Selective delivery of adriamycin to a solid tumor using a polymeric micelle carrier system

Halofuginone micelle nanoparticles eradicate Nrf2-activated lung adenocarcinoma without systemic toxicity

The Keap1-Nrf2 system is the master regulator of the cellular response against oxidative and xenobiotic stresses. Constitutive activation of Nrf2 is frequently observed in various types of cancers. Nrf2 hyperactivation induces metabolic reprogramming in cancer cells, which supports the increased energy demand required for rapid proliferation and confers high-level resistance against anticancer radio/chemotherapy. Hence, Nrf2 inhibition has emerged as an attractive therapeutic strategy to counter such acquired resistance in Nrf2-activated tumors. We previously identified Halofuginone (HF) as a promising Nrf2 inhibitor. In this study, we pursued preclinical characterization of HF and found that while HF markedly reduced the viability of cancer cells, it also caused severe hematopoietic and immune cell suppression in a dose-dependent manner. Hence, to overcome this toxicity, we decided to employ a nanomedicine approach to HF. We found that encapsulation of HF into a polymeric micelle (HF micelle; HFm) largely relieved the systemic toxicity exhibited by free HF while maintaining the tumor-suppressive properties of HF. LC-MS/MS analysis revealed that the reduction in the magnitude of adverse effects was the result of the ability to release HF from the HFm core in a slow and sustained manner. These results thus support the contention that HFm will potentially counteract Nrf2-activated cancers in the clinical settings.

Exploiting ionisable nature of PEtOx-co-PEI to prepare pH sensitive, doxorubicin-loaded micelles

AIMS

This study was conducted to evaluate block copolymers containing two different poly(ethyleneimine) (PEI) amounts, as new pH-sensitive micellar delivery systems for doxorubicin.

METHODS

Micelles were prepared with block copolymers consisting of poly(2-ethyl-2-oxazoline)-co-poly(ethyleneimine) (PEtOx-co-PEI) and poly(ε-caprolactone) (PCL) as hydrophilic and hydrophobic blocks, respectively. Doxorubicin loading, micelle size, pH-dependent drug release, and in vitro cytotoxicity on MCF-7 cells were investigated.

RESULTS

The average size of drug-loaded micelles was under 100 nm and drug loading was between 10.7% and 48.3% (w/w). pH-sensitive drug release was more pronounced (84.7% and 68.9% (w/w) of drug was released at pH 5.0 and pH 7.4, respectively) for the micelles of the copolymer with the lowest PEI amount. The cell viability of doxorubicin-loaded micelles which were prepared by the copolymer with the lowest PEI amount was 28-33% at 72 h.

CONCLUSIONS

PEtOx-co-PEI-b-PCL micelles of this copolymer were found to be stable and effective pH-sensitive nano-sized carriers for doxorubicin delivery.

Polymeric Micelles of Biodegradable Diblock Copolymers: Enhanced Encapsulation of Hydrophobic Drugs

Polymeric micelles are potentially efficient in encapsulating and performing the controlled release of various hydrophobic drug molecules. Understanding the fundamental physicochemical properties behind drug⁻polymer systems in terms of interaction strength and compatibility, drug partition coefficient (preferential solubilization), micelle size, morphology, etc., encourages the formulation of polymeric nanocarriers with enhanced drug encapsulating capacity, prolonged circulation time, and stability in the human body. In this review, we systematically address some open issues which are considered to be obstacles inhibiting the commercial availability of polymer-based therapeutics, such as the enhancement of encapsulation capacity by finding better drug⁻polymer compatibility, the drug-release kinetics and mechanisms under chemical and mechanical conditions simulating to physiological conditions, and the role of preparation methods and solvents on the overall performance of micelles.

