1
|
Rajabimashhadi Z, Gallo N, Russo F, Ghiyami S, Mele C, Giordano ME, Lionetto MG, Salvatore L, Lionetto F. Production and physico-chemical characterization of nano-sized collagen from equine tendon. Int J Biol Macromol 2024; 277:134220. [PMID: 39069054 DOI: 10.1016/j.ijbiomac.2024.134220] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/27/2024] [Revised: 07/24/2024] [Accepted: 07/25/2024] [Indexed: 07/30/2024]
Abstract
In recent years, significant academic and commercial interest has focused on collagen derived from horse tendons, with potential applications across diverse sectors such as medicine, pharmaceuticals, and cosmetics. Nano collagen, with its enhanced wound penetration, improved cell contact, and heightened cellular regeneration and repair capabilities due to its high surface area, holds promise for a wide range of applications. In this study, we present a novel method for producing nano collagen from the equine tendon. Our approach is characterized by its speed, affordability, simplicity and environmentally friendly nature, with precise temperature-control to prevent collagen denaturation. We conducted a comprehensive characterization of the obtained samples, including assessments of morphology, chemical and thermal properties, particle size distribution and biocompatibility. Importantly, our results indicate improvements in thermal stability, and surface roughness of nano collagen, while preserving its molecular weight. These advancements expand the potential applications of nano collagen in various fields.
Collapse
Affiliation(s)
- Zahra Rajabimashhadi
- Department of Engineering for Innovation, University of Salento, via per Monteroni, Lecce, Italy
| | - Nunzia Gallo
- Department of Engineering for Innovation, University of Salento, via per Monteroni, Lecce, Italy; Typeone Biomaterials S.r.l., Via Europa 167, 73021 Calimera, Lecce, Italy
| | - Francesca Russo
- Department of Engineering for Innovation, University of Salento, via per Monteroni, Lecce, Italy
| | - Sajjad Ghiyami
- Department of Engineering for Innovation, University of Salento, via per Monteroni, Lecce, Italy
| | - Claudio Mele
- Department of Engineering for Innovation, University of Salento, via per Monteroni, Lecce, Italy
| | - Maria Elena Giordano
- Department of Biological and Environmental Sciences and Technologies, University of Salento, via per Monteroni, Lecce, Italy
| | - Maria Giulia Lionetto
- Department of Biological and Environmental Sciences and Technologies, University of Salento, via per Monteroni, Lecce, Italy
| | - Luca Salvatore
- Typeone Biomaterials S.r.l., Via Europa 167, 73021 Calimera, Lecce, Italy
| | - Francesca Lionetto
- Department of Engineering for Innovation, University of Salento, via per Monteroni, Lecce, Italy.
| |
Collapse
|
2
|
Prontera CT, Gallo N, Giannuzzi R, Pugliese M, Primiceri V, Mariano F, Maggiore A, Gigli G, Sannino A, Salvatore L, Maiorano V. Collagen Membrane as Water-Based Gel Electrolyte for Electrochromic Devices. Gels 2023; 9:gels9040310. [PMID: 37102922 PMCID: PMC10137362 DOI: 10.3390/gels9040310] [Citation(s) in RCA: 7] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/10/2023] [Revised: 03/31/2023] [Accepted: 04/04/2023] [Indexed: 04/28/2023] Open
Abstract
Bio-based polymers are attracting great interest due to their potential for several applications in place of conventional polymers. In the field of electrochemical devices, the electrolyte is a fundamental element that determines their performance, and polymers represent good candidates for developing solid-state and gel-based electrolytes toward the development of full-solid-state devices. In this context, the fabrication and characterization of uncrosslinked and physically cross-linked collagen membranes are reported to test their potential as a polymeric matrix for the development of a gel electrolyte. The evaluation of the membrane's stability in water and aqueous electrolyte and the mechanical characterization demonstrated that cross-linked samples showed a good compromise in terms of water absorption capability and resistance. The optical characteristics and the ionic conductivity of the cross-linked membrane, after overnight dipping in sulfuric acid solution, demonstrated the potential of the reported membrane as an electrolyte for electrochromic devices. As proof of concept, an electrochromic device was fabricated by sandwiching the membrane (after sulfuric acid dipping) between a glass/ITO/PEDOT:PSS substrate and a glass/ITO/SnO2 substrate. The results in terms of optical modulation and kinetic performance of such a device demonstrated that the reported cross-linked collagen membrane could represent a valid candidate as a water-based gel and bio-based electrolyte for full-solid-state electrochromic devices.
