Novel nail penetration enhancer containing vesicles "nPEVs" for treatment of onychomycosis

A comprehensive review on lipid nanocarrier systems for cancer treatment: fabrication, future prospects and clinical trials

Over the last few decades, cancer has been considered a clinical challenge, being among the leading causes of mortality all over the world. Although many treatment approaches have been developed for cancer, chemotherapy is still the most utilized in the clinical setting. However, the available chemotherapeutics-based treatments have several caveats including their lack of specificity, adverse effects as well as cancer relapse and metastasis which mainly explains the low survival rate of patients. Lipid nanoparticles (LNPs) have been utilized as promising nanocarrier systems for chemotherapeutics to overcome the challenges of the currently applied therapeutic strategies for cancer treatment. Loading chemotherapeutic agent(s) into LNPs improves drug delivery at different aspects including specific targeting of tumours, and enhancing the bioavailability of drugs at the tumour site through selective release of their payload, thus reducing their undesired side effects on healthy cells. This review article delineates an overview of the clinical challenges in many cancer treatments as well as depicts the role of LNPs in achieving optimal therapeutic outcomes. Moreover, the review contains a comprehensive description of the many LNPs categories used as nanocarriers in cancer treatment to date, as well as the potential of LNPs for future applications in other areas of medicine and research.

Development of microemulgel formulations with varied permeation enhancers for transungual delivery of luliconazole in onychomycosis management

Luliconazole-loaded microemulgels containing different permeation enhancers were formulated for transungual drug delivery for the management of onychomycosis, onychomycosis, which affects nails. The physicochemical properties like droplet size, zeta potential, pH, viscosity, spreadability, extrudability, oil binding capacity, drug content, and microscopic study were evaluated. The Pseudo-ternary phase diagram was constructed for the formulation of microemulsions (MEs) by keeping the Km ratio constant at 3:1 and characterized for clarity, mean droplet size, zeta potential, viscosity, pH, transmittance, refractive index, and stability. The ME mean droplet size and zeta potential were found in the range of 38.78 to 171.4 nm, and 0.00 to - 6.6 mV, respectively. Prepared MEs were converted into microemulgel by adding a 2.5% gelling agent (Carbapol 934) in the external phase, and a drug release study was conducted. Formulation E3 showed better drug release and was chosen as the control. Four different penetration enhancers were added separately within E3 and further evaluated for pH, viscosity, spreadability, extrudability, oil binding capacity, drug content, microscopic study, Compatibility study, XRD, and DSC. A favorable docking score was observed between luliconazole and Lanosterol 14-alpha-demethylase. In-vitro cumulative drug release at the end of 24 h from E3-SS, containing sodium sulfide as a penetration enhancer, was found to be 94.70% and was 2 times more than the control formulation. Ex-vivo transungual permeation studies through cutting nail clippings were found to be in the range of 28.18 - 36.52 µg/mm2. The microemulgels tagged as E3, E3-SS, and E3-SL showed a significant zone of inhibition against Candida albicans and Aspergillus fumigatus as compared to the marketed formulation.

Rose bengal-encapsulated chitosan nanoparticles for the photodynamic treatment of Trichophyton species

Rose bengal (RB) solutions coupled with a green laser have proven to be efficient in clearing resilient nail infections caused by Trichophyton rubrum in a human pilot study and in extensive in vitro experiments. Nonetheless, the RB solution can become diluted or dispersed over the tissue and prevented from penetrating the nail plate to reach the subungual area where fungal infection proliferates. Nanoparticles carrying RB can mitigate the problem of dilution and are reported to effectively penetrate through the nail. For this reason, we have synthesized RB-encapsulated chitosan nanoparticles with a peak distribution size of ~200 nm and high reactive oxygen species (ROS) production. The RB-encapsulated chitosan nanoparticles aPDT were shown to kill more than 99% of T. rubrum, T. mentagrophytes, and T. interdigitale spores, which are the common clinically relevant pathogens in onychomycosis. These nanoparticles are not cytotoxic against human fibroblasts, which promotes their safe application in clinical translation.

Contemporary Techniques and Potential Transungual Drug Delivery Nanosystems for The Treatment of Onychomycosis

The humanoid nail is considered an exceptional protective barrier that is formed mainly from keratin. Onychomycosis is the cause of 50% of nail infections that is generally caused by dermatophytes. Firstly, the infection was regarded as a cosmetic problem but because of the tenacious nature of onychomycosis and its relapses, these infections have attracted medical attention. The first line of therapy was the oral antifungal agents which were proven to be effective; nevertheless, they exhibited hepato-toxic side effects, alongside drug interactions. Following, the opportunity was shifted to the topical remedies, as onychomycosis is rather superficial, yet this route is hindered by the keratinized layers in the nail plate. A potential alternative to overcome the obstacle was applying different mechanical, physical, and chemical methods to boost the penetration of drugs through the nail plate. Unfortunately, these methods might be expensive, require an expert to be completed, or even be followed by pain or more serious side effects. Furthermore, topical formulations such as nail lacquers and patches do not provide enough sustaining effects. Recently, newer therapies such as nanovesicles, nanoparticles, and nanoemulsions have emerged for the treatment of onychomycosis that provided effective treatment with possibly no side effects. This review states the treatment strategies such as mechanical, physical, and chemical methods, and highlights various innovative dosage forms and nanosystems developed in the last 10 years with a focus on advanced findings regarding formulation systems. Furthermore, it demonstrates the natural bioactives and their formulation as nanosystems, and the most relevant clinical outcomes.

Therapeutic treatment strategies for the management of onychomycosis: a patent perspective

INTRODUCTION

Onychomycosis, a multifactorial fungal infection of the nails, shows a global prevalence of about 5.5% and is responsible for 50% of all nail infections. To develop effective management strategies, it is necessary to understand the etiology, pathophysiology, and risk factors of onychomycosis. Oral route of drug delivery is one of the routes utilized to deliver anti-fungal agents, but, has its own limitations like longer duration of treatment, increased adverse effects, and potential for drug interaction. The ungual route has received greater attention due to its localized, non- invasive action and improved patient compliance.

AREAS COVERED

This review comprehensively discusses conventional onychomycosis therapies and patented novel drug delivery systems for the management of onychomycosis including chemical permeation enhancers, non-particulate drug delivery systems, penetration enhancing devices etc., Databases such as PubMed, ResearchGate, and Google Patents were searched by using the keywords onychomycosis and trans-ungual drug delivery.

EXPERT OPINION

Enormous research has been conducted and is still ongoing to find the best possible novel drug delivery system for onychomycosis management. Approaches like incorporation of herbal constituents in nano-formulations, inkjet printing, laser devices, iontophoretic techniques, etc. can be employed to make safe and effective drug delivery systems which are regulatory compliant.

