Binding of Paclitaxel to Lipid Interfaces: Correlations with Interface Compliance

Lipid-dendrimer hybrid nanosystem as a novel delivery system for paclitaxel to treat ovarian cancer

Combining lipids and dendrimers into one formulation is an emerging platform in the drug delivery field. This study aims to (i) develop and characterize a lipid-dendrimer hybrid (LDH) nanosystem for the hydrophobic anticancer drug paclitaxel, and (ii) evaluate its in vitro and in vivo anti-cancer activity in ovarian cancer models. The LDH nanosystems were prepared from 1,2-dipalmitoyl-sn-glycero-3-phosphocholine and poly (amidoamine) (PAMAM) G4.0. The size and zeta potential of the LDH nanosystem were 37.6 ± 6.1n m and +2.9 ± 0.1 mV, respectively, with vesicular morphology observed under cryo-TEM. The encapsulation efficiency of paclitaxel in the LDH system was 78.0 ± 2.1%. The potency of paclitaxel could be significantly improved by 37-fold when presented in the LDH nanosystem as compared to free drug, whereby paclitaxel and PAMAM G4.0 acted synergistically in killing the ovarian cancer cells. As shown by fluorescence confocal microscopy, majority of the lipids in the LDH nanosystem were located in the plasma membrane, while the dendrimers were distributed intracellularly upon uptake. Despite the use of a 10-fold lower paclitaxel dose, the survival of IGROV-1 ovarian tumor-bearing animals could be significantly prolonged by the paclitaxel-loaded LDH nanosystem, as reflected by a 50% increase in the median survival time. Such hybrid nanosystem emerged from combining two established drug delivery platforms could pave way for the development of multifunctional delivery systems for potential theranostic applications.

Influence of cholesterol on liposome stability and on in vitro drug release

Cholesterol plays a strategic role in liposome composition; however, the quantity used to achieve an appropriate formulation has not been yet clarified. Therefore, by screening arrangement of lipids and cholesterol ratio, the main aim of this study is to investigate the most suitable amount of cholesterol in lipids in order to prepare stable and controlled drug release vehicles. For the preparation of liposomes, DMPC, DPPC and DSPC phospholipids were used and combined with different molar ratios of cholesterol (e.g. 100, 80-20, 70-30, 60-40 and 50-50%). Stability studies were conducted by storing the formulations at 37 and 50 °C for 30 days and by analysing them by AFM, DLS and FT-IR. By detecting the two most stable formulations from the stability results, drug encapsulation and in vitro release studies in PBS were performed by encapsulating atenolol and quinine. The release results were validated using a simulation model to ensure the reliability and suitable interpretation of the data. The generated model showed a good correlation between the prediction and the in vitro obtained results. By using 70:30% ratio (known in literature as 2:1), it is possible to reach the most stable formulation to guarantee a controlled and reproducible release for drugs with different physicochemical characteristics and pharmaceutical applications.

Liposomal paclitaxel formulations

Over the past three decades, taxanes represent one of the most important new classes of drugs approved in oncology. Paclitaxel (PTX), the prototype of this class, is an anti-cancer drug approved for the treatment of breast and ovarian cancer. However, notwithstanding a suitable premedication, present-day chemotherapy employing a commercial preparation of PTX (Taxol®) is associated with serious side effects and hypersensitivity reactions. Liposomes represent advanced and versatile delivery systems for drugs. Generally, both in vivo mice tumor models and human clinical trials demonstrated that liposomal PTX formulations significantly increase a maximum tolerated dose (MTD) of PTX which outperform that for Taxol®. Liposomal PTX formulations are in various stages of clinical trials. LEP-ETU (NeoPharm) and EndoTAG®-1 (Medigene) have reached the phase II of the clinical trials; Lipusu® (Luye Pharma Group) has already been commercialized. Present achievements in the preparation of various liposomal formulations of PTX, the development of targeted liposomal PTX systems and the progress in clinical testing of liposomal PTX are discussed in this review summarizing about 30 years of liposomal PTX development.

Liposomes with high encapsulation capacity for paclitaxel: Preparation, characterisation and in vivo anticancer effect

Paclitaxel (PTX) is approved for the treatment of ovarian and breast cancer. The commercially available preparation of PTX, Cremophor EL(R) is associated with hypersensitivity reactions in spite of a suitable premedication. In general, the developed liposomal PTX formulations are troubled with low PTX encapsulation capacity (maximal content, 3 mol%) and accompanied by PTX crystallisation. The application of "pocket-forming" lipids significantly increased the encapsulation capacity of PTX in the liposomes up to 10 mol%. Stable lyophilised preparation of PTX (7 mol%) encapsulated in the liposomes composed of SOPC/POPG/MOPC (molar ratio, 60:20:20) doped with 5 mol% vitamin E had the size distribution of 180-190 nm (PDI, 0.1) with zeta-potential of -31 mV. Sucrose was found to be a suitable cryoprotectant at the lipid:sugar molar ratios of 1:5-1:10. This liposomal formulation did not show any evidence of toxicity in C57BL/6 mice treated with the highest doses of PTX (100 mg/kg administered as a single dose and 150 mg/kg as a cumulative dose applied in three equivalent doses in 48-h intervals). A dose-dependent anticancer effect was found in both hollow fibre implants and syngenic B16F10 melanoma mouse tumour models.

