Genome-enabled prediction of indicator traits of resistance to gastrointestinal nematodes in sheep using parametric models and artificial neural networks

This study aimed to assess the predictive ability of parametric models and artificial neural network method for genomic prediction of the following indicator traits of resistance to gastrointestinal nematodes in Santa Inês sheep: packed cell volume (PCV), fecal egg count (FEC), and Famacha© method (FAM). After quality control, the number of genotyped animals was 551 (PCV), 548 (FEC), and 565 (FAM), and 41,676 SNP. The average prediction accuracy (ACC) calculated by Pearson correlation between observed and predicted values and mean squared errors (MSE) were obtained using genomic best unbiased linear predictor (GBLUP), BayesA, BayesB, Bayesian least absolute shrinkage and selection operator (BLASSO), and Bayesian regularized artificial neural network (three and four hidden neurons, BRANN_3 and BRANN_4, respectively) in a 5-fold cross-validation technique. The average ACC varied from moderate to high according to the trait and models, ranging between 0.418 and 0.546 (PCV), between 0.646 and 0.793 (FEC), and between 0.414 and 0.519 (FAM). Parametric models presented nearly the same ACC and MSE for the studied traits and provided better accuracies than BRANN. The GBLUP, BayesA, BayesB and BLASSO models provided better accuracies than the BRANN_3 method, increasing by around 23% for PCV, and 18.5% for FEC. In conclusion, parametric models are suitable for genome-enabled prediction of indicator traits of resistance to gastrointestinal nematodes in sheep. Due to the small differences in accuracy found between them, the use of the GBLUP model is recommended due to its lower computational costs.

A multi-omics analysis identifies molecular features associated with fertility in heifers (Bos taurus)

Infertility or subfertility is a critical barrier to sustainable cattle production, including in heifers. The development of heifers that do not produce a calf within an optimum window of time is a critical factor for the profitability and sustainability of the cattle industry. In parallel, heifers are an excellent biomedical model for understanding the underlying etiology of infertility because well-nourished heifers can still be infertile, mostly because of inherent physiological and genetic causes. Using a high-density single nucleotide polymorphism (SNP) chip, we collected genotypic data, which were analyzed using an association analysis in PLINK with Fisher's exact test. We also produced quantitative transcriptome data and proteome data. Transcriptome data were analyzed using the quasi-likelihood test followed by the Wald's test, and the likelihood test and proteome data were analyzed using a generalized mixed model and Student's t-test. We identified two SNPs significantly associated with heifer fertility (rs110918927, chr12: 85648422, P = 6.7 × 10-7; and rs109366560, chr11:37666527, P = 2.6 × 10-5). We identified two genes with differential transcript abundance (eFDR ≤ 0.002) between the two groups (Fertile and Sub-Fertile): Adipocyte Plasma Membrane Associated Protein (APMAP, 1.16 greater abundance in the Fertile group) and Dynein Axonemal Intermediate Chain 7 (DNAI7, 1.23 greater abundance in the Sub-Fertile group). Our analysis revealed that the protein Alpha-ketoglutarate-dependent dioxygenase FTO was more abundant in the plasma collected from Fertile heifers relative to their Sub-Fertile counterparts (FDR < 0.05). Lastly, an integrative analysis of the three datasets identified a series of molecular features (SNPs, gene transcripts, and proteins) that discriminated 21 out of 22 heifers correctly based on their fertility category. Our multi-omics analyses confirm the complex nature of female fertility. Very importantly, our results also highlight differences in the molecular profile of heifers associated with fertility that transcend the constraints of breed-specific genetic background.

Dimensionality of genomic information and its impact on genome-wide associations and variant selection for genomic prediction: a simulation study

BACKGROUND

Identifying true positive variants in genome-wide associations (GWA) depends on several factors, including the number of genotyped individuals. The limited dimensionality of genomic information may give insights into the optimal number of individuals to be used in GWA. This study investigated different discovery set sizes based on the number of largest eigenvalues explaining a certain proportion of variance in the genomic relationship matrix (G). In addition, we investigated the impact on the prediction accuracy by adding variants, which were selected based on different set sizes, to the regular single nucleotide polymorphism (SNP) chips used for genomic prediction.

METHODS

We simulated sequence data that included 500k SNPs with 200 or 2000 quantitative trait nucleotides (QTN). A regular 50k panel included one in every ten simulated SNPs. Effective population size (Ne) was set to 20 or 200. GWA were performed using a number of genotyped animals equivalent to the number of largest eigenvalues of G (EIG) explaining 50, 60, 70, 80, 90, 95, 98, and 99% of the variance. In addition, the largest discovery set consisted of 30k genotyped animals. Limited or extensive phenotypic information was mimicked by changing the trait heritability. Significant and large-effect size SNPs were added to the 50k panel and used for single-step genomic best linear unbiased prediction (ssGBLUP).

RESULTS

Using a number of genotyped animals corresponding to at least EIG98 allowed the identification of QTN with the largest effect sizes when Ne was large. Populations with smaller Ne required more than EIG98. Furthermore, including genotyped animals with a higher reliability (i.e., a higher trait heritability) improved the identification of the most informative QTN. Prediction accuracy was highest when the significant or the large-effect SNPs representing twice the number of simulated QTN were added to the 50k panel.

CONCLUSIONS

Accurately identifying causative variants from sequence data depends on the effective population size and, therefore, on the dimensionality of genomic information. This dimensionality can help identify the most suitable sample size for GWA and could be considered for variant selection, especially when resources are restricted. Even when variants are accurately identified, their inclusion in prediction models has limited benefits.

Nonparallel genome changes within subpopulations over time contributed to genetic diversity within the US Holstein population

Maintaining genetic variation in a population is important for long-term genetic gain. The existence of subpopulations within a breed helps maintain genetic variation and diversity. The 20,990 genotyped animals, representing the breeding animals in the year 2014, were identified as the sires of animals born after 2010 with at least 25 progenies, and females measured for type traits within the last 2 yr of data. K-means clustering with 5 clusters (C1, C2, C3, C4, and C5) was applied to the genomic relationship matrix based on 58,990 SNP markers to stratify the selected candidates into subpopulations. The general higher inbreeding resulting from within-cluster mating than across-cluster mating suggests the successful stratification into genetically different groups. The largest cluster (C4) contained animals that were less related to each animal within and across clusters. The average fixation index was 0.03, indicating that the populations were differentiated, and allele differences across the subpopulations were not due to drift alone. Starting with the selected candidates within each cluster, a family unit was identified by tracing back through the pedigree, identifying the genotyped ancestors, and assigning them to a pseudogeneration. Each of the 5 families (F1, F2, F3, F4, and F5) was traced back for 10 generations, allowing for changes in frequency of individual SNPs over time to be observed, which we call allele frequencies change. Alternative procedures were used to identify SNPs changing in a parallel or nonparallel way across families. For example, markers that have changed the most in the whole population, markers that have changed differently across families, and genes previously identified as those that have changed in allele frequency. The genomic trajectory taken by each family involves selective sweeps, polygenic changes, hitchhiking, and epistasis. The replicate frequency spectrum was used to measure the similarity of change across families and showed that populations have changed differently. The proportion of markers that reversed direction in allele frequency change varied from 0.00 to 0.02 if the rate of change was greater than 0.02 per generation, or from 0.14 to 0.24 if the rate of change was greater than 0.005 per generation within each family. Cluster-specific SNP effects for stature were estimated using only females and applied to obtain indirect genomic predictions for males. Reranking occurs depending on SNP effects used. Additive genetic correlations between clusters show possible differences in populations. Further research is required to determine how this knowledge can be applied to maintain diversity and optimize selection decisions in the future.

