Chemical debridement of contaminated titanium surfaces: an in vitro study

Microbiological and Imaging-Based Evaluations of Photodynamic Therapy Combined with Er:YAG Laser Therapy in the In Vitro Decontamination of Titanium and Zirconia Surfaces

The oral cavity's soft and hard tissues create a conducive environment for microbial proliferation and biofilm development, facilitating the colonization of prosthodontic and implant materials such as titanium (Ti) and zirconia (Zr). This study aimed to compare the efficacy of conventional decontamination methodologies (i.e., chemical and mechanical, using 0.12% digluconate chlorhexidine (CHX) solution-treatment and airflow) to adjunctive laser-based interventions on Ti and Zr substrates inoculated with Staphylococcus (S.) aureus ATCC 25923. Additionally, this investigation sought to elucidate the impact of these treatments on temperature variations and surface integrity, analyzing the laser irradiation effects on these prevalent dental materials. Experimental configurations were delineated for both Ti and Zr samples across four groups: (1) a conventional treatment group (CV); (2) a photodynamic therapy group (PDT); (3) an Er:YAG laser treatment group (Er); (4) a combined PDT and Er:YAG treatment group (PDTEr). Also, a negative control group (C) that received no treatment was considered. The decontamination of the inoculated disc samples was evaluated by quantifying the microbial colonies in colony-forming units per milliliter (CFU/mL). Temperature variations on the surface of the samples were determined during laser treatments. Surface modifications were investigated using scanning electron microscopy (SEM) and optical coherence tomography (OCT). For statistical analysis, Fisher 95% confidence intervals, Hsu's MCB method, and the Kruskal-Wallis test were applied. With regard to the 105 CFU/mL of the negative control group, results indicated average values equal for each study group to (1) 2.66 CFU/mL for Ti and 2 CFU/mL for Zr for the CV group; (2) 0.33 CFU/mL for Ti and 1 CFU/mL for Zr for the PDT group; (3) 1.25 CFU/mL for Ti and 0 CFU/mL for Zr for the Er group; (4), and 0 CFU/mL for both Ti and Zr for the PDTEr group. Therefore, the combined PDT and Er:YAG treatment (PDTEr) and the singular PDT modality outperformed conventional decontamination methods in eradicating S. aureus biofilms from both Ti and Zr surfaces. Notably, the PDTEr regime achieved a comprehensive elimination of microbial colonies on treated substrates. Surface examination employing OCT demonstrated discernible alterations in the surface morphology of samples subjected to Er:YAG and combined PDT and Er:YAG treatments. Temperature checks during treatments showed no major changes, suggesting the applied laser methods are safe. In conclusion, PDTEr and PDT eliminated bacteria more effectively, but Zr surfaces were more resilient, making them better for microbe-controlling applications. Also, the study demonstrated that the (less costly but lower resolution) OCT method can replace SEM for such investigations.

Utilizing Rapid Hydrogen Peroxide Generation from 6-Hydroxycatechol to Design Moisture-Activated, Self-Disinfecting Coating

A coating that can be activated by moisture found in respiratory droplets could be a convenient and effective way to control the spread of airborne pathogens and reduce fomite transmission. Here, the ability of a novel 6-hydroxycatechol-containing polymer to function as a self-disinfecting coating on the surface of polypropylene (PP) fabric was explored. Catechol is the main adhesive molecule found in mussel adhesive proteins. Molecular oxygen found in an aqueous solution can oxidize catechol and generate a known disinfectant, hydrogen peroxide (H2O2), as a byproduct. However, given the limited amount of moisture found in respiratory droplets, there is a need to enhance the rate of catechol autoxidation to generate antipathogenic levels of H2O2. 6-Hydroxycatechol contains an electron donating hydroxyl group on the 6-position of the benzene ring, which makes catechol more susceptible to autoxidation. 6-Hydroxycatechol-coated PP generated over 3000 μM of H2O2 within 1 h when hydrated with a small amount of aqueous solution (100 μL of PBS). The generated H2O2 was three orders of magnitude higher when compared to the amount generated by unmodified catechol. 6-Hydroxycatechol-containing coating demonstrated a more effective antimicrobial effect against both Gram-positive (Staphylococcus aureus and Staphylococcus epidermidis) and Gram-negative (Pseudomonas aeruginosa and Escherichia coli) bacteria when compared to unmodified catechol. Similarly, the self-disinfecting coating reduced the infectivity of both bovine viral diarrhea virus and human coronavirus 229E by as much as a 2.5 log reduction value (a 99.7% reduction in viral load). Coatings containing unmodified catechol did not generate sufficient H2O2 to demonstrate significant virucidal effects. 6-Hydroxycatechol-containing coating can potentially function as a self-disinfecting coating that can be activated by the moisture present in respiratory droplets to generate H2O2 for disinfecting a broad range of pathogens.