Collapse
Affiliation(s)
- Carmela Tania Prontera
- CNR NANOTEC-Institute of Nanotechnology c/o Campus Ecotekne, University of Salento, Via Monteroni, 73100 Lecce, Italy
| | - Nunzia Gallo
- Department of Engineering for Innovations, University of Salento, Via Monteroni, 73100 Lecce, Italy
| | - Roberto Giannuzzi
- CNR NANOTEC-Institute of Nanotechnology c/o Campus Ecotekne, University of Salento, Via Monteroni, 73100 Lecce, Italy
- Department of Mathematics and Physics "Ennio De Giorgi", University of Salento, Via per Arnesano, 73100 Lecce, Italy
| | - Marco Pugliese
- CNR NANOTEC-Institute of Nanotechnology c/o Campus Ecotekne, University of Salento, Via Monteroni, 73100 Lecce, Italy
| | - Vitantonio Primiceri
- CNR NANOTEC-Institute of Nanotechnology c/o Campus Ecotekne, University of Salento, Via Monteroni, 73100 Lecce, Italy
- Department of Mathematics and Physics "Ennio De Giorgi", University of Salento, Via per Arnesano, 73100 Lecce, Italy
| | - Fabrizio Mariano
- CNR NANOTEC-Institute of Nanotechnology c/o Campus Ecotekne, University of Salento, Via Monteroni, 73100 Lecce, Italy
| | - Antonio Maggiore
- CNR NANOTEC-Institute of Nanotechnology c/o Campus Ecotekne, University of Salento, Via Monteroni, 73100 Lecce, Italy
| | - Giuseppe Gigli
- CNR NANOTEC-Institute of Nanotechnology c/o Campus Ecotekne, University of Salento, Via Monteroni, 73100 Lecce, Italy
- Department of Mathematics and Physics "Ennio De Giorgi", University of Salento, Via per Arnesano, 73100 Lecce, Italy
| | - Alessandro Sannino
- Department of Engineering for Innovations, University of Salento, Via Monteroni, 73100 Lecce, Italy
| | - Luca Salvatore
- Department of Engineering for Innovations, University of Salento, Via Monteroni, 73100 Lecce, Italy
| | - Vincenzo Maiorano
- CNR NANOTEC-Institute of Nanotechnology c/o Campus Ecotekne, University of Salento, Via Monteroni, 73100 Lecce, Italy
| |
Collapse
|
3
|
Danielewska ME, Kostyszak MA, Sareło P, Gąsior-Głogowska M, Niemczyk M, Prządka P, Antończyk A, Kiełbowicz Z, Iskander DR. Indirectly assessing changes in corneal properties with OCT speckle after crosslinking in porcine eyes. Exp Eye Res 2022; 219:109051. [PMID: 35367416 DOI: 10.1016/j.exer.2022.109051] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/16/2021] [Revised: 02/25/2022] [Accepted: 03/22/2022] [Indexed: 11/04/2022]
Abstract
The aim of this study was to assess the effect of the standard crosslinking (CXL) procedure on corneal properties and subsequent changes in collagen bonds formation using optical coherence tomography (OCT) corneal speckle statistics and vibrational spectroscopy. Porcine eyes with intact corneal epithelium were randomly selected to one of the four study groups: (1) untreated eyes moistened with phosphate-buffered saline (PBS); (2) eyes after the epithelial debridement and riboflavin application; (3) eyes after CXL procedure according to the Dresden protocol; and (4) eyes after corneal epithelial debridement, regularly moistened with PBS. Before and after this selection, each eyeball was subjected to the constant intraocular pressure of 20 mmHg. Then, ocular biometry was performed and the central cornea was imaged using spectral-domain OCT. Following this, a nonparametric approach to speckle modeling (the Contrast Ratio (CR)) was utilized within the region of interest for each B-scan covering the central corneal stroma. To verify whether the CXL performed ex-vivo results in formation of new bonds in the cornea, Fourier Transform Infrared Attenuated Total Reflectance (ATR-FTIR) spectra of dried corneas, dissected from examined eyeballs, were collected and analyzed. Corneal epithelium removal alone or with the riboflavin application leads to a statistically significant decrease in the CR median value (the Wilcoxon signed-rank test, p < 0.05). However, the most pronounced change in CR median value, which decreases with the increased number of scatterers, was shown after the complete CXL procedure including riboflavin soaking and UVA irradiation (the Wilcoxon signed-rank test, p = 0.004). Analysis of ATR-FTIR spectra revealed influence of UVA irradiation on collagen matrix. The study has shown the increased dehydration accompanied by almost no alteration of collagen native triple-helical structure. Significant changes have been observed for bands related