Infrared Predictions Are a Valuable Alternative to Actual Measures of Dry-Cured Ham Weight Loss in the Training of Genome-Enabled Prediction Models

Selection to reduce ham weight losses during dry-curing (WL) requires individual traceability of hams throughout dry-curing, with high phenotyping costs and long generation intervals. Infrared spectroscopy enables cost-effective, high-throughput phenotyping for WL 24 h after slaughter. Direct genomic values (DGV) of crossbred pigs and their purebred sires were estimated, for observed (OB) and infrared-predicted WL (IR), through models developed from 640 and 956 crossbred pigs, respectively. Five Bayesian models and two pseudo-phenotypes (estimated breeding value, EBV, and adjusted phenotype) were tested in random cross-validation and leave-one-family-out validation. The use of EBV as pseudo-phenotypes resulted in the highest accuracies. Accuracies in leave-one-family-out validation were much lower than those obtained in random cross-validation but still satisfactory and very similar for both traits. For sires in the leave-one-family-out validation scenario, the correlation between the DGV for IR and EBV for OB was slightly lower (0.32) than the correlation between the DGV for OB and EBV for OB (0.38). While genomic prediction of OB and IR can be equally suggested to be incorporated in future selection programs aiming at reducing WL, the use of IR enables an early, cost-effective phenotyping, favoring the construction of larger reference populations, with accuracies comparable to those achievable using OB phenotype.

The accuracy of genomic prediction for meat quality traits in Hanwoo cattle when using genotypes from different SNP densities and preselected variants from imputed whole genome sequence

Context Genomic prediction is the use of genomic data in the estimation of genomic breeding values (GEBV) in animal breeding. In beef cattle breeding programs, genomic prediction increases the rates of genetic gain by increasing the accuracy of selection at earlier ages. Aims The objectives of the study were to examine the effect of single-nucleotide polymorphism (SNP) density and to evaluate the effect of using SNPs preselected from imputed whole-genome sequence for genomic prediction. Methods Genomic and phenotypic data from 2110 Hanwoo steers were used to predict GEBV for marbling score (MS), meat texture (MT), and meat colour (MC) traits. Three types of SNP densities including 50k, high-density (HD), and whole-genome sequence data and preselected SNPs from genome-wide association study (GWAS) were used for genomic prediction analyses. Two scenarios (independent and dependent discovery populations) were used to select top significant SNPs. The accuracy of GEBV was assessed using random cross-validation. Genomic best linear unbiased prediction (GBLUP) was used to predict the breeding values for each trait. Key results Our result showed that very similar prediction accuracies were observed across all SNP densities used in the study. The prediction accuracy among traits ranged from 0.29±0.05 for MC to 0.46±0.04 for MS. Depending on the studied traits, up to 5% of prediction accuracy improvement was obtained when the preselected SNPs from GWAS analysis were included in the prediction analysis. Conclusions High SNP density such as HD and the whole-genome sequence data yielded a similar prediction accuracy in Hanwoo beef cattle. Therefore, the 50K SNP chip panel is sufficient to capture the relationships in a breed with a small effective population size such as the Hanwoo cattle population. Preselected variants improved prediction accuracy when they were included in the genomic prediction model. Implications The estimated genomic prediction accuracies are moderately accurate in Hanwoo cattle and for searching for SNPs that are more productive could increase the accuracy of estimated breeding values for the studied traits.

Selection criteria for feed efficiency-related traits and their association with growth, reproductive and carcass traits in Nelore cattle

Context Livestock feed costs have a higher impact on the profitability of beef production systems and are directly related to feed efficiency. However, these traits are hard and have high costs to measure, reducing the availability of phenotypic records and reliability of genetic evaluations. Thus, the use of genomic information can increase the robustness of genetic studies that address them. Aims The aim of the present study was to estimate genetic parameters for feed efficiency, growth, reproductive and carcass traits in Nelore cattle and the correlated response among them, using genomic information. Methods Residual feed intake (RFI), dry-matter intake, feed conversion ratio, feed efficiency (FE), residual average daily gain (RG), residual feed intake and average daily gain (RIG), birthweight, weight at 120, 240, 365 and 450 days of age, scrotal circumference at 365 and 450 days of age, rib-eye area, backfat thickness and rump fat thickness were evaluated. The genetic parameters were estimated using the single-step genomic best linear unbiased prediction approach. Key results The FE-related traits showed low to moderate heritability ranging from 0.07 to 0.23. Feed efficiency-related traits showed low genetic correlations with reproductive (–0.24 to 0.27), carcass (–0.17 to 0.27) and growth (–0.19 to 0.24) traits, except for growth with dry-matter intake (0.32–0.56) and weight at 365 days of age with FE (–0.40). Conclusions The selection to improve growth, reproductive and carcass traits would not change RFI, RG and RIG. The choice of the most adequate selection criterion depends on the production system, that is, RFI might be used for low-input beef cattle systems, and RIG would be used for more intensive and without-any-dietary-restrictions beef cattle systems. Implications The estimates of heritability and genetic correlations suggest that genetic selection for feed efficiency using RFI, RG and RIG in Nellore cattle leads to higher genetic gain than does that using FE and feed conversion ratio without affecting other profitability traits.

Development of Angus SteerSELECT: a genomic-based tool to identify performance differences of Australian Angus steers during feedlot finishing: Phase 1 validation

Context Genomic-based technologies are allowing commercial beef producers to predict the genetic merit of individual animals of unknown pedigree with increased ease and accuracy. Genomic selection tools that can accurately predict the feedlot and carcass performance of steers have the potential to improve profitability for the beef supply chain. Aims To validate the ability of the Angus SteerSELECT genomic product to predict differences in performance of Australian Angus steers, in terms of carcass weight, marbling score, ossification score and carcass value, using a short-fed (100 days) or long-fed (270 days) finishing protocol at a commercial feedlot. Methods A reference population of 2763 Australian Angus steers was used to generate genomic prediction equations for three carcass traits, namely, carcass weight, marbling score and ossification. The accuracy and bias of genomic predictions of breeding values were then evaluated using a validation population of 522 Angus steers, either short- or long-fed at a commercial feedlot, by comparing breeding values to measured phenotypes. The potential economic benefits for feedlot operators when using Angus SteerSELECT were estimated on the basis of the ability of the tool to predict the carcass value of steers in the validation population. Key results The accuracy of genomic predictions of breeding values for carcass weight, marbling score and ossification score were 0.752, 0.723 and 0.734 respectively. When steers were ranked in quartiles for predicted carcass value, calculated using genomic predictions of breeding values for carcass weight and marbling score, the least-square mean carcass value for steers in each quartile, from bottom 25% predicted performers to top 25% predicted performers, were estimated at A$1794, A$1977, A$2021 and A$2148 for short-fed steers and A$3546, A$3780, A$3864 and A$4258 for long-fed steers. Differences in the carcass value least-squares mean between the bottom and top quartile were highly significant (P &lt; 0.001) for both short-fed and long-fed steers. Conclusions Genomic prediction equations used in Angus SteerSELECT can predict differences in carcass weight, marbling score, ossification score and carcass value in both short-fed and long-fed Australian Angus steers. Implications Genomic selection tools that can predict differences in performance, in terms of growth and carcass characteristics, of commercial feedlot cattle have the potential to significantly increase profitability for the beef supply chain by improving the quality and consistency of the beef products they produce.

