Enhanced topical delivery of tacrolimus by a carbomer hydrogel formulation with transcutol P

Gel Formulations with an Echinocandin for Cutaneous Candidiasis: The Influence of Azone and Transcutol on Biopharmaceutical Features

Caspofungin is a drug that is used for fungal infections that are difficult to treat, including invasive aspergillosis and candidemia, as well as other forms of invasive candidiasis. The aim of this study was to incorporate Azone in a caspofungin gel (CPF-AZ-gel) and compare it with a promoter-free caspofungin gel (CPF-gel). An in vitro release study using a polytetrafluoroethylene membrane and ex vivo permeation into human skin was adopted. The tolerability properties were confirmed by histological analysis, and an evaluation of the biomechanical properties of the skin was undertaken. Antimicrobial efficacy was determined against Candida albicans, Candida glabrata, Candida parapsilosis, and Candida tropicalis. CPF-AZ-gel and CPF-gel, which had a homogeneous appearance, pseudoplastic behavior, and high spreadability, were obtained. The biopharmaceutical studies confirmed that caspofungin was released following a one-phase exponential association model and the CPF-AZ gel showed a higher release. The CPF-AZ gel showed higher retention of caspofungin in the skin while limiting the diffusion of the drug to the receptor fluid. Both formulations were well-tolerated in the histological sections, as well as after their topical application in the skin. These formulations inhibited the growth of C. glabrata, C. parapsilosis, and C. tropicalis, while C. albicans showed resistance. In summary, dermal treatment with caspofungin could be used as a promising therapy for cutaneous candidiasis in patients that are refractory or intolerant to conventional antifungal agents.

Assessing the Solubility of Baricitinib and Drug Uptake in Different Tissues Using Absorption and Fluorescence Spectroscopies

The low water solubility of baricitinib (BCT) limits the development of new formulations for the topical delivery of the drug. The aims of this study were to assess the solubility of BCT in different solvents, including Transcutol, a biocompatible permeation enhancer that is miscible in water, to evaluate the drug uptake in human skin and porcine tissues (sclera, cornea, oral, sublingual, and vaginal), and to subsequently extract the drug from the tissues so as to determine the drug recovery using in vitro techniques. Analytical methods were developed and validated for the quantification of BCT in Transcutol using absorption and fluorescence spectroscopies, which are complementary to each other and permit the detection of the drug across a broad range of concentrations. Results show that Transcutol permits an increased drug solubility, and that BCT is able to penetrate the tissues studied. The solutions of BCT in Transcutol were stable for at least one week. Hence, Transcutol may be a suitable solvent for further development of topical formulations.

Preparation and In Vitro and In Vivo Evaluation of a Testosterone Film Forming Gel for the Treatment of Hypoactive Sexual Desire Disorder in Women

Hypoactive sexual desire disorder (HSDD) is one of the most common sexual complaints in women. Currently, there is an unmet need for a drug treatment for this disorder. The purpose of this study was to develop a testosterone (TS) film forming gel used for women to treat HSDD by measuring the tackiness, peel adhesion force, tensile strength, and elasticity of the formulation. Diethylene glycol monoethyl ether (Transcutol P), an efficient penetration enhancer, was added to the optimized formulation and the transdermal permeation characteristics in vitro were studied using Franz-diffusion cells. The quantitative determination of TS was performed by high-performance liquid chromatography (HPLC). After 24 h, Transcutol P at 3% had the largest cumulative amount of drug and enhancement ratio of TS of 75.14 μg/cm² and 2.82, respectively. After the screening of film forming polymers and penetration enhancers, the optimal formulation was as follows: glycerol (1%, w/w); 12.5% sodium carboxymethylcellulose (CMC-Na) aqueous solution (0.5%, w/w); 2.5% Carbomer ethanol solution (0.5%, w/w); Transcutol P ethanol solution (3%, w/w) containing 0.5% TS; and 8% Poly vinyl alcohol (PVA) aqueous solution (30%, w/w). The optimized film forming gel had good uniformity and the release of TS in vitro was close to 100% within 24 h. In vivo studies showed the formulations had optimal area under blood drug concentration curve values in the order of 3% Transcutol P > 1% Transcutol P > 5% Transcutol P > control preparation. The formulation with 3% Transcutol P provided the highest permeation effect both in vitro and in vivo. The safety of this formulation was further evaluated with a skin irritation test. It could effectively improve the rabbit skin irritation observed with a marketed transdermal patch Androderm®. The present study provides a promising approach for the development of a novel TS film forming gel for the treatment of HSDD in women.

