Optimization of Fibrinogen Isolation for Manufacturing Autologous Fibrin Glue for Use as Scaffold in Tissue Engineering

Large-Scale Production of Wholly Cellular Bioinks via the Optimization of Human Induced Pluripotent Stem Cell Aggregate Culture in Automated Bioreactors

Combining the sustainable culture of billions of human cells and the bioprinting of wholly cellular bioinks offers a pathway toward organ-scale tissue engineering. Traditional 2D culture methods are not inherently scalable due to cost, space, and handling constraints. Here, the suspension culture of human induced pluripotent stem cell-derived aggregates (hAs) is optimized using an automated 250 mL stirred tank bioreactor system. Cell yield, aggregate morphology, and pluripotency marker expression are maintained over three serial passages in two distinct cell lines. Furthermore, it is demonstrated that the same optimized parameters can be scaled to an automated 1 L stirred tank bioreactor system. This 4-day culture results in a 16.6- to 20.4-fold expansion of cells, generating approximately 4 billion cells per vessel, while maintaining >94% expression of pluripotency markers. The pluripotent aggregates can be subsequently differentiated into derivatives of the three germ layers, including cardiac aggregates, and vascular, cortical and intestinal organoids. Finally, the aggregates are compacted into a wholly cellular bioink for rheological characterization and 3D bioprinting. The printed hAs are subsequently differentiated into neuronal and vascular tissue. This work demonstrates an optimized suspension culture-to-3D bioprinting pipeline that enables a sustainable approach to billion cell-scale organ engineering.

A fluorescence nanoplatform for the determination of hydrogen peroxide and adenosine triphosphate via tuning of the peroxidase-like activity of CuO nanoparticle decorated UiO-66

A novel nanocomposite of CuO nanoparticle-modified Zr-MOF (CuO/UiO-66) was synthesized and developed as a fluorescence nanoplatform for H₂O₂ and adenosine triphosphate (ATP) via the "turn-on-off" mode in the presence of terephthalic acid (TA). The structure of CuO/UiO-66 was thoroughly characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and other techniques. The CuO/UiO-66 with enhanced peroxidase-like (POD) activity obtained due to the Zr⁴⁺ in UiO-66 is beneficial to the aggregation of CuO NPs on its surface. As a result, the strengthened fluorescence at 425 nm with the excitation of 300 nm was found due to the highly fluorescent species of TAOH. This is produced by the oxidation of TA by ·OH that came from the catalysis of H₂O₂ via the peroxidase mimic of CuO/UiO-66. Hence the modification of CuO NPs on porous UiO-66 can provide a friendly and sensitive physiological condition for H₂O₂ detection. However, upon addition of ATP, the fluorescence intensity of TAOH at 425 nm effectively declined owing to the formation of complexation of Zr⁴⁺-ATP and the interaction of CuO to ATP which hampers the catalytic reaction of CuO/UiO-66 to H₂O₂. The specific interaction induced "inhibition of the peroxide-like activity" endows the sensitive and selective recognition of ATP. The detection limits were 16.87 ± 0.2 nM and 0.82 ± 0.1 nM, and linear analytical ranges were 0.02-100 μM and 0.002-30 μM for H₂O₂ and ATP, respectively. The novel strategy was successfully applied to H₂O₂ and ATP determination in serum samples with recoveries of 97.2-103.8% for H₂O₂ and 97.6-101.7% for ATP, enriching the avenue to design functional MOFs and providing new avenue of multicomponent bioanalysis.

Laminin-1 Peptides Conjugated to Fibrin Hydrogels Promote Salivary Gland Regeneration in Irradiated Mouse Submandibular Glands

Previous studies demonstrated that salivary gland morphogenesis and differentiation are enhanced by modification of fibrin hydrogels chemically conjugated to Laminin-1 peptides. Specifically, Laminin-1 peptides (A99: CGGALRGDN-amide and YIGSR: CGGADPGYIGSRGAA-amide) chemically conjugated to fibrin promoted formation of newly organized salivary epithelium both in vitro (e.g., using organoids) and in vivo (e.g., in a wounded mouse model). While these studies were successful, the model's usefulness for inducing regenerative patterns after radiation therapy remains unknown. Therefore, the goal of the current study was to determine whether transdermal injection with the Laminin-1 peptides A99 and YIGSR chemically conjugated to fibrin hydrogels promotes tissue regeneration in irradiated salivary glands. Results indicate that A99 and YIGSR chemically conjugated to fibrin hydrogels promote formation of functional salivary tissue when transdermally injected to irradiated salivary glands. In contrast, when left untreated, irradiated salivary glands display a loss in structure and functionality. Together, these studies indicate that fibrin hydrogel-based implantable scaffolds containing Laminin-1 peptides promote secretory function of irradiated salivary glands.

