Enhanced Dissolution of Ursodeoxycholic Acid from the Solid Dispersion

Polyglycerol fatty acid ester contributes to the improvement and maintenance of water solubility of amorphous curcumin by suppressing the intermolecular interaction and the diffusion rate of curcumin

Curcumin (CUR), a polyphenol, is an attractive component of functional foods, owing to various physiological activities. However, CUR is highly hydrophobic, insoluble in water, and difficult to absorb in the body. Here, we report an amorphous CUR formulation containing the dispersant polyglycerol fatty acid ester (PGFE), demonstrating high and stable water solubility. Improved water solubility enhanced the absorbability of CUR in our amorphous formulation along with enhanced triglyceride inhibition, compared to that in a commercial formulation. Nuclear Overhauser effect spectroscopy (NOESY) analysis revealed that PGFE reduced CUR-CUR interaction, resulting in higher dispersion and improved solubility of CUR. Taylor dispersion analysis showed a lower diffusion coefficient of CUR in the highly water-soluble formulation (with PGFE) than that in the low water-soluble formulation (without PGFE), which prevents recontact and recrystallization of CUR, which is trapped by PGFE. Overall, the amorphous CUR with high solubility could be used as a promising functional food.

Preparation and characterization of sorafenib-loaded microprecipitated bulk powder for enhancing oral bioavailability

The aim of this study was to prepare and evaluate Eudragit-based microprecipitated bulk powder (MBP) formulations to enhance the oral bioavailability of sorafenib. Cationic Eudragit E PO and anionic Eudragit S100 were selected for MBP preparation. Ursodeoxycholic acid (UDCA)-incorporated MBP was also prepared to study the synergistic effect of UDCA in enhancing the bioavailability of sorafenib. Sorafenib-loaded MBPs were successfully prepared by a pH-controlled precipitation method using an aqueous antisolvent. Submicron-sized particles of MBPs were observed by scanning electron microscopy, and the amorphous form of sorafenib in MBPs was confirmed by powder X-ray diffraction. MBPs of cationic and anionic Eudragits showed different in vitro dissolution and pharmacokinetic profiles in rats. Sorafenib in Eudragit E PO-based MBP (E PO-MBP) was rapidly dissolved at low pH conditions (pH 1.2 and 4.0), but was precipitated again at pH 4.0 within 4 h. Dissolution of sorafenib from Eudragit S100-based MBP (S100-MBP) was high at pH 7.4 and did not precipitate for up to 4 h. After oral administration to rats, all MBPs, compared with powder, improved the oral absorption of sorafenib, with S100-MBP showing 1.5-fold higher relative oral bioavailability than E PO-MBP. Moreover, incorporation of UDCA in S100-MBP (S100-UDCA-MBP) further increased the C_max and oral bioavailability of sorafenib, although the dissolution was not significantly different from that of S100-MBP. Taken together, Eudragit-based MBP formulations could be a promising strategy for enhancing the oral bioavailability of sorafenib.

Preparation and evaluation of azithromycin binary solid dispersions using various polyethylene glycols for the improvement of the drug solubility and dissolution rate

ABSTRACT Azithromycin is a water-insoluble drug, with a very low bioavailability. In order to increase the solubility and dissolution rate, and consequently increase the bioavailability of poorly-soluble drugs (such as azithromycin), various techniques can be applied. One of such techniques is "solid dispersion". This technique is frequently used to improve the dissolution rate of poorly water-soluble compounds. Owing to its low solubility and dissolution rate, azithromycin does not have a suitable bioavailability. Therefore, the main purpose of this investigation was to increase the solubility and dissolution rate of azithromycin by preparing its solid dispersion, using different Polyethylene glycols (PEG). Preparations of solid dispersions and physical mixtures of azithromycin were made using PEG 4000, 6000, 8000, 12000 and 20000 in various ratios, based on the solvent evaporation method. From the studied drug release profile, it was discovered that the dissolution rate of the physical mixture, as the well as the solid dispersions, were higher than those of the drug alone. There was no chemical incompatibility between the drug and polymer from the observed Infrared (IR) spectra. Drug-polymer interactions were also investigated using Differential Scanning Calorimetry (DSC), Powder X-Ray Diffraction (PXRD) and Scanning Election Microscopy (SEM). In conclusion, the dissolution rate and solubility of azithromycin were found to improve significantly, using hydrophilic carriers, especially PEG 6000.

Preparation of naproxen-ethyl cellulose microparticles by spray-drying technique and their application to textile materials

The objective of this study is to develop a new textile-based drug delivery system containing naproxen (NAP) microparticles and to evaluate the potential of the system as the carrier of NAP for topical delivery. Microparticles were prepared by spray-drying using an aqueous ethyl cellulose dispersion. The drug content and entrapment efficiency, particle size and distribution, particle morphology and in vitro drug release characteristics of microparticles were optimized for the application of microparticles onto the textile fabrics. Microparticles had spherical shape in the range of 10-15 μm and a narrow particle size distribution. NAP encapsulated in microparticles was in the amorphous or partially crystalline nature. Microparticles were tightly fixed onto the textile fabrics. In vitro drug release exhibited biphasic release profile with an initial burst followed by a very slow release. Skin permeation profiles were observed to follow near zero-order release kinetics.