Potential of nanoparticulate based delivery systems for effective management of alopecia

In recent times, more than 50 % of the global population is facing hair-related issues (alopecia) which is seen mostly amongst the people in the age group of 30-40 years. The conventional topical dosage forms available in the market falls short in effectively managing alopecia. Despite various advancements in topical dosage forms, it is still disposed to limited clinical application and provides poor penetration of drug molecules into the skin. The exact etiology of alopecia is still unknown and various researchers link lifestyle, hereditary, and auto immune-based events with its existence. Nanoparticulate-based delivery are hence brought in use to enhance the permeability properties of the drug. In comparison to conventional methods nanotechnology-based drug delivery system tames drug molecules to a specific site with much better efficacy. This review is engrossed in the journey and role of nano technological-based drug delivery in the management of alopecia and its clinical application.

Formulation of Topical Dosage Forms Containing Synthetic and Natural Anti-Inflammatory Agents for the Treatment of Rheumatoid Arthritis

Topical anti-inflammatory and analgesic effect for the treatment of rheumatoid arthritis is of major interest because of their fewer side effects compared to oral therapy. The purpose of this study was to prepare different types of topical formulations (ointments and gels) containing synthetic and natural anti-inflammatory agents with different excipients (e.g.,: surfactants, gel-forming) for the treatment of rheumatoid arthritis. The combination of Non-Steroidal Anti-Inflammatory Drugs (NSAIDs), diclofenac sodium, a topical analgesic agent methyl salicylate, and a lyophilized extract of Calendula officinalis with antioxidant effect were used in our formulations. The aim was to select the appropriate excipients and dosage form for the formulation in order to enhance the diffusion of active substances and to certify the antioxidant, analgesic, and anti-inflammatory effects of these formulations. To characterize the physicochemical properties of the formulations, rheological studies, and texture profile analysis were carried out. Membrane diffusion and permeability studies were performed with Franz-diffusion method. The therapeutic properties of the formulations have been proven by an antioxidant assay and a randomized prospective study that was carried out on 115 patients with rheumatoid arthritis. The results showed that the treatment with the gel containing diclofenac sodium, methyl salicylate, and lyophilized Calendula officinalis as active ingredients, 2-propenoic acid homopolymer (Synthalen K) as gel-forming excipient, distilled water, triethanolamine, and glycerol had a beneficial analgesic and local anti-inflammatory effect.

Development and Evaluation of Polymeric Nanosponge Hydrogel for Terbinafine Hydrochloride: Statistical Optimization, In Vitro and In Vivo Studies