Linalool-Incorporated Synergistically Engineered Modified Liposomal Nanocarriers for Enhanced Transungual Delivery of Terbinafine against Onychomycosis

This work investigates the synthesis of linalool-containing invasomes for terbinafine (TBF-IN) in order to increase the solubility, bioavailability, and nail permeability of terbinafine (TBF) for transungual administration. TBF-IN was created utilising the thin-film hydration technique, and with the Box-Behnken design (BBD), optimisation was carried out. TBF-INopt were investigated for vesicle size, zeta potential, PDI (Polydispersity index), entrapment efficiency (EE) and in vitro TBF release. In addition, nail permeation analysis, TEM (transmission electron microscopy), and CLSM (confocal scanning laser microscopy) were performed for further evaluation. The TBF-INopt exhibited spherical as well as sealed vesicles with a considerably small size of 146.3 nm, an EE of 74.23 per cent, a PDI of 0.1612, and an in vitro release of 85.32 per cent. The CLSM investigation revealed that the new formulation had better TBF nail penetration than the TBF suspension gel. The antifungal investigation demonstrated that the TBF-IN gel has superior antifungal activity against Trichophyton rubrum and Candida albicans compared to the commercially available terbinafine gel. In addition, an investigation of skin irritation using Wistar albino rats indicates that the TBF-IN formulation is safe for topical treatment. This study confirmed that the invasomal vesicle formulation is an effective vehicle for the transungual delivery of TBF for the treatment of onychomycosis.

Strategies for the enhancement of nail plate permeation of drugs to treat onychomycosis

Onychomycosis is caused by dermatophytes, non-dermatophytes and yeasts. It has a global prevalence of 5.5%, requires long treatment periods, and has high relapse rates following therapy. Oral antifungals are generally the most common treatment. While effective, they have limitations such as drug-drug interactions, hepatotoxicity and adverse side effects; thus, they cannot be used in several populations. Topical antifungals do not have the safety limitations but are typically not as effective. The primary challenge of topical treatment is the permeation of drug molecules across the nail plate barrier, which is a highly cross-linked keratin network. The use of drugs and formulations with favourable characteristics such as small size, absence of lipophilicity, hydrophilic nature, hydrating properties and appropriate pH can greatly improve permeation. Here, we review physical, nanoparticle-based, formulation-based, mechanical and chemical drug delivery strategies to improve the permeation of drugs across the nail plate.

Pharmaceutical based cosmetic serums

The growth and demand for cosmeceuticals (cosmetic products that have medicinal or drug-like benefits) have been enhanced for the last few decades. Lately, the newly invented dosage form, i.e., the pharmaceutical-based cosmetic serum has been developed and widely employed in various non-invasive cosmetic procedures. Many pharmaceutical-based cosmetic serums contain natural active components that claim to have a medical or drug-like effect on the skin, hair, and nails, including anti-aging, anti-wrinkle, anti-acne, hydrating, moisturizing, repairing, brightening and lightening skin, anti-hair fall, anti-fungal, and nail growth effect, etc. In comparison with other pharmaceutical-related cosmetic products (creams, gels, foams, and lotions, etc.), pharmaceutical-based cosmetic serums produce more rapid and incredible effects on the skin. This chapter provides detailed knowledge about the different marketed pharmaceutical-based cosmetic serums and their several types such as facial serums, hair serums, nail serums, under the eye serum, lip serum, hand, and foot serum, respectively. Moreover, some valuable procedures have also been discussed which provide prolong effects with desired results in the minimum duration of time after the few sessions of the serum treatment.

Hydroxypropyl chitosan nail lacquer of ciclopirox-PLGA nanocapsules for augmented in vitro nail plate absorption and onychomycosis treatment

Onychomycosis accounts for 90% of nail infections worldwide. Topical therapy provides localized effects with minimal adverse systemic actions, yet its effectiveness is limited by minimal drug permeation through the keratinized nail plate. Ciclopirox (CIX) is a FDA-approved broad-spectrum antimycotic agent. However, the complete cure with its nail lacquer (8% w/v) may continue for one year with a high cost. Therefore, poly lactide-co-glycolide (PLGA) nanocapsules (NCs) of CIX were prepared by nanoprecipitation and optimized through a 2³ factorial design to be incorporated into hydroxypropyl chitosan (HPCH) based nail lacquer. Nail hydration, in vitro nail absorption, minimum inhibitory concentration (MIC), inhibition zones and ex vivo fungal growth on nail fragments were evaluated. The optimized NCs of CIX based on 100 mg PLGA 2 A and lipoid S75 showed a mean diameter of 174.77 ± 7.90 nm, entrapment efficiency (EE%) of 90.57 ± 0.98%, zeta potential (ZP) of -52.27 ± 0.40 mV and a prolonged drug release. Nail lacquer of the optimized NCs exhibited a higher stability than NCs dispersion. Compared to CIX solution (1% w/v), the respective decrease in MIC for NCs and their lacquer was four- and eight-fold. The lacquer superiority was confirmed by the enhancement in the nail hydration and absorption by 4 and 2.60 times, respectively, relative to CIX solution and the minimal ex vivo fungal growth. Therefore, HPCH nail lacquer of (1% w/v) CIX-PLGA-NCs can be represented as a potential topical delivery system for enhanced in vitro nail absorption and therapeutic efficacy against onychomycosis at a low dose.

Chitosan Nanoparticles Loaded Poloxamer 407 Gel for Transungual Delivery of Terbinafine HCl

The current study aimed to develop chitosan nanoparticles (CSNP) loaded poloxamer 407 (P407) gel formulation for transungual delivery of terbinafine HCl (TBN). TBN-CSNP were prepared by nanoprecipitation method and optimized by face-centered central composite design (FCCCD). Optimized TBN-CSNP formulation exhibited a spherical shape with hydrodynamic diameter; zeta potential and entrapment efficiency (EE) of 229 ± 5 nm; 37 ± 1.5 mV; and 75 ± 2% respectively. The solid state of TBN and its compatibility with formulation ingredients were confirmed through XRD and FTIR analysis respectively. TBN-CSNP loaded P407 gel exhibited pseudoplastic rheological behavior having a spreadability of 11 ± 2 g·cm/s. The washability study showed that 40 ± 2% of the gel was eroded after washing 12 times. Drug release from TBN-CSNP- and TBN-CSNP-loaded gel was 84 ± 5% and 57 ± 3%, respectively. The cumulative quantity of TBN permeated from TBN-CSNP-loaded P407 gel and TBN-loaded P407 gel was 25 ± 8 and 27 ± 4 µg/cm2, respectively. The nail uptake study showed that 3.6 ± 0.7 and 2.1 ± 0.3 µg of rhodamine was uptaken by the nail following 2 h topical application of TBN-CSNP loaded P407 gel and TBN loaded P407 gel, respectively. Hence, the developed CSNP-based P407 gel formulation can be a potential carrier for transungual delivery of TBN to topically treat onychomycosis.