to collagen crosslinks. Specifically, the predominant changes occurred in the sugar region from 1150 to 975 cm-1, as well as in the absorbance of carbonyl groups. Furthermore, the ratio of two Amide I components at approximately 1660 cm-1 and 1675 cm-1 decreased after UVA irradiation. Together, these results provided the evidence for the creation of new corneal crosslinks. In conclusion, this study clearly indicates that the UVA exposure causes the substantial difference in optical scattering occurring in corneal stroma as a result of the induced biochemical changes at the molecular level in this tissue assessed with ATR-FTIR. The proposed speckle-based methodology brings a new insight into the development of OCT technology useful in an indirect assessment of some collagen changes.
Collapse
Affiliation(s)
- Monika E Danielewska
- Wrocław University of Science and Technology, Department of Biomedical Engineering, Wybrzeże Wyspiańskiego 27, 50-370, Wrocław, Poland.
| | - Małgorzata A Kostyszak
- Wrocław University of Science and Technology, Department of Biomedical Engineering, Wybrzeże Wyspiańskiego 27, 50-370, Wrocław, Poland.
| | - Przemysław Sareło
- Wrocław University of Science and Technology, Department of Biomedical Engineering, Wybrzeże Wyspiańskiego 27, 50-370, Wrocław, Poland.
| | - Marlena Gąsior-Głogowska
- Wrocław University of Science and Technology, Department of Biomedical Engineering, Wybrzeże Wyspiańskiego 27, 50-370, Wrocław, Poland.
| | - Marcela Niemczyk
- Wrocław University of Science and Technology, Department of Biomedical Engineering, Wybrzeże Wyspiańskiego 27, 50-370, Wrocław, Poland.
| | - Przemysław Prządka
- Wrocław University of Environmental and Life Sciences, Department and Clinic of Surgery, Faculty of Veterinary Medicine, Pl. Grunwaldzki 51, 50-366, Wrocław, Poland.
| | - Agnieszka Antończyk
- Wrocław University of Environmental and Life Sciences, Department and Clinic of Surgery, Faculty of Veterinary Medicine, Pl. Grunwaldzki 51, 50-366, Wrocław, Poland.
| | - Zdzisław Kiełbowicz
- Wrocław University of Environmental and Life Sciences, Department and Clinic of Surgery, Faculty of Veterinary Medicine, Pl. Grunwaldzki 51, 50-366, Wrocław, Poland.
| | - D Robert Iskander
- Wrocław University of Science and Technology, Department of Biomedical Engineering, Wybrzeże Wyspiańskiego 27, 50-370, Wrocław, Poland.
| |
Collapse
|
4
|
Investigating the histological and structural properties of tendon gel as an artificial biomaterial using the film model method in rabbits. J Exp Orthop 2022; 9:1. [PMID: 34978637 PMCID: PMC8724385 DOI: 10.1186/s40634-021-00434-y] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 08/18/2021] [Accepted: 11/23/2021] [Indexed: 11/10/2022] Open
Abstract
Purpose This study aimed to evaluate the properties of tendon gel by investigating the histological and structural differences among tendon gels under different preservation periods using a rabbit model. Methods Forty mature female rabbits were divided into four groups, each containing ten rabbits, on the basis of in-vivo preservation periods of tendon gels (3, 5, 10, and 15 days). We created the Achilles tendon rupture models using the film model method to obtain tendon gels. Tensile stress was applied to the tendon gel to promote maturation. Histological and structural evaluations of the tendon gel were performed before and after applying the tensile force, and the results obtained from the four groups were compared. Results Although the day-3 and day-5 tendon gels before applying tensile stress were histologically more immature than the day-10 and day-15 gels, type I collagen fibers equivalent to those of normal tendons were observed in all groups after the tensile process. Based on the surface and molecular structural evaluations, the day-3 tendon gels after the tensile process were molecularly cross-linked, and thick collagen fibers similar to those present in normal tendons were observed. Structural maturation observed in the day-3 tendon gels caused by traction was hardly observed in the day-5, -10, and -15 tendon gels. Conclusions The day-3 tendon gel had the highest regenerative potential to become a normal tendon by applying a traction force. Supplementary Information The online version contains supplementary material available at 10.1186/s40634-021-00434-y.
