“Vitamin E” fortified parenteral lipid emulsions: Plackett–Burman screening of primary process and composition parameters

Characterization and Exploration of Placket-Burman-Designed Porous Calcium Carbonate (Vaterite) Microparticles

The objective of the research was to identify significant variables that impact the porosity-related properties of CaCO3 particles. The Placket-Burman design was employed to screen multiple variables, including pH, molar concentrations of calcium chloride and sodium carbonate, temperature, concentration of Gelucire 44/14, Cremophor RH40, Solutol HS15, Labrasol, mixing rate, reaction time, and order of addition. The response variables were surface area, pore radius, and pore volume. Influential methodologies such as XRD, FTIR, Raman spectroscopy, and TGA were utilized to validate the precipitate type. The BET surface area ranged from 1.5 to 16.14 m2/g, while the pore radius varied from 2.62 to 6.68 nm, and the pore volume exhibited a range of 2.43 to 37.97 cc/gm. Vaterite structures with spherical mesoporous characteristics were observed at high pH, whereas calcite formations occurred at low pH. The order of addition impacted the surface area but did not affect the pore volume. To maximize the surface area, a lower reaction time and molar concentrations of sodium carbonate were found to be advantageous. The pore radius was influenced by the pH, surfactants, and reaction conditions. The sediments were categorized based on the percentage of vaterite formation. The instrumental techniques effectively characterized the precipitates and provided a valuable complementary analysis.

Application of in vitro lipolysis for the development of oral self-emulsified delivery system of nimodipine

The objective of the current study was to optimize for the first time the formulation variables of self-emulsified drug delivery system (SEDDS) based on drug solubilization during lipolysis under a biorelevant condition of digestion such as lipase activity, temperature, pH, fed-fasting state, etc. Nimodipine (ND), a BCS class II, was used as a model drug to prepare the SEDDS. Various oils, surfactants, and cosurfactants were screened for their solubilization potential of ND. Area of self-emulsification was identified using various ternary phase diagrams. Box-Behnken design was employed to investigate effects of formulation variables on various dispersion, emulsification, and lipolysis characteristics of SEDDS. Among 26 candidate formulations, highest ND solubility of 12.72%, 11.09% and 11.2% w/w were obtained in peppermint oil as the oily phase, Cremphor EL as the surfactant and PEG400 as the cosurfactant, respectively. Cremphor EL was the most significant factor to decrease SEDDS droplet size to 30.16 nm. On the other hand, increasing the oil concentration was found to significantly increase the polydispersity index up to 0.31. A faster emulsification rate of 3.37%/min was obtained at higher Cremphor El/PEG 400 ratio. Increasing the percentage of lipid components of SEDDS resulted in lower rate of lipolysis with less recovery of ND in aqueous phase. Under fed state, percentage of lipolysis of optimized formulation was less than that observed under fasted state. However, lowest rate and percentage of lipolysis were observed in lipolysis media without phospholipids and bile salts. Hence, this study demonstrated that in vitro lipolysis could be used as a surrogate approach to distinguish effects of formulation variables on fate of SEDDS upon digestion. Further studies are in progress to identify the lipolytic products of the employed excipients by LC-MS/MS.

PEGylated γ-tocotrienol isomer of vitamin E: Synthesis, characterization, in vitro cytotoxicity, and oral bioavailability

Vitamin E refers to a family of eight isomers divided into two subgroups, tocopherols and the therapeutically active tocotrienols (T3). The PEGylated α-tocopherol isomer of vitamin E (vitamin E TPGS) has been extensively investigated for its solubilizing capacity as a nonionic surfactant in various drug delivery systems. Limited information, however, is available about the PEG conjugates of the tocotrienol isomers of vitamin E. In this study two PEGylated γ-T3 variants with mPEG molecular weights of 350 (γ-T3PGS 350) and 1000 (γ-T3PGS 1000) were synthesized by a two-step reaction procedure and characterized by (1)H NMR, HPLC, and mass spectroscopy. The physical properties of their self-assemblies in water were characterized by zeta, CMC, and size analysis. Similar physical properties were found between the PEGylated T3 and vitamin E TPGS. PEGylated T3 were also found to retain the in vitro cytotoxic activity of the free T3 against the MCF-7 and the triple-negative MDA-MB-231 breast cancer cells. PEGylated γ-T3 also increased the oral bioavailability of γ-T3 by threefolds when compared to the bioavailability of γ-T3 formulated into a self-emulsified drug delivery system. No significant differences in biological activity were found between the PEG 350 and 100 conjugates. Results from this study suggest that PEGylation of γ-T3 represents a viable platform for the oral and parenteral delivery of γ-T3 for potential use in the prevention of breast cancer.