Genomic prediction ability for feed efficiency traits using different models and pseudo-phenotypes under several validation strategies in Nelore cattle

There is a growing interest to improve feed efficiency (FE) traits in cattle. The genomic selection was proposed to improve these traits since they are difficult and expensive to measure. Up to date, there are scarce studies about the implementation of genomic selection for FE traits in indicine cattle under different scenarios of pseudo-phenotypes, models, and validation strategies on a commercial large scale. Thus, the aim was to evaluate the feasibility of genomic selection implementation for FE traits in Nelore cattle applying different models and pseudo-phenotypes under validation strategies. Phenotypic and genotypic information from 4 329 and 3 467 animals were used, respectively, which were tested for residual feed intake, DM intake, feed efficiency, feed conversion ratio, residual BW gain, and residual intake and BW gain. Six prediction methods were used: single-step genomic best linear unbiased prediction, Bayes A, Bayes B, Bayes Cπ, Bayesian least absolute shrinkage and selection operator (BLASSO), and Bayes R. Phenotypes adjusted for fixed effects (Y*), estimated breeding value (EBV), and EBV deregressed (DEBV) were used as pseudo-phenotypes. The validation approaches used were: (1) random: the data was randomly divided into ten subsets and the validation was done in each subset at a time; (2) age: the partition into training and testing sets was based on year of birth and testing animals were born after 2016; and (3) EBV accuracy: the data was split into two groups, being animals with accuracy above 0.45 the training set; and below 0.45 the validation set. In the analyses that used the Y* as pseudo-phenotype, prediction ability (PA) was obtained by dividing the correlation between pseudo-phenotype and genomic EBV (GEBV) by the square root of the heritability of the trait. When EBV and DEBV were used as the pseudo-phenotype, the simple correlation of this quantity with the GEBV was considered as PA. The prediction methods show similar results for PA and bias. The random cross-validation presented higher PA (0.17) than EBV accuracy (0.14) and age (0.13). The PA was higher for Y* than for EBV and DEBV (30.0 and 34.3%, respectively). Random validation presented the highest PA, being indicated for use in populations composed mainly of young animals and traits with few generations of data recording. For high heritability traits, the validation can be done by age, enabling the prediction of the next-generation genetic merit. These results would support breeders to identify genomic approaches that are more viable for genomic prediction for FE-related traits.

Rewiring of gene expression in circulating white blood cells is associated with pregnancy outcome in heifers (Bos taurus)

Infertility is a challenging phenomenon in cattle that reduces the sustainability of beef production worldwide. Here, we tested the hypothesis that gene expression profiles of protein-coding genes expressed in peripheral white blood cells (PWBCs), and circulating micro RNAs in plasma, are associated with female fertility, measured by pregnancy outcome. We drew blood samples from 17 heifers on the day of artificial insemination and analyzed transcript abundance for 10,496 genes in PWBCs and 290 circulating micro RNAs. The females were later classified as pregnant to artificial insemination, pregnant to natural breeding or not pregnant. We identified 1860 genes producing significant differential coexpression (eFDR < 0.002) based on pregnancy outcome. Additionally, 237 micro RNAs and 2274 genes in PWBCs presented differential coexpression based on pregnancy outcome. Furthermore, using a machine learning prediction algorithm we detected a subset of genes whose abundance could be used for blind categorization of pregnancy outcome. Our results provide strong evidence that transcript abundance in circulating white blood cells is associated with fertility in heifers.

Beef heifer fertility: importance of management practices and technological advancements

The development of replacement heifers is at the core of cow-calf beef production systems. In 2020, the USDA, National Agricultural Statistics Service reported 5.771 million beef heifers, 500 pounds and over, are under development for cow replacement. A compilation of data from several studies indicate that between 85% and 95% of these heifers will become pregnant in their first breeding season. Several thousands of heifers being raised for replacement may not deliver a calf on their first breeding season and result in economic losses to cow-calf producers. Many management procedures have been developed to maximize the reproductive potential of beef heifers. Such approaches include, but are not limited to the following: nutritional management for controlled weight gain, identification of reproductive maturity by physiological and morphological indicators, and the implementation of an estrous synchronization program. The implementation of management strategies has important positive impact(s) on the reproductive efficiency of heifers. There are limitations, however, because some heifers deemed ready to enter their first breeding season do not become pregnant. In parallel, genetic selection for fertility-related traits in beef heifers have not promoted major genetic gains on this particular area, most likely due to low heritability of female fertility traits in cattle. Technologies such as antral follicle counting, DNA genotyping and RNA profiling are being investigated as a means to aid in the identification of heifers of low fertility potential. To date, many polymorphisms have been associated with heifer fertility, but no DNA markers have been identified across herds. Antral follicle count is an indication of the ovarian reserve and is an indicator of the reproductive health of a heifer. We have been working on the identification of transcriptome profiles in heifers associated with pregnancy outcome. Our current investigations integrating protein-coding transcript abundance and artificial intelligence have identified the potential for bloodborne transcript abundance to be used as indicators of fertility potential in beef heifers. In summary, there is an ongoing pressure for reducing costs and increasing efficiency in cow-calf production systems, and new technologies can help reduce the long-standing limitations in beef heifer fertility.

Use of gene expression and whole-genome sequence information to improve the accuracy of genomic prediction for carcass traits in Hanwoo cattle

Background

In this study, we assessed the accuracy of genomic prediction for carcass weight (CWT), marbling score (MS), eye muscle area (EMA) and back fat thickness (BFT) in Hanwoo cattle when using genomic best linear unbiased prediction (GBLUP), weighted GBLUP (wGBLUP), and a BayesR model. For these models, we investigated the potential gain from using pre-selected single nucleotide polymorphisms (SNPs) from a genome-wide association study (GWAS) on imputed sequence data and from gene expression information. We used data on 13,717 animals with carcass phenotypes and imputed sequence genotypes that were split in an independent GWAS discovery set of varying size and a remaining set for validation of prediction. Expression data were used from a Hanwoo gene expression experiment based on 45 animals.

Results

Using a larger number of animals in the reference set increased the accuracy of genomic prediction whereas a larger independent GWAS discovery dataset improved identification of predictive SNPs. Using pre-selected SNPs from GWAS in GBLUP improved accuracy of prediction by 0.02 for EMA and up to 0.05 for BFT, CWT, and MS, compared to a 50 k standard SNP array that gave accuracies of 0.50, 0.47, 0.58, and 0.47, respectively. Accuracy of prediction of BFT and CWT increased when BayesR was applied with the 50 k SNP array (0.02 and 0.03, respectively) and was further improved by combining the 50 k array with the top-SNPs (0.06 and 0.04, respectively). By contrast, using BayesR resulted in limited improvement for EMA and MS. wGBLUP did not improve accuracy but increased prediction bias. Based on the RNA-seq experiment, we identified informative expression quantitative trait loci, which, when used in GBLUP, improved the accuracy of prediction slightly, i.e. between 0.01 and 0.02. SNPs that were located in genes, the expression of which was associated with differences in trait phenotype, did not contribute to a higher prediction accuracy.

Conclusions

Our results show that, in Hanwoo beef cattle, when SNPs are pre-selected from GWAS on imputed sequence data, the accuracy of prediction improves only slightly whereas the contribution of SNPs that are selected based on gene expression is not significant. The benefit of statistical models to prioritize selected SNPs for estimating genomic breeding values is trait-specific and depends on the genetic architecture of each trait.

Genomic Analysis Using Bayesian Methods under Different Genotyping Platforms in Korean Duroc Pigs

Simple Summary

This study investigated the informative regions and the efficiency of genomic predictions for backfat thickness, days to 90 kg body weight, loin muscle area, and lean percentage in Korean Duroc pigs. The several regions of the genome were identified and a significant marker was found near the MC4R gene for growth and production-related traits. No differences in genomic accuracy were identified on the basis of the Bayesian approaches in these four growth and production-related traits. The genomic accuracy is improved by using deregressed estimated breeding values including parental information as a response variable in Korean Duroc pigs.

Abstract

Genomic evaluation has been widely applied to several species using commercial single nucleotide polymorphism (SNP) genotyping platforms. This study investigated the informative genomic regions and the efficiency of genomic prediction by using two Bayesian approaches (BayesB and BayesC) under two moderate-density SNP genotyping panels in Korean Duroc pigs. Growth and production records of 1026 individuals were genotyped using two medium-density, SNP genotyping platforms: Illumina60K and GeneSeek80K. These platforms consisted of 61,565 and 68,528 SNP markers, respectively. The deregressed estimated breeding values (DEBVs) derived from estimated breeding values (EBVs) and their reliabilities were taken as response variables. Two Bayesian approaches were implemented to perform the genome-wide association study (GWAS) and genomic prediction. Multiple significant regions for days to 90 kg (DAYS), lean muscle area (LMA), and lean percent (PCL) were detected. The most significant SNP marker, located near the MC4R gene, was detected using GeneSeek80K. Accuracy of genomic predictions was higher using the GeneSeek80K SNP panel for DAYS (Δ2%) and LMA (Δ2–3%) with two response variables, with no gains in accuracy by the Bayesian approaches in four growth and production-related traits. Genomic prediction is best derived from DEBVs including parental information as a response variable between two DEBVs regardless of the genotyping platform and the Bayesian method for genomic prediction accuracy in Korean Duroc pig breeding.

