Enamel erosion depths measured on impressions by a white light interferometer

Use of polyvinyl siloxane impressions to monitor sub-5-μm erosive tooth wear on unpolished enamel

STATEMENT OF PROBLEM

Whether polyvinyl siloxane impressions are capable of reproducing 5-μm changes on natural freeform enamel and potentially enabling clinical measurements of early surface changes consistent with wear of teeth or materials is unclear.

PURPOSE

The purpose of this in vitro study was to investigate and compare polyvinyl siloxane replicas with direct measurements of sub-5-μm lesions on unpolished human enamel lesions by using profilometry, superimposition, and a surface subtraction software program.

MATERIAL AND METHODS

Twenty ethically approved unpolished human enamel specimens were randomized to a previously reported cyclic erosion (n=10) and erosion and abrasion (n=10) model to create discrete sub-5-μm lesions on the surface. Low viscosity polyvinyl siloxane impressions were made of each specimen before and after each cycle and scanned by using noncontacting laser profilometry and viewed with a digital microscopy and compared with direct scanning of the enamel surface. The digital maps were then interrogated with surface- registration and subtraction workflows to extrapolate enamel loss from the unpolished surfaces by using step-height and digital surface microscopy to measure roughness.

RESULTS

Direct measurement revealed chemical loss of enamel at 3.4 ±0.43 μm, and the polyvinyl siloxane replicas were 3.20 ±0.42 μm, respectively. For chemical and mechanical loss direct measurement was 6.12 ±1.05 μm and 5.79 ±1.06 μm for the polyvinyl siloxane replica (P=.211). The overall accuracy between direct and polyvinyl siloxane replica measurements was 0.13 +0.57 and -0.31 μm for erosion and 0.12 +0.99 and -0.75 μm for erosion and abrasion. Surface roughness and visualization with digital microscopy provided confirmatory data.

CONCLUSIONS

Polyvinyl siloxane replica impressions from unpolished human enamel were accurate and precise at the sub-5-μm level.

Measurement of erosion depth using microcomputed tomography and light microscopy

Tooth-erosion is the surface loss of dental hard tissue mostly associated with an acid attack. The aim was to compare dentin and enamel erosion depth measurements using micro-computed tomography (microCT) and light microscopy (LM). Enamel/dentin blocks were prepared from caries-free human molar-teeth (N = 12). Teeth were sectioned to a rectangular shape of 4 × 4 × 6 mm. Specimens were treated with water (NC) or 1.0% citric-acid solution (PC). After treatment, specimens were scanned with micro-computed tomography. On completion, specimens were sectioned and observed under a light-microscope. Lesion depth was observed with 10× magnification and images transferred to Simpleware software. Vertical distance from lesion surface to bottom was measured. Pearson correlation test was used to evaluate correlation and Wilcoxon Signed Rank test to evaluate differences in the two-analysis methods. Mean enamel erosion depth was 0.63 and 38.38 μm (microCT) and 0.54 and 39.43 μm (LM) for NC and PC, respectively. Dentin erosion depth was 0.72 and 48.05 μm (microCT) and 0.56 and 49.92 μm (LM) for NC and PC, respectively. There was a significant correlation between the two-analysis methods (r = 0.998; p < .001). No statistically significant difference in results were obtained when microCT and LM were compared (p = .584). This results obtained from the current study suggested that erosion depth measurements made using microCT and LM yielded comparable results. The microCT method is preferred if the conservation of specimens is desired.

Analytical strategies for clinical studies on dental erosive wear

BACKGROUND

There is a need for analytical techniques for measuring Erosive Tooth Wear (ETW) on natural surfaces in clinical studies. The purpose was to investigate the use of two instruments aimed to assess initial to more advanced stages of ETW.

METHODS

Human premolar enamel samples (2x3mm) (n = 24), were polished flat and mounted in resin cylinders (4 cylinders, 6 samples in each). Part 1: Baseline analyses by White Light Interferometer (WLI), Surface Reflection Intensity (SRI: TableTop and OptiPen) and Surface Hardness (SH). Erosion (1% citric acid (pH 3.6) for 1, 2, 4, 6, 8, 10 min. SRI and SH analyses after every erosion episode and by WLI after 10 min. New indentations were made and enamel loss; was measured by change in indentation depths from toothbrush abrasion (200 g, 60 strokes, 30 s). Another series of 2 × 5 min erosion (totally15 min and 20 min) was analysed with SH and SRI after each erosion, and by WLI (on samples and impressions of samples) after 20 min. Part 2 investigated WLI performance in the interface where initial erosion increases in severity and substance loss occurs. The samples were repolished. Baseline analyses by WLI, SRI (TableTop and OptiPen) and SH. Four cylinders were etched for 1, 2, 4, 8 min respectively and analysed by SRI, SH on samples, and WLI on samples and impressions).

RESULTS

Part1: SRI decreased from baseline to ~ 6 min etch and increased slightly after abrasion, the two devices correlated well (ICC 0.98 p < 0.001, Spearmans rs 0.91 p < 0.001). SH decreased nearly linearly to 10 min etch, but increased distinctly after abrasion. Mean enamel loss from abrasion alone was 0.2 μm (change in indentation depths). After 10 min etch, it was 0.27 μm (WLI) and after 20 min etch, it was 2.2 μm measured on samples vs 2.4 μm on impressions of samples (7% higher). Part 2: From baseline to 8 min etch; SRI and SH decreased whereas WLI presented increasing etch depths.

CONCLUSIONS

With some adjustments, the use of SRI and WLI in combination seems to be a promising strategy for monitoring ETW in clinical studies.

Genetic variation may explain why females are less susceptible to dental erosion

Not all individuals at risk for dental erosion (DE) display erosive lesions. The prevalence of DE is higher among male subjects. The occurrence of DE may depend on more than just acidic challenge, with genetics possibly playing a role. The aim of this study was to investigate the association of enamel-formation genes with DE. One premolar and a saliva sample were collected from 90 individuals. Prepared teeth were immersed in 0.01 M HCl (pH 2.2), and enamel loss (μm) was measured using white light interferometry. DNA was extracted from saliva, and 15 single-nucleotide polymorphisms were analysed. Allele and genotype frequencies were related to the enamel loss of the specimens. Single-marker and haplotype analyses were performed using sex as a covariate. Mean enamel loss was higher for male donors than for female donors (P = 0.047). Significant associations were found between enamel loss and amelogenin, X-linked (AMELX), tuftelin 1 (TUFT1), and tuftelin-interacting protein 11 (TFIP11). Analyses showed significant associations between variation in enamel-formation genes and a lower susceptibility to DE in female subjects. The results indicate that susceptibility to DE is influenced by genetic variation, and may, in part, explain why some individuals are more susceptible than others to DE, including differences between female subjects and male subjects.