electroporation, followed by force relaxation. The biphasic stage is concurrent with actin disruption-driven blebbing. Finally, cells elongate and regain their pre-electroporation morphology and contractility in 1-3 h (stage 3). With increasing voltages applied perpendicular to cell orientation, we observe a significant drop in cell viability. Experiments with multiple healthy and cancerous cell lines demonstrate that contractile force is a more dynamic and sensitive metric than cell shape to electroporation. A mechanobiological understanding of cell contractility post-electroporation will deepen our understanding of the mechanisms that drive recovery and may have implications for molecular medicine, genetic engineering, and cellular biophysics.

Cell Volume Changes and Membrane Ruptures Induced by Hypotonic Electrolyte and Sugar Solutions

The cell volume changes induced by hypotonic electrolyte and sucrose solutions were studied in Chinese-hamster-ovary epithelial cells. The effects in the solutions with osmolarities between 32 and 315 mosM/L and distilled water were analyzed using bright-field and fluorescence confocal microscopy. The changes of the cell volume, accompanied by the detachment of cells, the formation of blebs, and the occurrence of almost spherical vesicle-like cells (“cell-vesicles”), showed significant differences in the long-time responses of the cells in the electrolyte solutions compared with the sucrose-containing solutions. A theoretical model based on different permeabilities of ions and sucrose molecules and on the action of Na⁺/K⁺-ATPase pumps is applied. It is consistent with the observed temporal behavior of the cells’ volume and the occurrence of tension-induced membrane ruptures and explains lower long-time responses of the cells in the sucrose solutions.

Acoustophoretic rapid media exchange and continuous-flow electrotransfection of primary human T cells for applications in automated cellular therapy manufacturing

Autologous cellular therapies based on modifying T cells to express chimeric antigen receptor genes have been highly successful in treating hematological cancers. Deployment of these therapies is limited by the complexity and costs associated with their manufacturing. Transitioning these processes from virus-based methods for gene delivery to a non-viral method, such as electroporation, has the potential to greatly reduce cost and manufacturing time while increasing safety and efficacy. Major challenges with electroporation are the negative impacts on cell health associated with exposure to high-magnitude electric fields, and that most commercial bulk electroporators are low-precision instruments designed for manually-operated, lower-throughput batch processing of cells. Negative effects on cell health can be mitigated by use of specialized electroporation medias, but this adds processing steps, and long-term exposure to these medias can reduce transfection efficiency and post-transfection viability. To enable automated, clinical-scale production of cellular therapies using electrotransfection in specialized medias, we developed a high-precision microfluidic platform that automatically and continuously transfers cells from culture media into electroporation media using acoustophoresis, and then immediately applies electric fields from integrated electrodes. This limits cell residence time in electroporation media to seconds, and enables high transfection efficiency with minimum impact on cell viability. We tested our system by transferring primary human T cells from a standard cell media to electroporation media, and then transfecting them with mRNA encoding an mCherry fluorescent protein. We achieved a media exchange efficiency of 86% and transfection efficiency of up to 60%, with less than a 5% reduction in viability.

Intracellular Delivery by Membrane Disruption: Mechanisms, Strategies, and Concepts

Intracellular delivery is a key step in biological research and has enabled decades of biomedical discoveries. It is also becoming increasingly important in industrial and medical applications ranging from biomanufacture to cell-based therapies. Here, we review techniques for membrane disruption-based intracellular delivery from 1911 until the present. These methods achieve rapid, direct, and universal delivery of almost any cargo molecule or material that can be dispersed in solution. We start by covering the motivations for intracellular delivery and the challenges associated with the different cargo types-small molecules, proteins/peptides, nucleic acids, synthetic nanomaterials, and large cargo. The review then presents a broad comparison of delivery strategies followed by an analysis of membrane disruption mechanisms and the biology of the cell response. We cover mechanical, electrical, thermal, optical, and chemical strategies of membrane disruption with a particular emphasis on their applications and challenges to implementation. Throughout, we highlight specific mechanisms of membrane disruption and suggest areas in need of further experimentation. We hope the concepts discussed in our review inspire scientists and engineers with further ideas to improve intracellular delivery.

Changes in optical properties of electroporated cells as revealed by digital holographic microscopy

Changes in optical and shape-related characteristics of B16F10 cells after electroporation were investigated using digital holographic microscopy (DHM). Bipolar rectangular pulses specific for electrochemotherapy were used. Electroporation was performed in an "off-axis" DHM set-up without using exogenous markers. Two types of cell parameters were monitored seconds and minutes after pulse train application: parameters addressing a specifically defined area of the cell (refractive index and cell height) and global cell parameters (projected area, optical phase shift profile and dry mass). The biphasic behavior of cellular parameters was explained by water and mannitol dynamics through the electropermeabilized cell membrane.

