Preparation, optimization, and evaluation of Zaltoprofen-loaded microemulsion and microemulsion-based gel for transdermal delivery

Quality-by-design-based microemulsion of disulfiram for repurposing in melanoma and breast cancer therapy

Aim: The current study aims to develop and optimize microemulsions (ME) through Quality-by-Design (QbD) approach to improve the aqueous solubility and dissolution of poorly water-soluble drug disulfiram (DSF) for repurposing in melanoma and breast cancer therapy. Materials & methods: The ME was formulated using Cinnamon oil & Tween® 80, statistically optimized using a D-optimal mixture design-based QbD approach to develop the best ME with low vesicular size (Zavg) and polydispersity index (PDI). Results: The DSF-loaded optimized stable ME showed enhanced dissolution, in-vitro cytotoxicity and improved cellular uptake in B16F10 and MCF-7 cell lines compared with their unformulated free DSF. Conclusion: Our investigations suggested the potential of the statistically designed DSF-loaded optimized ME for repurposing melanoma and breast cancer therapy.

Preparing a novel baicalin-loaded microemulsion-based gel for transdermal delivery and testing its anti-gout effect

We previously demonstrated that baicalin had efficacy against gouty arthritis (GA) by oral administration. In this paper, a novel baicalin-loaded microemulsion-based gel (B-MEG) was prepared and assessed for the transdermal delivery of baicalin against GA. The preparation method and transdermal capability of B-MEG was screened and optimized using the central composite design, Franz diffusion cell experiments, and the split-split plot design. Skin irritation tests were performed in guinea pigs. The anti-gout effects were evaluated using mice. The optimized B-MEG comprised of 50 % pH 7.4 phosphate buffered saline, 4.48 % ethyl oleate, 31.64 % tween 80, 13.88 % glycerin, 2 % borneol, 0.5 % clove oil and 0.5 % xanthan gum, with a baicalin content of (10.42 ± 0.08) mg/g and particle size of (15.71 ± 0.41) nm. After 12 h, the cumulative amount of baicalin permeated from B-MEG was (672.14 ± 44.11) μg·cm-2. No significant skin irritation was observed following B-MEG application. Compared to the model group, B-MEG groups significantly decreased the rate of auricular swelling (P < 0.01) and number of twists observed in mice (P < 0.01); and also reduced the rate of paw swelling (P < 0.01) and inflammatory cell infiltration in a mouse model of GA. In conclusion, B-MEG represents a promising transdermal carrier for baicalin delivery and can be used as a potential therapy for GA.

Design of High-Payload Ascorbyl Palmitate Nanosuspensions for Enhanced Skin Delivery

A high-payload ascorbyl palmitate (AP) nanosuspension (NS) was designed to improve skin delivery following topical application. The AP-loaded NS systems were prepared using the bead-milling technique, and softly thickened into NS-loaded gel (NS-G) using hydrophilic polymers. The optimized NS-G system consisted of up to 75 mg/mL of AP, 0.5% w/v of polyoxyl-40 hydrogenated castor oil (Kolliphor® RH40) as the suspending agent, and 1.0% w/v of sodium carboxymethyl cellulose (Na.CMC 700 K) as the thickening agent, in citrate buffer (pH 4.5). The NS-G system was embodied as follows: long and flaky nanocrystals, 493.2 nm in size, -48.7 mV in zeta potential, and 2.3 cP of viscosity with a shear rate of 100 s-1. Both NS and NS-G provided rapid dissolution of the poorly water-soluble antioxidant, which was comparable to that of the microemulsion gel (ME-G) containing AP in solubilized form. In an ex vivo skin absorption study using the Franz diffusion cell mounted on porcine skin, NS-G exhibited faster absorption in skin, providing approximately 4, 3, and 1.4 times larger accumulation than that of ME-G at 3, 6, and 12 h, respectively. Therefore, the high-payload NS makes it a promising platform for skin delivery of the lipid derivative of ascorbic acid.

