Transmission and scanning electron microscope preparations of the same cell culture

Multi-host model-based identification of Armillifer agkistrodontis (Pentastomida), a new zoonotic parasite from China

BACKGROUND

Pentastomiasis is a rare parasitic infection of humans. Pentastomids are dioecious obligate parasites requiring multiple hosts to complete their lifecycle. Despite their worm-like appearance, they are commonly placed into a separate sub-class of the subphylum Crustacea, phylum Arthropoda. However, their systematic position is not uncontested and historically, they have been considered as a separate phylum.

METHODOLOGY/PRINCIPAL FINDINGS

An appraisal of Armillifer agkistrodontis was performed in terms of morphology and genetic identification after its lifecycle had been established in a multi-host model, i.e., mice and rats as intermediate hosts, and snakes (Agkistrodon acutus and Python molurus) as definitive hosts. Different stages of the parasite, including eggs, larvae and adults, were isolated and examined morphologically using light and electron microscopes. Phylogenetic and cluster analysis were also undertaken, focusing on the 18S rRNA and the Cox1 gene. The time for lifecycle completion was about 14 months, including 4 months for the development of eggs to infectious larvae in the intermediate host and 10 months for infectious larvae to mature in the final host. The main morphological difference between A. armillatus and Linguatula serrata is the number of abdominal annuli. Based on the 18S rRNA sequence, the shortest hereditary distance was found between A. agkistrodontis and Raillietiella spp. The highest degree of homology in the Cox 1 nucleic acid sequences and predicted amino acid sequences was found between A. agkistrodontis and A. armillatus.

CONCLUSION

This is the first time that a multi-host model of the entire lifecycle of A. agkistrodontis has been established. Morphologic and genetic analyses supported the notion that pentastomids should be placed into the phylum Arthropoda.

In situ embedding of cell monolayers cultured on plastic surfaces for electron microscopy

Various procedures suitable for routine in situ embedding of cell monolayers were tested including: (1) the use of different Epon substitutes, (2) the use of different types of plasticware obtained from different sources, and (3) different methods of preparing capsules for sectioning. Different resins reacted differently with different plastics and type of preparation. Merck Epon substitute bound to most of the plastics tested. Ladd Epon substitute released cleanly from all plastics tested when a suitable method of preparation was used. The results show that for routine embedding of cell monolayers it is necessary to select an appropriate Epon substitute and method of preparation of capsules for the type of plasticware used. A routine method is described, with various alternative steps which can be applied when particular difficulties are encountered.

Light, scanning, and transmission electron microscopy of a single population of detergent-extracted cardiac myocytes in vitro

A technique for performing light, scanning, and transverse transmission electron microscopy on cultured cells grown within a single tissue culture flask is described. Permanent light microscopy slides are obtained by removing selected portions of the plastic tissue culture vessel and mounting them on glass slides with an aqueous mounting solution. The images obtained from these slides are superior to viewing through the bottom of the flask with an inverted stage microscope. For scanning electron microscopy, selected areas are also cut from the remainder of the vessel and prepared for viewing. The final portion of the culture container is transferred and attached to a new tissue culture vessel and prepared for transmission electron microscopy using alcohol instead of acetone and propylene oxide during dehydration, infiltration, and embedding.

Preparation of cultured mammalian cells for transmission and scanning electron microscopy using Aclar film

Common methods for the preparation of cultured cells for concurrent light microscopy (LM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) are not completely satisfactory. This article describes how we grow mammalian cells on plastic disks made from Aclar film. Aclar is a transparent fluorinated-chlorinated thermoplastic that contains no volatile components and is, for all practical purposes, chemically inert. Cells adhere to it readily and remain attached after fixation, dehydration, and critical-point drying or embedding. The film also accepts heavy metal coating by ionic bombardment and is extremely stable in the vacuum of the SEM. LM observations are unhindered by Aclar, since the film is as transparent as glass. Fluorescence microscopy is possible with this film, since it exhibits no detectable autofluorescence. During SEM observation, the film has great dimensional stability, and the cells and heavy metal coating remain attached to the Aclar even under high-resolution operating conditions. TEM processing of specimens grown on Aclar is simplified by the fact that Aclar does not stick to the epoxy resins used in EM. Furthermore, Aclar is easily sectioned and does not damage knives used in ultramicrotomy. The use of Aclar film considerably simplifies the preparation of cultured cells for all types of microscopy. This method is particularly useful in correlating surface features between SEM and TEM observations.

Versatile method for evaluating a cell culture by various morphological techniques

Cellulose acetate is a versatile material for evaluating cells grown under identical conditions by various morphological techniques. This inexpensive material is transparent, easily cut to size and shape, nontoxic to cell cultures, and resistant to most chemicals used in histochemistry and in scanning and transmission electron microscopy. Samples may be obtained during and after the culture process. Cellulose acetate slides can be mounted directly over glass slides for direct observation and are easily peeled off plastic blocks for electron microscopy, leaving the cells behind. Relative disadvantages include its autofluorescence and a tendency to soften in strong acids or pure solutions of organic solvents such as xylene and propylene oxide.