δ-Tocotrienol oxazine derivative antagonizes mammary tumor cell compensatory response to CoCl2-induced hypoxia

In response to low oxygen supply, cancer cells elevate production of HIF-1α, a hypoxia-inducible transcription factor that subsequently acts to stimulate blood vessel formation and promote survival. Studies were conducted to determine the role of δ-tocotrienol and a semisynthetic δ-tocotrienol oxazine derivative, compound 44, on +SA mammary tumor cell hypoxic response. Treatment with 150 µM CoCl₂ induced a hypoxic response in +SA mammary tumor cells as evidenced by a large increase in HIF-1α levels, and combined treatment with compound 44 attenuated this response. CoCl₂-induced hypoxia was also associated with a large increase in Akt/mTOR signaling, activation of downstream targets p70S6K and eIF-4E1, and a significant increase in VEGF production, and combined treatment with compound 44 blocked this response. Additional in vivo studies showed that intralesional treatment with compound 44 in BALB/c mice bearing +SA mammary tumors significantly decreased the levels of HIF-1α, and this effect was associated with a corresponding decrease in Akt/mTOR signaling and activation of downstream targets p70S6kinase and eIF-4E1. These findings demonstrate that treatment with the δ-tocotrienol oxazine derivative, compound 44, significantly attenuates +SA mammary tumor cell compensatory responses to hypoxia and suggests that this compound may provide benefit in the treatment of rapidly growing solid breast tumors.

Curcumin-loaded solid lipid nanoparticles with Brij78 and TPGS improved in vivo oral bioavailability and in situ intestinal absorption of curcumin

PURPOSE

The present study was to formulate curcumin solid lipid nanoparticles (Cur-SLNs) with P-gp modulator excipients, TPGS and Brij78, to enhance the solubility and bioavailability of curcumin.

METHODS

The formulation was optimized by Plackett-Burman screening design and Box-Behnken experiment design. Then physiochemical properties, entrapment efficiency and in vitro release of Cur-SLNs were characterized. In vivo pharmacokinetics study and in situ single-pass intestinal perfusion were performed to investigate the effects of Cur-SLNs on the bioavailability and intestinal absorption of curcumin.

RESULTS

The optimized formulations showed an average size of 135.3 ± 1.5 nm with a zeta potential value of -24.7 ± 2.1 mV and 91.09% ± 1.23% drug entrapment efficiency, meanwhile displayed a sustained release profile. In vivo pharmacokinetic study showed AUC0→t for Cur-SLNs was 12.27-folds greater than curcumin suspension and the relative bioavailability of Cur-SLNs was 942.53%. Meanwhile, Tmax and t(1/2) of curcumin for Cur-SLNs were both delayed comparing to the suspensions (p < 0.01). The in situ intestinal absorption study revealed that the effective permeability (Peff) value of curcumin for SLNs was significantly improved (p < 0.01) comparing to curcumin solution.

CONCLUSION

Cur-SLNs with TPGS and Brij78 could improve the oral bioavailability and intestinal absorption of curcumin effectively.