Microemulsion-Based Keratin-Chitosan Gel for Improvement of Skin Permeation/Retention and Activity of Curcumin

Curcumin (Cur) is a kind of polyphenol with a variety of topical pharmacological properties including antioxidant, analgesic and anti-inflammatory activities. However, its low water solubility and poor skin bioavailability limit its effectiveness. In the current study, we aimed to develop microemulsion-based keratin-chitosan gel for the improvement of the topical activity of Cur. The curcumin-loaded microemulsion (CME) was formulated and then loaded into the keratin-chitosan (KCS) gel to form the CME-KCS gel. The formulated CME-KCS gel was evaluated for its characterization, in vitro release, in vitro skin permeation and in vivo activity. The results showed that the developed CME-KCS gel had an orange-yellow and gel-like appearance. The particle size and zeta potential of the CME-KCS gel were 186.45 ± 0.75 nm and 9.42 ± 0.86 mV, respectively. The CME-KCS gel showed desirable viscoelasticity, spreadability, bioadhesion and controlled drug release, which was suitable for topical application. The in vitro skin permeation and retention study showed that the CME-KCS gel had better in vitro skin penetration than the Cur solution and achieved maximum skin drug retention (3.75 ± 0.24 μg/cm²). In vivo experimental results confirmed that the CME-KCS gel was more effective than curcumin-loaded microemulsion (Cur-ME) in analgesic and anti-inflammatory activities. In addition, the CME-KCS gel did not cause any erythema or edema based on a mice skin irritation test. These findings indicated that the developed CME-KCS gel could improve the skin penetration and retention of Cur and could become a promising formulation for topical delivery to treat local diseases.

Population Pharmacokinetic Modeling of Zaltoprofen in Healthy Adults: Exploring the Dosage Regimen

Zaltoprofen is a drug used for various pain and inflammatory diseases. Scientific and quantitative dosage regimen studies regarding its clinical application are scarce. This study aimed to discover effective covariates related to interindividual pharmacokinetic variability through population pharmacokinetic modeling for zaltoprofen and to explore dosage regimens. The bioequivalence results of healthy Korean males, biochemical analysis, and CYP2C9 genotyping information were utilized in modeling. The established model has been sufficiently verified through a bootstrap, goodness-of-fit, visual predictive check, and normalized prediction distribution error. External data sets derived from the literature were used for further model validation. The final model could be used to verify the dosage regimen through multiple exposure simulations according to the numerical change of the selected covariates. Zaltoprofen pharmacokinetics could be explained by a two-compartment with a first-order absorption model. Creatinine clearance (CrCL) and albumin were identified as effective covariates related to interindividual zaltoprofen pharmacokinetic variability, and they had positive and negative correlations with clearance (CL/F), respectively. The differences in pharmacokinetics between individuals according to CYP2C9 genetic polymorphisms (*1/*1 and *1/*3) were not significant or valid covariates. The model simulation confirmed that zaltoprofen pharmacokinetics could significantly differ as the CrCL and albumin levels changed within the normal range. Steady-state plasma exposure to zaltoprofen was significantly reduced in the group with CrCL and albumin levels of 130 mL/min and 3.5 g/dL, respectively, suggesting that dose adjustment may be necessary. This study is useful to guide precision medicine of zaltoprofen and provides scientific quantitative judgment data for its clinical applications.

Preparation and Characterization of Lidocaine-Loaded, Microemulsion-Based Topical Gels