Antifungal Nail Lacquer for Enhanced Transungual Delivery of Econazole Nitrate

The fungal disease of the nail, onychomycosis, which is also the most prevalent nail disturbance, demands effective topical treatment options considering the possible adverse effects of systemic antifungal therapy. The current work is focused on development of an adhesive and resistant, drug-delivering and permeation-enhancing polymeric film containing econazole nitrate (ECN) for topical antifungal treatment. The development of the lacquer formulation was guided by the Quality by Design approach to achieve the critical quality attributes needed to obtain the product of desired quality. Eudragit RSPO at 10% w/w was found to be the ideal adhesive polymer for the application and an optimal permeation-enhancing lacquer formulation was achieved by the optimization of other formulation excipients, such as plasticizer and the solvent system. Additionally, novel experimental enhancements introduced to the research included refined D₅₀ drying time and drying rate tests for lacquer characterization as well as a multi-mechanism permeation-enhancing pre-treatment. Moreover, a practical implication was provided by a handwashing simulation designed to test the performance of the lacquer during actual use. In vitro drug release testing and ex vivo nail permeation testing demonstrated that the optimized nail lacquer performed better than control lacquer lacking the permeation enhancer by achieving a faster and sustained delivery of ECN. It can be concluded that this is a promising drug delivery system for topical antifungal treatment of onychomycotic nails, and the novel characterization techniques may be adapted for similar formulations in the future.

Response surface methodological approach for optimization of photodynamic therapy of onychomycosis using chlorin e6 loaded nail penetration enhancer vesicles

Antimicrobial photodynamic inactivation (aPDI) has a tremendous potential as an alternative therapeutic modality to conventional antifungals in treatment of onychomycosis, yet the nail barrier properties and the deep-seated nature of fungi within the nails remain challenging. Therefore, the aim of this study was to prepare, optimize, and characterize Chorin e6 (Ce6) nail penetration enhancer containing vesicles (Ce6-nPEVs) and evaluate their photodynamic mediated effect against Trichophyton rubrum (T.rubrum); the main causative agent of onychomycosis. Optimization of the particle size and encapsulation efficiency of nPEVs was performed using a four-factor two-level full factorial design. The transungual delivery potential of the selected formulation was assessed in comparison with the free drug. The photodynamic treatment conditions for T.rubrum aPDI by free Ce6 was optimized using response surface methodology based on Box-Behnken design, and the aPDI effect of the selected Ce6-nPEVs was evaluated versus the free Ce6 at the optimized condition. Results showed that formulations exhibited high encapsulation efficiency for Ce6 ranging from 79.4 to 98%, particle sizes ranging from 225 to 859 nm, positive zeta potential values ranging from +30 to +70 mV, and viscosity ranging from 1.26 to 3.43 cP. The predominant parameters for maximizing the encapsulation efficiency and minimizing the particle size of Ce6-nPEVs were identified. The selected formulation showed 1.8-folds higher nail hydration and 2.3 folds improvement in percentage of Ce6 up-taken by nails compared to the free drug. Results of the microbiological study confirmed the reliability and adequacy of the Box-Behnken model, and delineated Ce6 concentration and incubation time as the significant model terms. Free Ce6 and Ce6-nPEVs showed an equipotent in vitro fungicidal effect on T.rubrum at the optimized conditions, however Ce6-nPEVs is expected to show a differential effect at the in vivo level where the advantage of the enhanced nail penetration feature will be demonstrated.

In Silico Drug Screening Based Development of Novel Formulations for Onychomycosis Management

Onychomycosis is a prominent fungal infection that causes discoloration, thickening, and mutilation leading to the separation of the nail from the nail bed. Treatment modalities for onychomycosis may include oral, topical, or combination therapy with antifungals and at times may require chemical or surgical intervention. The burden of side effects of antifungals is enormous, and therefore using molecular docking-based drug selection in context with the target keratin protein would ensure better disease management. Ciclopirox, Amorolfine HCl, Efinaconazole, Tioconazole, and Tavaborole were submitted for assessment, revealing that Amorolfine HCl is the best fit. Consequently, two formulations (Nail lacquer and nanoemulgel) were developed from Amorolfine HCl to validate the in silico screening outcomes. The formulations were further fortified with over-the-counter ingredients vis-a-vis with vitamin E in nail lacquer and undecylenic acid in nanoemulgel for their prominent roles in improving nail health. Both the formulations were systematically designed, optimized, and characterized. Amorolfine HCl containing nanoemulgel (NEG) was developed using undecylenic acid as an oil phase and thioglycolic acid as a penetration enhancer. The quality parameters evaluated were particle size, the zeta potential for nanoemulsion (NE) (78.04 ± 4.724 nm and −0.7mV, respectively), in vitro cumulative drug release (96.74% for NE and 88.54% for NEG), and transungual permeation (about 73.49% for NEG and 54.81% for NE). Nail lacquer was evaluated for the drying time, non-volatile content, and blush test. In vitro cumulative drug release of the developed nail lacquer and comparator marketed formulations were around 81.5% and 75%, respectively. Similarly, the transungual drug permeation was 6.32 μg/cm² and 5.89 μg/cm², respectively, in 24 h. The in silico guided preparation of both formulations containing Amorolfine HCl and over the counter ingredients is amenable for therapeutic use against onychomycosis and will be evaluated in the in vivo model.

Insightful exploring of advanced nanocarriers for the topical/transdermal treatment of skin diseases

Dermatological products constitute a big segment of the pharmaceutical market. From conventional products to more advanced ones, a wide variety of dosage forms have been developed till current date. A representative of the advanced delivery means is carrier-based systems, which can load large number of drugs for treatment of dermatological diseases, or simply for cosmeceutical purposes. To make them more favorable for topical delivery, further incorporation of these carriers in a topical vehicle, such as gels or creams is made. Therefore in this review article, an overview is compiled of the most commonly encountered novel carrier based topical delivery systems; namely lipid based (nanoemulsions, microemulsions, solid lipid nanoparticles [SLNs] and nanostructured lipid carriers [NLCs]), and vesicular carriers (non-deformable, such as liposomes, niosomes, emulsomes and cerosomes, and deformable, such as transfersomes, ethosomes, transethosomes, and penetration enhancer vesicles), with special emphasis on those loaded in a secondary gel vehicle. A special focus was made on the commonly encountered dermatological diseases, such as bacterial and fungal infections, psoriasis, dermatitis, eczema, vitiligo, oxidative damage, aging, alopecia, and skin cancer.

