Serum lysozyme: evaluation of a nephelometric assay

Biocompatibility of a polymer-coated membrane possessing a hydrophilic blood-contacting layer: Adsorption-related assessment

OBJECTIVE

Currently, the foreign surfaces of extracorporeal circulation devices are coated with an acrylate-based copolymer that creates a hydrophilic blood-contacting layer to enhance biocompatibility. Several reports of acrylate-based copolymer with respect to biocompatibility have been published; however, the adsorption of peptide compounds on acrylate-based copolymer-coated membranes still requires clarity. In this study, we aimed to understand the adsorption of several peptide compounds of various molecular weights, including albumin, lysozyme, and vancomycin, on acrylate-based copolymer-coated membranes using in vitro studies.

METHODS

Six experimental circuits consisting of acrylate-based copolymer-coated tubes and membranes, and six comprising acrylate-based copolymer-coated tubes and non-coated membranes were prepared for comparison. An experimental solution, composed of albumin, lysozyme, vancomycin, and saline, was continuously stirred in a reservoir, recirculated in each experimental circuit, and then filtered. Concentrations of albumin, lysozyme, and vancomycin were measured after 0, 15, 30, 45, 60, 90, and 120 min of recirculation. Similar experiments were performed in all the prepared circuits.

RESULTS

The ratio of measured values at each time point to those at 0 min was not significantly different between acrylate-based copolymer-coated and non-coated membranes for albumin and lysozyme, but differed significantly for vancomycin; the ratios were higher in acrylate-based copolymer-coated than in non-coated membranes.

CONCLUSION

This study suggests that albumin is not adsorbed on either acrylate-based copolymer-coated or non-coated membranes, that lysozyme is not adsorbed on either membrane or is adsorbed at a similar rate on both membranes, and that vancomycin is less adsorbed on acrylate-based copolymer-coated membranes. Thus, acrylate-based copolymer coating could inhibit the adsorption of various peptide compounds.

Hemodialysis membrane coated with a polymer having a hydrophilic blood-contacting layer can enhance diffusional performance

Purpose

Currently, the foreign surfaces of various extracorporeal circulation devices are coated with a biocompatible polymer coating agent (BPA), which creates a hydrophilic blood-contacting layer to reduce thrombogenicity, while the membranes in hemodialyzers are not. We aimed to clarify other side effects of BPA-coated membranes by examining the diffusion performance in in vitro experiments.

Methods

We used a polyethersulfone membrane (sieving coefficient of albumin is ≤0.01) coated with BPA product, SEC-1™ (Toyobo), in a hemodialyzer. To estimate the diffusion rates of a wide range of molecules, 2 L of saline containing vancomycin, lysozyme, and albumin were recirculated in the circuit configured with a hemodialyzer, and dialyzed continuously using water. The concentrations of sodium, vancomycin, lysozyme, and albumin were measured every 5 minutes for 30 minutes and compared in experiments with BPA-coated (n = 4) and BPA-noncoated (n = 4) membranes.

Results

The removal rates of sodium and vancomycin after 5 minutes of dialysis (n = 24) were significantly higher in BPA-coated than noncoated membranes, while those of lysozyme and albumin were not significantly different. The removal rates of sodium and vancomycin after 30 minutes of dialysis (n = 4) were significantly higher, and those of lysozyme were significantly lower in BPA-coated than noncoated membranes, while those of albumin were not significantly different.

Conclusions

The preliminary study suggests that BPA-coated membranes enhanced the diffusion rate of molecules with low and middle molecular weight without affecting the sieving coefficient of albumin. Thus, BPA coating can enhance the dialysis performance of membranes.

Microparticle-enhanced nephelometric immunoassay of lysozyme in milk and other human body fluids

Quantitation of lysozyme in human milk was performed by a microparticle-enhanced nephelometric immunoassay based on the measurement of the light scattered during the competitive immunoagglutination of a microparticle–lysozyme conjugate with an anti-lysozyme antiserum. This immunoassay has a detection limit of 8 μg/L of reaction mixture and can be performed using diluted milk (1:6000, in reaction mixture), excluding sample pretreatment. Human milk lysozyme can be quantified over the concentration range 0.09–1.50 g/L, with within- and between-run coefficients of variation <5%. Changes in the lysozyme concentration of human milk during lactation were determined in 636 samples. Lysozyme concentrations (mean ± SE) decreased from colostrum (0.36 ± 0.02 g/L) to transitional milk (0.30 ± 0.01 g/L) and mature milk during days 15–42 (0.30 ± 0.01 g/L), then increased in the mature milk during days 43–56 (0.35 ± 0.01 g/L) and especially during days 57–84 (0.83 ± 0.05 g/L). The proportion of lysozyme contributing to total protein was found to rise during lactation and was as follows: colostrum (1.7%), transitional milk (2.3%), and mature milk from days 15–28 (2.7%), days 29–42 (3.1%), days 43–56 (3.8%), and days 57–84 (7.3%). The assay developed for milk was also suitable for the determination of lysozyme in other human body fluids.