Photo Irradiation-Induced Core Crosslinked Poly(ethylene glycol)-block-poly(aspartic acid) Micelles: Optimization of Block Copolymer Synthesis and Characterization of Core Crosslinked Micelles

We used photo irradiation to design core crosslinked polymeric micelles whose only significant physico-chemical change was in their physico-chemical stability, which helps elucidate poly(ethylene glycol) (PEG)-related immunogenicity. Synthetic routes and compositions of PEG-b-poly(aspartic acid) block copolymers were optimized with the control of n-alkyl chain length and photo-sensitive chalcone moieties. The conjugation ratio between n-alkyl chain and the chalcone moieties was controlled, and upon the mild photo irradiation of polymeric micelles, permanent crosslink proceeded in the micelle cores. In the optimized condition, the core crosslinked (CCL) micelles exhibited no dissociation while the non-CCL micelles exhibited dissociation. These results indicate that the photo-crosslinking reactions in the inner core were successful. A gel-permeation chromatography (GPC) measurement revealed a difference between the micellar-formation stability of CCL micelles and that of the non-CCL micelles. GPC experiments revealed that the CCL micelles were more stable than the non-CCL micelles. Our research also revealed that photo-crosslinking reactions did not change the core property for drug encapsulation. In conclusion, the prepared CCL micelles exhibited the same diameter, the same formula, and the same inner-core properties for drug encapsulation as did the non-CCL micelles. Moreover, the CCL micelles exhibited non-dissociable micelle formation, while the non-CCL micelles exhibited dissociation into single block copolymers.

Self-assembling prodrugs

Covalent modification of therapeutic compounds is a clinically proven strategy to devise prodrugs with enhanced treatment efficacies. This prodrug strategy relies on the modified drugs that possess advantageous pharmacokinetic properties and administration routes over their parent drug. Self-assembling prodrugs represent an emerging class of therapeutic agents capable of spontaneously associating into well-defined supramolecular nanostructures in aqueous solutions. The self-assembly of prodrugs expands the functional space of conventional prodrug design, affording a possible pathway to more effective therapies as the assembled nanostructure possesses distinct physicochemical properties and interaction potentials that can be tailored to specific administration routes and disease treatment. In this review, we will discuss the various types of self-assembling prodrugs in development, providing an overview of the methods used to control their structure and function and, ultimately, our perspective on their current and future potential.

Structure-biocompatibility and transfection activity relationships of cationic polyaspartamides with (dialkylamino)alkyl and alkyl or hydroxyalkyl side groups

A series of 14 cationic derivatives of poly(aspartic acid) i.e. cationic polyaspartamides with different (dialkylamino)alkyl and alkyl or hydroxyalkyl side groups was synthesized by nucleophilic addition on polysuccinimide. The resulting polyaspartamides have moderate amphiphilic properties. Relationships between the structure and ratio of side groups and in vitro properties of polyaspartamides, including their cytotoxic and membrane-damaging activity towards human cell lines, primary skin fibroblasts and erythrocytes, were established and discussed. Cationic polyaspartamides vary in their DNA-binding, condensing and nuclease-protecting characteristics depending on the concentration ratio of (dialkylamino)alkyl and alkyl or hydroxyalkyl side groups. Effective cell transfection was achieved upon polyaspartamide-mediated plasmid DNA delivery in serum-free medium in the presence of chloroquine. Effect of serum proteins adsorption onto polyaspartamide based polyplexes, and the role of concentration of polyplexes in culture medium in their colloidal stability and transfection process were demonstrated. Synthesized polyaspartamides are biocompatible and long-acting gene carriers, which are applied to cells after dilution and without washing, thus providing transfection level comparable to that of commercial transfection reagent.

Self-assembly, doxorubicin-loading and antibacterial activity of well-defined ABA-type amphiphilic poly(N-vinylpyrrolidone)-b-poly(d,l-lactide)-b-poly(N-vinyl pyrrolidone) triblock copolymers

Synthesis, self-assembly, DOX-loading and antibacterial activity of well-defined ABA-type amphiphilic poly(N-vinylpyrrolidone)-b-poly(d,l-lactide)-b-poly(N-vinylpyrrolidone) triblock copolymers.

Polymeric micelles as drug carriers: their lights and shadows

In this review, polymeric micelles as drug-targeting carriers are concisely explained. In the first introduction part, I describe a brief history of polymer micelle's research for drug targeting, and then I explain this review's focus. Since most other review articles concerning polymeric micelle carriers explain only what was achieved in the polymeric micelle's research, I describe this review by focusing on what was not done. In the second part, I take up three characteristics of polymeric micelle carriers by comparing their advantages and disadvantages, what was done and what was not done in the past studies, and what is easily achieved and what is difficult to be achieved with polymeric micelles. In the last part, I discuss three common problems of nano-sized drug carrier systems including polymeric micelles, and then I add a few comments on these problems.