Progress of Nanotechnology in Diabetic Retinopathy Treatment

Diabetic retinopathy (DR) is a chronic diabetes complication that progressively manifests itself as blurred vision, eye floaters, distorted vision, and even partial or total loss of vision as a result of retinal detachment in severe cases. Clinically, patients who have undergone variations in the microcirculation of the ocular fundus are treated with laser photocoagulation to improve the circulation of retina; but for patients with macular edema, anti-vascular endothelial growth factor (anti-VEGF) drugs are generally injected to eliminate macular edema and improve vision. The worst cases are patients with fundus hemorrhage or proliferative vitreoretinopathy, for whom vitrectomy has been performed. At present, these clinical treatment methods have widely been used, providing satisfactory results. However, considering the low bioavailability and potential side effects of drugs and the inevitable risks in major surgery, DR prevention, and treatment as well as nerve tissue regeneration in the later stage have always been the focus of research. In recent years, nanotechnology has been increasingly applied in the medical field, leading to new ideas for DR treatment. This study aims to systematically review the research progress of nanotechnology in DR treatment.

Hidrogeles de colágeno acoplados con hidroxiapatita para aplicaciones en ingeniería tisular

Los hidrogeles basados en colágeno son redes tridimensionales (3D) con la capacidad de absorber agua y una alta biocompatibilidad para utilizarlos en la reparación de tejidos dañados. Estos materiales presentan pobres propiedades mecánicas y velocidades de degradación rápidas, limitando su aplicación a estrategias de ingeniería tisular y biomedicina; por ésto, la incorporación de fases inorgánicas en la matriz 3D del colágeno como la hidroxiapatita ha contribuido en la mejora de sus propiedades, incrementado la eficiencia de los hidrogeles híbridos obtenidos. Este trabajo, presenta las contribuciones más relevantes relacionadas con los sistemas de hidrogeles basados en colágeno y partículas de hidroxiapatita dispersas dentro de la matriz colagénica, lo que evidencia que la combinación de los materiales no altera la biocompatibilidad y biodegradabilidad típicas del colágeno, permitiendo la adhesión, proliferación, crecimiento celular y control del metabolismo de las células implicadas en los procesos de una reparación ósea, presentando a los hidrogeles como una estrategia para su uso potencial en la ingeniería tisular.

Cell-free macro-porous fibrin scaffolds for in situ inductive regeneration of full-thickness cartilage defects

Macro-porous fibrin scaffold was fabricated and used to induce cartilage regenerationin situwithout pre-loaded cells or growth factors.

Fibrin-based tissue engineering: comparison of different methods of autologous fibrinogen isolation

OBJECTIVE

This study is focussed on the optimal method of autologous fibrinogen isolation with regard to the yield and the use as a scaffold material. This is particularly relevant for pediatric patients with strictly limited volumes of blood.

MATERIALS AND METHODS

The following isolation methods were evaluated: cryoprecipitation, ethanol (EtOH) precipitation, ammonium sulfate [(NH(4))(2)SO(4))] precipitation, ammonium sulfate precipitation combined with cryoprecipitation, and polyethylene glycol precipitation combined with cryoprecipitation. Fibrinogen yields were quantified spectrophotometrically and by electrophoretic analyses. To test the influence of the different isolation methods on the microstructure of the fibrin gels, scanning electron microscopy (SEM) was used and the mechanical strength of the cell-free and cell-seeded fibrin gels was tested by burst strength measurements. Cytotoxicity assays were performed to analyze the effect of various fibrinogen isolation methods on proliferation, apoptosis, and necrosis. Tissue development and cell migration were analyzed in all samples using immunohistochemical techniques. The synthesis of collagen as an extracellular matrix component by human umbilical cord artery smooth muscle cells in fibrin gels was measured using hydroxyproline assay.

RESULTS

Compared to cryoprecipitation, all other considered methods were superior in quantitative analyses, with maximum fibrinogen yields of ∼80% of total plasma fibrinogen concentration using ethanol precipitation. SEM imaging demonstrated minor differences in the gel microstructure. Ethanol-precipitated fibrin gels exhibited the best mechanical properties. None of the isolation methods had a cytotoxic effect on the cells. Collagen production was similar in all gels except those from ammonium sulfate precipitation. Histological analysis showed good cell compatibility for ethanol-precipitated gels.

CONCLUSION

The results of the present study demonstrated that ethanol precipitation is a simple and effective method for isolation of fibrinogen and a suitable alternative to cryoprecipitation. This technique allows minimization of the necessary blood volume for fibrinogen isolation, particularly important for pediatric applications, and also has no negative influence on microstructure, mechanical properties, cell proliferation, or tissue development.