Effectiveness of mechanical and chemical decontamination methods for the treatment of dental implant surfaces affected by peri-implantitis: A systematic review and meta-analysis

OBJECTIVE

To assess which decontamination method(s) used for the debridement of titanium surfaces (disks and dental implants) contaminated with bacterial, most efficiently eliminate bacterial biofilms.

MATERIAL AND METHODS

A systematic search was conducted in four electronic databases between January 1, 2010 and October 31, 2022. The search strategy followed the PICOS format and included only in vitro studies completed on either dental implant or titanium disk samples. The assessed outcome variable consisted of the most effective method(s)-chemical or mechanical- removing bacterial biofilm from titanium surfaces. A meta-analysis was conducted, and data was summarized through single- and multi-level random effects model (p < .05).

RESULTS

The initial search resulted in 5260 articles after the removal of duplicates. After assessment by title, abstract, and full-text review, a total of 13 articles met the inclusion criteria for this review. Different decontamination methods were assessed, including both mechanical and chemical, with the most common method across studies being chlorhexidine (CHX). Significant heterogeneity was noted across the included studies. The meta-analyses only identified a significant difference in biofilm reduction when CHX treatment was compared against PBS. The remaining comparisons did not identify significant differences between the various decontamination methods.

CONCLUSIONS

The present results do not demonstrate that one method of decontamination is superior in eliminating bacterial biofilm from titanium disk and implant surfaces.

Efficacy of a Solution Containing 33% Trichloroacetic Acid and Hydrogen Peroxide in Decontaminating Machined vs. Sand-Blasted Acid-Etched Titanium Surfaces

This in vitro study assessed the efficacy of a solution containing 33% trichloroacetic acid (CCl3COOH; TCA) and hydrogen peroxide (H2O2) in decontaminating machined (MAC) and sand-blasted acid-etched (SBAE) titanium surfaces. A total of 80 titanium disks were prepared (40 MAC and 40 SBAE). Streptococcus sanguinis and Enterococcus faecalis strains were incubated on 36 samples, while the remaining 44 were kept as controls. Roughness analysis and scanning electron microscopy were used to evaluate the surface features before and after TCAH2O2 treatment. The viability of human adipose-derived mesenchymal stem cells (ASCs) after TCAH2O2 decontamination was assessed with a chemiluminescent assay along with cell morphology through fluorescent staining. TCAH2O2 preserved the surface topography of MAC and SBAE specimens. It also effectively eradicated bacteria on both types of specimens without altering the surface roughness (p > 0.05). Also, no significant differences in protein adsorption between the pristine and TCAH2O2-treated surfaces were found (p = 0.71 and p = 0.94). While ASC proliferation remained unchanged on MAC surfaces, a decrease was observed on the decontaminated SBAE specimens at 24 and 48 h (p < 0.05), with no difference at 72 h (p > 0.05). Cell morphology showed no significant changes after 72 h on both surface types even after decontamination. This study suggests TCAH2O2 as a promising decontamination agent for titanium surfaces, with potential implications for peri-implant health and treatment outcomes.

The Antimicrobial Activity of Curcumin and Xanthohumol on Bacterial Biofilms Developed over Dental Implant Surfaces

In search for natural products with antimicrobial properties for use in the prevention and treatment of peri-implantitis, the purpose of this investigation was to evaluate the antimicrobial activity of curcumin and xanthohumol, using an in vitro multi-species dynamic biofilm model including Streptococcus oralis, Actinomyces naeslundii, Veillonella parvula, Fusobacterium nucleatum, Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans. The antimicrobial activities of curcumin (5 mM) and xanthohumol (100 μM) extracts, and the respective controls, were evaluated with 72-h biofilms formed over dental implants by their submersion for 60 seconds. The evaluation was assessed by quantitative polymerase chain reaction (qPCR), confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). For the data analysis, comparisons were tested applying ANOVA tests with post-hoc Bonferroni corrections to evaluate the antimicrobial activity of both extracts. With qPCR, statistically significant reductions in bacterial counts were observed for curcumin and xanthohumol, when compared to the negative control. The results with CLSM and SEM were consistent with those reported with qPCR. It was concluded that both curcumin and xanthohumol have demonstrated antimicrobial activity against the six bacterial species included in the dynamic in vitro biofilm model used.

