Assessment of new biocompatible poly(N-(morpholino)ethyl methacrylate)-based copolymers by transfection of immortalized keratinocytes

Stimuli-Responsive Thiomorpholine Oxide-Derived Polymers with Tailored Hydrophilicity and Hemocompatible Properties

Thermo-responsive hydrophilic polymers, including those showing tuneable lower critical solution temperature (LCST), represent a continuous subject of exploration for a variety of applications, but particularly in nanomedicine. Since biological pH changes can inform the organism about the presence of disequilibrium or diseases, the development of dual LCST/pH-responsive hydrophilic polymers with biological potential is an attractive subject in polymer science. Here, we present a novel polymer featuring LCST/pH double responsiveness. The monomer ethylthiomorpholine oxide methacrylate (THOXMA) can be polymerised via the RAFT process to obtain well-defined polymers. Copolymers with hydroxyethyl methacrylate (HEMA) were prepared, which allowed the tuning of the LCST behaviour of the polymers. Both, the LCST behaviour and pH responsiveness of hydrophilic PTHOXMA were tested by following the evolution of particle size by dynamic light scattering (DLS). In weak and strong alkaline conditions, cloud points ranged between 40–60 °C, while in acidic medium no LCST was found due to the protonation of the amine of the THOX moieties. Additional cytotoxicity assays confirmed a high biocompatibility of PTHOXMA and haemolysis and aggregation assays proved that the thiomorpholine oxide-derived polymers did not cause aggregation or lysis of red blood cells. These preliminary results bode well for the use of PTHOXMA as smart material in biological applications.

Fabrication of hybrid crosslinked network with buffering capabilities and autonomous strengthening characteristics for dental adhesives

Ingress of bacteria and fluids at the interfacial gaps between the restorative composite biomaterial and the tooth structure contribute to recurrent decay and failure of the composite restoration. The inability of the material to increase the pH at the composite/tooth interface facilitates the outgrowth of bacteria. Neutralizing the microenvironment at the tooth/composite interface offers promise for reducing the damage provoked by cariogenic and aciduric bacteria. We address this problem by designing a dental adhesive composed of hybrid network to provide buffering and autonomous strengthening simultaneously. Two amino functional silanes, 2-hydroxy-3-morpholinopropyl (3-(triethoxysilyl)propyl) carbamate and 2-hydroxy-3-morpholinopropyl (3-(trimethoxysilyl)propyl) carbamate were synthesized and used as co-monomers. Combining free radical initiated polymerization (polymethacrylate-based network) and photoacid-induced sol-gel reaction (polysiloxane) results in the hybrid network formation. Resulting formulations were characterized with regard to real-time photo-polymerization, water sorption, leached species, neutralization, and mechanical properties. Results from real-time FTIR spectroscopic studies indicated that ethoxy was less reactive than methoxy substituent. The neutralization results demonstrated that the methoxy-containing adhesives have acute and delayed buffering capabilities. The mechanical properties of synthetic copolymers tested in dry conditions were improved via condensation reaction of the hydrolyzed organosilanes. The leaching from methoxy containing copolymers was significantly reduced. The sol-gel reaction provided a chronic and persistent reaction in wet condition-performance that offers potential for reducing secondary decay and increasing the functional lifetime of dental adhesives.

STATEMENT OF SIGNIFICANCE

The interfacial gaps between the restorative composite biomaterial and the tooth structure contributes to recurrent decay and failure of the composite restoration. The inability of the material to increase the pH at the composite/tooth interface facilitates the outgrowth of more cariogenic and aciduric bacteria. This paper reports a novel, synthetic resin that provides buffering capability and autonomous strengthening characteristics. In this work, two amino functional silanes were synthesized and the effect of alkoxy substitutions on the photoacid-induced sol-gel reaction was investigated. We evaluated the neutralization capability (monitoring the pH of lactic acid solution) and the autonomous strengthening property (monitoring the mechanical properties of the hybrid copolymers under wet conditions and quantitatively analyzing the leachable species by HPLC). The novel resin investigated in this study offers the potential benefits of reducing the risk of recurrent decay and prolonging the functional lifetime of dental adhesives.

Cationic nanogels as Trojan carriers for disruption of endosomes

The comparison study of interaction of linear poly(2-dimethyl amino)ethyl methacrylate and its cationic nanogels of various cross-linking with both DNA and sodium poly(styrene sulfonate) has been performed. Although all amino groups of the nanogels proved to be susceptible for protonation, their accessibility for ion pairing with the polyanions was controlled and impaired with the cross-linking. The investigation of nanogels complexes with cells in culture that was accomplished by using of calcein pH-sensitive probe revealed a successive increase in the cytoplasmic fluorescence upon the growth in the cross-linking due to calceine leakage from acidic compartments to cytosol. This regularity implies that amino groups which are buried presumably inside the nanogel are protected against the ion-pairing with polyanions of plasma membrane and hence are able to manifest buffer properties while captured into acidic endosomes, i.e. possess lyso/endosomolytic capacity. These findings suggest that network architecture makes an important contribution to proton sponge properties of weak polycations.

