Methods for in Vitro Skin Metabolism Studies

Human Skin Drug Metabolism: Relationships between Methyl Salicylate Metabolism and Esterase Activities in IVPT Skin Membranes

The presence of esterase enzymes in human skin and their role in drug metabolism has been reported, but their distribution in the various skin layers and the relative contributions of those layers to metabolism is poorly defined. To gain further insight into esterase distribution, we performed in vitro skin permeation of a commercial 28.3% methyl salicylate (MeSA) cream (Metsal™) in Franz diffusion cells, using a range of human skin membranes, all from the same donor. The membranes were viable epidermis separated by a dispase II enzymatic method, heat separated epidermis, dermatomed skin, and dermis separated by a dispase II enzymatic method. Methyl salicylate and its metabolite, salicylic acid (SA), were measured by high-performance liquid chromatography. Alpha naphthyl acetate and Hematoxylin and Eosin staining provided qualitative estimations of esterase distribution in these membranes. The permeation of methyl salicylate after 24 h was similar across all membranes. Salicylic acid formation and permeation were found to be similar in dermatomed skin and dermis, suggesting dermal esterase activity. These results were supported by the staining studies, which showed strong esterase activity in the dermal-epidermal junction region of the dermis. In contrast with high staining of esterase activity in the stratum corneum and viable epidermis, minimal stained and functional esterase activity was found in heat-separated and dispase II-prepared epidermal membranes. The results are consistent with dispase II digesting hemidesmosomes, penetrating the epidermis, and affecting epidermal esterases but not those in the dermis. Accordingly, whilst the resulting dispase II-generated dermal membranes may be used for in vitro permeation tests (IVPT) involving esterase-based metabolic studies, the dispase II-generated epidermal membranes are not suitable for this purpose.

Formulation of survival acceptor medium able to maintain the viability of skin explants over in vitro dermal experiments

OBJECTIVE

In vitro assessments of skin absorption of xenobiotics are essential for toxicological evaluations and bioavailability studies of cosmetic and pharmaceutical ingredients. Since skin metabolism can greatly contribute to xenobiotic absorption, experiments need to be performed with skin explants kept viable in suitable survival media. Existing protocols for non-viable skin are modified to consider those conditions. The objective was to design a survival medium used as an acceptor fluid in Franz cells for testing cutaneous penetration of hydrophilic or lipophilic molecules. Their metabolism inside skin may be investigated under the same conditions. The determining factors involved in survival mechanisms in vitro are discussed. The consequences of short-term skin preservation at 4°C were also evaluated.

METHODS

The metabolic activity of fresh skin samples mounted in Franz cells was studied by measurement of lactate release over 24 h in order to assess the impacts of pH, buffering, osmolality, ionic strength, initial glucose supply and the addition of ethanol or non-ionic surfactant in the acceptor part of Franz cells.

CONCLUSION

Survival media must maintain physiological pH (>5.5) be isotonic with skin cells (300 mOsm kg^-1 ) and contain at least 0.5 g L^-1 glucose. Several compositions able to preserve skin metabolism are reported. Storage of skin explants overnight at 4°C impairs skin metabolic activity. The present work provides guidelines for designing survival media according to constraints related to the scientific requirements of the experiments.

Basic considerations in the dermatokinetics of topical formulations

Assessing the bioavailability of drug molecules at the site of action provides better insight into the efficiency of a dosage form. However, determining drug concentration in the skin layers following topical application of dermatological formulations is a great challenge. The protocols followed in oral formulations could not be applied for topical dosage forms. The regulatory agencies are considering several possible approaches such as tape stripping, microdialysis etc. On the other hand, the skin bioavailability assessment of xenobiotics is equally important for topical formulations in order to evaluate the toxicity. It is always possible that drug molecules applied on the skin surface may transport thorough the skin and reaches systemic circulation. Thus the real time measurement of molecules in the skin layer has become obligatory. In the last two decades, quite a few investigations have been carried out to assess the skin bioavailability and toxicity of topical/dermatological products. This review provides current understanding on the basics of dermatokinetics, drug depot formation, skin metabolism and clearance of drug molecules from the skin layers following application of topical formulations.