The impact of clustering methods for cross-validation, choice of phenotypes, and genotyping strategies on the accuracy of genomic predictions

For genomic predictors to be of use in genetic evaluation, their predicted accuracy must be a reliable indicator of their utility, and thus unbiased. The objective of this paper was to evaluate the accuracy of prediction of genomic breeding values (GBV) using different clustering strategies and response variables. Red Angus genotypes (n = 9,763) were imputed to a reference 50K panel. The influence of clustering method [k-means, k-medoids, principal component (PC) analysis on the numerator relationship matrix (A) and the identical-by-state genomic relationship matrix (G) as both data and covariance matrices, and random] and response variables [deregressed estimated breeding values (DEBV) and adjusted phenotypes] were evaluated for cross-validation. The GBV were estimated using a Bayes C model for all traits. Traits for DEBV included birth weight (BWT), marbling (MARB), rib-eye area (REA), and yearling weight (YWT). Adjusted phenotypes included BWT, YWT, and ultrasonically measured intramuscular fat percentage and REA. Prediction accuracies were estimated using the genetic correlation between GBV and associated response variable using a bivariate animal model. A simulation mimicking a cattle population, replicated 5 times, was conducted to quantify differences between true and estimated accuracies. The simulation used the same clustering methods and response variables, with the addition of 2 genotyping strategies (random and top 25% of individuals), and forward validation. The prediction accuracies were estimated similarly, and true accuracies were estimated as the correlation between the residuals of a bivariate model including true breeding value (TBV) and GBV. Using the adjusted Rand index, random clusters were clearly different from relationship-based clustering methods. In both real and simulated data, random clustering consistently led to the largest estimates of accuracy, while no method was consistently associated with more or less bias than other methods. In simulation, random genotyping led to higher estimated accuracies than selection of the top 25% of individuals. Interestingly, random genotyping seemed to overpredict true accuracy while selective genotyping tended to underpredict accuracy. When forward in time validation was used, DEBV led to less biased estimates of GBV accuracy. Results suggest the highest, least biased GBV accuracies are associated with random genotyping and DEBV.

Genomic prediction using different estimation methodology, blending and cross-validation techniques for growth traits and visual scores in Hereford and Braford cattle

The objective of the present study was to evaluate the accuracy and bias of direct and blended genomic predictions using different methods and cross-validation techniques for growth traits (weight and weight gains) and visual scores (conformation, precocity, muscling, and size) obtained at weaning and at yearling in Hereford and Braford breeds. Phenotypic data contained 126,290 animals belonging to the Delta G Connection genetic improvement program, and a set of 3,545 animals genotyped with the 50K chip and 131 sires with the 777K. After quality control, 41,045 markers remained for all animals. An animal model was used to estimate (co)variance components and to predict breeding values, which were later used to calculate the deregressed estimated breeding values (DEBV). Animals with genotype and phenotype for the traits studied were divided into 4 or 5 groups by random and k-means clustering cross-validation strategies. The values of accuracy of the direct genomic values (DGV) were moderate to high magnitude for at weaning and at yearling traits, ranging from 0.19 to 0.45 for the k-means and 0.23 to 0.78 for random clustering among all traits. The greatest gain in relation to the pedigree BLUP (PBLUP) was 9.5% with the BayesB method with both the k-means and the random clustering. Blended genomic value accuracies ranged from 0.19 to 0.56 for k-means and from 0.21 to 0.82 for random clustering. The analyses using the historical pedigree and phenotypes contributed additional information to calculate the GEBV, and in general, the largest gains were for the single-step (ssGBLUP) method in bivariate analyses with a mean increase of 43.00% among all traits measured at weaning and of 46.27% for those evaluated at yearling. The accuracy values for the marker effects estimation methods were lower for k-means clustering, indicating that the training set relationship to the selection candidates is a major factor affecting accuracy of genomic predictions. The gains in accuracy obtained with genomic blending methods, mainly ssGBLUP in bivariate analyses, indicate that genomic predictions should be used as a tool to improve genetic gains in relation to the traditional PBLUP selection.

A comprehensive comparison between single- and two-step GBLUP methods in a simulated beef cattle population

The statistical methods used in the genetic evaluations are a key component of the process and can be best compared by using simulated data. The latter is especially true in grazing beef cattle production systems, where the number of proven bulls with highly reliable estimated breeding values is limited to allow for a trustworthy validation of genomic predictions. Therefore, we simulated data for 4980 beef cattle aiming to compare single-step genomic best linear unbiased prediction (ssGBLUP), which simultaneously incorporates pedigree, phenotypic, and genomic data into genomic evaluations, and two-step GBLUP (tsGBLUP) procedures and genomic estimated breeding values (GEBVs) blending methods. The greatest increases in GEBV accuracies compared with the parents’ average estimated breeding values (EBVPA) were 0.364 and 0.341 for ssGBLUP and tsGBLUP, respectively. Direct genomic value and GEBV accuracies when using ssGBLUP and tsGBLUP procedures were similar, except for the GEBV accuracies using Hayes’ blending method in tsGBLUP. There was no significant or slight bias in genomic predictions from ssGBLUP or tsGBLUP (using VanRaden’s blending method), indicating that these predictions are on the same scale compared with the true breeding values. Overall, genetic evaluations including genomic information resulted in gains in accuracy >100% compared with the EBVPA. In addition, there were no significant differences between the selected animals (10% males and 50% females) by using ssGBLUP or tsGBLUP.

Genomic prediction of continuous and binary fertility traits of females in a composite beef cattle breed

Reproduction efficiency is a major factor in the profitability of the beef cattle industry. Genomic selection (GS) is a promising tool that may improve the predictive accuracy and genetic gain of fertility traits. There is a wide range of traits used to measure fertility in dairy and beef cattle including continuous (days open), discrete (pregnancy status), and count (number of inseminations) responses. In this study, a joint analysis of age of puberty (AOP), age at first calving (AOC), and the heifer pregnancy status (HPS) was performed. Data used in this study consisted of records from 1,365 Composite Gene Combination (CGC; 50% Red Angus, 25% Charolais, 25% Tarentaise) first parity females born between 2002 and 2011. The pedigree file included 5,374 animals. A total of 3,902 animals were genotyped with different density SNP chips (3K to 50K SNP). Animals genotyped with low-density arrays were imputed to higher density (BovineSNP50 BeadChip) using FImpute. Data were analyzed using univariate and multivariate classical quantitative models (pedigree based) and univariate genomic approaches. For the latter, 3 different Bayesian methods (BayesA, BayesB, and BayesCπ) were implemented and compared. Estimates of heritabilities using univariate and multivariate analyses based on pedigree relationships ranged between 0.03 (for AOC) to 0.2 (AOP). Heritability of pregnancy status was 0.15 and 0.09 using the univariate and multivariate analyses, respectively. Genetic correlation between pregnancy status and the other 2 traits was low being 0.08 with age at puberty and -0.10 with age at first calving. Heritability estimates were slightly higher using genomic rather than average additive relationships. The accuracy of genomic prediction was similar across the 3 Bayesian methods with higher accuracies for age of puberty than the age at first calving likely due to the higher heritability of the former. The prediction of the binary pregnancy status measured using the area under the curve increased by 27% to 29% compared to a random classifier. Due to the small size of the data, all estimates have large posterior standard deviations and results should be interpreted with caution.

