Retrospective Clinical Study of Allogenic Demineralized Dentin Matrix for Alveolar Bone Repair

The clinical efficacy of the allogenic demineralized dentin matrix graft for implant placement: a systematic review

PURPOSE

The Allogenic Demineralized Dentin Matrix (Allo-DDM) has been introduced as a new grafting material, and several investigations were conducted, showing its efficacy in bone augmentation. The objective of this systematic review was to evaluate the available literature on the Allo-DDM, revealing its clinical performance when used for implant placement procedures.

METHODS

This study is registered in the PROSPERO database (number: CRD42021264885, date: 30/7/2021). Four databases, as well as the grey literature, were searched, selecting human studies where the Allo-DDM was applied to augment implant-recipient sites.

RESULTS

Six articles were included. The total number of implants placed in Allo-DDM-grafted sites was 149. Mean implant stability quotient values (ISQ) were 60.4 and 68.67 for the primary and secondary ISQ, respectively (data from one study). Buccal marginal bone loss around implants was approximately 1.46 mm after 24 months of prosthetic loading (data from one study). Two studies documented a total of 6 cases of dehiscence of the grated area, however, not affecting early implant success. Histological findings from all studies showed new bone formation around the graft particles.

CONCLUSION

A low number of publications are available, presenting only preliminary results, thus the long-term success/survival of implants still needs to be further explored. Moreover, the possibility of bony dehiscence with the use of this material should be investigated. Within these limitations, the Allo-DDM could be a possible alternative to other grafting materials used for bone augmentation and implant placement. Nevertheless, considering this limited evidence, future studies are necessary to confirm this conclusion.

Photocrosslinkable gelatin-treated dentin matrix hydrogel as a novel pulp capping agent for dentin regeneration: I. synthesis, characterizations and grafting optimization

BACKGROUND

In recent years, treated dentin matrix (TDM) has been introduced as a bioactive hydrogel for dentin regeneration in DPC. However, no study has introduced TDM as a photocrosslinkable hydrogel with a natural photoinitiating system. Therefore, the present study aimed to explore the synthesis, characterizations and grafting optimization of injectable gelatin- glycidyl methacrylate (GMA)/TDM hydrogels as a novel photocrosslinkable pulp capping agent for dentin regeneration.

METHODS

G-GMA/TDM hydrogel was photocrosslinked using a new two-component photoinitiating system composed of riboflavin as a photoinitiator under visible light and glycine as a first time coinitiator with riboflavin. The grafting reaction conditions of G-GMA/TDM e.g. GMA concentration and reaction time were optimized. The kinetic parameters e.g. grafting efficiency (GE) and grafting percentage (GP%) were calculated to optimize the grafting reaction, while yield (%) was determined to monitor the formation of the hydrogel. Moreover, G-GMA/TDM hydrogels were characterized by swelling ratio, degradation degree, and cytotoxicity. The instrumental characterizations e.g. FTIR, 1H-NMR, SEM and TGA, were investigated for verifying the grafting reaction. Statistical analysis was performed using F test (ANOVA) and Post Hoc Test (P = 0.05).

RESULTS

The grafting reaction dramatically increased with an increase of both GMA concentration and reaction time. It was realized that the swelling degree and degradation rate of G-GMA/TDM hydrogels were significantly reduced by increasing the GMA concentration and prolonging the reaction time. When compared to the safe low and moderate GMA content hydrogels (0.048, 0.097 M) and shorter reaction times (6, 12, 24 h), G-GMA/TDM with high GMA contents (0.195, 0.391 M) and a prolonged reaction time (48 h) demonstrated cytotoxic effects against cells using the MTT assay. Also, the morphological surface of G-GMA/TDM freeze-dried gels was found more compacted, smooth and uniform due to the grafting process. Significant thermal stability was noticed due to the grafting reaction of G-GMA/TDM throughout the TGA results.

CONCLUSIONS

G-GMA/TDM composite hydrogel formed by the riboflavin/glycine photoinitiating system is a potential bioactive and biocompatible system for in-situ crosslinking the activated-light pulp capping agent for dentin regeneration.