Poloxamer 407 Based Gel Formulations for Transungual Delivery of Hydrophobic Drugs: Selection and Optimization of Potential Additives

The current study aimed to develop poloxamer 407 (P407) gel for transungual delivery of antifungal hydrophobic drugs with sufficient gel strength and drug loading. Gel strength and drug loading of P407 gel was improved by use of functional additives. Hydration enhancement effect was used to select optimum nail penetration enhancer. Face-centered central composite design (FCCCD) was used to observe the effect of the selected penetration enhancer (thioglycolic acid (TGA)) and cosolvent (ethanol) on gelation behavior to develop formulation with enough loading of hydrophobic drug, i.e., terbinafine HCl (TBN), and its permeation across the nail plate without compromising on gel strength. It was observed that increasing concentration of P407 and TGA significantly reduced gelation temperature and enhanced the gel strength of P407 gel and can be used to improve P407 gel strength. Under the scanning electron microscope, the significant effect of TGA as an ungual penetration enhancer was observed on the morphology of the nail plate. Optimized P407 gel prepared with modified cold method showed a gelation temperature of 8.7 ± 0.16 °C, gel strength of 122 ± 7.5 s and drug loading of 1.2% w/w, which was four times more than the drug loading in the gels prepared with conventional cold method. Rheological behavior was pseudoplastic with 47.75 ± 3.48% of gel erosion after 12 washings and 67.21 ± 2.16% of drug release after 12 h. A cumulative amount of TBN permeated from P407 gel with and without PE after 24 h was 27.30 ± 4.18 and 16.69 ± 2.31 µg/cm², respectively. Thioglycolic acid can be used as a nail penetration enhancer without the chemical modification or addition of extra additives while retaining the gel strength. Water miscible cosolvents with moderate evaporability such as ethanol, can be incorporated to P407 gel by minor modification in method of preparation to load the required dose of hydrophobic drugs. Developed P407 gel formulation with sufficient gel strength and drug loading will be a promising carrier for transungual delivery of hydrophobic antifungal agents.

Enhancement of Skin Delivery of Drugs Using Proposome Depends on Drug Lipophilicity

The study aims to investigate the propylene glycol-based liposomes named 'proposomes' in enhancing skin permeation of drugs with different physicochemical properties. Ibuprofen, tofacitinib citrate, rhodamine B, and lidocaine were loaded into proposomes. These drug formulations were analyzed for particle size, zeta potential, polydispersity index, entrapment efficiency, and in vitro skin permeation. The confocal laser scanning microscopy was performed on skin treated with calcein and rhodamine B laden proposomes. The transdermal delivery relative to physicochemical properties of drugs such as logP, melting point, molecular weight, solubility, etc., were analyzed. We tested the safety of the proposomes using reconstructed human skin tissue equivalents, which were fabricated in-house. We also used human cadaver skin samples as a control. The proposomes had an average diameter of 128 to 148 nm. The drug's entrapment efficiencies were in the range of 42.9-52.7%, translating into the significant enhancement of drug permeation through the skin. The enhancement ratio was 1.4 to 4.0, and linearly correlated to logP, molecular weight, and melting point. Confocal imaging also showed higher skin permeation of calcein and rhodamine B in proposome than in solution. The proposome was found safe for skin application. The enhancement of skin delivery of drugs through proposomes was dependent on the lipophilicity of the drug. The entrapment efficiency was positively correlated with logP of the drug, which led to high drug absorption.

Application of central composite design for the optimization of itraconazole loaded nail lacquer formulation

Onychomycosis is a common fungal infection of the nails that mostly affects the elderly and athletes. Antifungal drug-like itraconazole is one of the therapeutic agents of choice for the topical treatment of onychomycosis. The current work aimed for the preparation and optimization of itraconazole-loaded nail lacquer formulation. Central composite design was employed; independent variables were polymer concentration (X₁) and thioglycolic acid (TGA) concentration (X₂). While the dependent variables were cumulative amount of drug permeated per unit area (CADP/A, Y₁), drying time (Y₂) and nonvolatile content (Y₃). The optimized formulation was characterized for various parameters including ex-vivo permeation study, confocal laser scanning microscopy (CLSM) and antifungal study. The optimized nail lacquer formulation (F7) exhibited CADP/A of 198.23 µg/cm², drying time of 185 s and nonvolatile content of 97.23%. The scanning electron microscopy of goat hoof treated with optimized nail lacquer formulation demonstrated loosening of the structure and marked increase in surface roughness. The CLSM micrograph of goat hoof treated with optimized nail lacquer formulation demonstrated that the probe dye was eventually distributed and penetrated through the hoof. Bio-adhesiveness analysis showed that the prepared nail lacquer film has ample adhesiveness to be maintained on the nail plate surface for a sufficient time. In antifungal study, the optimized nail lacquer, and marketed gel exhibited a zone inhibition of 21 mm, and 10 mm against Candida albicans, respectively. The stability study showed that the optimized nail lacquer is stable at storage condition. The prepared nail lacquers have been shown to serve as a useful dosage form for the delivery of itraconazole across nail plate for controlling the problems associated with onychomycosis.

Coenzyme Q10 phospholipidic vesicular formulations for treatment of androgenic alopecia: ex vivo permeation and clinical appraisal

INTRODUCTION

Coenzyme Q10 (CoQ10) is an antioxidant molecule with anti-aging activity on human hair, and because of its pharmaceutical limitations such as large molecular weight, high lipophilicity and poor water solubility, its therapeutic effectiveness has been hampered. Therefore, different vesicular nanocarriers were developed in the current work, for enhancement of the skin penetration of CoQ10 for treatment of androgenic alopecia.

AREAS COVERED

In order to overcome the poor skin penetration of CoQ10, it was formulated in liposomes, transfersomes, ethosomes, cerosomes and transethosomes using the thin-film hydration method. Results revealed that transethosomes were the carrier of choice for CoQ10, in which it displayed a particle size of 146 nm, zeta potential -55 mV and entrapment efficiency of 97.63%. Transethosomes also achieved the highest deposition percentage for CoQ10, exceeding 95% in the different skin layers. Upon clinical examination in patients suffering from androgenic alopecia, CoQ10 transethosomes displayed better clinical response than the administration of CoQ10 solution, which was further confirmed by dermoscopic examination.

EXPERT OPINION

Findings of this study further prove that loading antioxidants such as CoQ10 in nanocarriers maximizes their therapeutic efficiency, and opens many opportunities for their application in treatment of several other topical diseases.

Comparative efficacy evaluation of different penetration enhancement strategies for dermal delivery of poorly soluble drugs - A case with sertaconazole nitrate

The aim of this study was to compare the efficacy of different approaches for enhancement of dermal availability of the highly lipophilic antifungal model drug - sertaconazole nitrate (SN). For this purpose, a physical penetration enhancer - dissolving microneedles (MNs) was fabricated by filling moulds with liquid formulation based on polyvinylpyrrolidone and loaded with SN. Dissolving MNs were characterised regarding their morphological and mechanical characteristics. A penetration enhancement efficacy of MNs was evaluated in vitro using porcine ear skin in parallel with the efficacy of formerly developed chemical penetration enhancer - biocompatible microemulsion (ME) formulation. Moreover, an ability of solid silicon MNs to significantly improve delivery of SN from ME into the skin has also been investigated. The obtained results showed that dissolving MNs had satisfying morphological properties and mechanical strength. This type of MNs provided comparable drug deposition in the skin as ME formulation, but also revealed an indication of percutaneous absorption of a portion of the administered drug dose. However, the penetration/permeation study results were largely influenced by experimental setup and dosing regimen. Although solid silicon MNs assisted SN dermal delivery led to increase of drug cutaneous retention (1.9-fold) under infinite dosing regimen, the synergistic action of solid MNs and ME applied under finite dosing was more pronounced in comparison with the application either of physical (dissolving MNs) or chemical enhancer (ME) alone. Namely, SN amount accumulated into the skin increased up to 4.67 and 4.37 folds in comparison with ME and dissolving MNs alone, respectively, while reaching a significant decrease in drug permeation through the skin compared to the use of dissolving MNs. Application of ME per se was the only approach that provided selective in vitro dermal drug delivery without SN permeation across the skin. However, despite both types of the used MNs lead to SN permeation in vitro, the ratio between the drug amount deposited in the skin and SN content permeated was significantly higher for the combined approach (12.05) than for dissolving MNs (2.10). Therefore, a combination of solid silicon MNs and biocompatible ME favoured more pronouncedly SN skin accumulation, which is preferable in the treatment of skin fungal infections.

