Producing xylan/Eudragit® S100-based microparticles by chemical and physico-mechanical approaches as carriers for 5-aminosalicylic acid

Therapeutic effect of 5-ASA and hesperidin-loaded chitosan/Eudragit® S100 nanoparticles as a pH-sensitive carrier for local targeted drug delivery in a rat model of ulcerative colitis

Ulcerative colitis (UC) is an idiopathic disease characterized by colonic mucosal tissue destruction secondary to an excessive immune response. We synthesized pH-sensitive cross-linked chitosan/Eudragit® S100 nanoparticles (EU S100/CS NPs) as carriers for 5-aminosalicylic acid (5-ASA) and hesperidin (HSP), then conducted in-vitro and in-vivo studies and evaluated the therapeutic effects. In-vitro analysis revealed that the 5-ASA-loaded EU S100/CS NPs and the HSP-loaded EU S100/CS NPs had smooth and curved surfaces and ranged in size between 250 and 300 nm, with a zeta potential of 32 to 34 mV. FTIR analysis demonstrated that the drugs were loaded on the nanoparticles without significant alterations. The loading capacity and encapsulation efficiency of loading 5-ASA onto EU S100/CS NPs were 25.13 % and 60.81 %, respectively. Regarding HSP, these values were 38.34 % and 77.84 %, respectively. Drug release did not occur in simulated gastric fluid (SGF), while a slow-release pattern was recorded for both drugs in simulated intestinal fluid (SIF). In-vivo macroscopic and histopathological examinations revealed that both NPs containing drugs significantly relieved the symptoms of acetic acid (AA)-induced UC in Wistar rats. We conclude that the synthesized pH-sensitive 5-ASA/EU S100/CS NPs and HSP/EU S100/CS NPs offer promise in treating UC.

Co-emulsified Alginate-Eudragit Nanoparticles: Potential Carriers for Localized and Time-defined Release of Tenofovir in the Female Genital Tract

This research aimed to explore the possibilities of Eudragit S100 (ES100) and sodium alginate as carriers for tenofovir disoproxil fumarate (TDF) in the female genital tract. Alginate and alginate-ES100 nanoparticles were prepared using the ionic gelation and emulsion/gelation complexation method, respectively. The nanocarriers were tested using morphological, physicochemical, in vitro drug release, and cytotoxicity analyses. In SEM and TEM images, the presence of spherical and uniformly distributed nanoparticles was revealed. The FTIR spectrum showed that alginate and calcium chloride interacted due to ionic bonds linking divalent calcium ions and the -COO- of alginate groups. Alginate and ES100 interacted via the ester C=O amide stretching. The results obtained from XRD and DSC, on the other hand, revealed a favorable interaction between sodium alginate and ES100 polymers, as evidenced by the crystallization peaks observed. Under experimental design analysis and optimization, overall size distribution profiles ranged from 134.9 to 228.0 nm, while zeta potential results showed stable nanoparticles (-17.8 to -38.4 MV). The optimal formulation exhibited a maximum cumulative in vitro release of 72% (pH 4.2) up to 96 h. The cytotoxicity tests revealed the safety of TDF-loaded nanoparticles on vaginal epithelial cells at concentrations of 0.025 mg/mL, 0.5 mg/mL, and 1 mg/mL for 72 h. These results indicated that alginate-ES100 nanoparticles have the potential to preserve and sustain the release of the TDF drug in the FGT. The future goal is to develop a low-dose non-toxic microbicide that can be administered long term in the vagina to cater to both pregnant and non-pregnant HIV patients.

Piperine-loaded nanoparticles incorporated into hyaluronic acid/sodium alginate-based membranes for the treatment of inflammatory skin diseases

Piperine is an alkaloid mostly found in the fruits of several species of the Piper genus, and its anti-inflammatory potential is already known. However, its therapeutic applications still need to be better explored due to the low aqueous solubility of this active. To overcome this drawback, the objective of this work was to evaluate the efficiency of the nanoencapsulation of the compound as well as its incorporation into hyaluronic acid/alginate-based biomembranes. Polymeric nanoparticles composed of Eudragit S100 and Poloxamer 188 were obtained by the nanoprecipitation technique, obtaining spherical nanosized particles with an average diameter of 122.1 ± 2.0 nm, polydispersity index of 0.266, and encapsulation efficiency of 76.2 %. Hyaluronic acid/sodium alginate membranes were then prepared and characterized. Regarding permeation, a slow passage rate was observed until the initial 14 h, when an exponential increase in the recovered drug concentration began to occur. The in vivo assay showed a reduction in inflammation up to 43.6 %, and no cytotoxicity was observed. The results suggested the potential of the system developed for the treatment of inflammatory skin diseases.