Characteristics of Rofecoxib-Polyethylene Glycol 4000 Solid Dispersions and Tablets Based on Solid Dispersions

The aim of this work was to report the properties of rofecoxib-PEG 4000 solid dispersions and tablets prepared using rofecoxib solid dispersions. Rofecoxib is a poorly water soluble nonsteroidal anti-inflammatory drug with a poor dissolution profile. This work investigated the possibility of developing rofecoxib tablets, allowing fast, reproducible, and complete rofecoxib dissolution, by using rofecoxib solid dispersion in polyethylene glycol (PEG) 4000. Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the solid state of solid dispersions. The effect of PEG 4000 concentration on the dissolution rate of rofecoxib from its solid dispersions was investigated. The dissolution rate of rofecoxib from its solid dispersions increased with an increasing amount of PEG 4000. The extent of dissolution rate enhancement was estimated by calculating the mean dissolution time (MDT) values. The MDT of rofecoxib decreased significantly after preparing its solid dispersions with PEG 4000. The FTIR spectroscopic studies showed the stability of rofecoxib and absence of well-defined rofecoxib-PEG 4000 interaction. The DSC and XRD studies indicated the amorphous state of rofecoxib in solid dispersions of rofecoxib with PEG 4000. SEM pictures showed the formation of effective solid dispersions of rofecoxib with PEG 4000 since well-defined change in the surface nature of rofecoxib and solid dispersions were observed. Solid dispersions formulation with highest drug dissolution rate (rofecoxib: PEG 4000 1:10 ratio) was used for the preparation of solid dispersion-based rofecoxib tablets by the direct compression method. Solid dispersion-based rofecoxib tablets obtained by direct compression, with a hardness of 8.1 Kp exhibited rapid drug dissolution and produced quick anti-inflammatory activity when compared to conventional tablets containing pure rofecoxib at the same drug dosage. This indicated that the improved dissolution rate and quick anti-inflammatory activity of rofecoxib can be obtained from its solid dispersion-based oral tablets.

Enhancement of Dissolution Rate of Valdecoxib Using Solid Dispersions with Polyethylene Glycol 4000

The aim of the present study was to enhance the dissolution rate of valdecoxib using its solid dispersions (SDs) with polyethylene glycol (PEG) 4000. The phase solubility behavior of valdecoxib in the presence of various concentrations of PEG 4000 in water was obtained at 37 degrees C. The solubility of valdecoxib increased with increasing amount of PEG 4000 in water. Gibbs free energy (deltaG(zero)tr) values were all negative, indicating the spontaneous nature of valdecoxib solubilization, and they decreased with increase in the PEG 4000 concentration, demonstrating that the reaction conditions became more favorable as the concentration of PEG 4000 increased. The SDs of valdecoxib with PEG 4000 were prepared at 1:1, 1:2, 1:5, and 1:10 (valdecoxib: PEG 4000) ratio by melting method. Evaluation of the properties of the SDs was performed by using dissolution, Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), X-ray diffraction (XRD), and scanning electron microscopy (SEM) studies. The SDs of valdecoxib with PEG 4000 exhibited enhanced dissolution rate of valdecoxib, and the rate increased with increasing concentration of PEG 4000 in SDs. Mean dissolution time (MDT) of valdecoxib decreased significantly after preparation of SDs and physical mixture with PEG 4000. The FTIR spectroscopic studies showed the stability of valdecoxib and absence of well-defined valdecoxib-PEG 4000 interaction. The DSC and XRD studies indicated the amorphous state of valdecoxib in SDs of valdecoxib with PEG 4000. The SEM pictures showed the formation of effective SDs of valdecoxib with PEG 4000, since well-defined changes in the surface nature of valdecoxib, SDs, and physical mixture were observed.

Enhancement of dissolution rate of gliclazide using solid dispersions with polyethylene glycol 6000

The aim of the present study was to enhance the dissolution rate of gliclazide using its solid dispersions (SDs) with polyethylene glycol (PEG) 6000. The phase solubility behavior of gliclazide in presence of various concentrations of PEG 6000 in 0.1 N HCl was obtained at 37 degrees C. The solubility of gliclazide increased with increasing amount of PEG 6000 in water. Gibbs free energy (deltaG(o)(tr)) values were all negative, indicating the spontaneous nature of gliclazide solubilization and they decreased with increase in the PEG 6000 concentration, demonstrating that the reaction conditions became more favorable as the concentration of PEG 6000 increased. The SDs of gliclazide with PEG 6000 were prepared at 1:1, 1:2 and 1:5 (gliclazide/PEG 6000) ratio by melting-solvent method and solvent evaporation method. Evaluation of the properties of the SDs was performed by using dissolution, Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) and X-ray diffraction (XRD) studies. The SDs of gliclazide with PEG 6000 exhibited enhanced dissolution rate of gliclazide, and the rate increased with increasing concentration of PEG 6000 in SDs. Mean dissolution time (MDT)of gliclazide decreased significantly after preparation of SDs and physical mixture with PEG 6000. The FTIR spectroscopic studies showed the stability of gliclazide and absence of well-defined gliclazide-PEG 6000 interaction. The DSC and XRD studies indicated the microcrystalline or amorphous state of gliclazide in SDs of gliclazide with PEG 6000.