Tissue engineering at the dentin-pulp interface using human treated dentin scaffolds conditioned with DMP1 or BMP2 plasmid DNA-carrying calcium phosphate nanoparticles

Hard dental tissue pathologies, such as caries, are conventionally managed through replacement by tooth-colored inert biomaterials. Tissue engineering provides novel treatment approaches to regenerate lost dental tissues based on bioactive materials and/or signaling molecules. While regeneration in the form of reparative dentin (osteo-dentin) is feasible, the recapitulation of the tubular microstructure of ortho-dentin and its special features is sidelined. This study characterized in vitro, and in vivo human EDTA-treated, freeze-dried dentin matrices (HTFD scaffolds) conditioned with calcium phosphate nanoparticles (NPs) bearing plasmids encoding dentinogenesis-inducing factors (pBMP2/NPs or pDMP1/NPs). The uptake and transfection efficiency of the synthesized NPs on dental pulp stem cells (DPSCs) increased in a concentration- and time-dependent manner, as evaluated qualitatively by confocal laser microscopy and transmission electron microscopy, and quantitatively by flow cytometry, while, in parallel, cell viability decreased. HTFD scaffolds conditioned with the optimal transfectability-to-viability concentration at 4 µg Ca/mL of each of the pBMP2/NPs or pDMP1/NPs preserved high levels of cell viability, evidenced by live/dead staining in vitro and caused no adverse reactions after implantation on C57BL6 mice in vivo. HTFD/NPs constructs induced rapid and pronounced odontogenic shift of the DPSCs, as evidenced by relevant gene expression patterns of RunX2, ALP, BGLAP, BMP-2, DMP-1, DSPP by real-time PCR, and acquirement of polarized meta-mitotic phenotype with cellular protrusions entering the dentinal tubules as visualized by scanning electron microscopy. Taken together, HTFD/NPs constitute a promising tool for customized reconstruction of the ortho-dentin/odontoblastic layer barrier and preservation of pulp vitality. STATEMENT OF SIGNIFICANCE: In clinical dentistry, the most common therapeutic approach for the reconstruction of hard dental tissue defects is the replacement by resin-based restorative materials. Even modern bioactive materials focus on reparative dentinogenesis, leading to amorphous dentin-bridge formation in proximity to the pulp. Therefore, the natural microarchitecture of tubular ortho-dentin is not recapitulated, and the sensory and defensive role of odontoblasts is sidelined. This study approaches the reconstruction at the dentin-pulp interface using a construct of human treated dentin (HTFD) scaffold and plasmid-carrying nanoparticles (NPs) encoding dentinogenic factors (DMP-1 or BMP-2) with excellent in vitro and in vivo properties. As a future perspective, the HTFD/NPs constructs could act as bio-fillings for personalized reconstruction of the dentin-pulp interface.

Impact of Autogenous Demineralized Dentin Matrix on Mandibular Second Molar after Third Molar Extraction: Retrospective Study

The purpose of this retrospective study was to evaluate bone healing after autogenous demineralized dentin matrix (DDM) grafts, focusing on the distal root of the mandibular second molar after the extraction of the third. We included retrospective data from 20 patients who had undergone molar extractions (15 male, 41.9 ± 12.0 years) between January 2020 and September 2022 and had DDM grafts implanted on the extraction socket, immediately ("immediate graft") or 6 weeks ("delayed graft") after the first surgery without primary closure. Patients who underwent grafting on only one side were used as the control group (n = 4). Bone defects at the mandibular second molar were measured preoperatively and 4 months after the graft surgery using cone-beam computed tomography (CBCT). Improvement of bone defect (i.e., the change in the bony defect pre- vs. postoperatively) was compared between the control and graft groups using the Wilcoxon Signed Rank test, and the difference between immediate and delayed grafts was analyzed with the Mann-Whitney U test. Complications such as infections or graft failure did not occur. Although pre-operative defects were smaller in the control than in the graft group (2.98 ± 1.77 and 10.02 ± 3.22 mm, p = 0.001), post-operative defects were similar in both (2.12 ± 0.59 and 2.29 ± 1.67 mm, respectively). The improvement ratio was not statistically significant in the control group (22.68 ± 15.36%) but a difference was observed in the graft group (76.70 ± 15.36%, p = 0.001). The amount of improvement of bone defect was not affected by graft timing or patient sex. In conclusion, DDM can improve bone defect at the distal aspect of the mandibular second molar after third molar extraction.

