Fracture resistance of endodontically treated teeth restored with resin post reinforced with glass fiber

Fiber post bonding with beta-tricalcium phosphate incorporated root dentin adhesive. SEM, EDX, FTIR, rheometric and bond strength study

The aim was to formulate an experimental adhesive (EA) and added nanoparticles (NPs) of beta-tricalcium phosphate (β-TCP) to see the impact on pushout bond strength (PBS) and other mechanical properties. Three adhesives were prepared, including EA (control, without β-TCP NPs), 2.5%-β-TCP NPs containing adhesive (2.5%-NPA), and 5% β-TCP NPs containing adhesive (5%-NPA). For the characterization of the NPs, scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy was accomplished. For the adhesive's characterization, rheological assessment, and degree of conversion (DC) analysis were performed. PBS of these adhesives against resin fiber post to root dentin, interfacial failure categories, and resin dentin interface analysis were also assessed. The β-TCP NPs were seen as agglomerated asymmetrical particles on SEM. These NPs were composed primarily of calcium (Ca), and phosphorus (P). Rheological evaluation of the adhesive's showed a drop in the viscosity of all adhesives at greater angular frequencies. The greatest DC was detected for the EA group (67.54 ± 7.9) followed by 2.5%-NPA group (45.32 ± 5.1), whereas the lowest DC values were seen for the 5%-NPA group (38.97 ± 6.5). Concerning PBS, the 2.5%-NPA revealed the highest values at the coronal (12.81 ± 3.0) and middle (8.50 ± 2.3) sections, whereas, for the apical section, the highest PBS values were seen for the 5%-NPA (4.9 ± 1.6). Most of the failures for all adhesive groups were seen at the adhesive-dentin interface (cohesive type failures) for all root segments (coronal, middle, and apical). The resin-dentin interface analysis verified hybrid layer and resin tag formation for all adhesives, but the presence of dispersed β-TCP NPs was only seen in the two NP-reinforced adhesives. The adding of β-TCP NPs in the adhesive could be beneficial as it could improve its PBS. Suitable rheological properties and dentin interaction were also observed for NP-reinforced adhesives. A reduced DC was seen for both β-TCP NP-containing adhesives as compared to the EA. RESEARCH HIGHLIGHTS: Experimental adhesives were reinforced with beta-tricalcium phosphate (β-TCP) nanocrystals. The β-TCP NPs were seen as agglomerated asymmetrical particles on SEM. These NPs were composed primarily of calcium (Ca), and phosphorus (P). β-TCP adhesives demonstrated superior pushout bond strength and a drop in the adhesive viscosity at greater angular frequencies compared to control adhesive. The greatest DC was detected for the EA group followed by 2.5%- β-TCP group, whereas the lowest DC values were for the 5%- β-TCP group.

Fracture Resistance of Molars With Simulated Strip Perforation Repaired With Different Calcium Silicate-Based Cements

Background and aims A root perforation is a connection between the root canal system and the external supportive tissues. Strip perforation (SP), occurring within root canals in a strip, can worsen the prognosis of a treated tooth, reduce its mechanical resistance, and impair the tooth structure. One of the suggested methods to treat SP is to seal it with a bio-material such as calcium silicate cement. Therefore, this in vitro study aimed to assess the molar structure impairment due to SP, which requires studying the fracture resistance, and the ability of mineral trioxide aggregate (MTA), bioceramic, and calcium-enriched mixture (CEM) to repair this perforation. Materials and methods Seventy-five molars were instrumented to size #25 and taper 4%, irrigated with sodium hypochlorite and ethylenediaminetetraacetic acid (EDTA), dried, and then divided randomly into five groups (G1-G5): in G1, root canals were filled with gutta-percha and sealer (negative control sample), whereas the rest of the groups (G2-G5) had a manual simulated SP made with Gates Glidden drill at the mesial root of the extracted molar, and filled with gutta-percha and sealer up to their perforation area; in G2, SP was filled with gutta-percha and sealer (positive control sample); G3 used MTA to repair the SP; G4 used bioceramic putty; and G5 used CEM. Fracture resistance tests of the molars were conducted in the crown-apical direction using a universal testing machine. One-way ANOVA test and Bonferroni test were used to study the significance of the differences in the mean values of the tooth fracture resistance, where statistical significance was set at 0.05. Results The ANOVA test showed that there were statistically significant differences between the fracture resistance (in newtons) values among groups (p = 0.000). The Bonferroni test showed that G2 had a smaller fracture resistance mean than the other four study groups (656.53 N; p = 0.000), and that of G5 was smaller than G1, G3, and G4 (794.40 N, 1083.73 N, 1025.20 N, and 1034.20 N, respectively; p = 0.000 in each pairwise comparison). Conclusion SP reduced the fracture resistance of endodontically treated molars. SP restored using MTA and bioceramic putty was better than that treated with CEM and similar to molars without SP. Moreover, MTA and bioceramic putty enhanced the fracture resistance of endodontically treated teeth to levels similar to molars without SP.

Bond strength and failure mode of glass fiber posts with different surface treatments prior to silanization: An in vitro comparative study

Aim

The use of chemical agents in the surface treatment of glass fiber posts can improve their bond strength to the root canal. The aim of this study was to assess the bond strength and failure mode of glass fiber posts that received different surface treatments prior to silanization.

Materials and Methods

In this cross-sectional and in vitro experimental study, 50 human lower premolar roots were randomly divided into five groups and subsequently prepared to receive the cementation of a fiberglass post prior to silanization. They were distributed as group 1 (with 24% hydrogen peroxide), group 2 (with 37% phosphoric acid), group 3 (with 1.23% acidulated phosphate fluoride for 2 minutes), group 4 (with 1.23% acidulated phosphate fluoride for 6 minutes), and group 5 (without pretreatment). After cementation, the roots were sectioned into two discs for each cervical, middle, and apical region. Bond strength was assessed using the push out technique. Adhesive, mixed, and cohesive failure modes were also assessed. For data analysis, ANOVA and Tukey's post hoc tests were used, as well as Pearson's chi-square test. A significance of P < 0.05 was considered in all statistical analyses.

Results

When comparing the bond strength of root regions, significant differences were obtained in groups pretreated with phosphoric acid (P = 0.018) and acidulated phosphate fluoride for 2 and 6 minutes (P = 0.001 and P = 0.000, respectively). Furthermore, significant differences were obtained between posts treated only with silane and those that received phosphoric acid pretreatment (P = 0.006) and acidulated phosphate fluoride for 6 minutes (P = 0.001). Significant association of mixed failure mode was observed with hydrogen peroxide (P = 0.014) and phosphoric acid (P = 0.006) pretreatments. Cohesive failure was significantly associated with acidulated phosphate fluoride pretreatment for 2 minutes (P = 0.032) and with posts that did not receive treatment prior to silanization (P = 0.000).

Conclusion

Posts treated only with silane and pretreated with hydrogen peroxide and acidulated phosphate fluoride for 2 minutes presented significantly higher bond strength with respect to those pretreated with phosphoric acid and acidulated phosphate fluoride for 6 minutes. However, acidulated phosphate fluoride for 2 minutes and silane were associated with a better bonding type.