Improving accuracy of genomic prediction in Brangus cattle by adding animals with imputed low-density SNP genotypes

Reliable genomic prediction of breeding values for quantitative traits requires the availability of sufficient number of animals with genotypes and phenotypes in the training set. As of 31 October 2016, there were 3,797 Brangus animals with genotypes and phenotypes. These Brangus animals were genotyped using different commercial SNP chips. Of them, the largest group consisted of 1,535 animals genotyped by the GGP-LDV4 SNP chip. The remaining 2,262 genotypes were imputed to the SNP content of the GGP-LDV4 chip, so that the number of animals available for training the genomic prediction models was more than doubled. The present study showed that the pooling of animals with both original or imputed 40K SNP genotypes substantially increased genomic prediction accuracies on the ten traits. By supplementing imputed genotypes, the relative gains in genomic prediction accuracies on estimated breeding values (EBV) were from 12.60% to 31.27%, and the relative gain in genomic prediction accuracies on de-regressed EBV was slightly small (i.e. 0.87%-18.75%). The present study also compared the performance of five genomic prediction models and two cross-validation methods. The five genomic models predicted EBV and de-regressed EBV of the ten traits similarly well. Of the two cross-validation methods, leave-one-out cross-validation maximized the number of animals at the stage of training for genomic prediction. Genomic prediction accuracy (GPA) on the ten quantitative traits was validated in 1,106 newly genotyped Brangus animals based on the SNP effects estimated in the previous set of 3,797 Brangus animals, and they were slightly lower than GPA in the original data. The present study was the first to leverage currently available genotype and phenotype resources in order to harness genomic prediction in Brangus beef cattle.

Candidate genes for male and female reproductive traits in Canchim beef cattle

Background

Beef cattle breeding programs in Brazil have placed greater emphasis on the genomic study of reproductive traits of males and females due to their economic importance. In this study, genome-wide associations were assessed for scrotal circumference at 210 d of age, scrotal circumference at 420 d of age, age at first calving, and age at second calving, in Canchim beef cattle. Data quality control was conducted resulting in 672,778 SNPs and 392 animals.

Results

Associated SNPs were observed for scrotal circumference at 420 d of age (435 SNPs), followed by scrotal circumference at 210 d of age (12 SNPs), age at first calving (six SNPs), and age at second calving (four SNPs). We investigated whether significant SNPs were within genic or surrounding regions. Biological processes of genes were associated with immune system, multicellular organismal process, response to stimulus, apoptotic process, cellular component organization or biogenesis, biological adhesion, and reproduction.

Conclusions

Few associations were observed for scrotal circumference at 210 d of age, age at first calving, and age at second calving, reinforcing their polygenic inheritance and the complexity of understanding the genetic architecture of reproductive traits. Finding many associations for scrotal circumference at 420 d of age in various regions of the Canchim genome also reveals the difficulty of targeting specific candidate genes that could act on fertility; nonetheless, the high linkage disequilibrium between loci herein estimated could aid to overcome this issue. Therefore, all relevant information about genomic regions influencing reproductive traits may contribute to target candidate genes for further investigation of causal mutations and aid in future genomic studies in Canchim cattle to improve the breeding program.

Electronic supplementary material

The online version of this article (doi:10.1186/s40104-017-0199-8) contains supplementary material, which is available to authorized users.

Justification for setting the individual animal genotype call rate threshold at eighty-five percent

Data quality of SNP arrays impacts the accuracy and precision of downstream data analyses. One such quality control measure often imposed is a threshold on individual animal call rate. Different call rate thresholds have been applied across studies; little is known, however, about the impact of these thresholds on the quality of the genotype data. The objective of the present study was to investigate the effect of different call rate thresholds on the integrity of the genotypes but also to quantify the contribution of different factors to the variability in animal call rate. Data included 142,342 samples genotyped on a custom Illumina genotype panel from 141,591 dairy and beef cattle; the number of Illumina SNP on the panel was 14,371. The mean animal call rate across all samples was 99.09%; 487 animals had both a low call rate (<99%) and a subsequent high call rate (≥99%) after resampling and regenotyping. Several factors were associated ( < 0.001) with individual call rate including animal sex, the sampling herd, the date of genotyping, the genotyping plate, and the plate well. The genotype and allele concordance between the genotypes of the 487 low- and high-call rate individuals improved at a diminishing rate as mean animal call rate increased. Mean genotype and allele concordance rates of 0.987 and 0.997, respectively, existed when animal call rate was between 85 and 90%, increasing to 0.998 and 0.999, respectively, when animal call rate was between 95 and <99%. The mean within-animal allele concordance rate of rare variants (i.e., minor allele frequency < 0.05) between low and high genotype call rate animals increased when animal call rate improved; an allele concordance rate of 1.00 was achieved when animal call rate was between 85 and <99%. The accuracy of imputation of the nonobserved genotypes in the low-call rate animals improved as animal call rate increased; the mean genotype concordance rate of the imputed nonobserved SNP was 0.41 when animal call rate was <40% but increased to 0.95 when animal call rate was between 95 and <99%. Parentage validation, determined by the count of opposing homozygotes in a parent-progeny pair, was unreliable when animal call rate was <85%. Therefore, to ensure the provision of high-quality genotypes while also considering the cost and inconvenience of resampling and regenotyping, we suggest a minimum animal call rate threshold of 85%.

Heritabilities and genetic correlations of pulmonary arterial pressure and performance traits in Angus cattle at high altitude

Pulmonary arterial pressure (PAP) is an indicator trait for pulmonary hypertension and for the risk of developing high-altitude disease (HAD) in cattle. Pulmonary arterial pressures provide a tool for selection of breeding cattle for tolerance to high altitude in mountainous regions of the United States. The objective of this study was to evaluate relationships between growth performance traits and yearling PAP (42.4 ± 9.9 mmHg; = 5,776; elevation 2,150 m) using data from 1993 to 2014 in the John E. Rouse Colorado State University Beef Improvement Center (CSU-BIC) Angus herd. The breeding program used sires ( = 299) from both low- and high-elevation environments. We hypothesized that little to no genetic relationship exists between PAP and birth weight (BWT; direct and maternal), weaning weight (WW; direct and maternal), yearling weight (YW; direct and maternal), and postweaning gain (PWG). Historic selection of natural service sires from within the herd required a PAP of ≤ 42 mmHg. Outside AI sires ( = 156) used in this breeding program were not PAP tested and therefore were used with little knowledge of these sires' high-altitude adaptability. Performance traits (± SD) routinely recorded included BWT (36.2 ± 5.1 kg; = 8,695), WW (213.5 ± 31.8 kg; = 8,010), YW (345.6 ± 83.8 kg; = 5,580), and PWG (122.0 ± 63.7 kg; = 5,449), where PWG represented the total weight gained from weaning to yearling age. Four-trait analyses using REML were conducted with an animal model. The heritability estimates (± SE) for PAP (0.26 ± 0.03), BWT direct (0.42 ± 0.04) and maternal (0.14 ± 0.02), WW direct (0.29 ± 0.04) and maternal (0.19 ± 0.03), YW direct (0.45 ± 0.04) and maternal (0.23 ± 0.03), and PWG (0.14 ± 0.02) were in the range of those reported in previous literature. Estimates of genetic correlations (± SE) revealed weak relationships between PAP and direct and maternal BWT, direct and maternal WW, direct and maternal YW, and PWG of 0.15 ± 0.09, 0.14 ± 0.10, 0.23 ± 0.09, -0.01 ± 0.10, 0.12 ± 0.08, 0.00 ± 0.09, and -0.10 ± 0.10, respectively. The results of this study suggest that selection for lower PAP measures should have minimal influence on the growth performance of yearling Angus bulls and heifers at the CSU-BIC, supporting our hypothesis.