Terbinafine hydrochloride, although one of the prominent antifungal agents, suffers from low drug permeation owing to its hydrophobic nature. The approach of nanosponge formulation may thus help to resolve this concern. Thus, the present research was envisioned to fabricate the nanosponge hydrogel of terbinafine hydrochloride for topical delivery since nanosponge augments the skin retentivity of the drug. The optimized formulation was obtained using Box Behnken Design. The dependent and independent process parameters were also determined wherein polyvinyl alcohol (%), ethylcellulose (%), and tween 80 (%) were taken as independent process parameters and particle size, polydispersity index (PDI), and entrapment efficiency (EE) were the dependent parameters. The nanosponge was then incorporated into the hydrogel and characterized. In-vitro drug release from the hydrogel was 90.20 ± 0.1% which was higher than the drug suspension and marketed formulation. In vitro permeation potential of the developed formulation through rat skin showed a flux of 0.594 ± 0.22 µg/cm²/h while the permeability coefficient was 0.059 ± 0.022 cm/s. Nanosponge hydrogel was evaluated for non-irritancy and antifungal activity against C. albicans and T. rubrum confirming the substantial outcome. Tape stripping studies exhibited ten times stripping off the skin quantified 85.6 ± 0.21 μg/cm². The confocal analysis justified the permeation potential of the prepared hydrogel. The mean erythemal score was 0.0, confirming that the prepared hydrogel did not cause erythema or oedema. Therefore, based on results obtained, nanosponge hydrogel formulation is a potential carrier for efficient topical delivery of terbinafine hydrochloride.

Quality-by-Design Approach for the Development of Nano-Sized Tea Tree Oil Formulation-Impregnated Biocompatible Gel with Antimicrobial Properties

Despite the promising properties of tea tree oil (TTO) as potential therapeutics for several superficial skin conditions, certain limitations such as physical instability and skin irritation have restricted its widespread use. This study focuses on developing a rationally designed lipid-based nanoformulation (TTO-LNF) in accordance with the US Food and Drug Administration standard using a well-recognized quality-by-design (QbD) approach. Using a mixture experimental design, TTO-LNF has been optimized with 5% TTO, 10% surfactant, 5% co-surfactant, and 80% water, which showed a 14.4 ± 4.4 nm droplet size and 0.03 ± 0.01 polydispersity index (PDI). To ease the topical administration, the TTO-LNF gel formulation was further developed using xanthan gum to achieve the desired viscosity and form a gel. The in vitro antibacterial tests of TTO-LNF showed promising inhibitory effects toward both Gram-negative and Gram-positive bacteria. In fact, a complete growth inhibition of S. epidermidis was observed when exposed to TTO-LNF and TTO-LNF gel for 24 h, showing better activity than antibiotic kanamycin (25 µg/mL). Additionally, the in vitro release study showed a sustained release profile with a 50% release in 24 h, which could be beneficial to reduce the toxicity and thereby improve the therapeutic efficacy for long-acting applications. Furthermore, the formulations were remarkably stable at 40 °C/75% Relative humidity (RH) for at least 4 weeks. Therefore, this study presents a promising strategy to develop a biocompatible and stable formulation that can be used for the topical treatment of skin infections.

Integrating tacrolimus into eutectic oil-based microemulsion for atopic dermatitis: simultaneously enhancing percutaneous delivery and treatment efficacy with relieving side effects

Background: Topical application of tacrolimus (FK506) was effective in treating atopic dermatitis (AD); however, the therapeutic efficiency is hampered by its poor penetration into the skin and local side effects of transient irritation symptoms with a burning sensation, a feeling of warmth or heat. Menthol and camphor have been widely used in topical compound formulations for adjunctive pharmacotherapy for antipruritics and analgesics owing to their cool nature, and both present skin penetration enhancing effects. Moreover, they can form a liquid eutectic oil to solubilize hydrophobic drugs.

Purpose: Taking advantages of menthol/camphor eutectic (MCE), this work aims to integrate FK506 into MCE to construct a microemulsion system, i.e., FK506 MCE ME, which simultaneously enhances the percutaneous delivery and treatment efficacy, while reduces the side effects of FK506.

Methods: The formulation of FK506 MCE ME was optimized and characterized. Different formulations containing FK506 were topically administered to treat 1–chloro–2, 4–dinitrobenzene (DNCB)-induced murine AD.

Results: MCE solubilized FK506. FK506 in MCE ME penetrated skin in vitro more than in the commercial ointment, and MCE predominantly exerted the enhancing effects in MCE ME. FK506 MCE ME or FK506 MCE ME gel had greater effects on clinical symptoms, histological analysis, and IgE than did commercial FK506. The anti-pruritic and down-regulation of substance P effects of MCE ME vehicle mitigated the side effects of FK506 application.