Polypeptide-based Micelles for Delivery of Irinotecan: Physicochemical and In vivo Characterization

PURPOSE

Irinotecan (IRI) is a broad spectrum chemotherapeutic agent used individually or in combination to treat multiple malignancies. Present study aimed at developing polypeptide-based block ionomer complex (BIC) micelles to improve the pharmacokinetic and antitumor response of IRI.

METHODS

Irinotecan-loaded BIC micelles (IRI-BIC) was prepared and evaluated in terms of various physicochemical and biological parameters including size, shape, release, cytotoxicity, and pharmacokinetic analysis. In vivo antitumor efficacy was investigated in SCC-7 bearing xenograft tumor model.

RESULTS

IRI was successfully incorporated into the ionic cores of poly(ethylene glycol)-b-poly(aspartic acid) (PEG-b-PAA) with a high drug loading capacity (~80%). The electrostatically assembled BIC micelles were nanosized (~50 nm) with uniform size distribution pattern (PDI~0.1). The BIC micelles exhibited pH-sensitiveness with limited release of IRI at physiological conditions and significantly enhanced the release rate at acidic conditions, making it an ideal delivery system for tumor targeting. The IRI-BIC showed a dose-dependent cytotoxicity in SCC-7 and A-549 cancer cell lines. Pharmacokinetic studies clearly showed that BIC micelles improved the IRI blood circulation time and decreased its elimination rate constant, while that of free IRI, rapidly eliminated from the central compartment. Moreover, IRI-BIC showed superior therapeutic performance with no toxicity in BALB/c nude xenograft mice. The micelle treated group showed an inhibition rate of ~66% compared to free IRI treated group.

CONCLUSIONS

Taken together, BIC micelles could be a potentially useful nanovehicle with promising applicability in systemic tumor treatment.

Ultrasonically triggered drug delivery: breaking the barrier

The adverse side-effects of chemotherapy can be minimized by delivering the therapeutics in time and space to only the desired target site. Ultrasound offers one fairly non-invasive method of accomplishing such precise delivery because its energy can disrupt nanosized containers that are designed to sequester the drug until the ultrasonic event. Such containers include micelles, liposomes and solid nanoparticles. Conventional micelles and liposomes are less acoustically sensitive to ultrasound because the strongest forces associated with ultrasound are generated by gas-liquid interfaces, which both of these conventional constructs lack. Acoustically activated carriers often incorporate a gas phase, either actively as preformed bubbles, or passively such as taking advantage of dissolved gasses that form bubbles upon insonation. Newer concepts include using liquids that form gas when insonated. This review focuses on the ultrasonically activated delivery of therapeutics from micelles, liposomes and solid particles. In vitro and in vivo results are summarized and discussed. Novel structural concepts from micelles and liposomes are presented. Mechanisms of ultrasonically activated release are discussed. The future of ultrasound in drug delivery is envisioned.

Nanomedicines for cancer therapy: state-of-the-art and limitations to pre-clinical studies that hinder future developments

The ability to efficiently deliver a drug or gene to a tumor site is dependent on a wide range of factors including circulation time, interactions with the mononuclear phagocyte system, extravasation from circulation at the tumor site, targeting strategy, release from the delivery vehicle, and uptake in cancer cells. Nanotechnology provides the possibility of creating delivery systems where the design constraints are decoupled, allowing new approaches for reducing the unwanted side effects of systemic delivery, increasing tumor accumulation, and improving efficacy. The physico-chemical properties of nanoparticle-based delivery platforms introduce additional complexity associated with pharmacokinetics, tumor accumulation, and biodistribution. To assess the impact of nanoparticle-based delivery systems, we first review the design strategies and pharmacokinetics of FDA-approved nanomedicines. Next we review nanomedicines under development, summarizing the range of nanoparticle platforms, strategies for targeting, and pharmacokinetics. We show how the lack of uniformity in preclinical trials prevents systematic comparison and hence limits advances in the field.