Genomic prediction for beef fatty acid profile in Nellore cattle

The objective of this study was to compare SNP-BLUP, BayesCπ, BayesC and Bayesian Lasso methodologies to predict the direct genomic value for saturated, monounsaturated, and polyunsaturated fatty acid profile, omega 3 and 6 in the Longissimus thoracis muscle of Nellore cattle finished in feedlot. A total of 963 Nellore bulls with phenotype for fatty acid profiles, were genotyped using the Illumina BovineHD BeadChip (Illumina, San Diego, CA) with 777,962 SNP. The predictive ability was evaluated using cross validation. To compare the methodologies, the correlation between DGV and pseudo-phenotypes was calculated. The accuracy varied from -0.40 to 0.62. Our results indicate that none of the methods excelled in terms of accuracy, however, the SNP-BLUP method allows obtaining less biased genomic evaluations, thereby; this method is more feasible when taking into account the analyses' operating cost. Despite the lowest bias observed for EBV, the adjusted phenotype is the preferred pseudophenotype considering the genomic prediction accuracies regarding the context of the present study.

Prediction of genomic breeding values for growth, carcass and meat quality traits in a multi-breed sheep population using a HD SNP chip

Background

New Zealand has some unique Terminal Sire composite sheep breeds, which were developed in the last three decades to meet commercial needs. These composite breeds were developed based on crossing various Terminal Sire and Maternal breeds and, therefore, present high genetic diversity compared to other sheep breeds. Their breeding programs are focused on improving carcass and meat quality traits. There is an interest from the industry to implement genomic selection in this population to increase the rates of genetic gain. Therefore, the main objectives of this study were to determine the accuracy of predicted genomic breeding values for various growth, carcass and meat quality traits using a HD SNP chip and to evaluate alternative genomic relationship matrices, validation designs and genomic prediction scenarios. A large multi-breed population (n = 14,845) was genotyped with the HD SNP chip (600 K) and phenotypes were collected for a variety of traits.

Results

The average observed accuracies (± SD) for traits measured in the live animal, carcass, and, meat quality traits ranged from 0.18 ± 0.07 to 0.33 ± 0.10, 0.28 ± 0.09 to 0.55 ± 0.05 and 0.21 ± 0.07 to 0.36 ± 0.08, respectively, depending on the scenario/method used in the genomic predictions. When accounting for population stratification by adjusting for 2, 4 or 6 principal components (PCs) the observed accuracies of molecular breeding values (mBVs) decreased or kept constant for all traits. The mBVs observed accuracies when fitting both G and A matrices were similar to fitting only G matrix. The lowest accuracies were observed for k-means cross-validation and forward validation performed within each k-means cluster.

Conclusions

The accuracies observed in this study support the feasibility of genomic selection for growth, carcass and meat quality traits in New Zealand Terminal Sire breeds using the Ovine HD SNP chip. There was a clear advantage on using a mixed training population instead of performing analyzes per genomic clusters. In order to perform genomic predictions per breed group, genotyping more animals is recommended to increase the size of the training population within each group and the genetic relationship between training and validation populations. The different scenarios evaluated in this study will help geneticists and breeders to make wiser decisions in their breeding programs.

Electronic supplementary material

The online version of this article (doi:10.1186/s12863-017-0476-8) contains supplementary material, which is available to authorized users.

Genomic predictions for economically important traits in Brazilian Braford and Hereford beef cattle using true and imputed genotypes

Background

Genomic selection (GS) has played an important role in cattle breeding programs. However, genotyping prices are still a challenge for implementation of GS in beef cattle and there is still a lack of information about the use of low-density Single Nucleotide Polymorphisms (SNP) chip panels for genomic predictions in breeds such as Brazilian Braford and Hereford. Therefore, this study investigated the effect of using imputed genotypes in the accuracy of genomic predictions for twenty economically important traits in Brazilian Braford and Hereford beef cattle. Various scenarios composed by different percentages of animals with imputed genotypes and different sizes of the training population were compared. De-regressed EBVs (estimated breeding values) were used as pseudo-phenotypes in a Genomic Best Linear Unbiased Prediction (GBLUP) model using two different mimicked panels derived from the 50 K (8 K and 15 K SNP panels), which were subsequently imputed to the 50 K panel. In addition, genomic prediction accuracies generated from a 777 K SNP (imputed from the 50 K SNP) were presented as another alternate scenario.

Results

The accuracy of genomic breeding values averaged over the twenty traits ranged from 0.38 to 0.40 across the different scenarios. The average losses in expected genomic estimated breeding values (GEBV) accuracy (accuracy obtained from the inverse of the mixed model equations) relative to the true 50 K genotypes ranged from −0.0007 to −0.0012 and from −0.0002 to −0.0005 when using the 50 K imputed from the 8 K or 15 K, respectively. When using the imputed 777 K panel the average losses in expected GEBV accuracy was −0.0021. The average gain in expected EBVs accuracy by including genomic information when compared to simple BLUP was between 0.02 and 0.03 across scenarios and traits.

Conclusions

The percentage of animals with imputed genotypes in the training population did not significantly influence the validation accuracy. However, the size of the training population played a major role in the accuracies of genomic predictions in this population. The losses in the expected accuracies of GEBV due to imputation of genotypes were lower when using the 50 K SNP chip panel imputed from the 15 K compared to the one imputed from the 8 K SNP chip panel.

Electronic supplementary material

The online version of this article (doi:10.1186/s12863-017-0475-9) contains supplementary material, which is available to authorized users.

Genomic prediction for carcass traits in Japanese Black cattle using single nucleotide polymorphism markers of different densities

Genomic prediction (GP) of breeding values using single nucleotide polymorphism (SNP) markers can be conducted even when pedigree information is unavailable, providing phenotypes are known and marker data are provided. While use of high-density SNP markers is desirable for accurate GP, lower-density SNPs can perform well in some situations. In the present study, GP was performed for carcass weight and marbling score in Japanese Black cattle using SNP markers of varying densities. The 1791 fattened steers with phenotypic data and 189 having predicted breeding values provided by the official genetic evaluation using pedigree data were treated as the training and validation populations respectively. Genotype data on 565837 autosomal SNPs were available and SNPs were selected to provide different equally spaced SNP subsets of lower densities. Genomic estimated breeding values (GEBVs) were obtained using genomic best linear unbiased prediction incorporating one of two types of genomic relationship matrices (G matrices). The GP accuracy assessed as the correlation between the GEBVs and the corrected records divided by the square root of estimated heritability was around 0.85 for carcass weight and 0.60 for marbling score when using 565837 SNPs. The type of G matrix used gave no substantial difference in the results at a given SNP density for traits examined. Around 80% of the GP accuracy was retained when the SNP density was decreased to 1/1000 of that of all available SNPs. These results indicate that even when a SNP panel of a lower density is used, GP may be beneficial to the pre-selection for the carcass traits in Japanese Black young breeding animals.

Identification of Gene Networks for Residual Feed Intake in Angus Cattle Using Genomic Prediction and RNA-seq

Improvement in feed conversion efficiency can improve the sustainability of beef cattle production, but genomic selection for feed efficiency affects many underlying molecular networks and physiological traits. This study describes the differences between steer progeny of two influential Angus bulls with divergent genomic predictions for residual feed intake (RFI). Eight steer progeny of each sire were phenotyped for growth and feed intake from 8 mo. of age (average BW 254 kg, with a mean difference between sire groups of 4.8 kg) until slaughter at 14-16 mo. of age (average BW 534 kg, sire group difference of 28.8 kg). Terminal samples from pituitary gland, skeletal muscle, liver, adipose, and duodenum were collected from each steer for transcriptome sequencing. Gene expression networks were derived using partial correlation and information theory (PCIT), including differentially expressed (DE) genes, tissue specific (TS) genes, transcription factors (TF), and genes associated with RFI from a genome-wide association study (GWAS). Relative to progeny of the high RFI sire, progeny of the low RFI sire had -0.56 kg/d finishing period RFI (P = 0.05), -1.08 finishing period feed conversion ratio (P = 0.01), +3.3 kg^0.75 finishing period metabolic mid-weight (MMW; P = 0.04), +28.8 kg final body weight (P = 0.01), -12.9 feed bunk visits per day (P = 0.02) with +0.60 min/visit duration (P = 0.01), and +0.0045 carcass specific gravity (weight in air/weight in air-weight in water, a predictor of carcass fat content; P = 0.03). RNA-seq identified 633 DE genes between sire groups among 17,016 expressed genes. PCIT analysis identified >115,000 significant co-expression correlations between genes and 25 TF hubs, i.e. controllers of clusters of DE, TS, and GWAS SNP genes. Pathway analysis suggests low RFI bull progeny possess heightened gut inflammation and reduced fat deposition. This multi-omics analysis shows how differences in RFI genomic breeding values can impact other traits and gene co-expression networks.

