Development of molecularly imprinted polymer as sustain release drug carrier for propranolol HCL

Synthesis, Evaluation, and Characterization of an Ergotamine Imprinted Styrene-Based Polymer for Potential Use as an Ergot Alkaloid Selective Adsorbent

Alkaloid toxicities negatively impact livestock health and production. To assess alkaloid occurrences, adsorbent technologies may offer effective means to their extraction and isolation from a complex feed matrix. In this study, molecularly imprinted polymers (MIPs) were synthesized and evaluated for their specificity of binding to various ergot alkaloids. Co-polymers of styrene and hydroxyethyl methacrylate were synthesized in the absence or presence of an ergotamine (ETA) template, yielding non-imprinted polymer (NIP) and molecularly imprinted polymer (MIP), respectively. The influence of parameters such as pH, temperature, and initial concentration on the adsorption of ergot alkaloids was evaluated along with their application as solid phase extraction materials. Chemical and morphological properties were characterized. Adsorption was generally greater for MIP compared to NIP. Cross-reactivity with related alkaloids existed due to similarities in structure and functional groups and was dependent on the type and concentration of alkaloid and polymer type (alkaloid type × concentration × product; P < 0.05). The pH of the medium had no influence on the binding properties of polymers toward ETA within a pH range of 2-10. Binding was independent of temperature between 36 and 42 °C. When kinetics of adsorption were evaluated, the Langmuir isotherm had a better fit (R ² > 0.95) to adsorption equilibrium data than the Freundlich equation. The maximum amounts adsorbed (Q _o) from the Langmuir model were 8.68 and 7.55 μM/g for MIP and NIP, respectively. Fourier transform infrared, scanning and tandem electron microscopy, and Brunauer-Emmett-Teller analysis confirmed a highly porous MIP structure with a greater surface area compared to NIP. Binding characteristics evaluated with computational strategy using molecular docking experiments and in vitro in a complex media (rumen fluid) indicated a stronger ETA adsorption by the tested composition selected among other polymeric materials and affinity of MIP compared with NIP. This study suggested the possible utility of MIP as a solid phase extraction sorbent for applications in analytical chemistry or sensing devices tailored to track ergot alkaloid incidence and the fate of those alkaloids in complex ruminal digestive samples.

Vinblastine-Loaded Nanoparticles with Enhanced Tumor-Targeting Efficiency and Decreasing Toxicity: Developed by One-Step Molecular Imprinting Process

Molecularly imprinted polymers have exhibited good performance as carriers on drug loading and sustained release. In this paper, vinblastine (VBL)-loaded polymeric nanoparticles (VBL-NPs) were prepared by a one-step molecular imprinting process, avoiding the waste and incomplete removal of the template, and evaluated as targeting carriers for VBL delivery after modification. Using acryloyl amino acid comonomers and disulfide cross-linkers, VBL-NPs were synthesized and then conjugated with poly(ethylene glycol)-folate. The dynamic size of the obtained VBL-NPs-PEG-FA was 258.3 nm (PDI = 0.250), and the encapsulation efficiency was 45.82 ± 1.45%. The nanoparticles of VBL-NPs-PEG-FA were able to completely release VBL during 48 h under a mimic tumor intracellular condition (pH 4.5, 10 mM glutathione (GSH)), displaying significant redox responsiveness, whereas the release rates were much slower in the mimic body liquid (pH 7.4, 2 μM GSH) and tumor extracellular environment (pH 6.5, 2 μM GSH). Furthermore, the carriers NPs-PEG-FA, prepared without VBL, showed satisfactory intrinsic hemocompatibility, cellular compatibility, and tumor-targeting properties: they could rapidly and efficiently accumulate to folate receptor positive Hela cells and then internalized via receptor-mediated endocytosis, and the retention in tumor tissues could last for over 48 h. Interestingly, VBL-NPs-PEG-FA could evidently increase the accumulation of VBL in tumor tissues while decreasing the distribution of VBL in organs, exert similar anticancer efficacy against Hela tumors in the xenograft model of nude mice to VBL injection, and significantly improve the abnormality of liver and spleen observed in VBL injection. VBL-NPs-PEG-FA has the potential to be the delivery carrier for VBL by enhancing the tumor-targeting efficacy of VBL and decreasing toxicity to normal tissues.

Ionic liquids as porogens for molecularly imprinted polymers: propranolol, a model study

The selectivity and rebinding capacity of molecularly imprinted polymers selective for propranolol (1) using the room temperature ionic liquids [BMIM][BF4], [BMIM][PF6], [HMIM][PF6] and [OMIM][PF6] and CHCl3 were examined. The observed IF (imprinting factor) values for MIPBF4, MIPPF6 and MIPCHCl3 were 1.0, 1.98 and 4.64, respectively. The longer chain HMIM and OMIM systems returned lower IF values of 1.1 and 2.3, respectively. MIPPF6 also showed a 25% binding capacity reduction vs. MIPCHCl3 (5 μmol g(−1)vs. 7 μmol g(−1) respectively). MIPCHCl3 and MIPPF6 differed in terms of BET surface area (306 m(2) g(−1)vs. 185 m(2) g(−1)), pore size (1.10 and 2.19 nm vs. 0.97 and 7.06 nm), the relative number of pores (Type A: 10.4 vs. 7.5%; Type B: 8.5 vs. 3.0%), and surface zeta potential (−37.9 mV vs. −20.3 mV). The MIP specificity for 1 was examined by selective rebinding studies with caffeine (2) and ephedrine (3). MIPPF6 rebound higher quantities of 2 than MIPCHCl3, but this was largely due to non-specific binding. Both MIPCHCl3 and MIPPF6 showed a higher affinity for 3 than for 2. Reduction in the Room Temperature Ionic Liquid (RTIL) porogen volume had little impact on the polymer morphology, but did result in a modest decrease in IF from 2.6 to 2.3 and in the binding capacity (30% to 19%). MIPCHCl3 retained the highest template specificity on rebinding from CHCl3 (IF = 4.6) dropping to IF = 0.6 in MeOH/[BMIM][PF6]. The MIPCHCl3 binding capacity remained constant using CHCl3, CH2Cl2 and MeOH (46–52%), dropped to 6% on addition of [BMIM][PF6] and increased to 83% in H2O (but at the expense of specificity with IFH2O = 1.4). MIPPF6 rebinding from MeOH saw an increase in specific rebinding to IF = 4.9 and also an increase in binding capacity to 48% when rebinding 1 from MeOH and to 42% and 45% with H2O and CH2Cl2, respectively, although in the latter case the increased capacity was at the cost of specificity with IFCH2Cl2 = 1.2. Overall the MIPPF6 capacity and specificity were enhanced on addition of MeOH.

Detection of nitrobenzene compounds in surface water by ion mobility spectrometry coupled with molecularly imprinted polymers

Ion mobility spectrometry (IMS) was explored in the selective detection of nitrobenzene compounds in industrial waste water and surface water, and the selectivity was theoretically elucidated with the transformation energy in the product ion formation reaction. A linear detection range of 0.5-50 ppm and a limit of detection (LOD) of 0.1 ppm were found for 2,4,6-trinitrotoluene (TNT). With the IMS as the detection system of molecularly imprinted polymer (MIP) separation technique, the MIP-IMS system was proved to be excellent method to detect trace amount of nitrobenzene compounds in surface water, in which more than 87% of nitrobenzene compounds could be adsorbed on MIPs with 90-105% of recovery.