Effect of lipid viscosity and high-pressure homogenization on the physical stability of "Vitamin E" enriched emulsion

Recently there has been a growing interest in vitamin E for its potential use in cancer therapy. The objective of this work was therefore to formulate a physically stable parenteral lipid emulsion to deliver higher doses of vitamin E than commonly used in commercial products. Specifically, the objectives were to study the effects of homogenization pressure, number of homogenizing cycles, viscosity of the oil phase, and oil content on the physical stability of emulsions fortified with high doses of vitamin E (up to 20% by weight). This was done by the use of a 27-run, 4-factor, 3-level Box-Behnken statistical design. Viscosity, homogenization pressure, and number of cycles were found to have a significant effect on particle size, which ranged from 213 to 633 nm, and on the percentage of vitamin E remaining emulsified after storage, which ranged from 17 to 100%. Increasing oil content from 10 to 20% had insignificant effect on the responses. Based on the results it was concluded that stable vitamin E rich emulsions could be prepared by repeated homogenization at higher pressures and by lowering the viscosity of the oil phase, which could be adjusted by blending the viscous vitamin E with medium-chain triglycerides (MCT).

Formulation and optimization of nonionic surfactants emulsified nimesulide-loaded PLGA-based nanoparticles by design of experiments

This investigation aimed to develop nimesulide (NMS)-loaded poly(lactic-co-glycolic acid) (PLGA)-based nanoparticulate formulations as a biodegradable polymeric drug carrier to treat rheumatoid arthritis. Polymeric nanoparticles (NPs) were prepared with two different nonionic surfactants, vitamin E d-α-tocopheryl polyethylene glycol 1000 succinate (vitamin E TPGS) and poly(vinyl alcohol) (PVA), using an ultrasonication solvent evaporation technique. Nine batches were formulated for each surfactant using a 3(2) factorial design for optimal concentration of the emulsifying agents, 0.03-0.09% for vitamin E TPGS and 2-4% for PVA. The surfactant percentage and the drug/polymer ratio (1:10, 1:15, 1:20) of the NMS-loaded NPs were investigated based on four responses: encapsulation efficiency, particle size, the polydispersity index, and the surface charge. The response surface plots and linearity curves indicated a relationship between the experiment's responses and a set of independent variables. The NPs produced with both surfactants exhibited a negative surface charge, and scanning electron micrographs revealed that all of the NPs were spherical in shape. A narrower size distribution and higher drug loadings were achieved in PVA-emulsified PLGA NPs than in the vitamin E TPGS emulsified. Decreasing amounts of both nonionic surfactants resulted in a reduction in the emulsion's viscosity, which led to a decrease in the particle size of NPs. According to the ANOVA results obtained in this present research, vitamin E TPGS exhibited the best correlation between the independent variables, namely drug/polymer ratio and the surfactant percentage, and the dependent variables (encapsulation efficiency R(2) = 0.9603, particle size R(2) = 0.9965, size distribution R(2) = 0.9899, and surface charge R(2) = 0.8969) compared with PVA.

Effect of PEG surface conformation on anticancer activity and blood circulation of nanoemulsions loaded with tocotrienol-rich fraction of palm oil

Tocotrienol-rich fraction of palm oil, which contains the isomers of vitamin E, was shown to possess potent anticancer activity against mammary adenocarcinoma cell lines. Its clinical use, however, is limited by poor oral bioavailability and short half-life. Previously, we developed tocotrienol-rich lipid nanoemulsions for intravenous administration. The objective of this study was to investigate the effect of surface grafted polyethylene glycol (PEG) on the properties of the nanoemulsions. PEGylation was achieved by the addition of equimolar PEG groups using poloxamer or 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[amino(polyethylene glycol)2000] (PEG2000-DSPE). The effect of PEG surface topography on the antiproliferative activity of nanoemulsions against mammary adenocarcinoma cells, their susceptibility to protein adsorption, and its effect on blood hemolysis and circulation time was investigated. Nanoemulsions PEGylated with poloxamer or PEG2000-DSPE were stable under physical stress. Poloxamer nanoemulsion, however, displayed higher uptake and potency against MCF-7 tumor cells in 2D and 3D culture and increased hemolytic effect and susceptibility to IgG adsorption, which was reflected in its rapid clearance and short circulation half-life (1.7 h). Conversely, PEGylation with PEG2000-DSPE led to a 7-fold increase in mean residence time (12.3 h) after IV injection in rats. Reduced activity in vitro and improved circulation time suggested strong shielding of plasma proteins from the droplets. Differences between the nanoemulsions were attributed to polymer imbibitions and the differences in PEG conformation and density on the surface of the droplets.