Microemulsion-based gels (MBGs) were prepared for transdermal delivery of lidocaine and evaluated for their potential for local anesthesia. Lidocaine solubility was measured in various oils, and phase diagrams were constructed to map the concentration range of oil, surfactant, cosurfactant, and water for oil-in-water (o/w) microemulsion (ME) domains, employing the water titration method at different surfactant/cosurfactant weight ratios. Refractive index, electrical conductivity, droplet size, zeta potential, pH, viscosity, and stability of fluid o/w MEs were evaluated. Carbomer^® 940 was incorporated into the fluid drug-loaded MEs as a gelling agent. Microemulsion-based gels were characterized for spreadability, pH, viscosity, and in-vitro drug release measurements, and based on the results obtained, the best MBGs were selected and subsequently subjected to ex-vivo rat skin permeation anesthetic effect and irritation studies. Data indicated the formation of nano-sized droplets of MEs ranging from 20 - 52 nm with a polydispersity of less than 0.5. In-vitro release and ex-vivo permeation studies on MBGs showed significantly higher drug release and permeation in comparison to the marketed topical gel. Developed MBG formulations demonstrated greater potential for transdermal delivery of lidocaine and advantage over the commercially available gel product, and therefore, they may be considered as potential vehicles for the topical delivery of lidocaine.

Liposome and microemulsion loaded with ibuprofen: from preparation to mechanism of drug transport

To compare the difference between liposome (LP) and microemulsion (ME) in delivering ibuprofen (IBU) transdermally and explore relative mechanism. IBU-LP and IBU-ME were prepared by ethanol injection and spontaneous emulsification, respectively. The percutaneous delivery was evaluated using Franz diffusion cells. Fourier transform infra-red spectroscopy (FTIR), differential scanning calorimetry (DSC), activation energy (Ea), and confocal laser scanning microscopy (CLSM) were used to investigate the transdermal mechanism. The particle size and encapsulation efficiency were 228.00 ± 8.60 nm, 86.68 ± 1.43%(w/w) for IBU-LP, and 56.74 ± 7.11 nm, 91.08 ± 3.27%(w/w) for IBU-ME. Percutaneous study showed that formulations enhanced permeation and drug retention in the skin. FTIR and DSC showed that the permeation occurred due to the interaction of the formulations with the lipid bilayer and the protein. The decrease in Ea (1.506 and 0.939 kcal/mol) revealed that the stratum corneum (SC) lipid bilayers were significantly disrupted and this destructive effect of IBU-LP was stronger. IBU-LP was superior to IBU-ME in the aspects of transdermal delivery of IBU.

Topical non-aqueous nanoemulsion of Alpinia galanga extract for effective treatment in psoriasis: in vitro and in vivo evaluation

Non-aqueous nanoemulsion (NANE) of Alpinia galanga extract (AGE) was prepared using Palmester 3595 (MCT oil) as oil phase, Cremophor RH 40-Transcutol P® as surfactant-co-surfactant (S_mix), and glycerin as non-aqueous polar continuous phase. The composition was optimized by applying three-level, four factor Box-Behnken design (BBD). The mean droplet size and zeta potential of the optimized AGE NANE was found to be 60.81 ± 18.88 nm and -7.99 ± 4.14 mV, respectively. The ex vivo permeation studies of AGE NANE and AGE per se on porcine skin reported flux of 125.58 ± 8.36 µg/cm² h^-1 and 12.02 ± 1.64 µg/cm²h^-1, respectively. Therefore, the enhancement ratio has shown 10-folds increase in the flux for AGE NANE when compared to extract per se. Later, confocal laser scanning microcopy confirmed that AGE NANE were able to penetrate into skin's stratum by trans-follicular transport mechanism. The stability studies of AGE NANE confirmed its stability at 30 ± 2℃ /75 ± 5 % RH and 5 ± 3℃. The efficacy of AGE NANE was evaluated in vivo on imiquimod (IMQ) induced mouse model. The mice treated with low and high doses of AGE NANE (groups VI and VII) showed significant (p<0.05) amelioration of psoriasis. Results of histopathology indicated reduction in psoriasis area severity index in AGE NANE treated mice (group VI and group VII).