Nanotechnological Innovations Enhancing the Topical Therapeutic Efficacy of Quercetin: A Succinct Review

Nanotechnology is currently a hot topic in dermatology and nutraceutical/cosmeceutical delivery, owing to the advantages it provides in terms of enhancing the skin permeation of drugs, as well as increasing their therapeutic efficacy in the treatment of different dermatological diseases. There is also a great interest in the topical delivery of nutraceuticals; which are natural compounds with both therapeutic and cosmetic benefits, in order to overcome the side effects of topically applied chemical drugs. Quercetin is a key nutraceutical with topical antioxidant and anti-inflammatory properties which was reported to be effective in the treatment of different dermatological diseases, however, its topical therapeutic activity is hindered by its poor skin penetration. This review highlights the topical applications of quercetin, and summarizes the nanocarrier-based solutions to its percutaneous delivery challenges.

Preparation of Topical Itraconazole with Enhanced Skin/Nail Permeability and In Vivo Antifungal Efficacy against Superficial Mycosis

In this study, a stable and highly skin-permeable topical delivery system for itraconazole (ITZ) was designed to provide effective treatment against superficial mycosis. Herein, ITZ was incorporated into a solution composed of ethanol, benzyl alcohol, hydrochloric acid, Transcutol P, and cyclomethicone as a delivery vehicle, solubilizer, protonating agent, permeation enhancer, and spreading agent, respectively. At 72 h, the optimal topical ITZ formulation (ITZ–TF#11) exhibited 135% enhanced skin permeability, which led to increases in drug deposition in the stratum corneum, epidermis, and dermis of 479%, 739%, and 2024%, respectively, compared with the deposition of 1% ITZ in ethanol (control). Moreover, on day 7, ITZ–TF#11 demonstrated 2.09- and 2.30-fold enhanced nail flux and drug deposition, compared with the control. At a dose of 40 mg/kg/day, ITZ–TF#11 showed 323% greater lesion recovery, a 165% lower mean erythema severity score, and a 37% lower mean logarithm of viable fungal cells in skin in the treated area, compared with mice that received oral ITZ at the same dose. Overall, the findings imply that ITZ–TF#11 is a superior alternative to oral ITZ for treatment of superficial mycosis.

Enhanced nail delivery of voriconazole-loaded nanomicelles by thioglycolic acid pretreatment: A study of protein dynamics and disulfide bond rupture

This work aimed to select an effective penetration enhancer (PE) for nail pretreatment, develop voriconazole (VOR)-loaded nanomicelles, and evaluate their ability to deliver VOR to the nail. A complete analysis of nail protein dynamics, bond rupture, and microstructure was performed. Alternative methods as electron paramagnetic resonance (EPR) and the Ellman's reagent (DTNB) assay were also evaluated. Nanomicelles were produced and characterized. The PE hydrated the hooves, following the order: urea ≈ cysteine ≈ glycolic acid < thioglycolic acid (TGA) < NaOH. SEM images and methylene blue assay showed enlarged pores and roughness of porcine hooves after incubation with NaOH and TGA. EPR was demonstrated to be the most sensitive technique. DTNB assay quantified higher thiol groups for samples treated with TGA (p < 0.05). A stratigraphic analysis with Raman spectroscopy demonstrated that hooves treated with TGA presented a higher SH/SS ratio at the edges, affecting protein secondary structure. In vitro permeation studies demonstrated significant VOR permeation (29.44 ± 6.13 µg/cm²), 10-fold higher than previous studies with lipid nanoparticles. After TGA pretreatment, VOR permeation was further enhanced (3-fold). TGA pretreatment followed by VOR-loaded nanomicelles demonstrates a promising approach for onychomycosis treatment. The novel methods for protein analysis were straightforward and helpful.

Effect of Different Nail Penetration Enhancers in Solid Lipid Nanoparticles Containing Terbinafine Hydrochloride for Treatment of Onychomycosis

Onychomycosis is considered a stubborn nail fungal infection that does not respond to conventional topical antifungal treatments. This study aimed to develop and characterize novel solid lipid nanoparticles (SLNs) formulae containing terbinafine HCl (TFH) and loaded with different nail penetration enhancers (nPEs). Three (nPEs) N-acetyl-L-cysteine, thioglycolic acid, and thiourea were used. Characterization of the prepared formulae was done regarding particle size, zeta potential, polydispersity index (PDI), entrapment efficiency (EE%), physical stability, in vitro release study, infrared (FT-IR), and their morphological structures. The selected formulae and the marketed cream Lamifen® were compared in terms of their antifungal activity against Trichophyton rubrum as well as their nail hydration and their drug uptake by the nail clippers. Thiourea was the nPE of choice; formulae (N2 and N8), with thiourea, were considered the optimum TFH SLNs containing nPEs. They were selected for their optimum particle size of 426.3 ± 10.18 and 450.8 ± 11.45 nm as well as their highest EE% of 89.76 ± 1.25 and 90.35 ± 1.33, respectively. The in vitro microbiological screening of the antifungal activity of these two formulae showed significantly larger zones of inhibition in comparison with the marketed product. The ex vivo screening of the drug uptake of the two selected formulae was significantly higher than that of the marketed product. The nPE formulae present a very promising option as they showed optimum physicochemical characterization with high antifungal activity and high drug uptake as well as good nail hydration effect.

Factors affecting the morphology of some organic and inorganic nanostructures for drug delivery: characterization, modifications, and toxicological perspectives

Introduction: In this review, we aim to highlight the impact of various processes and formulation variables influencing the characteristics of certain surfactant-based nanoconstructs for drug delivery. Areas covered: The review includes the discussion on processing parameters for the preparation of nanoconstructs, especially those made up of surfactants. Articles published in last 15 years (437) were reviewed, 381 articles were selected for data review and most appropriate articles (215) were included in article. Effect of variables such as surfactant concentration and type, membrane additives, temperature, and pH-dependent transitions on morphology has been highlighted along with effect of shape on nanoparticle uptake by cells. Various characterization techniques explored for these nanostructures with respect to size, morphology, lamellarity, distribution, etc., and a separate section on polymeric vesicles and the influence of block copolymers, type of block copolymer, control of block length, interaction of multiple block copolymers on the structure of polymersomes and chimeric nanostructures have been discussed. Finally, applications, modification, degradation, and toxicological aspects of these drug delivery systems have been highlighted. Expert opinion: Parameters influencing the morphology of micelles and vesicles can directly or indirectly affect the efficacy of small molecule cellular internalization as well as uptake in the case of biologicals.[Figure: see text].

