Dynamic electrostatic charge of lactose-salbutamol sulphate powder blends dispersed from a Cyclohaler®

Discrete Element Method Evaluation of Triboelectric Charging Due to Powder Handling in the Capsule of a DPI

The generation and accumulation of an electrostatic charge from handling pharmaceutical powders is a well-known phenomenon, given the insulating nature of most APIs (Active Pharmaceutical Ingredients) and excipients. In capsule-based DPIs (Dry Powder Inhalers), the formulation is stored in a gelatine capsule placed in the inhaler just before inhalation. The action of capsule filling, as well as tumbling or vibration effects during the capsule life cycle, implies a consistent amount of particle-particle and particle-wall contacts. A significant contact-induced electrostatic charging can then take place, potentially affecting the inhaler's efficiency. DEM (Discrete Element Method) simulations were performed on a carrier-based DPI formulation (salbutamol-lactose) to evaluate such effects. After performing a comparison with the experimental data on a carrier-only system under similar conditions, a detailed analysis was conducted on two carrier-API configurations with different API loadings per carrier particle. The charge acquired by the two solid phases was tracked in both the initial particle settling and the capsule shaking process. Alternating positive-negative charging was observed. Particle charging was then investigated in relation to the collision statistics, tracking the particle-particle and particle-wall events for the carrier and API. Finally, an analysis of the relative importance of electrostatic, cohesive/adhesive, and inertial forces allowed the importance of each term in determining the trajectory of the powder particles to be estimated.

Segregation in inhalable powders: Quantification of the effect of vibration on adhesive mixtures

The objective of this investigation was to study the effect of induced vibrations on adhesive mixtures containing budesonide and salbutamol sulphate as active pharmaceutical ingredients (APIs) and InhaLac 70 as carrier. A series of adhesive mixtures with varied API concentration (1-4%) was prepared for each API. Half of the adhesive mixture was stressed on a vibrating sieve under conditions resembling hopper flow. Based on scanning electron micrographs, it was concluded that InhaLac 70 contains particles of two distinct shapes, one irregular with groves and valleys and the other more regular with well defined edges. The dispersibility of the control and stressed mixtures was studied using a next generation impactor. The stressed mixtures containing 1 and 1.5% API displayed a significant reduction in fine particle dose (FPD) compared to the control. The reduction in FPD resulted from a loss of API from the adhesive mixture during vibration and as a consequence of restructuring and self agglomeration resulting in reduced dispersibility. However, no significant difference was observed for mixtures with larger weight fractions of API (2 and 4% API) but these have a drawback of reduced fine particle fraction (FPF). It is concluded that vibrations induced on the adhesive mixtures during handling potentially have a significant effect on the dispersibility of the API and the total amount of drug delivered to the lungs.

Electrostatics in pharmaceutical aerosols for inhalation

Electrostatics continues to play an important role in pharmaceutical aerosols for inhalation. Despite its ubiquitous nature, the charging process is complex and not well understood. Nonetheless, significant advances in the past few years continue to improve understanding and lead to better control of electrostatics. The purpose of this critical review is to present an overview of the literature, with an emphasis on how electrostatic charge can be useful in improving pulmonary drug delivery.