[Utilization of polymeric micelle magnetic resonance imaging (MRI) contrast agent for theranostic system]

We applied a polymeric micelle carrier system for the targeting of a magnetic resonance imaging (MRI) contrast agent. Prepared polymeric micelle MRI contrast agent exhibited a long circulation characteristic in blood, and considerable amount of the contrast agent was found to accumulate in colon 26 solid tumor by the EPR effect. The signal intensities of tumor area showed 2-folds increase in T1-weighted images at 24 h after i.v. injection. To observe enhancement of the EPR effect by Cderiv pretreatment on tumor targeting, we used the contrast agent for the evaluation by means of MRI. Cderiv pretreatment significantly enhanced tumor accumulation of the contrast agent. Interestingly, very high signal intensity in tumor region was found at 24 h after the contrast agent injection in Cderiv pretreated mice. The contrast agent visualized a microenvironmental change in tumor. These results indicate that the contrast agent exhibits potential use for tumor diagnostic agent. To combine with a polymeric micelle carrier system for therapeutic agent, the usage of the combination makes a new concept of "theranostic" for a better cancer treatment.

Thermosensitive AB4 four-armed star PNIPAM-b-HTPB multiblock copolymer micelles for camptothecin drug release

Thermo-sensitive poly(N-isoproplacrylamide)m-block-hydroxyl-terminated polybutadiene-block-poly(N-isoproplacrylamide)m (PNIPAMm-b-HTPB-b-PNIPAMm, m = 1 or 2) block copolymers, AB4 four-armed star multiblock and linear triblock copolymers, were synthesized by ATRP with HTPB as central blocks, and characterization was performed by (1)H NMR, Fourier transform infrared, and size exclusion chromatography. The multiblock copolymers could spontaneously assemble into more regular spherical core-shell nanoscale micelles than the linear triblock copolymer. The physicochemical properties were detected by a surface tension, nanoparticle analyzer, transmission electron microscope (TEM), dynamic light scattering, and UV-vis measurements. The multiblock copolymer micelles had lower critical micelle concentration than the linear counterpart, TEM size from 100 to 120 nm, and the hydrodynamic diameters below 150 nm. The micelles exhibited thermo-dependent size change, with low critical solution temperature of about 33-35 °C. The characteristic parameters were affected by the composition ratios, length of PNIPAM blocks, and molecular architectures. The camptothecin release demonstrated that the drug release was thermo-responsive, accompanied by the temperature-induced structural changes of the micelles. MTT assays were performed to evaluate the biocompatibility or cytotoxicity of the prepared copolymer micelles.

Thermosensitive PNIPAM-b-HTPB block copolymer micelles: molecular architectures and camptothecin drug release

Two kinds of thermo-sensitive poly(N-isoproplacrylamide) (PNIPAM) block copolymers, AB4 four-armed star multiblock and linear triblock copolymers, were synthesized by ATRP with hydroxyl-terminated polybutadiene (HTPB) as central blocks, and characterization was performed by (1)H NMR, FT-IR and SEC. The multiblock copolymers could spontaneously assemble into more regular spherical core-shell nanoscale micelles than the linear triblock copolymer. The physicochemical properties were detected by a surface tension technique, nano particle analyzer, TEM, DLS and UV-vis measurements. The multiblock copolymer micelles had lower critical micelle concentration than the linear counterpart, TEM size from 100 to 120 nm and the hydrodynamic diameters below 150 nm. The micelles exhibited thermo-dependent size change, with low critical solution temperature about 33-35 °C. The characteristic parameters were affected by the composition ratios, length of PNIPAM blocks and molecular architectures. The camptothecin release demonstrated that the drug release was thermo-responsive, accompanied by the temperature-induced structural changes of the micelles. MTT assays were performed to evaluate the biocompatibility or cytotoxicity of the prepared copolymer micelles.

Poly(2-oxazoline)s as polymer therapeutics

Poly(2-oxazoline)s (POx) are currently discussed as an upcoming polymer platform for biomaterials design and especially for polymer therapeutics. POx meet specific requirements needed for the development of next-generation polymer therapeutics such as biocompatibility, high modulation of solubility, variation of size, architecture as well as chemical functionality. Although in the early 1990s first and promising POx-based systems were presented, the field lay dormant for almost two decades. Only very recently, POx-based polymer therapeutics came back into the focus of very intensive research. In this review, we give an overview on the chemistry and physicochemical properties of POx and summarize the research of POx-protein conjugates, POx-drug conjugates, POx-based polyplexes and POx micelles for drug delivery.