Polysaccharides as wall materials in spray-dried microencapsulation of bioactive compounds: Physicochemical properties and characterization

Natural bioactive compounds (BCs) are types of chemicals found in plants and certain foods that promote good health, however they are sensitive to processing and environmental conditions. Microencapsulation by spray drying is a widely used and cost-effective approach to create a coating layer to surround and protect BCs and control their release, enabling the production of high functional products/ingredients with extended shelf life. In this process, wall materials determine protection efficiency, and physical properties, bioavailability, and storage stability of microencapsulated products. Therefore, an understanding of physicochemical properties of wall materials is essential for the successful and effective spray-dried microencapsulation process. Typically, polysaccharide-based wall materials are generated from more sustainable sources and have a wider range of physicochemical properties and applications compared to their protein-based counterparts. In this review, we highlight the essential physicochemical properties of polysaccharide-based wall materials for spray-dried microencapsulation of BCs including solubility, thermal stability, and emulsifying properties, rheological and film forming properties. We provide further insight into possibilities for the chemical structure modification of native wall materials and their controlled release behaviors. Finally, we summarize the most recent studies involving polysaccharide biopolymers as wall materials and/or emulsifiers in spray-dried microencapsulation of BCs.

Mesalazine and inflammatory bowel disease - From well-established therapies to progress beyond the state of the art

Inflammatory bowel disease incidence has been constantly rising for the past few decades. Current therapies attempt to mitigate its symptoms since no cure is established. The most commonly prescribed drug for these patients is 5-aminosalicylic acid (5-ASA). Due to the low rate and seriousness of side effects compared to other therapies, 5-ASA is still largely prescribed in many stages of inflammatory bowel disease, including scenarios where evidence suggests low effectiveness. Although commercialized formulations have come a long way in improving pharmacokinetics, it is still necessary to design and develop novel delivery systems capable of increasing effectiveness at different stages of the disease. In particular, micro- and nano-sized particles might be the key to its success in Crohn's disease and in more serious disease stages. This review provides an overview on the clinical significance of 5-ASA formulations, its limitations, challenges, and the most recent micro- and nanoparticle delivery systems being designed for its controlled release. Emergent alternatives for 5-ASA are also discussed, as well as the future prospects for its application in inflammatory bowel disease therapies.

Xylan microparticles for controlled release of mesalamine: Production and physicochemical characterization

Xylan extracted from corn cobs was used to produce mesalamine-loaded xylan microparticles (XMP5-ASA) by cross-linking polymerization using a non-hazardous cross-linking agent. The microparticles were characterized by thermal analysis (DSC/TG), X-ray diffraction (XRD), Infrared spectroscopy (FTIR-ATR) and scanning electron microscopy (SEM). A comparative study of the in vitro drug release from XMP5-ASA and from gastro-resistant capsules filled with XMP5-ASA (XMPCAP5-ASA) or 5-ASA was also performed. NMR, FTIR-ATR, XRD and DSC/TG studies indicated molecularly dispersed drug in the microparticles with increment on drug stability. The release studies showed that XMPCAP5-ASA allowed more efficient drug retention in the simulated gastric fluid and a prolonged drug release lasting up to 24 h. XMPCAP5-ASA retained approximately 48 % of its drug content after 6 h on the drug release assay. Thus, the encapsulation of 5-ASA into xylan microparticles together with gastro-resistant capsules allowed a better release control of the drug during different simulated gastrointestinal medium.

Fungicide-loaded and biodegradable xylan-based nanocarriers

The delivery of agrochemicals is typically achieved by the spraying of fossil-based polymer dispersions, which might accumulate in the soil and increase microplastic pollution. A potentially sustainable alternative is the use of biodegradable nano- or micro-formulations based on biopolymers, which can be degraded selectively by fungal enzymes to release encapsulated agrochemicals. To date, no hemicellulose nanocarriers for drug delivery in plants have been reported. Xylan is a renewable and abundant feedstock occurring naturally in high amounts in hemicellulose - a major component of the plant cell wall. Herein, xylan from corncobs was used to produce the first fungicide-loaded xylan-based nanocarriers by interfacial polyaddition in an inverse miniemulsion using toluene diisocyanate (TDI) as a crosslinking agent. The nanocarriers were redispersed in water and the aqueous dispersions were proven to be active in vitro against several pathogenic fungi, which are responsible for fungal plant diseases in horticulture or agriculture. Besides, empty xylan-based nanocarriers stimulated the growth of fungal mycelium, which indicated the degradation of xylan in the presence of the fungi, and underlined the degradation as a trigger to release a loaded agrochemical. This first example of crosslinked xylan-based nanocarriers expands the library of biodegradable and biobased nanocarriers for agrochemical release and might play a crucial role for future formulations in plant protection.

Water-in-Water Emulsion as a New Approach to Produce Mesalamine-Loaded Xylan-Based Microparticles

The water-in-water emulsion method has been reported as a technique able to prepare microparticles without using harmful solvents. However, there are few reports showing the encapsulation of small molecules into microparticles produced within this technique. The probable reason relays on the rapid diffusion of these molecules from the discontinuous phase to the continuous phase. In the present study, xylan microparticles containing mesalamine were produced and the doubled crosslinking approach, used to promote higher encapsulation rates, was disclosed. To achieve this goal, a 23 full factorial design was carried out. The results revealed that all formulations presented spherical-shaped microparticles. However, at specific conditions, only few formulations reached up to 50% of drug loading. In addition, the new xylan-based microparticles formulation retained almost 40% of its drug content after 12 h of a dissolution assay likely due to the degree of crosslinking. Thus, the doubled crosslinking approach used was effective on the encapsulation of mesalamine and may pave the way to successfully produce other polysaccharide-based carriers for clinical use.