Nanovesicular Photodynamic Clinical Treatment of Resistant Plantar Warts

Background:

Photodynamic therapy which involves the use of photosensitizer molecule activated by a light source was proven very promising for the treatment of dermatological diseases, especially the resistant ones such as recalcitrant Plantar Warts (PW).

Objective:

However, its efficacy is hindered by the poor permeation of the photosensitizer molecule required to initiate skin photo-induced effects.

Methods:

In this manuscript, the efficiency of the nano-vesicular system (transfersomes) as a potential topical drug delivery system for the photosensitizer methylene blue (MB) was investigated following clinical Photodynamic Therapy (PDT) in patients suffering from PW.

Results:

Results revealed that MB transfersomal gel displayed a higher complete healing percentage for the lesions compared to the free MB gel (86.67% versus 53.57%) achieved at a lower number of treatment sessions (2.2 versus 4.14). Patients reported no signs of pain or inflammation, with no recurrence of the lesions during the follow up period of 8 months.

Conclusion:

PDT using transfersomal MB is an effective and safe therapeutic modality for the treatment of PW.

Intra-articular multifunctional celecoxib loaded hyaluronan nanocapsules for the suppression of inflammation in an osteoarthritic rat model

Direct intra-articular delivery of drugs to osteoarthritic joints offers the possibility of delivering high drug concentrations at the site of action as well as decreasing long term associated side effects after oral drug delivery. So in the current work, we aimed to improve the osteoarthritic therapeutic efficacy of the non-steroidal anti-inflammatory drug; celecoxib, through the formulation of drug loaded hyaluronan nanocapsules. The proposed formulation aimed to combine the beneficial viscosupplemental properties of hyaluronic acid with the pharmacological, anti-inflammatory, effect of celecoxib in a novel drug carrier for intra-articular delivery. The proposed nanocapsules were prepared by the nanoprecipitation method. Several formulation variables were studied aiming at optimizing the nanocapsules' size, polydispersity index and celecoxib entrapment efficiency %. The optimized hyaluronan nanocapsules formulation showed a size of 254.9 ± 3.06 nm, which is appropriate for the intra-articular delivery of celecoxib, high entrapment efficiency% of 97.98% ± 0.19, and prolonged celecoxib release for almost one week. The transmission electron microscope images revealed spherical shape of the nanocapsules with distinct shell and core structure. The in-vivo evaluation of the anti-osteoarthritic activity of the optimized hyaluronan nanocapsules formulation showed the superiority of the prepared celecoxib nanocapsules compared to celecoxib suspension in a Monoiodoacetate induced osteoarthritic rat model, regarding histological, swelling and immunohistochemical parameters of osteoarthritis.

Treatment and management strategies of onychomycosis

Onychomycosis is one of the most prevalent and severe nail fungal infections, which is affecting a wide population across the globe. It leads to variations like nail thickening, disintegration and hardening. Oral and topical drug delivery systems are the most desirable in treating onychomycosis, but the efficacy of the results is low, resulting in a relapse rate of 25-30%. Due to systemic toxicity and various other disadvantages associated with oral therapy like gastrointestinal, hepatotoxicity, topical therapy is commonly used. Topical therapy improves patient compliance and reduces the cost of treatment. However, due to poor penetration of topical therapy across the nail plate, research is focused on different chemical, mechanical and physical methods to improve drug delivery. Penetration enhancers like Thioglycolic acid, Hydroxypropyl-β-cyclodextrin (HP-β-CD), Sodium lauryl sulfate (SLS), carbocysteine, N-acetylcysteine etc. have shown results enhancing the drug penetration across the nail plate. Results with physical techniques such as iontophoresis, laser and Photodynamic therapy are quite promising, but the long-term suitability of these devices is in need to be determined. In this article, a brief analysis of the treatment procedures, factors affecting drug permeation across nail plate, chemical, mechanical and physical devices used to increase the drug delivery through nails for the onychomycosis management has been achieved.

Cosm-nutraceutical nanovesicles for acne treatment: Physicochemical characterization and exploratory clinical experimentation

The full exploration of the 'nutraceuticals' therapeutic potential in cosmetics has been hindered by their poor stratum corneum permeation. Therefore, the aim of the present study was to formulate a nutraceutical; quercetin, in novel vitamin C based nanovesicles (aspasomes), and to explore their beneficial effects in the treatment of acne. Aspasomes were characterized for their particle size, zeta potential, entrapment efficiency (EE%), 3-months storage stability, skin deposition/permeation, antioxidant potential, and morphology. Aspasomes antibacterial efficacy on Propionibacterium acnes using the zone of inhibition assay was also tested, whilst their safety on skin fibroblastic cells was assessed in vitro using 3T3 CCL92 cell lines. An exploratory clinical trial was conducted in acne patients, and the percentage reduction of inflammatory, non-inflammatory and total acne lesions was taken as the evaluation criterion. Results revealed that quercetin-loaded aspasomes displayed a desirable nanometer size (125-184 nm), negative charge with good storage stability, and high skin deposition reaching 40%. Aspasomes managed to preserve the antioxidant activity of quercetin, and exhibited a significantly higher antibacterial effect (15 ± 1.53 mm) against Propionibacterium acnes than quercetin alone (8.25 ± 2.08 mm), and were safe on skin fibroblastic cells. Upon clinical examination in 20 acne patients (14 females, 6 males), quercetin aspasomes exhibited reduction percentages of 77.9%, 11.8% and 55.3% for inflammatory lesions, comedones and total lesions respectively. This opens vast applications of the presented formulation in the treatment of other oxidative skin diseases, and delineates the nutraceuticals and nanoformulations prepared from natural materials as promising dermatological treatment modes.

Mechanistic Insights of Formulation Approaches for the Treatment of Nail Infection: Conventional and Novel Drug Delivery Approaches

Onychomycosis is a chronic disorder that is difficult to manage and hard to eradicate with perilous trends to relapse. Due to increased prevalence of HIV, use of immunosuppressant drugs and lifestyle-related factors, population affected with fungal infection of nail (Onychomycosis) happens to increase extensively in last two decades. Modalities available for the treatment of onychomycosis include systemically administered antifungals, mechanical procedures, and topical drug therapy. But the efficacy of the most of approaches to deliver drug at targeted site, i.e., deep-seated infected nail bed is limited due to compact and highly keratinized nail structure. A series of advanced formulation approaches, such as transfersomes, liposomes, nano/micro emulsion, nail lacquers etc., have been attempted to improve the drug penetration into nail plate more efficiently. The manuscript reviews these formulation approaches with their possible mechanisms by which they improve the drug penetration.Comparative analysis of available treatment modalities for onychomycosis has been provided with pros and cons of each alternatives. Additionally, ongoing research about the application of biological materials such as modified cationic antimicrobial peptides (AMPs), plant-derived proteins, and synthetic antimicrobial peptidomimetics have also been explored.