Genomic prediction for tick resistance in Braford and Hereford cattle

One of the main animal health problems in tropical and subtropical cattle production is the bovine tick, which causes decreased performance, hide devaluation, increased production costs with acaricide treatments, and transmission of infectious diseases. This study investigated the utility of genomic prediction as a tool to select Braford (BO) and Hereford (HH) cattle resistant to ticks. The accuracy and bias of different methods for direct and blended genomic prediction was assessed using 10,673 tick counts obtained from 3,435 BO and 928 HH cattle belonging to the Delta G Connection breeding program. A subset of 2,803 BO and 652 HH samples were genotyped and 41,045 markers remained after quality control. Log transformed records were adjusted by a pedigree repeatability model to estimate variance components, genetic parameters, and breeding values (EBV) and subsequently used to obtain deregressed EBV. Estimated heritability and repeatability for tick counts were 0.19 ± 0.03 and 0.29 ± 0.01, respectively. Data were split into 5 subsets using k-means and random clustering for cross-validation of genomic predictions. Depending on the method, direct genomic value (DGV) prediction accuracies ranged from 0.35 with Bayes least absolute shrinkage and selection operator (LASSO) to 0.39 with BayesB for k-means clustering and between 0.42 with BayesLASSO and 0.45 with BayesC for random clustering. All genomic methods were superior to pedigree BLUP (PBLUP) accuracies of 0.26 for k-means and 0.29 for random groups, with highest accuracy gains obtained with BayesB (39%) for k-means and BayesC (55%) for random groups. Blending of historical phenotypic and pedigree information by different methods further increased DGV accuracies by values between 0.03 and 0.05 for direct prediction methods. However, highest accuracy was observed with single-step genomic BLUP with values of 0.48 for -means and 0.56, which represent, respectively, 84 and 93% improvement over PBLUP. Observed random clustering cross-validation breed-specific accuracies ranged between 0.29 and 0.36 for HH and between 0.55 and 0.61 for BO, depending on the blending method. These moderately high values for BO demonstrate that genomic predictions could be used as a practical tool to improve genetic resistance to ticks and in the development of resistant lines of this breed. For HH, accuracies are still in the low to moderate side and this breed training population needs to be increased before genomic selection could be reliably applied to improve tick resistance.

Use of Genomic Tools to Improve Cattle Health in the Context of Infectious Diseases

Although infectious diseases impose a heavy economic burden on the cattle industry, the etiology of many disorders that affect livestock is not fully elucidated, and effective countermeasures are often lacking. The main tools available until now have been vaccines, antibiotics and antiparasitic drugs. Although these have been very successful in some cases, the appearance of parasite and microbial resistance to these treatments is a cause of concern. Next-generation sequencing provides important opportunities to tackle problems associated with pathogenic illnesses. This review describes the rapid gains achieved to track disease progression, identify the pathogens involved, and map pathogen interactions with the host. Use of novel genomic tools subsequently aids in treatment development, as well as successful creation of breeding programs aimed toward less susceptible livestock. These may be important tools for mitigating the long term effects of combating infection and helping reduce the reliance on antibiotic treatment.

Genomic prediction of breeding values for carcass traits in Nellore cattle

Background

The objective of this study was to evaluate the accuracy of genomic predictions for rib eye area (REA), backfat thickness (BFT), and hot carcass weight (HCW) in Nellore beef cattle from Brazilian commercial herds using different prediction models.

Methods

Phenotypic data from 1756 Nellore steers from ten commercial herds in Brazil were used. Animals were offspring of 294 sires and 1546 dams, reared on pasture, feedlot finished, and slaughtered at approximately 2 years of age. All animals were genotyped using a 777k Illumina Bovine HD SNP chip. Accuracy of genomic predictions of breeding values was evaluated by using a 5-fold cross-validation scheme and considering three models: Bayesian ridge regression (BRR), Bayes C (BC) and Bayesian Lasso (BL), and two types of response variables: traditional estimated breeding value (EBV), and phenotype adjusted for fixed effects (Y*).

Results

The prediction accuracies achieved with the BRR model were equal to 0.25 (BFT), 0.33 (HCW) and 0.36 (REA) when EBV was used as response variable, and 0.21 (BFT), 0.37 (HCW) and 0.46 (REA) when using Y*. Results obtained with the BC and BL models were similar. Accuracies increased for traits with a higher heritability, and using Y* instead of EBV as response variable resulted in higher accuracy when heritability was higher.

Conclusions

Our results indicate that the accuracy of genomic prediction of carcass traits in Nellore cattle is moderate to high. Prediction of genomic breeding values from adjusted phenotypes Y* was more accurate than from EBV, especially for highly heritable traits. The three models considered (BRR, BC and BL) led to similar predictive abilities and, thus, either one could be used to implement genomic prediction for carcass traits in Nellore cattle.

Genomic Prediction Accounting for Residual Heteroskedasticity

Whole-genome prediction (WGP) models that use single-nucleotide polymorphism marker information to predict genetic merit of animals and plants typically assume homogeneous residual variance. However, variability is often heterogeneous across agricultural production systems and may subsequently bias WGP-based inferences. This study extends classical WGP models based on normality, heavy-tailed specifications and variable selection to explicitly account for environmentally-driven residual heteroskedasticity under a hierarchical Bayesian mixed-models framework. WGP models assuming homogeneous or heterogeneous residual variances were fitted to training data generated under simulation scenarios reflecting a gradient of increasing heteroskedasticity. Model fit was based on pseudo-Bayes factors and also on prediction accuracy of genomic breeding values computed on a validation data subset one generation removed from the simulated training dataset. Homogeneous vs. heterogeneous residual variance WGP models were also fitted to two quantitative traits, namely 45-min postmortem carcass temperature and loin muscle pH, recorded in a swine resource population dataset prescreened for high and mild residual heteroskedasticity, respectively. Fit of competing WGP models was compared using pseudo-Bayes factors. Predictive ability, defined as the correlation between predicted and observed phenotypes in validation sets of a five-fold cross-validation was also computed. Heteroskedastic error WGP models showed improved model fit and enhanced prediction accuracy compared to homoskedastic error WGP models although the magnitude of the improvement was small (less than two percentage points net gain in prediction accuracy). Nevertheless, accounting for residual heteroskedasticity did improve accuracy of selection, especially on individuals of extreme genetic merit.

Genome-wide association study for calving performance using high-density genotypes in dairy and beef cattle

Background

Calving difficulty and perinatal mortality are prevalent in modern-day cattle production systems. It is well-established that there is a genetic component to both traits, yet little is known about their underlying genomic architecture, particularly in beef breeds. Therefore, we performed a genome-wide association study using high-density genotypes to elucidate the genomic architecture of these traits and to identify regions of the bovine genome associated with them.

Results

Genomic regions associated with calving difficulty (direct and maternal) and perinatal mortality were detected using two statistical approaches: (1) single-SNP (single nucleotide polymorphism) regression and (2) a Bayesian approach. Data included high-density genotypes on 770 Holstein-Friesian, 927 Charolais and 963 Limousin bulls. Several novel or previously identified genomic regions were detected but associations differed by breed. For example, two genomic associations, one each on chromosomes 18 and 2 explained 2.49 % and 3.13 % of the genetic variance in direct calving difficulty in the Holstein-Friesian and Charolais populations, respectively. Imputed Holstein-Friesian sequence data was used to refine the genomic regions responsible for significant associations. Several candidate genes on chromosome 18 were identified and four highly significant missense variants were detected within three of these genes (SIGLEC12, CTU1, and ZNF615). Nevertheless, only CTU1 contained a missense variant with a putative impact on direct calving difficulty based on SIFT (0.06) and Polyphen (0.95) scores. Using imputed sequence data, we refined a genomic region on chromosome 4 associated with maternal calving difficulty in the Holstein-Friesian population and found the strongest association with an intronic variant in the PCLO gene. A meta-analysis was performed across the three breeds for each calving performance trait to identify common variants associated with these traits in the three breeds. Our results suggest that a portion of the genetic variation in calving performance is common to all three breeds.