Conclusion: MCE ME presented the excellent properties of simultaneously enhancing the percutaneous delivery and treatment efficacy, while reducing the side effects of FK506 for AD. Therefore, MCE ME is a promising nanoscale system for FK506 to effectively treating AD with low irritation and high medication adherence.

Chemical compounds studied in this article: Tacrolimus (PubChem CID: 445643); menthol (PubChem CID: 1254); camphor (PubChem CID: 2537)

Thermoreversible mucoadhesive polymer-drug dispersion for sustained local delivery of budesonide to treat inflammatory disorders of the GI tract

Mucoadhesive drug formulations have been studied and used as alternatives to conventional formulations in order to achieve prolonged retention at the intended site. In addition to providing a controlled drug release, several drugs and disease conditions might benefit from mucoadhesive formulations, contributing to better therapeutic outcomes. Here, we describe the development and the in vitro/in vivo characterization of a mucoadhesive in situ gellifying formulation using PF127, a thermo reversible polymer, entrapping budesonide (BUD), a potent corticosteroid used for the treatment of a wide range of inflammatory diseases, including those affecting mucosas, such as in the GI tract. PF127 formulations (15-17%) were successfully prepared by a cold method as a thermo reversible in situ gelling dispersion for mucosal drug delivery, as confirmed by DSC. Sol-gel temperatures of PF127 formulations (25-39 °C) were observed by dynamic gelation and determined by microrheology and oscillatory rheometry. X-ray diffractograms and TEM images showed that BUD was completely solubilized within the polymeric micelles. In vitro, the gels showed 5-14 g force of mucoadhesion, and the ex vivo studies confirmed that the formulation efficiently adhered to the mucosa. Histopathological analysis combined with fluorescence images and ex vivo intestinal permeation confirmed that the formulation remained on the TGI mucosa for at least 4 h after administration. In vivo studies conducted in a murine model of intestinal mucositis demonstrated that the 16% PF127 BUD formulation was able to resolve the inflammatory injury in the intestinal mucosa. Results demonstrate that fine-tuning of PF127 formulations along with adequate selection of the drug agent, thorough characterization of the dispersions and their interactions with biological interfaces leads to the development of effective controlled drug delivery systems targeted to GI inflammatory diseases.

Investigation of Migration-Preventing Tracheal Stent with High Dose of 5-Fluorouracil or Paclitaxel for Local Drug Delivery

Stent migration is one of the common reasons for the failure of tracheal stent. An antitumor drug/tracheal stent combination can promptly relieve dyspnea caused by tracheal stenosis and locally treat malignant occupying lesion or tumor. To prevent stent migration for more effective treatment, we prepared a migration-preventing nitinol tracheal stent (TS) with a high dose of 5-fluorouracil or paclitaxel (5-FU/TS or PTX/TS) by stent surface coating with a bilayered film, which is composed of a drug-loaded layer containing Carbopol 974P as mucoadhesive matrix and a blank Carbopol 974P layer. The resulting stent had a similar mechanical performance with the nitinol tracheal stent itself. The bilayered film containing 30% PTX (PTX30) could keep adhesion to porcine mucosa for 221.7 ± 11.4 min in PBS at a stirring speed of 150 rpm, and the corresponding PTX30/TS was difficult to be moved in the porcine tracheal lumen with a pulling force less than 0.7 N, indicating its good migration-preventing ability. The migration-preventing ability of the 5-FU/TS or PTX/TS was related to the compositions of bilayered films. The 5-FU release from the 5-FU/TS was dominated by a relaxation mechanism, while the PTX release was mainly controlled by a diffusion mechanism. Moreover, the 5-FU permeation from the 5-FU loaded film through the porcine tracheal mucosa was determined by the 5-FU dissolution, and PTX permeation was limited by the trans-mucosa process. After the deployment of PTX30/TS, inflammatory responses were observed in the rabbit tracheas and gradually alleviated during the follow-up period.