Irreversible electroporation ablation area enhanced by synergistic high- and low-voltage pulses

Irreversible electroporation (IRE) produced by a pulsed electric field can ablate tissue. In this study, we achieved an enhancement in ablation area by using a combination of short high-voltage pulses (HVPs) to create a large electroporated area and long low-voltage pulses (LVPs) to ablate the electroporated area. The experiments were conducted in potato tuber slices. Slices were ablated with an array of four pairs of parallel steel electrodes using one of the following four electric pulse protocols: HVP, LVP, synergistic HVP+LVP (SHLVP) or LVP+HVP. Our results showed that the SHLVPs more effectively necrotized tissue than either the HVPs or LVPs, even when the SHLVP dose was the same as or lower than the HVP or LVP doses. The HVP and LVP order mattered and only HVPs+LVPs (SHLVPs) treatments increased the size of the ablation zone because the HVPs created a large electroporated area that was more susceptible to the subsequent LVPs. Real-time temperature change monitoring confirmed that the tissue was non-thermally ablated by the electric pulses. Theoretical calculations of the synergistic effects of the SHLVPs on tissue ablation were performed. Our proposed SHLVP protocol provides options for tissue ablation and may be applied to optimize the current clinical IRE protocols.

Osmotic Effects Induced by Pore-Forming Agent Nystatin: From Lipid Vesicles to the Cell

The responses of Chinese hamster ovary epithelial cells, caused by the pore-forming agent nystatin, were investigated using brightfield and fluorescence microscopy. Different phenomena, i.e., the detachment of cells, the formation of blebs, the occurrence of “cell-vesicles” and cell ruptures, were observed. These phenomena were compared to those discovered in giant lipid vesicles. A theoretical model, based on the osmotic effects that occur due to the size-discriminating nystatin transmembrane pores in lipid vesicles, was extended with a term that considers the conservation of the electric charge density in order to describe the cell’s behavior. The increase of the cellular volume was predicted and correlated with the observed phenomena.

Cell Electrosensitization Exists Only in Certain Electroporation Buffers

Electroporation-induced cell sensitization was described as the occurrence of a delayed hypersensitivity to electric pulses caused by pretreating cells with electric pulses. It was achieved by increasing the duration of the electroporation treatment at the same cumulative energy input. It could be exploited in electroporation-based treatments such as electrochemotherapy and tissue ablation with irreversible electroporation. The mechanisms responsible for cell sensitization, however, have not yet been identified. We investigated cell sensitization dynamics in five different electroporation buffers. We split a pulse train into two trains varying the delay between them and measured the propidium uptake by fluorescence microscopy. By fitting the first-order model to the experimental results, we determined the uptake due to each train (i.e. the first and the second) and the corresponding resealing constant. Cell sensitization was observed in the growth medium but not in other tested buffers. The effect of pulse repetition frequency, cell size change, cytoskeleton disruption and calcium influx do not adequately explain cell sensitization. Based on our results, we can conclude that cell sensitization is a sum of several processes and is buffer dependent. Further research is needed to determine its generality and to identify underlying mechanisms.

Docking and antiherpetic activity of 2-aminobenzo[de]-isoquinoline-1,3-diones

As part of our search for new compounds having antiviral effects, the prepared 2-aminonaphthalimide series was examined for its activity against the herpes simplex viruses HSV-1 and HSV-2. This represents the first study of the antiviral effects of this class of compounds. The new series of 2-amino-1H-benzo[de]isoquinoline-1,3-diones was examined against HSV-1 and HSV-2 using a cytopathic effect inhibition assay. In terms of effective concentration (EC50), furaldehyde, thiophene aldehyde and allyl isothiocyanide derivatives 14‒16 showed potent activity against HSV-1 (EC50 = 19.6, 16.2 and 17.8 μg/mL), compared to acyclovir as a reference drug (EC50 = 1.8 μg/mL). Moreover, 14 and 15 were found to exhibit valuable activity against HSV-2. Many of the tested compounds demonstrated weak to moderate EC50 values relative to their inactive parent compound (2-amino-1H-benzo[de]isoquinoline-1,3-dione), while compounds 7, 9, 13, 14, 15, 16, 21 and 22 were the most active set of antiviral compounds throughout this study. The cytotoxicity (CC50), EC50, and the selectivity index (SI) values were determined. In a molecular docking study, the ligand-receptor interactions of compounds 1-24 and their parent with the HSV-1 thymidine kinase active site were investigated using the Molegro Virtual Docker (MVD) software. Based on the potent anti-HSV properties of the previous naphthalimide condensate products, further exploration of this series of 2-amino-1H-benzo[de]isoquinoline-1,3-diones is warranted.

Modified Adherence Method (MAM) for Electrofusion of Anchorage-Dependent Cells

The artificially induced cell fusion is a useful experimental tool in biology, biotechnology and medicine. The electrofusion is a physical method for cell fusion that applies high-voltage electric pulses. The use of electric pulses causes cell membrane structural changes which bring the cell membrane in the so-called fusogenic state. When such fusogenic membranes are in close contact cell fusion takes place. Physical contact between fusion partners can be achieved by various methods and one of them is modified adherence method (MAM) described in detail here on B16-F1 cell line. The method is based on the fact that living cells form contacts in confluent culture. However, instead of using confluent cell culture, in modified adherence method cells are plated in suitable concentration and allowed to form contacts for only short predetermined period of time. During that time the cells are only slightly attached to the dish surface maintaining the spherical shape. Observed high fusion yields up to 50 % obtained by MAM in situ by dual-color fluorescence microscopy are among the highest in field of electrofusion. The method can be readily adapted to other anchorage-dependent cell lines.