Anticancer nanomedicine and tumor vascular permeability; Where is the missing link?

Anticancer nanomedicine was coined to describe anticancer delivery systems such as polymer conjugates, liposomes, micelles, and metal nanoparticles. These anticancer delivery platforms have been developed with the enhanced permeability and retention (EPR) effect as a central mechanism for tumor targeting. EPR based nanomedicine has demonstrated, beyond doubt, to selectively target tumor tissues in animal models. However, over the last two decades, only nine anticancer agents utilizing this targeting strategy have been approved for clinical use. In this review, we systematically analyze various aspects that explain the limited clinical progress yet achieved. The influence of nanomedicine physicochemical characteristics, animal tumor models, and variations in tumor biology, on EPR based tumor targeting is closely examined. Furthermore, we reviewed results from over one hundred publications to construct patterns of factors that can influence the transition of EPR based anticancer nanomedicine to the clinic.

Invertible micellar polymer assemblies for delivery of poorly water-soluble drugs

Strategically designed amphiphilic invertible polymers (AIPs) are capable of (i) self-assembling into invertible micellar assemblies (IMAs) in response to changes in polarity of environment, polymer concentration, and structure, (ii) accommodating (solubilizing) substances that are otherwise insoluble in water, and (iii) inverting their molecular conformation in response to changes in the polarity of the local environment. The unique ability of AIPs to invert the molecular conformation depending on the polarity of the environment can be a decisive factor in establishing the novel stimuli-responsive mechanism of solubilized drug release that is induced just in response to a change in the polarity of the environment. The IMA capability to solubilize lipophilic drugs and deliver and release the cargo molecules by conformational inversion of polymer macromolecules in response to a change of the polarity of the environment was demonstrated by loading IMA with a phytochemical drug, curcumin. It was demonstrated that four sets of micellar vehicles based on different AIPs were capable of delivering the curcumin from water to an organic medium (1-octanol) by means of unique mechanism: AIP conformational inversion in response to changing polarity from polar to nonpolar. The IMAs are shown to be nontoxic against human cells up to a concentration of 10 mg/L. On the other hand, the curcumin-loaded IMAs are cytotoxic to breast carcinoma cells at this concentration, which confirms the potential of IMA-based vehicles in controlled delivery of poorly water-soluble drug candidates and release by means of this novel stimuli-responsive mechanism.

Evaluation of intracellular trafficking and clearance from HeLa cells of doxorubicin-bound block copolymers

New technologies are needed to deliver medicines safely and effectively. Polymeric nanoparticulate carriers are one such technology under investigation. We examined the intracellular trafficking of doxorubicin-bound block copolymers quantitatively and by imaging doxorubicin-derived fluorescence using confocal microscopy. The polymers were internalized by endocytosis and distributed in endosomal/lysosomal compartments and the endoplasmic reticulum; unlike free doxorubicin, the polymers were not found in the nucleus. Moreover, the ATP-binding cassette protein B1 (ABCB1) transporter may be involved in the efflux of the polymer from cells. This drug delivery system is attractive because the endogenous transport system is used for the uptake and delivery of the artificial drug carrier to the target as well as for its efflux from cells to medium. Our results show that a drug delivery system strategy targeting this endogenous transport pathway may be useful for affecting specific molecular targets.

Cellular delivery of PEGylated PLGA nanoparticles

OBJECTIVES

The objective of this study was to investigate the efficiency of uptake of PEGylated polylactide-co-gycolide (PLGA) nanoparticles by breast cancer cells.

METHODS

Nanoparticles of PLGA containing various amounts of polyethylene glycol (PEG, 5%-15%) were prepared using a double emulsion solvent evaporation method. The nanoparticles were loaded with coumarin-6 (C6) as a fluorescence marker. The particles were characterized for surface morphology, particle size, zeta potential, and for cellular uptake by 4T1 murine breast cancer cells.