Collapse
|
5
|
Surgical Options for the Refractive Correction of Keratoconus: Myth or Reality. J Ophthalmol 2017; 2017:7589816. [PMID: 29403662 PMCID: PMC5748308 DOI: 10.1155/2017/7589816] [Citation(s) in RCA: 19] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/19/2017] [Accepted: 11/28/2017] [Indexed: 01/14/2023] Open
Abstract
Keratoconus provides a decrease of quality of life to the patients who suffer from it. The treatment used as well as the method to correct the refractive error of these patients may influence on the impact of the disease on their quality of life. The purpose of this review is to describe the evidence about the conservative surgical treatment for keratoconus aiming to therapeutic and refractive effect. The visual rehabilitation for keratoconic corneas requires addressing three concerns: halting the ectatic process, improving corneal shape, and minimizing the residual refractive error. Cross-linking can halt the disease progression, intrastromal corneal ring segments can improve the corneal shape and hence the visual quality and reduce the refractive error, PRK can correct mild-moderate refractive error, and intraocular lenses can correct from low to high refractive error associated with keratoconus. Any of these surgical options can be performed alone or combined with the other techniques depending on what the case requires. Although it could be considered that the surgical option for the refracto-therapeutic treatment of the keratoconus is a reality, controlled, randomized studies with larger cohorts and longer follow-up periods are needed to determine which refractive procedure and/or sequence are most suitable for each case.
Collapse
|
6
|
Kuzumaki T, Yamazaki K, Suzuki K, Torigoe K. Appropriate Tensile Mode and Timing of Applying Tension to Promote Tendon Gel Regeneration. Tissue Eng Regen Med 2017; 14:465-475. [PMID: 30603502 PMCID: PMC6171615 DOI: 10.1007/s13770-017-0050-5] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/15/2016] [Revised: 01/24/2017] [Accepted: 02/14/2017] [Indexed: 01/13/2023] Open
Abstract
"Tendon gel" secreted from a parent tendon is regenerated for tendon repair by applying tension. However, the details of the tensile stimulus have not been clarified. This study aimed to evaluate an appropriate tensile stimulus mode and the optimal timing of applying tension to promote tendon gel regeneration. Tendon gel was prepared using a film model method in mice and was preserved in vivo for 3, 5, and 10 days. Unlike tendon gel on day 3 or day 5, a fibrous structure developed in the tendon gel on day 10 when tension was applied. Infrared spectroscopy revealed that characteristic peaks appearing for the tendon gel on days 3 and 5 disappeared on day 10. Disappearance of the peaks indicated maturity of the tendon gel, and it showed the optimal timing for tension application to the tendon gel. The effect of tensile load on tendon gel preserved for 10 days was investigated using a tensile test, a creep test, or a cycle test. In the tensile test, tendon gel was elongated into a thin cord of collagen fibers with an increase in stress, and the maximum diameter of the collagen fiber was approximately 50 times larger than that in the normal Achilles tendon of mice. The results suggest that the diameter of the oriented collagen fiber is controllable by adjusting the applied load and the time in mature tendon gel.
Collapse
Affiliation(s)
- Toru Kuzumaki
- Graduate School of Engineering, Tokai University, Hiratsuka, Kanagawa 259-1292 Japan
| | - Katsufumi Yamazaki
- Graduate School of Engineering, Tokai University, Hiratsuka, Kanagawa 259-1292 Japan
| | - Keiichi Suzuki
- Graduate School of Engineering, Tokai University, Hiratsuka, Kanagawa 259-1292 Japan
| | - Kojun Torigoe
- Department of Anatomy, Tokai University School of Medicine, Isehara, Kanagawa 259-1193 Japan
| |
Collapse
|