Effectiveness and surface changes of different decontamination protocols at smooth and minimally rough titanium surfaces

BACKGROUND

The objective of this study is to evaluate titanium decontamination after different protocols while assessing changes in surface roughness, chemical composition, and wettability.

METHODS

Ninety-six smooth (S) and 96 minimally rough (R) titanium microimplants were used. Pristine microimplants were reserved for negative control (S-nC/R-nC, n = 9), while the remaining microimplants were incubated in Escherichia coli culture. Non-decontaminated microimplants were used as positive control (S-pC/R-pC, n = 3). The other microimplants were divided into seven different decontamination protocols (12 S/R per group): 24% EDTA, 2% chlorhexidine (CHL), gauze soaked in 2% chlorhexidine (GCHL), gauze soaked in ultrapure water (GMQ), scaling (SC), titanium brush (TiB), and implantoplasty (IP). Contaminated areas were assessed by scanning electron microscope images, chemical composition by energy dispersive X-ray spectroscopy, wettability by meniscus technique, and roughness by an optical profiler.

RESULTS

Higher residual bacteria were observed in R-pC compared with S-pC (P <0.0001). When comparing S and R with their respective pC groups, the best results were obtained with GCHL, SC, TiB, and IP, with no difference between these protocols (P >0.05). Changes in surface roughness were observed after all treatments, with S/R-IP presenting the smoother and a less hydrophilic surface (P <0.05). Apart from IP protocol, all the other groups presented a more hydrophilic surface in R than in S microimplants (P <0.003). All decontamination protocols resulted in a lower percentage of superficial Ti when compared with S/R-nC (P <0.002).

CONCLUSIONS

All decontamination protocols resulted in changes in roughness, wettability, and chemical composition, but GCHL, SC, TiB, an IP presented the best decontamination outcomes.

Análise físico-química da superfície de titânio após tratamento químico de descontaminação com clorexidina: estudo in vitro

Resumo Introdução Tratamentos têm sido propostos para a peri-implantite com o objetivo de descontaminar a superfície dos implantes, removendo microrganismos que podem estar associados à doença. Objetivo O objetivo deste estudo foi avaliar a ação in vitro de diferentes métodos de aplicação de digluconato de clorexidina (CLX) na descontaminação de discos de titânio (Ti) com microtopografia e seu efeito físico-químico sobre a superfície. Material e método Vinte discos de Ti foram expostos a inóculo de Escherichia coli por 24 horas. Foram distribuídos em quatro grupos de descontaminação (n=5): 1 - um minuto de exposição à solução de CLX 0,12%; 2 - dois minutos de exposição à solução de CLX 0,12%; 3 - esfregaço durante um minuto com gel de CLX 1%; 4 - esfregaço durante um minuto com gel de CLX 2%. O produto de cada disco foi diluído e plaqueado individualmente. Após 24 horas, realizou-se contagem das unidades de colônias formadas (UFC). Resultado O grupo com o menor número de crescimento de UFC foi o grupo 4 (0,20±0,37), com apenas UFC em uma das amostras. Seguido do grupo 2 (0,40±0,73), grupo 1 (18,60±33,96). O grupo 3 apresentou as maiores quantidades de UFC (36,07±41,39). Em todas as amostras, foi possível observar uma diminuição estatisticamente significante da concentração superficial de Ti, assim como um aumento de Oxigênio. Conclusão Pode-se concluir que o uso de CLX gel a 2% em superfícies de Ti com microtopografia contaminadas com E. coli propicia a eliminação das UFC e que sua aplicação resulta em diminuição do percentual de Ti e aumento do teor de O.

Antibacterial Surface Coating for Bone Scaffolds Based on the Dark Catalytic Effect of Titanium Dioxide

Biomaterials which promote tissue integration and resist microbial colonisation are required in bone tissue engineering to prevent biomaterial-associated infections. Surface modification of established materials for bone tissue engineering, such as TiO₂, have emerged as promising anti-infective strategies. Interestingly, the antibacterial activity of TiO₂ in the form of particles can be enhanced by combining it with H₂O₂, even in the absence of irradiation. However, it remains unknown whether TiO₂ surfaces elicit a similar effect. In this study, the antibacterial effect of porous TiO₂ scaffolds generated by the catalytic decomposition of H₂O₂ in the absence of light (dark catalysis) was investigated. Porous ceramic foams were fabricated and sol-gel coated for high catalytic activity. Degradation of methylene blue in the presence of 3% H₂O₂ increased by 80% for the sol-gel-coated surfaces. The degradation kinetics indicate that intermediate free radicals that form at the liquid-TiO₂ interface are responsible for the oxidative behavior of the surface. TiO₂ surfaces were further pretreated with 30% H₂O₂ for prolonged oxidative behavior. The biological response toward such surfaces was assessed in vitro. S. epidermidis biofilms formed on modified surfaces showed reduced viability compared to nonmodified surfaces. Further, the same surface modification showed no cytotoxic effects on MC3T3 preosteoblasts. However, the results from the conducted genotoxicity assay were inconclusive, and further studies are needed to exclude ROS-mediated DNA damage. To conclude, this study provides evidence that a simple surface modification based on the dark catalytic effect of TiO₂ can be used to create antibacterial surface properties for ceramic bone scaffolds.