Hyaluronan-modified transfersomes based hydrogel for enhanced transdermal delivery of indomethacin

Hyaluronic acid (HA), as a hygroscopic and biocompatible molecule, has displayed unique permeation enhancement in transdermal delivery systems. Hence, indomethacin (IND) was encapsulated in HA-modified transfersomes (IND-HTs) to enhance transdermal IND delivery to reduce adverse effects in this study. The physiochemical properties of IND-HTs were characterized. Results showed that the prepared IND-HTs were spherical and revealed good entrapment efficiency (87.88 ± 2.03%), with a nanometric particle size (221.8 ± 93.34 nm). Then, IND-HTs were further incorporated into a carbopol 940 hydrogel (IND-HTs/Gel) to prolong retention capacity on the skin. The in vitro release and skin permeation experiments of IND-HTs/Gel were carried out with the Franz diffusion cells. It was found that IND-HTs/Gel exhibited sustained drug release, as well as superior drug permeation and flux across the skin. Confocal laser scanning microscopy showed improved penetration of HTs/Gel with a wider distribution and higher fluorescence intensity. The hematoxylin–eosin stained showed that HA improved the transdermal effect by changing the microstructure of skin layers and decreasing skin barrier function. In addition, IND-HTs/Gel showed significant analgesic activity in hot plate test and no potentially hazardous skin irritation. This study indicated that the developed IND-HTs/Gel could be a promising alternative to conventional oral delivery of IND by topical administration.

Permeation, stability and acute dermal irritation of miroestrol and deoxymiroestrol from Pueraria candollei var. mirifica crude extract loaded transdermal gels

In this study, permeation behaviors and chemical stability of miroestrol and deoxymiroestrol from Pueraria candollei var. mirifica (PM), Thai traditional medicine, crude extract containing transdermal gels were firstly evaluated. Three different PM extract containing gels were formulated, including hydroalcoholic and microemulsion gels using carbomer, and silicone gel using silicone elastomer. In vitro permeation through porcine ear skin demonstrated that the flux and 24 h cumulative permeation of miroestrol and deoxymiroestrol were in the order of hydroalcoholic > silicone > microemulsion gels. Hydroalcoholic gel provided the highest partition coefficient from gel onto skin, and thus the skin permeability coefficient. After 24 h permeation, no miroestrol and deoxymiroestrol remained deposited in the skin. Accelerated study using heating-cooling revealed insignificant difference between the remaining percentages of miroestrol and deoxymiroestrol in aqueous and non-aqueous based gels. Long-term stability study showed that miroestrol contents remained constant for 90 d and 30 d under 5 ± 3 °C and 30 ± 2 °C, 75 ± 5%RH, respectively; whereas the percentage of deoxymiroestrol decreased significantly after 30 d storage, irrespective of storage conditions. Acute dermal irritation test on New Zealand White rabbits showed that PM hydroalcoholic gels were non-irritant, with no signs of erythema or oedema.[Figure: see text].

Preparation and quality evaluation of a volatile oil microemulsion from Flos magnoliae and Centipeda minima

In order to improve the water solubility of the volatile oils extracted from Flos magnoliae (FM) and Centipeda minima (CM), they were prepared as a microemulsion (ME), which were then used in the development of an FM and CM volatile oil ME for the treatment of allergic rhinitis (AR). ME was prepared by phase inversion emulsification, and the prescription factors such as emulsifier, co‑emulsifier, oil phase, Km, which represents the ratio of the mass of emulsifier to that of the co‑emulsifier, and preparation factors such as temperature affecting the formation of the ME were selected according to the formation area of ME in a pseudo‑ternary phase diagram. The quality of the ME was evaluated based on its appearance, particle size, Zeta potential and stability. The content of eucalyptol in ME was determined by gas chromatography‑mass spectrometry (GC‑MS). The cumulative permeability of the ME within 24 h was measured with a transdermal diffusion tester. The results revealed that the best formula for preparation of the ME was as follows: Castor oil polyoxyethylene ether (EL‑40) was the emulsifier; the co‑emulsifier was anhydrous ethanol; the Km was 2:1; the mixed phase of volatile oil and isopropyl myristate with mass ratio of 1:1 was used as oil phase; and the preparation temperature was 25˚C. The content of eucalyptol in the ME was 2.57 mg/g, and the cumulative permeability of the ME in 24 h was significantly increased compared with that of the reference oil solution. The appearance of the ME was uniform, and the solution was transparent. In conclusion, compared with traditional preparations, FM and CM volatile oil ME is a novel, improved and more effective preparation for the treatment of AR.

