Stability and in vivo evaluation of pullulan acetate as a drug nanocarrier

Biomimetic platelet-camouflaged drug-loaded polypyrrole for the precise targeted antithrombotic therapy

Lower extremity deep venous thrombosis (LEDVT) affects patient's quality of life for a long time, and even causes pulmonary embolism, which threatens human health. Current anticoagulant drugs in clinical treatment are hampered by the risk of bleeding due to poor targeting and low drug penetration. Here, we used platelet (PLT)-like biological targeting to enhance the delivery and accumulation of nanomedicines in thrombus and reduce the risk of bleeding. Meanwhile, the parallel strategy of "thrombus thermal ablation and anticoagulation" was applied to increase the permeability of drugs in thrombus and achieve the optimal antithrombotic effect. Polypyrrole (PPy) and rivaroxban (Riv, an anticoagulant drug) were co-assembled into platelet membrane-coated nanoparticles (NPs), PLT-PPy/Riv NPs, which actively targeted the thrombotic lesion at multiple targets in the platelet membrane and were thermally and drug-specific thrombolysed by 808 nm laser irradiation. The combination therapy resulted in up to 90% thrombolysis in a femoral vein thrombosis model compared to single phototherapy or drug therapy. The results showed that the nanoformulation provided a new direction for remote precise and controlled sustained thrombolysis, which was in line with the trend of nanomedicine towards clinical translation.

A Study of Hydrophobically Modified Pullulan Nanoparticles with Different Hydrophobic Densities on the Effect of Anti-Colon Cancer Cell Efficiency

To discuss the effect of hydrophobic groups of a polymer on the structural properties and function of polymer nanoparticles (NPs), we grafted chenodeoxycholic acid (CDCA) with pullulan (PU) to form hydrophobically modified PU (PUC). Three PUC polymers, namely, PUC-1, PUC-2, and PUC-3, with different degrees of substitution were designed by changing the feed ratio of CDCA and PU. ¹H-NMR spectra showed that the PUC polymer was successfully synthesized, and the degrees of hydrophobic substitution for PUC-1, PUC-2, and PUC-3 were calculated to be 10.66%, 13.92%, and 16.94%, respectively. The PUC NPs were prepared by the dialysis method and were shown to be uniformly spherical by transmission electron microscopy (TEM). The average sizes were about (220±10) nm, (203±7) nm, and (163±6) nm under dynamic light scattering (DLS) for PUC-1 NPs, PUC-2 NPs, and PUC-3 NPs, respectively. Drug release experiments showed that the three PUC/DOX NPs exhibited good sustained release. At 48 h, the IC₅₀ of doxorubicin in inhibiting colon cancer HCT116 cells was 0.0904 μg/mL. A cell study showed that PUC-3/DOX NPs had the highest uptake efficiency by HCT116 cells with the most cytotoxicity and inhibited the migration of HCT116 cells with the highest efficiency. The structural properties and function of polymer NPs were closely related to the hydrophobic groups in the polymer, and NPs with higher hydrophobicity showed a smaller size, higher drug capacity, and greater cell efficiency.

Chitosan, Polyethylene Glycol and Polyvinyl Alcohol Modified MgFe2O4 Ferrite Magnetic Nanoparticles in Doxorubicin Delivery: A Comparative Study In Vitro

Cancer-based magnetic theranostics has gained significant interest in recent years and can contribute as an influential archetype in the effective treatment of cancer. Owing to their excellent biocompatibility, minute sizes and reactive functional surface groups, magnetic nanoparticles (MNPs) are being explored as potential drug delivery systems. In this study, MgFe₂O₄ ferrite MNPs were evaluated for their potential to augment the delivery of the anticancer drug doxorubicin (DOX). These MNPs were successfully synthesized by the glycol-thermal method and functionalized with the polymers; chitosan (CHI), polyvinyl alcohol (PVA) and polyethylene glycol (PEG), respectively, as confirmed by Fourier transform infrared (FTIR) spectroscopy. X-ray diffraction (XRD) confirmed the formation of the single-phase cubic spinel structures while vibrating sample magnetometer (VSM) analysis confirmed the superparamagnetic properties of all MNPs. Transmission electron microscopy (TEM) and nanoparticle tracking analysis (NTA) revealed small, compact structures with good colloidal stability. CHI-MNPs had the highest DOX encapsulation (84.28%), with the PVA-MNPs recording the lowest encapsulation efficiency (59.49%). The 3-(4,5-dimethylthiazol-2-yl)-2,5 diphenyl tetrazolium bromide (MTT) cytotoxicity assays conducted in the human embryonic kidney (HEK293), colorectal adenocarcinoma (Caco-2), and breast adenocarcinoma (SKBR-3) cell lines showed that all the drug-free polymerized MNPs promoted cell survival, while the DOX loaded MNPs significantly reduced cell viability in a dose-dependent manner. The DOX-CHI-MNPs possessed superior anticancer activity (<40% cell viability), with approximately 85.86% of the drug released after 72 h in a pH-responsive manner. These MNPs have shown good potential in enhancing drug delivery, thus warranting further optimizations and investigations.