Conclusion

The genomic architecture of calving performance is complex and mainly influenced by many polymorphisms of small effect. We identified several associations of moderate effect size but the majority were breed-specific, indicating that breed-specific alleles exist for calving performance or that the linkage phase between genotyped allele and causal mutation varies between breeds.

Electronic supplementary material

The online version of this article (doi:10.1186/s12711-015-0126-4) contains supplementary material, which is available to authorized users.

Comparison of Bayesian models to estimate direct genomic values in multi-breed commercial beef cattle

Background

While several studies have examined the accuracy of direct genomic breeding values (DGV) within and across purebred cattle populations, the accuracy of DGV in crossbred or multi-breed cattle populations has been less well examined. Interest in the use of genomic tools for both selection and management has increased within the hybrid seedstock and commercial cattle sectors and research is needed to determine their efficacy. We predicted DGV for six traits using training populations of various sizes and alternative Bayesian models for a population of 3240 crossbred animals. Our objective was to compare alternate models with different assumptions regarding the distributions of single nucleotide polymorphism (SNP) effects to determine the optimal model for enhancing feasibility of multi-breed DGV prediction for the commercial beef industry.

Results

Realized accuracies ranged from 0.40 to 0.78. Randomly assigning 60 to 70% of animals to training (n ≈ 2000 records) yielded DGV accuracies with the smallest coefficients of variation. Mixture models (BayesB95, BayesCπ) and models that allow SNP effects to be sampled from distributions with unequal variances (BayesA, BayesB95) were advantageous for traits that appear or are known to be influenced by large-effect genes. For other traits, models differed little in prediction accuracy (~0.3 to 0.6%), suggesting that they are mainly controlled by small-effect loci.

Conclusions

The proportion (60 to 70%) of data allocated to training that optimized DGV accuracy and minimized the coefficient of variation of accuracy was similar to large dairy populations. Larger effects were estimated for some SNPs using BayesA and BayesB95 models because they allow unequal SNP variances. This substantially increased DGV accuracy for Warner-Bratzler Shear Force, for which large-effect quantitative trait loci (QTL) are known, while no loss in accuracy was observed for traits that appear to follow the infinitesimal model. Large decreases in accuracy (up to 0.07) occurred when SNPs that presumably tag large-effect QTL were over-regressed towards the mean in BayesC0 analyses. The DGV accuracies achieved here indicate that genomic selection has predictive utility in the commercial beef industry and that using models that reflect the genomic architecture of the trait can have predictive advantages in multi-breed populations.

Electronic supplementary material

The online version of this article (doi:10.1186/s12711-015-0106-8) contains supplementary material, which is available to authorized users.

Methods to address poultry robustness and welfare issues through breeding and associated ethical considerations

As consumers and society in general become more aware of ethical and moral dilemmas associated with intensive rearing systems, pressure is put on the animal and poultry industries to adopt alternative forms of housing. This presents challenges especially regarding managing competitive social interactions between animals. However, selective breeding programs are rapidly advancing, enhanced by both genomics and new quantitative genetic theory that offer potential solutions by improving adaptation of the bird to existing and proposed production environments. The outcomes of adaptation could lead to improvement of animal welfare by increasing fitness of the animal for the given environments, which might lead to increased contentment and decreased distress of birds in those systems. Genomic selection, based on dense genetic markers, will allow for more rapid improvement of traits that are expensive or difficult to measure, or have a low heritability, such as pecking, cannibalism, robustness, mortality, leg score, bone strength, disease resistance, and thus has the potential to address many poultry welfare concerns. Recently selection programs to include social effects, known as associative or indirect genetic effects (IGEs), have received much attention. Group, kin, multi-level, and multi-trait selection including IGEs have all been shown to be highly effective in reducing mortality while increasing productivity of poultry layers and reduce or eliminate the need for beak trimming. Multi-level selection was shown to increases robustness as indicated by the greater ability of birds to cope with stressors. Kin selection has been shown to be easy to implement and improve both productivity and animal well-being. Management practices and rearing conditions employed for domestic animal production will continue to change based on ethical and scientific results. However, the animal breeding tools necessary to provide an animal that is best adapted to these changing conditions are readily available and should be used, which will ultimately lead to the best possible outcomes for all impacted.

Evaluation of genome based estimated breeding values for meat quality in a berkshire population using high density single nucleotide polymorphism chips

The accuracy of genomic estimated breeding values (GEBV) was evaluated for sixteen meat quality traits in a Berkshire population (n = 1,191) that was collected from Dasan breeding farm, Namwon, Korea. The animals were genotyped with the Illumina porcine 62 K single nucleotide polymorphism (SNP) bead chips, in which a set of 36,605 SNPs were available after quality control tests. Two methods were applied to evaluate GEBV accuracies, i.e. genome based linear unbiased prediction method (GBLUP) and Bayes B, using ASREML 3.0 and Gensel 4.0 software, respectively. The traits composed different sets of training (both genotypes and phenotypes) and testing (genotypes only) data. Under the GBLUP model, the GEBV accuracies for the training data ranged from 0.42±0.08 for collagen to 0.75±0.02 for water holding capacity with an average of 0.65±0.04 across all the traits. Under the Bayes B model, the GEBV accuracy ranged from 0.10±0.14 for National Pork Producers Council (NPCC) marbling score to 0.76±0.04 for drip loss, with an average of 0.49±0.10. For the testing samples, the GEBV accuracy had an average of 0.46±0.10 under the GBLUP model, ranging from 0.20±0.18 for protein to 0.65±0.06 for drip loss. Under the Bayes B model, the GEBV accuracy ranged from 0.04±0.09 for NPCC marbling score to 0.72±0.05 for drip loss with an average of 0.38±0.13. The GEBV accuracy increased with the size of the training data and heritability. In general, the GEBV accuracies under the Bayes B model were lower than under the GBLUP model, especially when the training sample size was small. Our results suggest that a much greater training sample size is needed to get better GEBV accuracies for the testing samples.

Kernel-based variance component estimation and whole-genome prediction of pre-corrected phenotypes and progeny tests for dairy cow health traits

Prediction of complex trait phenotypes in the presence of unknown gene action is an ongoing challenge in animals, plants, and humans. Development of flexible predictive models that perform well irrespective of genetic and environmental architectures is desirable. Methods that can address non-additive variation in a non-explicit manner are gaining attention for this purpose and, in particular, semi-parametric kernel-based methods have been applied to diverse datasets, mostly providing encouraging results. On the other hand, the gains obtained from these methods have been smaller when smoothed values such as estimated breeding value (EBV) have been used as response variables. However, less emphasis has been placed on the choice of phenotypes to be used in kernel-based whole-genome prediction. This study aimed to evaluate differences between semi-parametric and parametric approaches using two types of response variables and molecular markers as inputs. Pre-corrected phenotypes (PCP) and EBV obtained for dairy cow health traits were used for this comparison. We observed that non-additive genetic variances were major contributors to total genetic variances in PCP, whereas additivity was the largest contributor to variability of EBV, as expected. Within the kernels evaluated, non-parametric methods yielded slightly better predictive performance across traits relative to their additive counterparts regardless of the type of response variable used. This reinforces the view that non-parametric kernels aiming to capture non-linear relationships between a panel of SNPs and phenotypes are appealing for complex trait prediction. However, like past studies, the gain in predictive correlation was not large for either PCP or EBV. We conclude that capturing non-additive genetic variation, especially epistatic variation, in a cross-validation framework remains a significant challenge even when it is important, as seems to be the case for health traits in dairy cows.