KEY FINDINGS

Irrespective of the amount of PEG, all formulations yielded smooth spherical particles. However, a comparison of the particle size of various formulations showed bimodal distribution of particles. Each formulation was later passed through a 1.2 µm filter to obtain target size particles (114-335 nm) with zeta potentials ranging from -2.8 mV to -26.2 mV. While PLGA-PEG di-block (15% PEG) formulation showed significantly higher 4T1 cellular uptake than all other formulations, there was no statistical difference in cellular uptake among PLGA, PLGA-PEG-PLGA tri-block (10% PEG), PLGA-PEG di-block (5% PEG) and PLGA-PEG di-block (10% PEG) nanoparticles.

CONCLUSION

These preliminary findings indicated that the nanoparticle formulation prepared with 15% PEGylated PLGA showed maximum cellular uptake due to it having the smallest particle size and lowest zeta potential.

The transferrin receptor and the targeted delivery of therapeutic agents against cancer

BACKGROUND

Traditional cancer therapy can be successful in destroying tumors, but can also cause dangerous side effects. Therefore, many targeted therapies are in development. The transferrin receptor (TfR) functions in cellular iron uptake through its interaction with transferrin. This receptor is an attractive molecule for the targeted therapy of cancer since it is upregulated on the surface of many cancer types and is efficiently internalized. This receptor can be targeted in two ways: 1) for the delivery of therapeutic molecules into malignant cells or 2) to block the natural function of the receptor leading directly to cancer cell death.

SCOPE OF REVIEW

In the present article we discuss the strategies used to target the TfR for the delivery of therapeutic agents into cancer cells. We provide a summary of the vast types of anti-cancer drugs that have been delivered into cancer cells employing a variety of receptor binding molecules including Tf, anti-TfR antibodies, or TfR-binding peptides alone or in combination with carrier molecules including nanoparticles and viruses.

MAJOR CONCLUSIONS

Targeting the TfR has been shown to be effective in delivering many different therapeutic agents and causing cytotoxic effects in cancer cells in vitro and in vivo.

GENERAL SIGNIFICANCE

The extensive use of TfR for targeted therapy attests to the versatility of targeting this receptor for therapeutic purposes against malignant cells. More advances in this area are expected to further improve the therapeutic potential of targeting the TfR for cancer therapy leading to an increase in the number of clinical trials of molecules targeting this receptor. This article is part of a Special Issue entitled Transferrins: molecular mechanisms of iron transport and disorders.

Carbon monoxide-releasing micelles for immunotherapy

With the discovery of important biological roles of carbon monoxide (CO), the use of this gas as a therapeutic agent has attracted attention. However, the medical application of this gas has been hampered by the complexity of the administration method. To overcome this problem, several transition-metal carbonyl complexes, such as Ru(CO)(3)Cl(glycinate), [Ru(CO)(3)Cl(2)](2), and Fe(η(4)-2-pyrone)(CO)(3), have been used as CO-releasing molecules both in vitro and in vivo. We sought to develop micellar forms of metal carbonyl complexes that would display slowed diffusion in tissues and thus better ability to target distal tissue drainage sites. Specifically, we aimed to develop a new CO-delivery system using a polymeric micelle having a Ru(CO)(3)Cl(amino acidate) structure as a CO-releasing segment. The CO-releasing micelles were prepared from triblock copolymers composed of a hydrophilic poly(ethylene glycol) block, a poly(ornithine acrylamide) block bearing Ru(CO)(3)Cl(ornithinate) moieties, and a hydrophobic poly(n-butylacrylamide) block. The polymers formed spherical micelles in the range of 30-40 nm in hydrodynamic diameter. Further characterization revealed the high CO-loading capacity of the micelles. CO-release studies showed that the micelles were stable in physiological buffer and serum and released CO in response to thiol-containing compounds such as cysteine. The CO release of the micelles was slower than that of Ru(CO)(3)Cl(glycinate). In addition, the CO-releasing micelles efficiently attenuated the lipopolysaccharide-induced NF-κB activation of human monocytes, while Ru(CO)(3)Cl(glycinate) did not show any beneficial effects. Moreover, cell viability assays revealed that the micelles significantly reduced the cytotoxicity of the Ru(CO)(3)Cl(amino acidate) moiety. This novel CO-delivery system based on CO-releasing micelles may be useful for therapeutic applications of CO.