Demineralized Dentin Matrix for Dental and Alveolar Bone Tissues Regeneration: An Innovative Scope Review

Background:

Dentin is a permeable tubular composite and complex structure, and in weight, it is composed of 20% organic matrix, 10% water, and 70% hydroxyapatite crystalline matrix. Demineralization of dentin with gradient concentrations of ethylene diamine tetraacetic acid, 0.6 N hydrochloric acid, or 2% nitric acid removes a major part of the crystalline apatite and maintains a majority of collagen type I and non-collagenous proteins, which creates an osteoinductive scaffold containing numerous matrix elements and growth factors. Therefore, demineralized dentin should be considered as an excellent naturally-derived bioactive material to enhance dental and alveolar bone tissues regeneration.

Method:

The PubMed and Midline databases were searched in October 2021 for the relevant articles on treated dentin matrix (TDM)/demineralized dentin matrix (DDM) and their potential roles in tissue regeneration.

Results:

Several studies with different study designs evaluating the effect of TDM/DDM on dental and bone tissues regeneration were found. TDM/DDM was obtained from human or animal sources and processed in different forms (particles, liquid extract, hydrogel, and paste) and different shapes (sheets, slices, disc-shaped, root-shaped, and barrier membranes), with variable sizes measured in micrometers or millimeters, demineralized with different protocols regarding the concentration of demineralizing agents and exposure time, and then sterilized and preserved with different techniques. In the act of biomimetic acellular material, TDM/DDM was used for the regeneration of the dentin-pulp complex through direct pulp capping technique, and it was found to possess the ability to activate the odontogenic differentiation of stem cells resident in the pulp tissues and induce reparative dentin formation. TDM/DDM was also considered for alveolar ridge and maxillary sinus floor augmentations, socket preservation, furcation perforation repair, guided bone, and bioroot regenerations as well as bone and cartilage healing.

Conclusion:

To our knowledge, there are no standard procedures to adopt a specific form for a specific purpose; therefore, future studies are required to come up with a well-characterized TDM/DDM for each specific application. Likely as decellularized dermal matrix and prospectively, if the TDM/DDM is supplied in proper consistency, forms, and in different sizes with good biological properties, it can be used efficiently instead of some widely-used regenerative biomaterials.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13770-022-00438-4.

SEM and FT-MIR Analysis of Human Demineralized Dentin Matrix: An In Vitro Study

Recently, the demineralized dentin matrix has been suggested as an alternative material to autologous bone grafts and xenografts for clinical purposes. The aim of this study was to investigate the effect of different times of demineralization on the chemical composition and the surface morphology of dentinal particles. Extracted teeth were ground and divided into 5 groups based on demineralization time (T0 = 0 min, T2 = 2 min, T5 = 5 min, T10 = 10 min, and T60 = 60 min) with 12% EDTA. The analysis was performed using Fourier-Transform Mid-Infrared spectroscopy (FT-MIR) and Scanning Electron Microscopy (SEM) (p < 0.05). The FT-MIR analysis showed a progressive reduction of the concentration of both PO43− and CO32− in the specimens (T0 > T2 > T5 > T10 > T60). On the contrary, the organic (protein) component did not undergo any change. The SEM examination showed that increasing the times of demineralization resulted in a smoother surface of the dentin particles and a higher number of dentinal tubules.