Cytotoxicity evaluation of a new set of 2-aminobenzo[de]iso-quinoline-1,3-diones

A new series of 2-amino-benzo[de]isoquinoline-1,3-diones was synthesized and fully characterized in our previous paper. Here, their cytotoxic effects have been evaluated in vitro in relation to colon HCT-116, hepatocellular Hep-G2 and breast MCF-7 cancer cell lines, using a crystal violet viability assay. The IC₅₀-values of the target compounds are reported in µg/mL, using doxorubicin as a reference drug. The findings revealed that compounds 14, 15, 16, 21 and 22 had significant cytotoxic effects against HCT-116, MCF-7 and Hep-G2 cell lines. Their IC₅₀ values ranged between 1.3 and 8.3 μg/mL in relation to doxorubicin (IC₅₀ ≈ 0.45–0.89 μg/mL). Therefore, these compounds could be used as templates for furthering the development and design of more potent antitumor agents through structural modification.

The role of electrically stimulated endocytosis in gene electrotransfer

Gene electrotransfer is an established method for transfer of genes into cells, however, the mechanism of transfer of DNA across the cell membrane is still not known. Some studies suggest that DNA is translocated through membrane pores while others propose that DNA enters the cell via electro-endocytosis, but no direct observation was performed. In this paper we investigated the second hypothesis. Cells were stained with membrane dye FM 1-43FX, which is used for observation of endocytosis, and then exposed to electric pulses. We analyzed if endocytosis was stimulated by applying electric pulses with intensities below and above the threshold value for gene electrotransfer. No increase in endocytosis from 20 min or even up to 2h after the pulse delivery was observed, regardless of the electric field strength. These observations do not correlate with electrotransfer efficiency, which increases with field strength and is observed only above the threshold value. Our results suggest that electro-endocytosis is not a crucial mechanism for gene electrotransfer and that the hypothesis of DNA entry by translocation through permeabilized membrane is more plausible. The presented results are important for better understanding of the mechanisms of gene electrotransfer and for its optimization for clinical applications.

Antivascular effects of electrochemotherapy: implications in treatment of bleeding metastases

Solid tumors of various etiologies can be treated efficiently by electrochemotherapy (ECT), a combined use of electroporation (EP) and chemotherapeutic drugs, such as bleomycin and cisplatin. EP alone and ECT in particular, induce a profound reduction in tumor blood flow, which contributes to the antitumor effect. After EP and ECT, the time course of blood flow changes and follows the same two-phase pattern. The first rapid and short-lived vasoconstriction phase is followed by the second much longer-lived phase resulting from disrupted cytoskeletal structures and a compromised barrier function of the microvascular endothelium. In the case of ECT, however, tumor vascular endothelial cells are also affected by the chemotherapeutic drug, which leads to irrecoverable damage to tumor vessels and to a further decrease in tumor blood flow within hours after application of ECT. Tumor cells surviving the direct effects of ECT are consequently exposed to lack of oxygen and nutrients and are pushed into the secondary cascade of induced cell death. Clinically, the antitumor effectiveness of ECT has been proven extensively in the treatment of melanoma metastases, with 70-80% complete responses. The antivascular effects of ECT were also exploited for palliative treatment of bleeding melanoma metastases, with immediate cessation of bleeding and very good antitumor effectiveness. The antivascular effect of ECT is of utmost importance for translation of ECT into the treatment of deep-seated tumors, especially in well vascularized organs, such as the liver, where it prevents bleeding of the treated area.

Manipulation of cell volume and membrane pore comparison following single cell permeabilization with 60- and 600-ns electric pulses

Intense nanosecond-duration electric pulses (nsEP) open stable nanopores in the cell membrane, followed by cell volume changes due to water uptake or expulsion, as regulated by the osmolality balance of pore-impermeable solutes inside and outside the cell. The size of pores opened by either fifty 60-ns EP (~13 kV/cm) or five, 600-ns EP (~6 kV/cm) in GH3 cells was estimated by isoosmotic replacement of bath NaCl with polyethylene glycols and sugars. Such replacement reduced cell swelling or resulted in transient or sustained cell shrinking in response to EP. depending on the availability of pores permeable to the test solute. Unexpectedly, solute substitutions showed that for the same integral area of pores opened by 60- and 600-ns treatments (as estimated by cell volume changes), the pore sizes were similar. However, the 600-ns exposure triggered significantly higher cell uptake of propidium. We concluded that 600-ns EP opened a greater number of larger (propidium-permeable pores), but the fraction of the larger pores in the entire pore population was insufficient to contribute to cell volume changes. For both the 60- and 600-ns exposures, cell volume changes were determined by pores smaller than 0.9 nm in diameter; however, the diameter increased with increasing the nsEP intensity.