An "appropriate technology" trans-femoral prosthesis, using materials available in Nepal

Cross-Cultural Adaptation and Validation of The Nepali Version of The Prosthetic Limb Users Survey of Mobility Short-Form (Plus-M™/Nepali-12Sf) In Lower Limb Prosthesis Users

BACKGROUND

Objective mobility measurement of Nepali prosthesis users is lacking.

OBJECTIVE

The objective of this study was to cross-culturally adapt, translate and evaluate construct validity of the Prosthetic Limb Users Survey of Mobility (PLUS-M™/Nepali-12 Short Form (SF)) instrument in lower limb prosthesis users residing in Nepal.

METHODOLOGY

Two forward translations, review and reconciliation, back translation, expert review, developer review to create the PLUS-M™/Nepali-12SF. Psychometric testing for internal consistency, test-retest reliability and construct validity against the Two-Minute Walk Test (2MWT) and Amputee Mobility Predictor with Prosthesis (AMPPRO) were performed on sixty-six lower limb prosthesis users.

FINDINGS

The majority of populations were with transtibial amputation 45 (68%), with transfemoral amputation 15 (23%), with knee disarticulation 5 (7.5%) and with syme's amputation 1 (1.5%). The most common cause of amputation among the population was trauma and the least was tumor. Chronbach's alpha for the PLUS-M™/Nepali-12SF was 0.90, mean T-Score was 52.90, test-retest intraclass correlation coefficient (ICC) was 0.94 (95% confidence interval 0.90-0.96). Construct validity with the 2MWT was good (r = 0.62, p< 0.001) and moderately positive with the AMPPRO (r = 0.57, p< 0.001).

CONCLUSION

Our research evidenced that the PLUS-M™/Nepali-12SF had excellent reproducibility. The significance of this work is that it may allow for the measurement of mobility in austere locations of Nepal.

Assessment of the availability of technology for trauma care in Nepal

BACKGROUND

We sought to assess the availability of technology-related equipment for trauma care in Nepal and to identify factors leading to optimal availability as well as deficiencies. We also sought to identify potential solutions addressing the deficits in terms of health systems management and product development.

METHODS

Thirty-two items for large hospitals and sixteen items for small hospitals related to the technological aspect of trauma care were selected from the World Health Organization's Guidelines for Essential Trauma Care for the current study. Fifty-six small and 29 large hospitals were assessed for availability of these items in the study area. Site visits included direct inspection and interviews with administrative, clinical, and bioengineering staff.

RESULTS

Deficiencies of many specific items were noted, including many that were inexpensive and which could have been easily supplied. Shortage of electricity was identified as a major infrastructural deficiency present in all parts of the country. Deficiencies of pulse oximetry and ventilators were observed in most hospitals, attributed in most part to frequent breakdowns and long downtimes because of lack of vendor-based service contracts or in-house maintenance staff. Sub-optimal oxygen supply was identified as a major and frequent deficiency contributing to disruption of services. All equipment was imported except for a small percent of suction machines and haemoglobinometers.

CONCLUSIONS

The study identified a range of items which were deficient and whose availability could be improved cost-effectively and sustainably by better planning and organisation. The electricity deficit has been dealt with successfully in a few hospitals via direct feeder lines and installation of solar panels; wider implementation of these methods would help solve a large portion of the technological deficiencies. From a health systems management view-point, strengthening procurement and stocking of low cost items especially in remote parts of the country is needed. From a product development view-point, there is a need for robust pulse-oximeters and ventilators that are lower cost and which have longer durability and less need for repairs. Increasing capabilities for local manufacture is another potential method to increase availability of a range of equipment and spare parts.

Assistive technology in developing countries: a review from the perspective of the Convention on the Rights of Persons with Disabilities

BACKGROUND

The 'Convention on the Rights of Persons with Disabilities' (CRPD) requires governments to meet the assistive technology needs of citizens. However, the access to assistive technology in developing countries is severely limited, which is aggravated by a lack of related services.

OBJECTIVES

To summarize current knowledge on assistive technology for low- and lower-middle-income countries published in 1995 or later, and to provide recommendations that facilitate implementation of the CRPD.

STUDY DESIGN

Literature review.

METHODS

Literature was searched in web-based databases and reference lists. Studies carried out in low- and lower-middle-income countries, or addressing assistive technology for such countries, were included.

RESULTS

The 52 included articles are dominated by product oriented research on leg prostheses and manual wheelchairs. Less has been published on hearing aids and virtually nothing on the broad range of other types of assistive technology.

CONCLUSIONS

To support effective implementation of the CRPD in these countries, there is a need for actions and research related particularly to policies, service delivery, outcomes and international cooperation, but also to product development and production.

CLINICAL RELEVANCE

The article has a potential to contribute to CRPD compliant developments in the provision of assistive technology in developing countries by providing practitioners with an overview of published knowledge and researchers with identified research needs.

Lower-limb prosthetic technologies in the developing world: A review of literature from 1994-2010

In the mid-1990s, a number of key publications and meetings of experts identified major technical issues associated with prosthetic technologies intended for developing countries. These included inadequate durability of prosthetic feet, poor socket quality and prosthetic fit, improper alignment of prostheses, and inferior function of components. To examine the progress that has been made since then in addressing these issues, a comprehensive review of literature was performed. In total, 106 articles were selected and included in the review. The review examined prosthetic technologies categorized into feet and ankles, knees, sockets and suspension, and materials, structures, and alignment methods. Moreover, publications were categorized as technical development, clinical (lab-based) testing, or clinical field testing studies. The results reveal important work that has been carried out to develop and implement standardized outcome measures during field testing, allowing various existing prosthetic technologies to be evaluated in terms of their use, function, durability, and other factors. Progress has also been made toward addressing the aforementioned limitations of prosthetic technologies, however, more research and development is required. This includes improving the durability of the external cosmetic features of prosthetic feet, developing more functional prosthetic knee joints, and simplifying fabrication techniques to further improve outcomes associated with socket fit and prosthetic alignment. Research and development collaborations between developed and developing countries, and the dissemination of ongoing research, development, and evaluation activities are essential to the advancement of prosthetic technologies in these regions.

Characterisation of prosthetic feet used in low-income countries

Eleven kinds of prosthetic feet that were designed for use in low-income countries were mechanically characterised in this study. Masses of the different kinds of prosthetic feet varied substantially. Dynamic properties, including damping ratios and resonant frequencies, were obtained from step unloading tests of the feet while interacting with masses comparable to the human body. Data showed that for walking, the feet can be appropriately modeled using their quasistatic properties since natural frequencies were high compared to walking frequencies and since damping ratios were small. Roll-over shapes, the effective rocker (cam) geometries that the feet deform to under walking loads, were determined using a quasistatic loading technique and a spatial transformation of the ground reaction force's centre of pressure. The roll-over shapes for most of the prosthetic feet studied were similar to the roll-over shape of the SACH (solid-ankle cushioned heel) prosthetic foot. All roll-over shapes showed a lack of forefoot support, which may cause a "drop-off" experience at the end of single limb stance and shorter step lengths of the contralateral limb. The roll-over shapes of prosthetic feet appear useful in characterization of foot function.