Microemulsion-based hydrogels for enhancing epidermal/dermal deposition of topically administered 20(S)-protopanaxadiol: in vitro and in vivo evaluation studies

BACKGROUND

20(S)-Protopanaxadiol (20S-PPD) is a fully deglycosylated ginsenoside metabolite and has potent dermal antiaging activity. However, because of its low aqueous solubility and large molecular size, a suitable formulation strategy is required to improve its solubility and skin permeability, thereby enhancing its skin deposition. Thus, we optimized microemulsion (ME)-based hydrogel (MEH) formulations for the topical delivery of 20S-PPD.

METHODS

MEs and MEHs were formulated and evaluated for their particle size distribution, morphology, drug loading capacity, and stability. Then, the deposition profiles of the selected 20S-PPD-loaded MEH formulation were studied using a hairless mouse skin model and Strat-M membrane as an artificial skin model.

RESULTS

A Carbopol-based MEH system of 20S-PPD was successfully prepared with a mean droplet size of 110 nm and narrow size distribution. The formulation was stable for 56 d, and its viscosity was high enough for its topical application. It significantly enhanced the in vitro and in vivo skin deposition of 20S-PPD with no influence on its systemic absorption in hairless mice. Notably, it was found that the Strat-M membrane provided skin deposition data well correlated to those obtained from the in vitro and in vivo mouse skin studies on 20S-PPD (correlation coefficient r 2 = 0.929‒0.947).

CONCLUSION

The MEH formulation developed in this study could serve as an effective topical delivery system for poorly soluble ginsenosides and their deglycosylated metabolites, including 20S-PPD.

Higher Biostability of rh-aFGF-Carbomer 940 Hydrogel and Its Effect on Wound Healing in a Diabetic Rat Model

Hydrogels are excellent drug delivery carriers with excellent ductility. Here, we report the design of a higher biostability of a recombinant human acidic fibroblast growth factor (rh-aFGF) carbomer hydrogel formulation. To verify the optimality of this formula, we prepared various prescriptions and tested the resulting physical properties including micromorphology, long-term stability, accelerated stability, and destructive test. Furthermore, the efficacy for promoting wound healing in full-thickness injury and scald wound diabetic rat models was explored. We found that rh-aFGF-carbomer hydrogel had good physical properties. It was stable for 24 months at 5 ± 3 °C, and for 6 months at 25 ± 3 °C. In vivo, the rh-aFGF-carbomer 940 hydrogel achieved a remarkable promotion of skin wound healing in diabetic rats with full-thickness injuries or scald wounds. Our data suggest that rh-aFGF-carbomer hydrogel may have applications for the treatment of diabetic ulcers combined with other wounds.

Tacrolimus nanoparticles based on chitosan combined with nicotinamide: enhancing percutaneous delivery and treatment efficacy for atopic dermatitis and reducing dose

Background

Topical application of tacrolimus (FK506) was effective in the treatment of atopic dermatitis (AD); however, adverse effects frequently occurred with the increase of FK506 dose during long–term treatment.

Objective

The objective of this project was to develop a hybrid skin targeting system encapsulating FK506 based on nicotinamide (NIC) and chitosan nanoparticles (CS–NPs), ie, FK506–NIC–CS–NPs, which took advantages of both of NIC and CS–NPs to obtain the synergetic effects of percutaneous delivery and treatment efficacy enhancement along with dose reduction.

Methods

The formulation of FK506–NIC–CS–NPs was optimized and characterized. In vitro and in vivo skin permeation studies were performed. AD–like skin lesions were constructed with BALB/c mice by 1–chloro–2, 4–dinitrobenzene (DNCB)–induced, and FK506–NIC–CS–NPs containing different dose of FK506 were topically administered to treat AD–like skin lesions in comparison with Protopic.