Review of Allogeneic Dentin Graft for Maxillofacial Bone Defects

Although autogenous demineralized dentin matrix (auto-DDM) has shown promising clinical and histological results, it has certain limitations beyond its osteoinductivity and osteoconductivity. Therefore, the application of dentin graft material from other individuals-allogeneic DDM (allo-DDM)-has been considered an alternative to auto-DDM. However, few studies have investigated the osteoinductivity and antigenicity of allo-DDM. Herein, we reviewed all human studies related to allogeneic dentin application for the management of maxillofacial bone defects. Clinical studies have shown the osteoinductivity of allo-DDM in extraskeletal and skeletal sites, regardless of occasional antigenicity. Impact statement Although autogenous demineralized dentin matrix (auto-DDM) has shown promising clinical and histological results, it has certain limitations beyond its proven osteoinductivity and osteoconductivity. Therefore, the application of dentin graft material from other individuals-allogeneic DDM (allo-DDM)-has been considered as an alternative to auto-DDM. However, few studies have investigated the osteoinductivity and antigenicity of allo-DDM. This is the first review of all human studies related to allogeneic dentin grafts for the management of maxillofacial bone defects. Clinical studies have shown the osteoinductivity of allo-DDM in extraskeletal and skeletal sites, regardless of occasional antigenicity.

Dentin-Derived-Barrier Membrane in Guided Bone Regeneration: A Case Report

An autogenous, demineralized, dentin matrix is a well-known osteo-inductive bone substitute that is mostly composed of type I collagen and is widely used in implant dentistry. This single case report describes a successful outcome in guided bone regeneration and dental implantation with a novel human-derived collagen membrane. The authors fabricated a dentin-derived-barrier membrane from a block-type autogenous demineralized dentin matrix to overcome the mechanical instability of the collagen membrane. The dentin-derived-barrier acted as an osteo-inductive collagen membrane with mechanical and clot stabilities, and it replaced the osteo-genetic function of the periosteum. Further research involving large numbers of patients should be conducted to evaluate bone forming capacity in comparison with other collagen membranes.

Tomographic evaluation of direct pulp capping using a novel injectable treated dentin matrix hydrogel: a 2-year randomized controlled clinical trial

OBJECTIVES

To assess clinically and radiographically the success of pulp capping procedure done in traumatically exposed permanent posterior teeth using a novel injectable treated dentin matrix hydrogel (TDMH), Biodentine, and MTA and to evaluate the formed dentin bridge under the capping materials using CBCT imaging.

MATERIALS AND METHODS

45 patients subjected to accidental traumatic pulp exposures by undergraduate dental students are allocated for this study. For each patient, a pulp capping procedure was done. TDMH was formed of TDM powder and sodium alginate to be injected and then hardened in the defect area. Patients were assigned to 3 groups: TDMH, Biodentine, and MTA, respectively, and returned to the clinic after 3, 6, 12, 18, and 24 months for clinical and radiographic examinations. Tomographic data, including thickness and density of formed dentin bridges, were evaluated at the end of the study period compared to the base line. Pulp sensitivity was evaluated throughout the study period using thermal testing and electric pulp tester.

RESULTS

During the follow-up period, all patients were asymptomatic with no clinical signs and symptoms and revealed no radiographic signs of pathosis. However, tomographic evaluation showed the tested materials to have different levels of impact on formed dentin bridges with TDMH group resulted in significantly superior dentin bridges of a higher radiodensity and thickness than Biodentine and MTA.

CONCLUSIONS

TDMH has a greater potential to induce dentin bridge formation than Biodentine and MTA under standardized conditions. Additionally, CBCT imaging was confirmed as a non-invasive and inclusive approach to evaluate the formed dentin bridges after pulp capping procedure.

CLINICAL RELEVANCE

Direct pulp capping can be done successfully with this novel injectable pulp capping material in future clinical applications.

TRIAL REGISTRATION

PACTR201901866476410.

Histological evaluation of the regenerative potential of a novel treated dentin matrix hydrogel in direct pulp capping

OBJECTIVES

To produce a novel injectable treated dentin matrix hydrogel (TDMH) to be used as a novel pulp-capping agent for dentin regeneration compared with Biodentine and MTA.

MATERIALS AND METHODS

Thirty intact fully erupted premolars scheduled to be extracted for orthodontic reasons were included. Pulps were mechanically exposed in the middle of the cavity floor. TDMH was composed of TDM powder (500-μm particle size) and sodium alginate as an injectable scaffold. The capped teeth were divided into three equal groups (n = 10): TDMH, Biodentine, and MTA respectively. Clinical examination and assessment of periapical response were performed. The teeth were extracted after 2-weeks and 2-month intervals, stained with hematoxylin-eosin, and categorized by using a histologic scoring system. Statistical analysis was performed using chi-square and Kruskal-Wallis test (p = 0.05).