Preparation and in vivo evaluation of a highly skin- and nail-permeable efinaconazole topical formulation for enhanced treatment of onychomycosis

Onychomycosis is a progressive fungal infection of the nails that involves the deeper nail layer and nail bed. It is important to maintain sufficient drug concentration in the diseased tissues after topical application. In this study, a stable topical delivery system for efinaconazole (EFN) was designed to enhance absorption potential through the skin and nail plate by incorporating ethanol, diethylene glycol monoethyl ether (Transcutol P) and isopropyl myristate, and cyclomethicone into the topical solution as a delivery vehicle, permeation enhancers, and a wetting agent, respectively. In addition, the stability of EFN in the formulation was significantly improved by adding butylated hydroxytoluene, diethylenetriamine pentaacetic acid, and citric acid as an antioxidant, chelating agent, and pH-adjusting agent, respectively, without discoloration. The optimum EFN formulation (EFN-K) showed 1.46-fold greater human skin permeation than that of the reference control (commercial 10% EFN topical solution). Furthermore, after a 24-hour incubation, the amount of infiltrated EFN from EFN-K in the human nail plate was 4.11-fold greater than that of the reference control, resulting in an 89.7% increase in nail flux at 7 days after treatment. EFN-K significantly accelerated structural recovery of the keratin layer in a Trichophyton mentagrophytes-infected guinea pig onychomycosis model, decreasing the mean viable fungal cell count by 54.3% compared to the vehicle-treated group after once-daily treatment for 4 weeks. Thus, the accelerated skin and nail penetration effect of EFN-K is expected to achieve good patient compliance, and improve the complete cure rate of onychomycosis.

Novel Drug Delivery Strategies for the Treatment of Onychomycosis

Onychomycosis accounts for 50% of all nail disease cases and is commonly caused by dermatophytes. It was primarily considered a cosmetic problem but has been garnering attention lately due to its persistent nature and difficult treatment with relapses. With prolonged treatment duration and high cost involved in treating onychomycosis, several attempts have been made in overcoming the rigid nail barrier. The conventional treatment of onychomy-cosis involves oral and topical therapy. The oral antifungal agents though quite effective, are hepato-toxic and cause drug-drug interactions. Topical therapy is more patient compliant being devoid of such adverse effects but it suffers from another setback of improper nail penetration. Amorolfine and ciclopirox nail lacquers are popular market products. Since decades, efforts have been made to enhance topical delivery for efficiently treating ony-chomycosis. Mechanical, physical and chemical methods have been em-ployed. Despite all the attempts made, the nail delivery issues are far from be-ing solved. Recently, the focus has shifted to novel drug delivery systems like nanoparticles, microemulsions, polymeric films and nail lacquers for en-hanced drug permeation and localized therapy. The research around the world is exploring their potential as effective treatment options. This review intends to further explore the novel delivery strategies to treat a persistent fungal in-fection like onychomycosis.

Polymeric nanocapsular baicalin: Chemometric optimization, physicochemical characterization and mechanistic anticancer approaches on breast cancer cell lines

Baicalin is a multi-purpose flavonoid known for its anticancer properties, but its application is hindered by its low water solubility and bioavailability. Polymeric nanocapsules were proposed in this work as a promising system for enhancing baicalin delivery, and potentiating its anticancer properties. The characterization of nanocapsules was augmented with chemometric analysis, and the selected formulations were tested on two breast cancer cell lines (MCF-7 and MDA-MB-231), with mechanistic anticancer elucidation using MTT assay, confocal microscopy uptake, flow cytometry, mechanism of cell death, reactive oxygen species production, caspase 3/7 activity and death biomarker expression using quantitative real time PCR. Results showed that baicalin nanocapsules displayed favorable pharmaceutical properties; with the formulation variables affecting their properties elucidated using chemometric factorial analysis. Nanocapsules enhanced the anticancer activity of baicalin up to 216 times for MCF-7 cells and 31 times for MDA-MB-231 after 24 hr incubation. Cellular internalization of the fluorescently labeled nanocapsules was confirmed after 4 hr incubation for both cell lines. Apoptosis was the dominant cell death mechanism, with significant up-regulation of P53 in baicalin nanocapsules treated cells. Data here presented drive to further preclinical studies to investigate the delivery of baicalin polymeric nanocapsules and their anti-cancer activity.

Colloidal (-)-epigallocatechin-3-gallate vesicular systems for prevention and treatment of skin cancer: A comprehensive experimental study with preclinical investigation

Skin carcinogenesis is a common malignancy affecting humans worldwide, which could benefit from nutraceuticals as a solution to the drawbacks of conventional skin cancer treatment. (-)-epigallocatechin-3-gallate (EGCG) is a promising nutraceutical in this regard; however, it suffers chemical instability and low bioavailability resulting in inefficient delivery. Therefore, EGCG encapsulation in ultradeformable colloidal vesicular systems, namely: penetration enhancer-containing vesicles (PEVs), ethosomes and transethosomes (TEs) for topical administration has been attempted in this study to overcome the problems associated with the use of free EGCG. The prepared vesicles were characterized for their entrapment efficiency, TEM visualization, chemical compatibility, antioxidant properties, ex-vivo skin deposition, photodegradation and physical stability after storage. Most of the prepared vesicles exhibited reasonable skin deposition and preservation of the inherent antioxidant properties of EGCG with good physical stability. EGCG-loaded PEVs and TEs exhibited an inhibitory effect on epidermoid carcinoma cell line (A431) in addition to reduced tumor sizes in mice, confirmed with histopathological analysis and biochemical quantification of skin oxidative stress biomarkers; glutathione, superoxide dismutase and catalase, as well as lipid peroxidation. EGCG PEVs succeeded in offering an effective delivery system targeting skin cancer, which is worthy of further experimentation.

Ucuùba (Virola surinamensis) Fat-Based Nanostructured Lipid Carriers for Nail Drug Delivery of Ketoconazole: Development and Optimization Using Box-Behnken Design

Ucuùba fat is fat obtained from a plant found in South America, mainly in Amazonian Brazil. Due to its biocompatibility and bioactivity, Ucuùba fat was used for the production of ketoconazole-loaded nanostructured lipid carriers (NLC) in view of an application for the treatment of onychomycosis and other persistent fungal infections. The development and optimization of Ucuùba fat-based NLC were performed using a Box-Behnken design of experiments. The independent variables were surfactant concentration (% w/v), liquid lipids concentration (% w/v), solid lipids concentration (% w/v), while the outputs of interest were particle size, polydispersity index (PDI) and drug encapsulation efficiency (EE). Ucuùba fat-based NLC were produced and the process was optimized by the development of a predictive mathematical model. Applying the model, two formulations with pre-determined particle size, i.e., 30 and 85 nm, were produced for further evaluation. The optimized formulations were characterized and showed particle size in agreement to the predicted value, i.e., 33.6 nm and 74.6 nm, respectively. The optimized formulations were also characterized using multiple techniques in order to investigate the solid state of drug and excipients (DSC and XRD), particle morphology (TEM), drug release and interactions between the formulation components (FTIR). Furthermore, particle size, surface charge and drug loading efficiency of the formulations were studied during a one-month stability study and did not show evidence of significant modification.