Enhancement of dissolution profile by solid dispersion (kneading) technique

This article investigates enhancement of the dissolution profile of valdecoxib using solid dispersion with PVP. The article also describes the preparation of fast-dissolving tablets of valdecoxib by using a high amount of superdisintegrants. A phase solubility method was used to evaluate the effect of various water-soluble polymers on aqueous solubility of valdecoxib. Polyvinyl pyrrolidone (PVP K-30) was selected and solid dispersions were prepared by the method of kneading. Dissolution studies using the USP paddle method were performed for solid dispersions of valdecoxib. Infrared (IR) spectroscopy, differential scanning calorimetry (DSC), and x-ray diffractometry (XRD) were performed to identify the physicochemical interaction between drug and carrier, hence its effect on dissolution. Tablets were formulated containing solid dispersion products and compared with commercial products. IR spectroscopy, XRD, and DSC showed no change in the crystal structure of valdecoxib. Dissolution of valdecoxib improved significantly in solid dispersion products (< 85% in 5 minutes). Tablets containing solid dispersion exhibited better dissolution profile than commercial tablets. Thus, the solid dispersion technique can be successfully used for improvement of dissolution of valdecoxib.

Factors affecting the apparent solubility of ursodeoxycholic acid in the grinding process

Ursodeoxycholic acid (UDCA) was ground by a vibrating mill. Apparent solubility of the ground sample was determined by Coulter counter method. The samples were characterized by pore size distribution measurement, powder X-ray diffraction (PXRD) measurement, near infra-red (NIR) spectroscopy and contact angle measurement. The dispersive and polar components of surface free energy were calculated from the contact angle data determined by a contact angle analyzer. Surface polarity was calculated from the surface free energy components. The apparent solubility of UDCA was increased by the grinding with vibrating mill, however, the particle size of ground sample was not decreased. An amorphization was observed in the PXRD pattern of the ground sample, and the crystallinity of sample was decreased with increasing the grinding time. During the initial grinding, the dispersive component of surface free energy was decreased, whereas the polar part of surface free energy was increased. The surface polarity of the sample was increased in the same manner. Relationship between the solubility and the factors changing in the grinding process was evaluated. There was a significant correlation between the apparent solubility and the surface polarity and crystallinity of the sample. The NIR spectra confirmed the appearance of [bond]OH group on the sample surface. The apparent solubility increase of the ground sample was closely related to the improvement of the surface polarity and the destruction of crystalline structure.

Thermal behavior of ursodeoxycholic acid in urea: identification of anomalous peak in the thermal analysis

The objective of this study was to clarify the thermal behavior of ursodeoxycholic acid (UDCA) in mixtures with urea. Physical mixtures of UDCA and urea in various ratios were prepared, and the thermal analysis of these sample mixtures was investigated using conventional differential scanning calorimetry (DSC) and variable-temperature powder X-ray diffractometry (VTXRD). The hot-stage microscopy (HSM) and powder X-ray diffractometry (PXRD) were used as complementary techniques. From the DSC results of all sample mixtures, it was found that there was no endothermic peak at the melting temperature of intact UDCA crystals. The DSC thermograms of each ratio showed only the endothermic peak at about 136 degrees C due to the melt of urea and the anomalous endothermic peak at about 155 degrees C 157 degrees C. The VTXRD study revealed that the crystals of urea completely disappeared at a temperature of 140 degrees C. At this temperature, it was identified that the VTXRD pattern obtained was of UDCA crystals. The crystalline peaks gradually decreased in intensity at a temperature of 150 degrees C When the temperature was up to 160 degrees C, the identical crystalline peaks of UDCA crystals completely disappeared. It was concluded that the anomalous endothermic peak at 155 degrees C-157 degrees C was the peak due to the dissolution of UDCA crystals in the surrounding melted urea.

Physicochemical properties of amorphous clarithromycin obtained by grinding and spray drying

In order to characterize the amorphous clarithromycin (CAM) obtained by grinding and spray drying, physicochemical properties (crystallinity, thermal behavior, stability and solubility parameters) were evaluated. From powder X-ray diffraction, it was estimated that the crystalline state of CAM was changed into an amorphous state by grinding and spray drying. In differential scanning calorimetry measurements, both broad and sharp peaks for crystallization were observed in ground samples, whereas spray dried samples showed one broad peak due to crystallization. As to the stability test under high humidity, structural difference was confirmed between ground CAMs and spray dried CAM. The heat of dissolution of ground CAMs was greater than that of intact CAM. In the solubility parameter measurement, the increase of the special term, deltas, indicated that the energy change was due to the polarity of the surface energy of the powder particles by grinding.