The use of polystyrene microcarriers to prepare cell monolayers for transmission electron microscopy

A simple method is described, using polystyrene microcarrier beads, that allows cell monolayers to be prepared without distortion for transmission electron microscopy. Cells cultured on polystyrene beads (Biosilon R, Nunc, Kamstrup, Denmark) are held in an agar matrix. Before embedding, the beads are dissolved in 1,2-epoxypropane. The technique increased the number of observable cells, when compared to preparations of planar monolayers, and there is good preservation of morphological detail.

The enucleation of cells on plastic Leighton coverslips

A simple enucleation technique that facilitates autoradiographic and electron microscopic examination of cytoplasms is described. Cells were grown on commercially available plastic Leighton coverslips and these were centrifuged in the presence of cytochalasin B. The centrifugation requires no special holders and only a high speed centrifuge. Enucleation frequencies of greater than 90% were obtained for Chinese hamster fibroblasts and mouse B-82 cells.

Variant endothelial cells. Fibronectin as a transducer of signals for migration and neovascularisation

A morphologic and growth control variant of bovine aortal endothelial cells has been isolated and shown to synthesise factor VIII antigen (McAuslan and Reilly '79). The variant also possesses the endothelial surface markers angiotensin converting enzyme and alpha 2-microglobulin. The normal cell synthesises fibronectin and deposits it underneath the cells; the variant also synthesises fibronectin. At least three times more fibronectin is distributed over the upper cell surface of variants. This correlates with the three-fold increased binding of the replication inhibitor Con A and suggests a role of fibronectin in endothelial cell growth control. When stimulated to migrate by CuII ions, the variant leaves deposits of fibronectin in its trail; in contrast, migrating normal cells do not, but they do redistribute their surface fibronectin. As revealed by scanning electron microscopy, variant cells are unusual in that they grow over or under cultured normal endothelial cells. It is proposed that during the process of neovascularisation, variant cells have a special function as lead cells that lay down fibronectin on which an endothelium can become established.

Improved handling of structural fragile cell-biological specimens during electron microscopic preparation by the exchange method

An exact method of preparation of soft biological specimens for electron microscopic analysis of surface fine structures is described. It allows routine preparations of fragile specimens for SEM and TEM imaging modes. With this procedure physical preparation parameters such as mechanical loads on the specimen surface or changes of temperature are controlled. The wet specimens are premounted in cheap disposable BEEM-containers or glass boats and are constantly kept under liquid in a closed system. The exchange of preparation media is performed continuously and, if necessary, over gradients. For comparative investigations with different EM-modes, at each step of the procedure parts of the specimens may be removed for individual processing. Conventionally prepared critical-point dried specimens are compared to those processed by the exchange technique and preservation of surface fine structures is demonstrated. Shadow-casted clathrin cages and stereo-replicas of virus infected cell cultures are shown in TEM preparations. For SEM, coverslip cell cultures and isolated glomerulus basement membranes are prepared and an additional flat embedding for TEM ultrathin sections is demonstrated.

Fine structure of IMR-90 cells in culture as examined by scanning and transmission electron microscopy

Cells from the new strain IMR-90 were examined by scanning (SEM) and transmission (TEM) electron microscopy at early, middle, and late population doubling levels. The cells are characteristically flattened and elongated and arranged in clusters from 1 to several cells thick. Long thin processes extend from the poles and sides of the cells. The number of blebs and microvilli on the cell surface varies. In later population doubling level (PDL) cultures, a larger number of cells have greater quantities of microvilli on their surface. It is suggested that the increased number of microvilli might represent an increased level of differentiation. By TEM the cells typically have elongated to oval shaped nuclei which are sometimes deeply invaginated. The cytoplasm contains a well developed Golgi region, elongated mitochondria, microtubules, filaments, a variety of vesicles, vacuoles and dense bodies and large amounts of RNA in the form of granular endoplasmic reticulum and ribosomes. Cytoplasmic appearance, particularly the number of dense bodies, varies widely at all PDL. With increasing PDL, cells tend to have nuclei with more condensed chromatin, and a cytoplasm containing less mitochondria and granular endoplasmic reticulum and more dense bodies. Also at later PDL there is a higher frequency of cells containing long, thin dense mitochondria as well as bizarre shaped mitochondria. In older populations there are many cells in a state of filamentous degeneration. Cells with large numbbers of surface projections (microvilli) tend to be correlated with an osmiophilic cytoplasm containing many filaments and numerous dense bodies.