Development of galangal essential oil-based microemulsion gel for transdermal delivery of flurbiprofen: simultaneous permeability evaluation of flurbiprofen and 1,8-cineole

Flurbiprofen (FP) is one of the most potent nonsteroidal anti-inflammatory drugs with very low bioavailability of approximately 12% following transdermal administration, compared to that after oral administration. This study aimed to deliver FP as a microemulsion (ME) gel by transdermal administration. Galangal essential oil (GEO) was extracted from Rhizoma Alpiniae Officinarum and identified by GC-MS. The most abundant constituent was determined to be 1,8-cineole (52.06%). Compared to azone, GEO was proved to exert significantly higher (p < .01) penetration enhancement effect and significantly (p < .001) lower skin cell toxicity. The formulation (FP-GEO-ME gel) was prepared using GEO as an oil phase and a penetration enhancer. Compared to that of FP solution, the enhancement ratio (ER) of FP-GEO-ME gel was 4.06. In addition, more than 25% 1,8-cineole permeated through the rat skin. In vivo pharmacokinetic studies revealed that the AUC_0-t of FP after transdermal administration of FP-GEO-ME gel was higher by approximately 4.56-fold than that of marketed FP cataplasms. The relative bioavailability of FP and 1,8-cineole after transdermal administration compared to oral administration of FP-GEO-ME were determined to be 96.58% and 85.49%, respectively. FP-GEO-ME gel significantly inhibited carrageenan-induced hind-paw edema and decreased PGE2 levels in rat serum. GEO-ME gel also exhibited significant anti-inflammatory effects at 2 h after the therapy (p < .05). The synergistic effects of FP and GEO were expected for the application of FP-GEO-ME gel. In conclusion, GEO-ME gel may be a promising formulation for transdermal administration of anti-inflammatory hydrophobic drugs, such as FP.

The Optimization Design Of Lactoferrin Loaded HupA Nanoemulsion For Targeted Drug Transport Via Intranasal Route

Background

Huperzine A (HupA) is a selective acetylcholinesterase inhibitor used to treat Alzheimer's disease. The existing dosage of HupA lacks brain selectivity and can cause serious side effects in the gastrointestinal and peripheral cholinergic systems.

Purpose

The aim of this study was to develop and characterize a HupA nanoemulsion (NE) and a targeted HupA-NE modified with lactoferrin (Lf) for intranasal administration.

Methods

The NE was formulated using pseudo-ternary phase diagrams and optimized with response surface methodology. Particle size distribution and zeta potential were evaluated, and transmission electron microscopy was performed. We investigated the transport mechanisms of HupA-NEs into hCMEC/D3 cells, an in vitro model of the blood-brain barrier. HupA-NE, Lf-HupA-NE, and HupA solution were intranasally administered to rats to investigate the brain-targeting effects of these formulations. A drug targeting index (DTI) was calculated to determine brain-targeting efficiency.

Results

Optimized HupA-NE had a particle size of 15.24±0.67 nm, polydispersity index (PDI) of 0.128±0.025, and zeta potential of -4.48±0.97 mV. The composition of the optimized HupA-NE was 3.00% isopropyl myristate (IPM), 3.81% Capryol 90, and 40% Cremophor EL + Labrasol. NEs, particularly Lf-HupA-NE, were taken up into hCMEC/D3 cells to a greater extent than pure drug alone. Western blot analysis showed that hCMEC/D3 cells contained P-glycoprotein (P-gp), breast cancer resistance protein (BCRP), and multidrug resistance associated protein 1 (MRP1) transporters. The likely mechanisms resulting in higher NE transport to the brain were uptake by specific transporters and transcytosis. In vivo, intranasal Lf-HupA-NE significantly enhanced drug delivery to the brain compared to HupA-NE, which was confirmed by differences in pharmacokinetic parameters. The DTI of Lf-HupA-NE (3.2±0.75) demonstrated brain targeting, and the area under the curve for Lf-HupA-NE was significantly higher than that for HupA-NE.