Contaminated soils (I): In vitro dermal absorption of benzo[a]pyrene in human skin

Dermal absorption of the lipophile and potential carcinogen benzo[a]pyrene (BaP) in soils from contaminated sites was simulated in vitro using human skin exposed to 14C-BaP-spiked soil. This study is the first in a series of tests at Health Canada with several soil contaminants spanning a wide range of lipophilicity conducted with viable human skin. Breast skin was obtained fresh from a local hospital and dermatomed to a thickness of 0.4-0.5 mm. Teflon Bronaugh diffusion cells were perfused with HEPES buffered Hanks saline (pH 7.4) with 4% bovine serum albumin (BSA) and fractions were collected at 6-h intervals for up to 24 h exposure either to 14C-BaP applied in acetone or spiked in a commercial gardening soil. As skin depot 14C levels were still high at 24 h, the study was repeated for up to 42 h to examine skin depot bioavailability. Skin was washed with soapy water at 24 h in both the 24- and 42-h studies. Exposure to 14C-BaP both with and without soil was conducted in triplicate with skin specimens from at least 4 patients. In the 24-h exposure tests including the skin depot there was 15 and 56% absorption with and without soil, respectively. The lower total percent absorption from the spiked soil applied to skin resulted from lower depot absorption of 8% with and 45% without soil. Data for 42-h studies were similar and revealed no significant decrease in skin depot levels. Including the 42-h depots there was 16 and 50% absorption with and without soil, respectively, with respective depots of 7 and 39%. As there was no significant difference between the 24- and 42-h depots both with and without soil, the data suggest the depot for BaP was not bioavailable for at least the additional 18-h post soap wash exposure. The bioavailability of BaP is discussed in relation to previous in vitro and in vivo studies in perspective with dermal exposure to contaminated soils.

In vitro permeation of chromium species through porcine and human skin as determined by capillary electrophoresis–inductively coupled plasma–sector field mass spectrometry

Since the species that trigger chromium allergy are not yet known, it is important to gain more of an insight into the mechanism of chromium transport through the skin and into the relationship between chromium allergy and chromium species. In vitro permeation studies with porcine and human skin were performed using a Franz static diffusion cell. Investigations attempted to elucidate (i) which Cr compounds are able to permeate through skin, (ii) the influence the Cr concentration in the donor solution has on the Cr permeation, and (iii) the effect that the time of exposure to the donor solution has on Cr permeation. Capillary electrophoresis hyphenated to inductively coupled plasma-sector field mass spectrometry (CE-ICP-SFMS) was used to separate and quantify the Cr species in the receptor fluid. 50 mmol L(-1) phosphate buffer (pH 2.5) was used for CE separation, and two different electrophoretic runs were carried out (in the positive and negative modes). Pneumatic nebulization (PN)-ICP-SFMS was used in order to quantify the total amount of Cr absorbed by the skin after microwave-assisted acid digestion of the tissue. Cr(VI) was found to pass most easily through the skin. Nevertheless, Cr(VI) was also shown to be absorbed more efficiently by the skin than Cr(III), an observation attributed to a more pronounced rejection of the positively charged Cr(III) ions by the skin barrier. These results were in good agreement with in vitro permeation studies previously reported in the literature in which other analytical techniques were used. Differences observed in the permeation of Cr following the application of aqueous Cr donor solutions and Cr-containing simulated sweat donor solutions are also described.

Percutaneous penetration of N-nitroso-N-methyldodecylamine through human skin in vitro: application from cosmetic vehicles

The human skin penetration of N-nitroso-N-methyldodecylamine (NDOMA) from isopropyl myristate (IPM) and two vehicles representative of cosmetic/personal care formulations was determined in vitro. When applied as an infinite dose in IPM (1 microgram/microliter) the average total absorption over 48 hr was 0.10 +/- 0.01% of the applied dose (all data are expressed as means +/- SE). When applied as a finite dose in a representative oil-in-water emulsion formulation the average total absorption over 48 hr was 4.66 +/- 0.76% of the applied dose. When applied as a finite dose in a representative shampoo formulation for 10 min, followed by rinsing (to represent in-use exposure conditions), the average total absorption over 48 hr was 0.75 +/- 0.17% of the applied dose. Approximately 72% of the NDOMA in the applied shampoo formulation was removed by rinsing. The overall data indicated that NDOMA could penetrate the skin but that penetration was low. The rate and extent of absorption, however, could be affected by differences in the vehicle of application, time of exposure and whether the formulation is (and the conditions are designed to mimic) a rinse-off or leave-on product.