RESULTS

All teeth were vital during observation periods. Histological analysis after 2 months showed complete dentin bridge formation and absence of inflammatory pulp response with no significant differences between groups. However, the formed dentin was significantly thicker with the TDMH group with layers of well-arranged odontoblasts that were found to form a homogenous tubular structure with numerous dentinal tubule lines showing a positive trend to dentin regeneration.

CONCLUSIONS

TDMH could achieve dentin regeneration and conservation of pulp vitality and might serve as a feasible natural substitute for silicate-based cements in restoring in vivo dentin defect in direct pulp-capping procedure.

TRIAL REGISTRATION

PACTR201901866476410.

Allogeneic Demineralized Dentin Matrix Graft for Guided Bone Regeneration in Dental Implants

Autogenous and allogeneic demineralized dentin matrices (Auto-DDM and Allo-DDM, respectively) are currently used for guided bone regeneration (GBR). Buccal marginal bone (BMB) resorption is critical for successful implant integration. This study analyzed BMB resorption around dental implants for GBR between the control group (Auto-DDM graft) and experimental group (Allo-DDM graft). From 2014 to 2019, we enrolled 96 patients (59 males, 37 females, average 57.13 years) who received GBR (52 and 44 using Allo-DDM and Auto-DDM, respectively,) without a barrier membrane and a simultaneous single dental implantation (54 in the maxilla and 42 in the mandible). BMB height was measured immediately after GBR, at prosthetic loading, and 12 months after loading. BMB resorption was classified as initial resorption (between GBR and prosthetic loading) and functional resorption (during 12 months after prosthetic loading). The differences in the BMB levels of Auto-DDM and Allo-DDM were analyzed between the initial and functional resorption stages by independent sample t-test. Auto-DDM and Allo-DDM showed similar BMB changes in initial resorption (0.73 ± 0.97 and 0.72 ± 0.77 mm, respectively) and functional resorption (0.69 ± 0.81 and 0.48 ± 0.58 mm, respectively) without a significant difference between the maxilla and mandible. For GBR, Allo-DDM is comparable to Auto-DDM in terms of BMB resorption.

Measurement of hepatitis B virus DNA in fresh versus processed dentin from chronically infected patients

BACKGROUND

Demineralized dentin matrix (DDM) is commonly used as a bone-graft substitute. This study measured and compared human hepatitis B viruses (HBV) DNA in fresh dentin to that of dentin processed into DDM extracted during dental treatment from HBV-infected patients. The hypothesis was that the processing procedure for DDM would inactivate or eliminate HBV in the dentin matrix obtained from infected patients.

METHODS

Dentin from eighteen HBV-infected patients was collected and each dentin specimen was divided into two fragments. One fragment was used before processing as fresh dentin (control group) and the other was processed into DDM (experimental group). DNA was extracted and purified from each fresh and processed dentin specimen and the HBV DNA copy number quantitated by real time polymerase chain reaction. The HBV DNA copy number in the fresh dentin specimens were compared relative to serologic test results. The second parameter was to evaluate the effectiveness of the processing procedure (defatting, demineralization, freeze-drying, and sterilization) to inactivate or eliminate HBV by comparing the DNA copy number in the processed DDM with that in the matched fresh dentin specimens. All results were analyzed using Mann-Whitney U test to compare numerical measurements between groups and differences were considered statistically significant at P-values less than 0.05.

RESULTS

The presence of HBV DNA was detected in 55.56% (10/18) of the fresh dentin specimens. For the ten HBV DNA-positive fresh dentin specimens, HBV DNA was detected in two (20%) of the matched processed dentin specimens. The copy number of HBV DNA in the two positive processed dentin specimens was 1.79 and 4.03, which were statistically lower than that of the fresh dentin specimens (P = 0.0167).

CONCLUSIONS

The results from this study suggested that fresh dentin may be a carrier of HBV and that the procedure used to generate DDM extensively reduced the levels of HBV DNA. Further studies are needed to evaluate the infectivity of HBV in processed dentin.