Results

NIC was found to significantly increase the FK506 EE to 92.2% by CS–NPs. In comparison with commercial FK506 ointment (Protopic), in vitro and in vivo skin permeation studies demonstrated that NIC–CS–NPs system significantly enhanced FK506 permeation through and into the skin, and deposited more FK506 into the skin. The treatment efficacy on clinical symptoms, histological analysis, and molecular biology of the AD–mice demonstrated that NIC–CS–NPs with ~1/3 dose of FK506 of Protopic was superior to that of Protopic, and NIC–CS–NPs vehicle exhibited the adjuvant therapy and moderate anti–AD effects.

Conclusion

The system of NIC–CS–NPs enhances the permeability of FK506, plays an adjuvant role in anti-AD, reduces the dose of FK506 in treating AD, and is therefore a promising nanoscale system of FK506 for the effective treatment of AD.

Novel microemulsion-based gels for topical delivery of indomethacin: Formulation, physicochemical properties and in vitro drug release studies

HYPOTHESIS

Microemulsion-based semisolid systems may be considered as an interesting alternative to the traditional dosage forms applied in topical drug delivery. Mechanical properties of topical products are important both in terms of application and dosage form effectiveness. In this study we designed and evaluated novel microemulsion-based gels with indomethacin and analyzed the factors affecting their mechanical characteristics and drug release.

EXPERIMENTS

The impact of the microemulsion composition on the extent of isotropic region was investigated with the use of pseudoternary phase diagrams. Selected microemulsions were analyzed in terms of electrical conductivity and surface tension in order to determine the microemulsion type. Microemulsions were transformed into polymer-based gels and subjected to rheological and textural studies. Finally, the indomethacin release from the analyzed gels was studied and compared to commercially available product.

FINDINGS

The extent of isotropic domain in pseudoternary phase diagrams seems to be dependent on the polarity of the oil phase. The surface tension and conductivity monitored as a function of water content in microemulsion systems revealed possible structural transformations from w/o through bicontinuous systems into o/w. The mechanical properties of semisolid microemulsion-based systems depended on the composition of surface active agents and the drug presence. The drug release profiles observed in the case of the investigated gels differed from those recorded for the commercially available product which was most probably caused by the different structure of both systems.

Local Application of Statins Significantly Reduced Hypertrophic Scarring in a Rabbit Ear Model

BACKGROUND

We previously showed that intradermal injection of statins is a successful treatment for hypertrophic scarring. Topical application has many advantages over intradermal injection. In this study, we demonstrate the efficacy of topical statin treatment in reducing scar in our validated rabbit ear scar model.

METHODS

Twenty New Zealand White rabbits were divided into 2 study groups, with 6 rabbits receiving 10 μm pravastatin intradermally at postoperative days 15, 18, and 21, and 14 rabbits receiving 0.4%, 2%, and 10% simvastatin topical application at postoperative days 14-25. Four or 6 full-thickness circular dermal punches 7 mm in diameter were made on the ventral surface of the ear down to but not including the perichondrium. Specimens were collected at 28 days to evaluate the effects of statins on hypertrophic scarring.

RESULTS

Treatment with pravastatin intradermal administration significantly reduced scarring in terms of scar elevation index. Topical treatment with both medium- and high-dose simvastatin also significantly reduced scarring. High-dose simvastatin topical treatment showed a major effect in scar reduction but induced side effects of scaling, erythema, and epidermal hyperplasia, which were improved with coapplication of cholesterol. There is a dose response in scar reduction with low-, medium- and high-dose simvastatin topical treatment. High-dose simvastatin treatment significantly reduced the messenger ribonucleic acid (mRNA) expression of connective tissue growth factor, consistent with our previously published work on intradermally injected statins. More directly, high-dose simvastatin treatment also significantly reduced the mRNA expression of collagen 1A1.

CONCLUSIONS

Topical simvastatin significantly reduces scar formation. The mechanism of efficacy for statin treatment through interference with connective tissue growth factor mRNA expression was confirmed.