X-ray diffraction from paclitaxel-loaded zwitterionic and cationic model membranes

We studied the incorporation of the hydrophobic anticancer drug paclitaxel (PXL), into a variety of lipid matrices by X-ray diffraction (XRD) measurements. Liposome suspensions from cationic and zwitterionic lipids, containing different molar fractions of paclitaxel were made and deposited on planar glass substrates. After drying at controlled relative humidity, aligned multilayer stacks were obtained. The structure perpendicular to the substrate plane was investigated by X-ray diffraction measurements. Bragg peaks to several orders were detected, indicative of well-ordered multilamellar lipid layers. The drug induced a modification of the bilayer spacing, which was the characteristic for a given type of lipid matrix. With an excess of the drug, Bragg peaks of drug crystals could be observed. The results provide insight into the solubility of paclitaxel in the different lipid membranes. A structural model of the organization of the drug in the membrane was discussed.

[Characterization and cytotoxicity of mixed PEG-DSG modified liposomes]

It is known that polyethyleneglycol (PEG) modification of the liposome surface leads to the formation of a fixed aqueous layer around the liposomes due to interaction between the PEG polymer and water molecules, which prevents the attraction of opsonins. When a combination of PEG-distearolyglycerol (PEG-DSG) whose characteristics are remarkably different is used, interaction between molecules occurs, leading to increased fixed aqueous layer thickness (FALT). From this speculation, we studied the effect of both modification of PEG900-DSG and PEG2000-DSG modified liposome on FALT, cell uptake and biodistribution. The FALT of mixed PEG modified liposome increased, compared to that of each single PEG modified liposome. In this mixed modification, maximum FALT was shown at liposome modified by added PEG-2000:PEG-900=2:1. This most suitable additional ratio was equal to actual incorporated ratio. On the other hand, cell uptake of mixed modified liposome containing doxorubicin (DOX) was similar with that of PEG2000 modified liposome. Furthermore, mixed PEG modification of liposome was tendency to increase cytotoxicity, compared to that of other modifications. After DOX contained liposome treatment, DOX distribution in the tumor and antitumor activity of DOX increase by mixed PEG modification. In conclusion, it was suggested that mixed PEG liposome (PEG-2000:PEG-900=2:1) was useful for cancer chemotherapy.

Effect of Amphiphilic Drugs on the Stability and Zeta-Potential of Their Liposome Formulations: A Study with Prednisolone, Diazepam, and Griseofulvin

Multilamellar liposomes consisting of phosphatidylcholine and incorporating prednisolone (PZ), diazepam (DZ), or griseofulvin (GF) were prepared and characterized. Liposome size, surface charge, and stability (in buffer and serum proteins) were measured for drug-incorporating liposomes and empty liposomes for comparison. The results reveal that for all drugs studied drug incorporation has a substantial effect on the vesicle zeta-potential and stability. Drug-incorporating liposomes have a negative surface charge, while their membrane integrity is significantly higher when compared with that of empty liposomes. Release of DZ from liposomes is induced by dilution. Summarizing, the results of this study demonstrate that the presence of PZ, DZ, or GF in liposome membranes has a significant effect on main vesicle properties and correlates well with those obtained previously for hydrochlorothiazide and chlorothiazide. Thereby, we may conclude that the previously demonstrated effects of the thiazides on liposome properties are not solely related to their structure.

Novel therapeutic nano-particles (lipocores): trapping poorly water soluble compounds

The development of stable spherical lipid-coated drug particles that are termed 'lipocores' is reported here. Unlike conventional lipid-based particles (i.e. liposomes, emulsions, micelles), these particles are comprised solely of a core of a poorly water soluble drug surrounded by polyethyleneglycol conjugated lipid (PEG-lipid) and are formed via a 'kinetic' trapping process. These lipocore particles were made with the acyl chain of 16 carbon length (C16) acyl-chain derivatives of paclitaxel or vinblastine and with the polyene antifungal hamycin. Formation of the particles occurred regardless of the type of PEG-phospholipid used (i.e. acyl chain length, chain saturation, and polymer length) and could also be formed with the negatively charged lipid N-glutaryl-dioleoyl-phosphatidylethanolamine (DOPE-GA). Images from both freeze-fracture electron microscopy and electron cryo-microscopy revealed solid spherical structures with no internal lamellae for the PEG-lipid particles made with the C16 derivatives of paclitaxel (BrC16-T) or vinblastine (C16-Vin). From a solute distribution study of lipocores made with BrC16-T and distearoyl-phosphatidylethanolamine-PEG2000 (DSPE-PEG2000), the particles were found to have no measurable aqueous captured volume. Fluorescence anisotropy and order parameter measurements revealed the core material of these particles to be highly immobilized. The mole ratio of BrC16-T:lipid in the lipocores was typically > 90: < 10 and as high as 98:2, and the refrigerated lipocores were stable for several months. BrC16-T/DSPE-PEG2000 lipocores of 50-100 nm particle size were far less toxic than paclitaxel (Taxol) after intraperitoneally (i.p.) or intravenously (i.v.) administration in mice and were active against i.p. and subcutaneously (s.c.) planted human (OvCar3) ovarian carcinoma grown in SCID mice. It is believed the high drug:lipid ratio, the stability, and therapeutic efficacy of these novel particles make them a paradigm for delivery of poorly water soluble drugs and/or their hydrophobic derivatives.