Nanoparticles Based on Hydrophobic Polysaccharide Derivatives-Formation Principles, Characterization Techniques, and Biomedical Applications

Polysaccharide (PS) nanoparticles (NP) are fascinating materials that combine huge application potential with the unique beneficial features of natural biopolymers. Different types of PS-NP can be distinguished depending on the basic preparation principles (top-down vs bottom-up vs coating of nanomaterials) and the material from which they are obtained (native PS vs chemically modified PS derivatives vs nanocomposites). This review provides a comprehensive overview of an approach towards PS-NP that has gained rapidly increasing interest within the last decade; the nanoself-assembling of hydrophobic PS derivatives. This facile process is easy to perform and offers a broad structural diversity in terms of the PS backbone and the additional functionalities that can be introduced. Fundamental principles of different NP preparation techniques along with useful characterization methods are presented in this work. A comprehensive summary of PS-NP prepared by different techniques and with various PS backbones and types/amounts of hydrophobic substituents is given. The intention is to demonstrate how different parameters determine the size, size distribution, and zeta-potential of the particles. Moreover, application trends in biomedical areas are highlighted in which tailored functional PS-NP are evaluated and constantly developed further.

Novel Delivery of Mitoxantrone with Hydrophobically Modified Pullulan Nanoparticles to Inhibit Bladder Cancer Cell and the Effect of Nano-drug Size on Inhibition Efficiency

Reducing the dosage of chemotherapeutic drugs via enhancing the delivery efficiency using novel nanoparticles has great potential for cancer treatment. Here, we focused on improving mitoxantrone delivery by using cholesterol-substituted pullulan polymers (CHPs) and selected a suitable nano-drug size to inhibit the growth of bladder cancer cells. We synthesized three kinds of CHPs, named CHP-1, CHP-2, CHP-3. Their chemical structures were identified by NMR, and the degree of cholesterol substitution was 6.82%, 5.78%, and 2.74%, respectively. Their diameters were 86.4, 162.30, and 222.28 nm. We tested the release rate of mitoxantrone in phosphate-buffered saline for 48 h: the release rate was 38.73%, 42.35%, and 58.89% for the three CHPs. The hydrophobic substitution degree in the polymer was associated with the self-assembly process of the nanoparticles, which affected their size and therefore drug release rate. The release of the three drug-loaded nanoparticles was significantly accelerated in acid release media. The larger the nanoparticle, the greater the drug release velocity. At 24 h, the IC₅₀ value was 0.25 M, for the best inhibition of mitoxantrone on bladder cancer cells.3-(4,5-Dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide (MTT) experiments demonstrated that drug-loaded CHP-3 nanoparticles with the largest size were the most toxic to bladder cancer cells. Immunofluorescence and flow cytometry revealed that drug-loaded CHP-3 nanoparticles with the largest size had the strongest effect on promoting apoptosis of bladder cancer cells. Also, the three drug-loaded nanoparticles could all inhibit the migration of MB49 cells, with large-size CHP-3 nanoparticles having the most powerful inhibition.

Uptake and transport of pullulan acetate nanoparticles in the BeWo b30 placental barrier cell model

INTRODUCTION

Nanomedicine has shown a great potential in perinatal medicine because of its characteristics of sustained, controlled release and targeting ability; on the other hand, it may also lead to unexpected toxicities such as embryotoxicity and even malformation after crossing the placental barrier, but data concerning transplacental transport are scarce. Pullulan acetate (PA) nanoparticles (NPs) are a promising nanocarrier derived from natural polysaccharide; however, their transplacental transport ability and mechanism are unknown.

MATERIALS AND METHODS

In this study, fluorescein isothiocyanate (FITC) conjugated PA (PA-FITC) was synthesized. PA-FITC NPs were characterized by dynamic light scattering, transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The cytotoxicity of PA-FITC NPs at concentrations of 15, 30, 60, 125, 250, 500, 1,000 and 2,000 μg/mL was studied by cell counting kit-8. The human chorionic gonadotrophin (HCG) cytokine assay was conducted to evaluate the biological function of BeWo b30 cells. Endocytic mechanisms of PA-FITC NPs were investigated via fluorescence analysis. The monolayer properties were characterized by TEM, tight junction staining, transepithelial electrical resistance and fluorescein sodium transportation. The transport ability was measured in the cell based transwell model by confocal imaging and SEM.