Debridement of Bacterial Biofilms with TiO2/H2O2 Solutions and Visible Light Irradiation

Objectives

The aim of the study was to explore the debridement efficacy of different solutions of H₂O₂ and rutile particles against Staphylococcus epidermidis and Pseudomonas aeruginosa biofilms attached to titanium surfaces when exposed to visible light.

Materials and Methods

Titanium discs cultivated with biofilms of Staphylococcus epidermidis or Pseudomonas aeruginosa were subjected for 1 min to suspensions consisting of rutile particles mixed with high (950 mM) or low (2 mM) concentrations of H₂O₂ under visible light irradiation (405 nm; 2.1 mW/cm²). Discs were rinsed and the degree of debridement was determined through scanning electron microscopy and viability assessment of the remaining bacteria using luminescence measurements and/or a metabolic activity assay.

Results

Cleaning mixtures containing the higher concentration of H₂O₂ showed a significantly improved debridement compared to the negative control in all experiments. The addition of rutile particles was shown to have a statistically significant effect in one test with S. epidermidis. Limited evidence of the catalytic effect of visible light irradiation was seen, but effects were relatively small and statistically insignificant.

Conclusions

H₂O₂ at a concentration of 950 mM proved to be the strongest contribution to the debridement and bactericidal effect of the cleaning techniques tested in this study.

Antibacterial effect of hydrogen peroxide-titanium dioxide suspensions in the decontamination of rough titanium surfaces

The chemical decontamination of infected dental implants is essential for the successful treatment of peri-implantitis. The aim of this study was to assess the antibacterial effect of a hydrogen peroxide-titanium dioxide (H₂O₂-TiO₂) suspension against Staphylococcus epidermidis biofilms. Titanium (Ti) coins were inoculated with a bioluminescent S. epidermidis strain for 8 h and subsequently exposed to H₂O₂ with and without TiO₂ nanoparticles or chlorhexidine (CHX). Bacterial regrowth, bacterial load and viability after decontamination were analyzed by continuous luminescence monitoring, live/dead staining and scanning electron microscopy. Bacterial regrowth was delayed on surfaces treated with H₂O₂-TiO₂ compared to H₂O₂. H₂O₂-based treatments resulted in a lower bacterial load compared to CHX. Few viable bacteria were found on surfaces treated with H₂O₂ and H₂O₂-TiO₂, which contrasted with a uniform layer of dead bacteria for surfaces treated with CHX. H₂O₂-TiO₂ suspensions could therefore be considered an alternative approach in the decontamination of dental implants.

Effect of cleansing of biofilm formed on titanium discs

OBJECTIVES

To study the combined effect of mechanical and chemical cleansing on a 4-day biofilm grown intra-orally on titanium discs with different surface characteristics.

MATERIAL AND METHODS

Twenty subjects used a splint with two metal plates in the upper jaw. Each plate was placed in the premolar-molar region and carried four titanium discs with four different surface characteristics (OsseoSpeed(™), TiOblast(™), experimental and turned surface). After 4 days of biofilm growth, the discs were cleaned mechanically and chemically with saline or chlorhexidine. Following cleansing, microbial samples were obtained and analysed by culture. The titanium discs were processed for scanning electron microscope (SEM) analysis. The experiment was repeated 3 days later using delmopinol or a mixture of essential oils during cleansing.

RESULTS

The combination of mechanical and chemical cleansing was ineffective in complete biofilm removal from all four titanium discs. The microbiological analysis did not reveal any statistically significant differences between surface types or between cleaning agents regarding logarithmic mean counts of CFU for specific bacteria, aerobes, anaerobes or the TVC. Aerobes were more numerous than anaerobes on all surface types. The SEM analysis disclosed that the remaining biofilm on moderately rough surfaces (OsseoSpeed(™), TiOblast(™) and experimental) was complex and firmly attached, while the biofilm on turned surface had a pattern of spread bacteria forming less clusters.

CONCLUSIONS

Cleansing may call for prolonged time of chemomechanical debridement and/or more effective disinfectants to suppress biofilms on dental implant surfaces.