Conclusion

Lf-HupA-NE is a promising nasal drug delivery carrier for facilitating delivery of HupA to the central nervous system.

Development and Evaluation of a Water-in-oil Microemulsion Formulation for the Transdermal Drug Delivery of Teriflunomide (A771726)

Teriflunomide (TEF, A771726) is the active metabolite of leflunomide (LEF), a disease-modifying anti-rheumatic drug. The main purpose of this study was to develop and evaluate water-in-oil (W/O) microemulsion formulation of TEF. The W/O microemulsion was optimized formula is the physical and chemical stability of lecithin, ethanol, isopropyl myristate (IPM) and water (20.65/20.78/41.52/17.05 w/w) by using the pseudo-ternary phase diagram and the average droplet size is about 40 nm. The permeability of TEF microemulsion is about 6 times higher than control group in vitro penetration test. The results of anti-inflammatory effect showed that compared with the control group, the external TEF microemulsion group could significantly inhibit swelling of paw in rats, and no significant difference compared with oral LEF group. The results of hepatotoxicity test show that there were normal content of alanine aminotransferase (ALT)/aspartate aminotransferase (AST) and no obvious inflammatory infiltration of TEF microemulsion group compared with LEF group. The plasma concentration curve showed that compared with LEF group, the peak concentration of TEF microemulsion group was decreased, the half-life (t_1/2) was prolonged, and the relative bioavailability of TEF microemulsion was 75.35%. These results suggest that TEF W/O microemulsion can be used as a promising preparation to play an anti-inflammatory role while significantly reducing hepatotoxicity.

Superior Solubility and Dissolution of Zaltoprofen via Pharmaceutical Cocrystals

Objectives

Pharmaceutical cocrystals are a promising tool to enhance the solubility and dissolution of poorly soluble drugs. Zaltoprofen (ZFN) is nonsteroidal anti-inflammatory drug with a prevalent solubility problem. The present study was undertaken to enhance the solubility and dissolution of ZFN through pharmaceutical cocrystals by screening various coformers.

Materials and Methods

Cocrystals of ZFN were prepared in 1:1 and 1:2 ratio of drug:coformer by the dry grinding method. The melting point and solubility of the crystalline phase were determined. The potential cocrystals were characterized by differential scanning calorimetry (DSC), infrared spectroscopy, and powder X-ray diffraction (PXRD). Cocrystals were subjected to dissolution rate and stability study.

Results

ZFN-nicotinamide (NIC) cocrystals demonstrated deviation in melting point and solubility. The cocrystals were obtained in both 1:1 and 1:2 ratios with NIC. The infrared analysis noticeably indicated the shifting of characteristic bands of ZFN. The crystallinity of the cocrystals was evident from the XRPD pattern and notable difference in the 2θ values of intense peaks. The DSC spectra of the cocrystals exhibited altered endotherms analogous to melting point. The cocrystals showed a faster dissolution rate and a 55% increase in the extent of dissolution compared to pure drug. The cocrystals were stable at room temperature and accelerated conditions.

Conclusion

The prepared cocrystals exhibited greater solubility and dissolution compared to the pure drug and were stable at room temperature and accelerated conditions.