RESULTS

PA-FITC NPs were almost spherical shape with a size range of 200-300 nm. Cell viability of BeWo b30 cells was up to 100% in all groups. The concentrations of HCG increased with increasing numbers of cells and culture time, which showed the good biological function of BeWo b30 cells. PA-FITC NPs were rapidly endocytosed through caveolae-mediated endocytosis and pinocytosis, with uptake inhibition rates with nystatin (NY) and colchicines (Col) of 55% and 51% respectively. BeWo b30 cell monolayer was formed over 5 days. PA-FITC NPs were found in the cytoplasm of cells on the transwell membranes; while some NPs were found in the basolateral (fetal) compartment over 24 h.

CONCLUSION

In summary, PA-FITC NPs are nontoxic, can cross the blood-placental barrier, and show mainly internalization to BeWo b30 cells through caveolae-mediated endocytosis and pinocytosis pathways, major via the former pathway. The results could benefit the adjustment and control of the transplacental transport of nanomedicines.

Curcumin loaded on pullulan acetate nanoparticles protects the liver from damage induced by DEN

Curcumin loaded nanoparticles protect liver from damage induced by DEN.

Effects of Particle Hydrophobicity, Surface Charge, Media pH Value and Complexation with Human Serum Albumin on Drug Release Behavior of Mitoxantrone-Loaded Pullulan Nanoparticles

We prepared two types of cholesterol hydrophobically modified pullulan nanoparticles (CHP) and carboxyethyl hydrophobically modified pullulan nanoparticles (CHCP) substituted with various degrees of cholesterol, including 3.11, 6.03, 6.91 and 3.46 per polymer, and named CHP-3.11, CHP-6.03, CHP-6.91 and CHCP-3.46. Dynamic laser light scattering (DLS) showed that the pullulan nanoparticles were 80-120 nm depending on the degree of cholesterol substitution. The mean size of CHCP nanoparticles was about 160 nm, with zeta potential -19.9 mV, larger than CHP because of the carboxyethyl group. A greater degree of cholesterol substitution conferred greater nanoparticle hydrophobicity. Drug-loading efficiency depended on nanoparticle hydrophobicity, that is, nanoparticles with the greatest degree of cholesterol substitution (6.91) showed the most drug encapsulation efficiency (90.2%). The amount of drug loading increased and that of drug release decreased with enhanced nanoparticle hydrophobicity. Nanoparticle surface-negative charge disturbed the amount of drug loading and drug release, for an opposite effect relative to nanoparticle hydrophobicity. The drug release in pullulan nanoparticles was higher pH 4.0 than pH 6.8 media. However, the changed drug release amount was not larger for negative-surface nanoparticles than CHP nanoparticles in the acid release media. Drug release of pullulan nanoparticles was further slowed with human serum albumin complexation and was little affected by nanoparticle hydrophobicity and surface negative charge.

Biodegradable polymeric nanoparticles for oral delivery of epirubicin: In vitro, ex vivo, and in vivo investigations

Epirubicin (EPI) is an anthracycline antineoplastic agent, commercially available for intravenous administration only and its oral ingestion continues to remain a challenge. Present investigation is aimed at the development of poly-lactic-co-glycolic acid (PLGA) nanoparticles (NPs) for oral bioavailability enhancement of epirubicin. Developed formulation revealed particle size, 235.3±15.12 nm, zeta potential, -27.5±0.7 mV and drug content (39.12±2.13 μg/mg), with spherical shape and smooth surface. Cytotoxicity studies conducted on human breast adenocarcinoma cell lines (MCF-7) confirmed the superiority of epirubicin loaded poly-lactic-co-glycolic acid nanoparticles (EPI-NPs) over free epirubicin solution (EPI-S). Further, flow cytometric analysis demonstrated improved drug uptake through EPI-NPs and elucidated the dominance of caveolae mediated endocytosis for nanoparticles uptake. Transport study accomplished on human colon adenocarcinoma cell line (Caco-2) showed 2.76 fold improvement in permeability for EPI-NPs as compared to EPI-S (p<0.001) whereas a 4.49 fold higher transport was observed on rat ileum; a 1.8 fold higher (p<0.01) in comparison to Caco-2 cell lines which confirms the significant role of Peyer's patches in absorption enhancement. Furthermore, in vivo pharmacokinetic studies also revealed 3.9 fold improvement in oral bioavailability of EPI through EPI-NPs. Henceforth, EPI-NPs is a promising approach to replace pre-existing intravenous therapy thus providing "patient care at home".