Compositional design and optimization of dentin adhesive with neutralization capability

OBJECTIVES

The objective of this work was to investigate the polymerization behavior, neutralization capability, and mechanical properties of dentin adhesive formulations with the addition of the tertiary amine co-monomer, 2-N-morpholinoethyl methacrylate (MEMA).

METHODS

A co-monomer mixture based on HEMA/BisGMA (45/55, w/w) was used as a control adhesive. Compared with the control formulation, the MEMA-containing adhesive formulations were characterized comprehensively with regard to water miscibility of liquid resin, water sorption and solubility of cured polymer, real-time photopolymerization kinetics, dynamic mechanical analysis (DMA), and modulated differential scanning calorimetry (MDSC). The neutralization capacity was characterized by monitoring the pH shift of 1mM lactic acid (LA) solution, in which the adhesive polymers were soaked.

RESULTS

With increasing MEMA concentrations, experimental copolymers showed higher water sorption, lower glass transition temperature and lower crosslinking density compared to the control. The pH values of LA solution gradually increased from 3.5 to about 6.0-6.5 after 90 days. With the increase in crosslinking density of the copolymers, the neutralization rate was depressed. The optimal MEMA concentration was between 20 and 40 wt%.

CONCLUSIONS

As compared to the control, the results indicated that the MEMA-functionalized copolymer showed neutralization capability. The crosslinking density of the copolymer networks influenced the neutralization rate.

Multifunctional poly(methacrylate) polyplex libraries: A platform for gene delivery inspired by nature

Polymer-based gene delivery systems have enormous potential in biomedicine, but their efficiency is often limited by poor biocompatibility. Poly(methacrylate)s (PMAs) are an interesting class of polymers which allow to explore structure-activity relationships of polymer functionalities for polyplex formation in oligonucleotide delivery. Here, we synthesized and tested a library of PMA polymers, containing functional groups contributing to the different steps of gene delivery, from oligonucleotide complexation to cellular internalization and endosomal escape. By variation of the molar ratios of the individual building blocks, the physicochemical properties of the polymers and polyplexes were fine-tuned to reduce toxicity as well as to increase activity of the polyplexes. To further enhance transfection efficiency, a cell-penetrating peptide (CPP)-like functionality was introduced on the polymeric backbone. With the ability to synthesize large libraries of polymers in parallel we also developed a workflow for a mid-to-high throughput screening, focusing first on safety parameters that are accessible by high-throughput approaches such as blood compatibility and toxicity towards host cells and only at a later stage on more laborious tests for the ability to deliver oligonucleotides. To arrive at a better understanding of the molecular basis of activity, furthermore, the effect of the presence of heparan sulfates on the surface of host cells was assessed and the mechanism of cell entry and intracellular trafficking investigated for those polymers that showed a suitable pharmacological profile. Following endocytic uptake, rapid endosomal release occurred. Interestingly, the presence of heparan sulfates on the cell surface had a negative impact on the activity of those polyplexes that were sensitive to decomplexation by heparin in solution. In summary, the screening approach identified two polymers, which form polyplexes with high stability and transfection capacity exceeding the one of poly(ethylene imine) also in the presence of serum.

Direct cytosolic delivery of polar cargo to cells by spontaneous membrane-translocating peptides

Direct cellular entry of potentially useful polar compounds into cells is prevented by the hydrophobic barrier of the membrane. Toward circumventing this barrier, we used high throughput screening to identify a family of peptides that carry membrane-impermeant cargos across synthetic membranes. Here we characterize the plasma membrane translocation of these peptides with polar cargos under a variety of conditions. The spontaneous membrane-translocating peptides (SMTPs) delivered the zwitterionic, membrane-impermeant dye tetramethylrhodamine (TAMRA) into cells even when the conditions were not permissive for endocytosis. They also delivered the larger, anionic membrane-impermeant dye Alexa Fluor 546 but did not deliver a quantum dot nanoparticle. Under all conditions, the SMTP-cargo filled the cytoplasm with a diffuse, non-punctate fluorescence that was partially excluded from the nucleus. D-amino acid peptides behaved identically in vitro, ruling out proteolysis as an important factor in the diffuse cellular distribution. Thus, cytosolic delivery of SMTP-cargo conjugates is dominated by direct membrane translocation. This is in sharp contrast to Arg9-TAMRA, a representative highly cationic, cell-penetrating peptide, which entered cells only when endocytosis was permitted. Arg9-TAMRA triggered large scale endocytosis and did not appreciably escape the endosomal compartments in the 1-h timescales we studied. When injected into mice, SMTP-TAMRA conjugates were found in many tissues even after 2 h. Unconjugated TAMRA was rapidly cleared and did not become systemically distributed. SMTPs are a platform that could improve delivery of many polar compounds to cells, in the laboratory or in the clinic, including those that would otherwise be rejected as drugs because they are membrane-impermeant.