Biomedical applications of microemulsion through dermal and transdermal route

Microemulsions are thermodynamically stable, transparent, colloidal drug carrier system extensively used by the scientists for effective drug delivery across the skin. It is a spontaneous isotropic mixture of lipophilic and hydrophilic substances stabilized by suitable surfactant and co-surfactant. The easy fabrication, long-term stability, enhanced solubilization, biocompatibility, skin-friendly appearance and affinity for both the hydrophilic and lipophilic drug substances make it superior for skin drug delivery over the other carrier systems. The topical administration of most of the active compounds is impaired by limited skin permeability due to the presence of skin barriers. In this sequence, the microemulsion represents a cost-effective and convenient drug carrier system which successfully delivers the drug to and across the skin. In the present review work, we compiled various attempts made in last 20 years, utilizing the microemulsion for dermal and transdermal delivery of various drugs. The review emphasizes the potency of microemulsion for topical and transdermal drug delivery and its effect on drug permeability.

Preparation of Essential Oil-Based Microemulsions for Improving the Solubility, pH Stability, Photostability, and Skin Permeation of Quercetin

Quercetin can bring many benefits to skin based on its various bioactivities. However, the therapeutic effect of quercetin is limited due to the poor water solubility, pH instability, light instability, and skin permeation. The aim of the present work was applying essential oil-based microemulsions to improve the solubility, pH stability, photostability, and skin permeation of quercetin for topical application. Peppermint oil (PO-ME), clove oil (CO-ME), and rosemary oil (RMO-ME) were selected as model essential oils. Microemulsions composed of Cremophor EL/1,2-propanediol/essential oils (47:23:30, w/w) were selected as model formulations, based on the pseudo-ternary phase diagram and the characterizations. In the solubility study, the solubility of quercetin was improved dozens of times by microemulsions. Quercetin was found instable under alkaline condition, with 50% degraded in the solution of pH 13. However, PO-ME, CO-ME, and RMO-ME could protect quercetin from the hydroxide ions, with 47, 9, and 12% of quercetin degraded. In the photostability study, the essential oil-based microemulsions showed the capability of protecting quercetin from degradation under UV radiation. Where more than 67% of quercetin was degraded in aqueous solution, while less than 7% of quercetin degraded in microemulsions. At last, the in vitro skin permeation study showed that the essential oil-based microemulsions could enhance the permeation capacity of quercetin by 2.5-3 times compared to the aqueous solution. Hence, the prepared essential oil microemulsions could improve the solubility, pH stability, photostability, and skin permeation of quercetin, which will be beneficial for its topical application.

Potential of Non-aqueous Microemulsions to Improve the Delivery of Lipophilic Drugs to the Skin

In this study, non-aqueous microemulsions were developed because of the challenges associated with finding pharmaceutically acceptable solvents for topical delivery of drugs sparingly soluble in water. The formulation irritation potential and ability to modulate the penetration of lipophilic compounds (progesterone, α-tocopherol, and lycopene) of interest for topical treatment/prevention of skin disorders were evaluated and compared to solutions and aqueous microemulsions of similar composition. The microemulsions (ME) were developed with BRIJ, vitamin E-TPGS, and ethanol as surfactant-co-surfactant blend and tributyrin, isopropyl myristate, and oleic acid as oil phase. As polar phase, propylene glycol (MEPG) or water (MEW) was used (26% w/w). The microemulsions were isotropic and based on viscosity and conductivity assessment, bicontinuous. Compared to drug solutions in lipophilic vehicles, MEPG improved drug delivery into viable skin layers by 2.5-38-fold; the magnitude of penetration enhancement mediated by MEPG into viable skin increased with drug lipophilicity, even though the absolute amount of drug delivered decreased. Delivery of progesterone and tocopherol, but not lycopene (the most lipophilic compound), increased up to 2.5-fold with MEW, and higher amounts of these two drugs were released from MEW (2-2.5-fold). Both microemulsions were considered safe for topical application, but MEPG-mediated decrease in the viability of reconstructed epidermis was more pronounced, suggesting its higher potential for irritation. We conclude that MEPG is a safe and suitable nanocarrier to deliver a variety of lipophilic drugs into viable skin layers, but the use of MEW might be more advantageous for drugs in the lower range of lipophilicity.