Neuroprotective effects of novel nanosystems simultaneously loaded with vinpocetine and piracetam after intranasal administration

AIMS

The study aim was to test the efficacy of a novel created hybrid nanosystem compared to other nanosystems in treatment of scopolamine induced memory impairment.

MAIN METHODS

The fabrication and characterization of nanoformulations (microemulsion, liposomes, ethosomes, transfersomes and transethosomes) coencapsulating two cognitive enhancers; piracetam and vinpocetine delivered intranasally, in addition to a novel nanocomposite microemulsion/vesicular nanoformulation was described.

KEY FINDINGS

Formulations delivered the drugs across sheep nasal mucosa, with cumulative percentage reaching 29.99% for vinpocetine and 57.78% for piracetam. While the solution form of the drugs was totally ineffective, the selected transethosomal, microemulsion and nanocomposite formulations reversed the scopolamine induced effect on the step through latency of passive avoidance test and the spontaneous alternation behavior in Y maze test, further confirmed by histopathlogical examination. All three nanoformulations significantly decreased the acetylcholinesterase activity and the extent of lipid peroxidation by 32-42%. The nanocomposite formulation was superior to the microemulsion and transethosomal formulations in its anti-inflammatory and antiapoptotic effects, delineated by higher extent of inhibition of COX-2 and caspase 3 expression respectively.

SIGNIFICANCE

Results support the hypothesis that the novel microemulsion/vesicular nanocomposite system is a promising neuroprotective modality for intranasal brain targeting which is worthy of exploitation in other brain diseases.

Novel methotrexate soft nanocarrier/fractional erbium YAG laser combination for clinical treatment of plaque psoriasis

Psoriasis is a commonly encountered chronic dermatological disease, presenting with inflammatory symptoms in patients. Systemic treatment of psoriasis is associated with several adverse effects, therefore the development of a customized topical treatment modality for psoriasis would be an interesting alternative to systemic delivery. The therapeutic modality explored in this article was the comparative treatment of psoriatic patients using nanoparticulated methotrexate in the form of jojoba oil-based microemulsion with or without fractional erbium YAG laser. Assessment parameters included follow-up photography for up to 8 weeks of treatment, estimation of the psoriasis severity [TES (thickness, erythema, scales)] score, and histopathological skin evaluation. The prepared methotrexate microemulsion was clinically beneficial and safe in treatment of psoriasis vulgaris. The concomitant use of the fractional laser provided improvement in the psoriatic plaques within shorter time duration (3 weeks compared to 8 weeks of treatment), presenting an alternative topical treatment modality for psoriasis vulgaris.

Intranasally administered in situ gelling nanocomposite system of dimenhydrinate: preparation, characterization and pharmacodynamic applicability in chemotherapy induced emesis model

The aim of the current manuscript was to test the applicability of a nanocomposite system of penetration enhancer vesicles (PEVs) within polymeric in situ forming gel network composed of poloxamer and hyaluronic acid for the intranasal delivery of the antiemetic dimenhydrinate (DMH). PEVs were prepared using phospholipids and labrasol/transcutol/PEG 400 as penetration enhancers, and characterized for entrapment efficiency (EE%), particle size, zeta potential and morphology. The nanocomposite in situ forming gel system was characterized for its sol-gel temperature, viscosity and mucoadhesiveness, and was pharmacodynamically tested on a cisplatin induced emesis model in rats in terms of food, water, kaolin intake and stomach weight content. The selected PEVs formula displayed EE% of 83% for DMH, particle size of 121 nm and a surface charge of 0.83 mV. The selected nanocomposite in situ gelling formula showed a viscosity of 2.13 Pa.S, mucoadhesive force of 0.62 N and DMH controlled release over 6 hours. The pharmacodynamic study showed the superiority of the nanocomposite in situ gelling formula; being administered at a lower dose than the oral marketed formula. The described nanocomposite system proved to be successful for the intranasal delivery of DMH, thus presenting a promising delivery modality for similar antiemetics.

Voriconazole-loaded nanostructured lipid carriers (NLC) for drug delivery in deeper regions of the nail plate

Voriconazole-loaded nanostructured lipid carriers (VOR-NLC) were developed and drug penetration evaluated in porcine hooves in vitro. Synergistic effect of urea (Ur), selected among other known chemical enhancers according to hoof hydration potential, was also evaluated. VOR-NLC presented a high encapsulation efficiency (74.52±2.13%), approximate mean diameter of 230nm and were positively charged (+27.32±2.74mV). Stability studies indicated they were stable under refrigeration (4±2°C) for up to 150days. SEM images revealed hooves treated with VOR-NLC and VOR-NLC-Ur suffered a disturbance on the surface depicting high roughness and porosity. Permeation data showed a substantial VOR amount retained in superficial hooves sections independent of the formulation used (2.42±0.26; 2.52±0.36 and 2.41±0.60μg/cm² for unloaded VOR, VOR-NLC and VOR-NLC-Ur, respectively, p>0.05). Still, successive extractions, revealed the amount of VOR retained in deeper regions was significantly higher when VOR-NLC or VOR-NLC-Ur was used (0.17±0.04, 0.47±0.14 and 0.36±0.07μg/cm² for unloaded VOR, VOR-NLC and VOR-NLC-Ur, respectively, p<0.05). Such results indicate NLC are promising formulations for the management of onychomycosis. Further studies in diseased nail plates are necessary.

Phospholipid membrane tubulation using ceramide doping "Cerosomes": Characterization and clinical application in psoriasis treatment

Nanotechnology and material surface modification have provided a functional platform for the advancement of several medical fields such as dermatology. Furthermore, the smart choice of preparation material was proven to confer unique properties to the developed nanosystems. In this context, we focused on the sphingolipid "ceramide", whose deficiency was found to negatively affect psoriasis. Ceramide was doped into surfactant based vesicular phospholipid systems to create tubulated vesicles "cerosomes" loaded with a model anti-psoriatic drug "tazarotene", and their properties were tested as compared to ceramide free vesicles. Cerosomes were characterized for their drug entrapment, viscosity, in vitro drug release, morphology, ex vivo drug skin deposition, thermal behavior, and were clinically tested on psoriatic patients. The factorial design study revealed that the surfactant type, the ceramide: surfactant ratio, and the presence of ethanol in the hydration buffer affected the entrapment efficiency and the viscosity of the vesicles. Ceramide increased the entrapment of tazarotene, decreased its release while enhancing its deposition within the skin, correlating with better clinical therapeutic outcome compared to the topical marketed product. Ceramide was also able to cause significant membrane tubulation in the vesicles, causing them to deviate from the conventional spherical morphology. As a conclusion, cerosomes present a new functional treatment modality for psoriasis which is worthy of future experimentation.