IPS-Empress II inlay-retained fixed partial denture reinforced with zirconia bar: three-dimensional finite element and in-vitro studies

Biomechanical reinforcement by CAD-CAM materials affects stress distributions of posterior composite bridges: 3D finite element analysis

OBJECTIVES

This 3D finite element analysis study aimed to investigate the effect of reinforcing CAD-CAM bars on stress distribution in various components of a posterior composite bridge.

METHODS

A virtual model mimicking the absence of an upper second premolar was created, featuring class II cavity preparations on the proximal surfaces of the adjacent abutment teeth surrounding the edentulous space. Five distinct finite element analysis (FEA) models were generated, each representing a CAD-CAM reinforcing bar material: 3-YTZP (IPS. emax ZirCAD MO; Zr), lithium disilicate (IPS e.max CAD; EX), nano-hybrid resin composite (Grandio Blocs; GB), Fibre-reinforced composite (Trilor; Tri), and polyetheretherketone (PEEK). A veneering resin composite was employed to simulate the replacement of the missing premolar (pontic). In the FEA, an axial force of 600 N and a transverse load of 20 N were applied at the center of the pontic. Subsequently, maximum von Mises (mvM) and maximum principal stresses (σmax) were computed across various components of the generated models. Additionally, shear stresses at the interface between the CAD-CAM bars and the veneering resin composite were determined.

RESULTS

CAD-CAM materials with high modulus of elasticity, such as Zr and EX, exhibited the highest mvM stresses and shear stresses while transferring the lowest stress to the veneering resin composite in comparison to other materials. Conversely, PEEK demonstrated the lowest mvM stresses but produced the highest stresses within the veneering resin composite. There was a uniform distribution of mvM stresses in the remaining tooth structure among all groups, except for a noticeable elevation in the molar region of Zr and EX groups.

SIGNIFICANCE

Reinforcing CAD-CAM bar materials with a high modulus of elasticity, such as Zr and EX, may result in debonding failures at the connector sites of posterior composite bridges. Conversely, GB, PEEK, and Tri have the potential to cause fracture failures at the connectors rather than debonding.

Comparing short implants to standard dental implants: a systematic review and meta-analysis of randomized controlled trials with extended follow-up

PURPOSE

To compare the difference of marginal level changes (MBL), implant failure (IF), biological and prosthetic complications (BC and PC), and prosthetic failure (PF) of short implants (SH) and standard implants (ST).

MATERIALS AND METHODS

Electronic searches (PubMed, Web of Science, EMBASE, Scopus, Cochrane Central Register of Controlled Trials, and ClinicalTrials.gov) and manual searches were performed to identify all randomized controlled trials (RCTs) evaluating SH to ST. Applying Stata, a meta-analysis was conducted on the weighted mean difference (WMD) and standardized mean difference (SMD) of MBL and the risk difference (RD) of the secondary outcome.

RESULTS

Twenty-four articles were involved in the present study. There were statistically significant differences in MBLs, preferring short implants in the maxilla (WMD: -0.147 (CI: -0.224, -0.070), I2: 76.6%; SMD: -0.757 (CI: -1.226, -0.289), I2: 89.2%) and in the mandible (WMD: -0.377 (CI: -0.656, -0.098), I2: 85.8%; SMD: -0.811 (CI: -1.418, -0.204), I2: 78.8%). There were no significant differences in IF (RD: 0.011 (-0.002, 0.023), I2: 0.0%), PF (RD:0.003 (-0.007, 0.014), I2: 0.0%), and PC (RD:0.001 (-0.008, 0.010), I2: 0.0%). There were significantly higher biological complications (RD: -0.071 (-0.106, -0.036), I2: 0.82.9%) for ST compared to SH in both jaws up to a 10-year follow-up.

CONCLUSION

SH and ST had comparable overall outcomes, but short implants had less marginal bone loss and lower biological complications. However, more research is needed to confirm these findings.

Scientific Trends in Clinical Research on Zirconia Dental Implants: A Bibliometric Review

Background: The clinical use of zirconia implants has been shown to increase steadily due to their biological, aesthetic, and physical properties; therefore, this bibliometric study aimed to review the clinical research and co-authors in the field of zirconia dental implant rehabilitation. Methods: We searched Scopus and Web of Science databases using a comprehensive search strategy to 5 October 2020, and independently paired reviewers who screened studies, and collected data with inclusion criteria restricted to clinical research only (either prospective or retrospective). Data on article title, co-authors, number of citations received, journal details, publication year, country and institution involved, funding, study design, marginal bone loss, survival rate, failure, follow-up, and the author’s bibliometric data were collected and evaluated. Results: A total of 29 clinical studies were published between 2008 and 2020 as 41.4% were prospective cohort studies and 48.3% originated from Germany. Most of the included studies had been published in Clinical Oral Implant Research (n = 12), and the most productive institution was the Medical Center of University of Freiburg. The author with the largest number of clinical studies on zirconia implants was Kohal R.J. (n = 10), followed by Spies B.C. (n = 8). Conclusions: This study revealed that zirconia implants have been more prominent in the last ten years, which is a valuable option for oral rehabilitation with marginal bone loss and survival rate comparable to titanium dental implants.

Evaluation of Different Restoration Combinations Used in the Reattachment of Fractured Teeth: A Finite Element Analysis

Objective. The purpose of this study was to test different restoration combinations used for constructing fractured endodontically treated incisors by reattaching their fractured fragments. Methods. Seven types of 3-D FEM mathematical root canal-filled models were generated, simulating cases of (OB) reattaching fractured fragments; (CrPL) reattaching fractured fragments + ceramic palatinal laminate; (CmPL) reattaching fractured fragments + composite palatinal laminate; (CM) reattaching fractured fragments + coronal 1/3 of the root was filled using core material; (BP) reattaching fractured fragments + glass fiber post; (CP) composite resin restoration + glass fiber post; and (OC) composite resin restoration. A 100-N static oblique force was applied to the simulated teeth with 135° on the node at 2 mm above the cingulum to analyze the stress distribution at the tooth. Results. For enamel tissue, the highest stress values were observed in model BP, and the lowest stress values were observed in model CmPL. For dentine tissue, the highest stress concentrations were observed around the fracture line for all models. Conclusions. Reattachment of fractured fragments by bonding may be preferred as a restoration option for endodontically treated incisors; also, palatinal laminate decreases the stress values at tooth tissues, especially at the enamel and the fracture line.