Core-shell nanoparticles based on pullulan and poly(β-amino) ester for hepatoma-targeted codelivery of gene and chemotherapy agent

This study designs a novel nanoparticle system with core-shell structure based on pullulan and poly(β-amino) ester (PBAE) for the hepatoma-targeted codelivery of gene and chemotherapy agent. Plasmid DNA expressing green fluorescent protein (pEGFP), as a model gene, was fully condensed with cationic PBAE to form the inner core of PBAE/pEGFP polycomplex. Methotrexate (MTX), as a model chemotherapy agent, was conjugated to pullulan by ester bond to synthesize polymeric prodrug of MTX-PL. MTX-PL was then adsorbed on the surface of PBAE/pEGFP polycomplex to form MTX-PL/PBAE/pEGFP nanoparticles with a classic core-shell structure. MTX-PL was also used as a hepatoma targeting moiety, because of its specific binding affinity for asialoglycoprotein receptor (ASGPR) overexpressed by human hepatoma HepG2 cells. MTX-PL/PBAE/pEGFP nanoparticles realized the efficient transfection of pEGFP in HepG2 cells and exhibited significant inhibitory effect on the cell proliferation. In HepG2 tumor-bearing nude mice, MTX-PL/PBAE/pEGFP nanoparticles were mainly distributed in the tumor after 24 h postintravenous injection. Altogether, this novel codelivery system with a strong hepatoma-targeting property achieved simultaneous delivery of gene and chemotherapy agent into tumor at both cellular and animal levels.

pH-sensitive pullulan-based nanoparticle carrier of methotrexate and combretastatin A4 for the combination therapy against hepatocellular carcinoma

This study designs a pH-sensitive nanoparticle carrier of methotrexate (MTX) and combretastatin A4 (CA4) based on pullulan for the combination therapy against hepatocellular carcinoma (HCC). Briefly, N-urocanyl pullulan (URPA) with the degree of substitution (DS) of 5.2% was synthesized and then conjugated with MTX to form MTX-URPA, in which MTX content was 17.8%. MTX-URPA nanoparticles prepared by the dialysis method had spherical shape and the mean size of 187.1 nm, and showed high affinity for HepG2 cells. CA4 was successfully loaded into MTX-URPA nanoparticles and exhibited pH-sensitive in vitro release property. After intravenous injection to PLC/PRF/5-bearing nude mice, CA4 loaded MTX-URPA (CA4/MTX-URPA) nanoparticles achieved the enhanced antitumor and anti-angiogenic effects, the prolonged circulation time in blood, and the increased distributions both in the liver and the tumor. In conclusion, this drug carrier system has significant liver-targeting property and exhibits advantages for the combination therapy against hepatocellular carcinoma.

Sustained ocular delivery of ciprofloxacin using nanospheres and conventional contact lens materials

PURPOSE

To formulate conventional contact lenses that incorporate nanosphere-encapsulated antibiotic and demonstrate that the lenses provide for sustained antibacterial activity.

METHODS

A copolymer composed of pullulan and polycaprolactone (PCL) was used to synthesize core-shell nanospheres that encapsulated ciprofloxacin. Bactericidal activity of the nanosphere-encapsulated ciprofloxacin (nanosphere/cipro) was tested by using liquid cultures of either Staphylococcus aureus or Pseudomonas aeruginosa. Nanosphere/cipro was then incorporated into HEMA-based contact lenses that were tested for growth inhibition of S. aureus or P. aeruginosa in liquid cultures inoculated daily with fresh bacteria. Lens designs included thin or thick lenses incorporating nanosphere/cipro and ciprofloxacin-HCl-soaked Acuvue lenses (Acuvue; Johnson & Johnson Vision Care, Inc., Jacksonville, FL).

RESULTS

Less than 2 μg/mL of nanosphere/cipro effectively inhibited the proliferation of cultures inoculated with 10(7) or 10(8) bacteria/mL of S. aureus and P. aeruginosa, respectively. HEMA-based contact lenses polymerized with nanosphere/cipro were transparent, effectively inhibited the proliferation of greater than 10(7)/mL of bacteria added daily over 3 days of culture, and killed up to 5 × 10(9) total microbes in a single inoculation. A thicker lens design provided additional inhibition of bacterial growth for up to 96 hours.

CONCLUSIONS

Core-shell nanospheres loaded with an antibiotic can be incorporated into a conventional, transparent contact lens and provide for sustained and effective bactericidal activity and thereby provide a new drug delivery platform for widespread use in treating ocular disorders.